Extraction and purification of a highly thermostable alkaline caseinolytic protease from wastes Penaeus vannamei suitable for food and detergent industries

Structures and properties of α-amylase and glucoamylase immobilized by ZIF-8 via one-pot preparation

The immobilization of α-amylase and glucoamylase using a metal-organic framework (enzyme@ZIF-8) was prepared in situ through a one-pot method. The morphology, crystal structure, and molecular characteristics of the free enzyme and enzyme@ZIF-8 were characterized. The enzyme@ZIF-8 exhibited the rhombic dodecahedron morphology, with a decrease in particle size. Successful immobilization of α-amylase and glucoamylase within ZIF-8 was confirmed, with 30-40 % loading rate. The immobilization process did not significantly alter the crystal structure of ZIF-8. The changes in secondary structure of enzyme after immobilization resulted in modification of catalytic activity of enzyme. The melting enthalpy of enzyme @ZIF-8 increased with the increase of enzyme content. The melting peak temperature of the enzyme immobilized by ZIF-8 increased. The activity of free and immobilized enzymes was influenced by the different time, pH and temperature. At pH 5-8 and temperature 60-80 °C, the activity of the immobilized enzyme was significantly greater than that of the free enzyme. The repeatability of enzyme@ZIF-8 was 61.52 % after three cycles. The kinetic parameters of Michaelis-Menten model for enzymatic reaction were determined by fitting the initial rate of reactions and initial substrate concentration data. The Michaelis-Menten constant (KM) values of immobilized enzyme were lower than that of free enzyme, indicating the greater affinity between the enzyme and the substrate.

Comparing the effectiveness of curcumin and papain in wound dresses based on chitosan nanoparticle

In this study, chitosan/curcumin (CS/Cur) and chitosan/papain (CS/Pa) nanoparticles were prepared and then characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), and differential light scattering (DLS). Subsequently, release rate, porosity, swelling, degradability, anti-inflammatory, antioxidant, antibacterial, and cell viability tests were conducted to investigate and compare the healing potential of the nanoparticles for various types of wounds. The results of FTIR, XRD, and DLS indicated that the nanoparticles were manufactured correctly with a hydrodynamic diameter of 429 nm (CS/Cur) and 460 nm (CS/Pa), and zeta potential of 4.32 mV (CS/Cur) and 7.57 mV (CS/Pa). The release rate results indicated a higher release rate in a basic environment (pH 8.4) for curcumin, a higher release rate for papain in an acidic environment (pH 6.4), and the Korsmeyer-Peppas model for the release of curcumin and papain. The results indicated that CS/Cur with 41.6% antioxidant activity, high antibacterial effect, and cell growth up to 616% during 7 days, was more effective than CS/Pa. In comparison, CS/Pa (with a porosity of 70.5% and a swelling rate of 1392%) was more advantageous than CS/Cur in terms of porosity and swelling. In addition, CS/Cur was as effective as CS/Pa in terms of degradation and anti-inflammatory properties. In conclusion, the outcomes represented that the CS/Cur and CS/Pa nanoparticles improved wound healing, and each was suitable for specific wounds and wound healing stages.

Effect of different thermal processing methods on sensory, nutritional, physicochemical and structural properties of Penaeus vannamei

The aim of this study was to investigate the effect of different thermal processing methods on the nutritional and physicochemical qualities of Penaeus vannamei. Three different thermal processing methods, namely, drying (DS, 120 °C/40 min), steaming (SS, 100 °C/2 min), and microwaving (MS, 600 W/2 min) were used to treat the shrimps. Low-field nuclear magnetic resonance data indicated that fixed water was the main component of Penaeus vannamei. The ratio of fatty acids in MS and DS samples was more in line with the FAO/WHO recommended health requirements; The myofibrillar protein carbonyl group increased, whereas sulfhydryl content decreased after thermal processing, indicating that the proteins were oxidized by thermal processing. The magnitude of oxidation is: MS > SS > DS. Different thermal processing methods can exert great influence on color texture and nutrition to Penaeus vannamei, which can provide a theoretical knowledge for consumers to choose the appropriate processing method.

A newly synthesized magnetic nanoparticle coated with glycidyl methacrylate monomer and 1,2,4-Triazole: Immobilization of α-Amylase from Bacillus licheniformis for more reuse, stability, and activity in the presence of H2O2

α-Amylase is a secretory enzyme commonly found in nature. The α-Amylase enzyme catalyzes the hydrolysis of α-D-(1,4)-glucosidic bonds in starch, glycogen, and polysaccharides. The chemical characterization of the composite carrier and the immobilized enzyme was performed, and the accuracy of the immobilization was confirmed by FTIR, SEM, and EDS analyses. The X-ray diffraction (XRD) analysis indicates that the magnetic nanoparticle retained its magnetic properties following the modification process. Based on the Thermogravimetric Analysis (TGA) outcomes, it was evident that the structural integrity of the FPT nanocomposite remained unchanged at 200°C. The optimal pH was determined to be 5.5, and no alteration was observed following the immobilization process. Purified α-amylases usually lose their activity rapidly above 50°C. In this study, Bacillus licheniformis α-Amylase enzyme was covalently immobilized on the newly synthesized magnetic composite carrier having more azole functional group. For novelty-designed immobilized enzymes, while there is no change in the pH and optimum operating temperature of the enzyme with immobilization, two essential advantages are provided to reduce enzyme costs: the storage stability and reusability are increased. Furthermore, our immobilization technique enhanced enzyme stability when comparing our immobilized enzyme with the reference enzyme in industrial applications. The activity of the immobilized enzyme was higher in presence of 1-3% H2O2.

Dissecting dual specificity: Identifying key residues in L-asparaginase for enhanced acute lymphoid leukemia therapy and reduced adverse effects

L-asparaginase from Escherichia coli (EcA) has been used for the treatment of acute lymphoid leukemia (ALL) since the 1970s. Nevertheless, the enzyme has a second specificity that results in glutaminase breakdown, resulting in depletion from the patient's body, causing severe adverse effects. Despite the huge interest in the use of this enzyme, the exact process of glutamine depletion is still unknown and there is no consensus regarding L-asparagine hydrolysis. Here, we investigate the role of T12, Y25, and T89 in asparaginase and glutaminase activities. We obtained individual clones containing mutations in the T12, Y25 or T89 residues. After the recombinant production of wild-type and mutated EcA, The purified samples were subjected to structural analysis using Nano Differential Scanning Fluorimetry, which revealed that all samples contained thermostable molecules in their active structural conformation, the homotetramer conformation. The quaternary conformation was confirmed by DLS and SEC. The activity enzymatic assay combined with molecular dynamics simulation identified the contribution of T12, Y25, and T89 residues in EcA glutaminase and asparaginase activities. Our results mapped the enzymatic behavior paving the way for the designing of improved EcA enzymes, which is important in the treatment of ALL.

Structure-Guided Engineering of a Protease to Improve Its Activity under Cold Conditions

Bacillus proteases commonly exhibit remarkably reduced activity under cold conditions. Herein, we employed a tailored combination of a loop engineering strategy and iterative saturation mutagenesis method to engineer two loops for substrate binding at the entrance of the substrate tunnel of a protease (bcPRO) from Bacillus clausii to improve its activity under cold conditions. The variant MT6 (G95P/A96D/S99W/S101T/P127S/S126T) exhibited an 18.3-fold greater catalytic efficiency than the wild-type (WT) variant at 10 °C. Molecular dynamics simulations and dynamic tunnel analysis indicated that the introduced mutations extended the substrate-binding pocket volume and facilitated extra interactions with the substrate, promoting catalysis through binding in a more favorable conformation. This study provides insights and strategies relevant to improving the activities of proteases and supplies a novel protease with enhanced activity under cold conditions for the food industry to maintain the initial flavor and color of food and reduce energy consumption.

Thermostable ficin from jelly fig (Ficus pumila var. awkeotsang) latex: purification, identification and characterization

BACKGROUND

The achenes/seeds of endemic jelly fig (Ficus pumila var. awkeotsang) fruit have been applied to prepare a traditional beverage in Taiwan. Upon fruit harvest, jelly fig latex exuded from stalks was discarded. Protease activity was monitored in its latex. Proteases capable of hydrolyzing proteins have many application aspects based on diverse characteristics. Commercial plant proteases are frequently from latex.

RESULTS

The latex protease of jelly fig, termed FaFicin, was purified to homogeneity with a molecular mass of ~32 kDa on sodium dodecyl sulfate-polyacrylamide gel electrophoresis. According to liquid chromatographic-tandem mass spectrometric analyses, the expected protein band of protease was matched to ficin A, ficin B or chymopapain from common fig or papaya. Iodoacetamide, an inhibitor of cysteine protease, inhibited its protease activity completely. Hence FaFicin was identified as a papain-like cysteine protease (PLCP), exhibiting more than 80% and 70% activity as assayed at pH 5-8 and 40-70 °C, respectively. It maintained ~89% of initial activity after 120 min at 55 °C and pH 7. Moreover, FaFicin could degrade the myosin and actin of meat, and clot milk.

CONCLUSION

The ficin FaFicin was obtained, purified and identified as a PLCP member from agricultural waste: jelly fig latex. It possessed activity under a wide range of pH values and temperature, and exhibited excellent thermostability. Based on its initial evaluation as a meat tenderizer and milk clotting reagent, the application of FaFicin was possible, which may extend utilization of jelly fig. © 2022 Society of Chemical Industry.

Enhanced Extracellular Expression of a Ca2+- and Mg2+-Dependent Hyperthermostable Protease EA1 in Bacillus subtilis via Systematic Screening of Optimal Signal Peptides

Proteases have been widely applied in various industries, including tanning, silk, feed, medicine, food, and environmental protection. Herein, the protease EA1 (GenBank accession no. U25630.1) was successfully expressed in Bacillus subtilis and demonstrated to function as a Ca²⁺- and Mg²⁺-dependent hyperthermostable neutral protease. At 80 °C, its half-life (t_1/2) in the presence of 10 mM Mg²⁺ and Ca²⁺ was 50.4-fold longer than that in their absence (7.4 min), which can be explained by structural analysis. Compared with the currently available commercial proteases, protease EA1 has obvious advantages in heat resistance. The largest peptide library was used to enhance the extracellular expression of protease EA1 via constructing and screening 244 signal peptides (SPs). Eleven SPs with high yields of protease EA1 were identified from 5000 clones using a high-throughput assay. Specifically, the enzyme activity of protease produced by the strain (217.6 U/mL) containing the SP XynD was 5.2-fold higher than that of the strain with the initial SP. In brief, the protease is a potential candidate for future use in the high-temperature industry.

Biochemical Characterization and Elucidation of the Hybrid Action Mode of a New Psychrophilic and Cold-Tolerant Alginate Lyase for Efficient Preparation of Alginate Oligosaccharides

Alginate lyases with unique biochemical properties have irreplaceable value in food and biotechnology industries. Herein, the first new hybrid action mode Thalassotalea algicola-derived alginate lyase gene (TAPL7A) with both psychrophilic and cold-tolerance was cloned and expressed heterologously in E. coli. With the highest sequence identity (43%) to the exolytic alginate lyase AlyA5 obtained from Zobellia galactanivorans, TAPL7A was identified as a new polysaccharide lyases family 7 (PL7) alginate lyase. TAPL7A has broad substrate tolerance with specific activities of 4186.1 U/mg, 2494.8 U/mg, 2314.9 U/mg for polyM, polyG, and sodium alginate, respectively. Biochemical characterization of TAPL7A showed optimal activity at 15 °C, pH 8.0. Interestingly, TAPL7A exhibits both extreme psychrophilic and cold tolerance, which other cold-adapted alginate lyase do not possess. In a wide range of 5–30 °C, the activity can reach 80–100%, and the residual activity of more than 70% can still be maintained after 1 h of incubation. Product analysis showed that TAPL7A adopts a hybrid endo/exo-mode on all three substrates. FPLC and ESI-MS confirmed that the final products of TAPL7A are oligosaccharides with degrees of polymerization (Dps) of 1–2. This study provides excellent alginate lyase candidates for low-temperature environmental applications in food, agriculture, medicine and other industries.

Emerging trends in environmental and industrial applications of marine carbonic anhydrase: a review

Biocatalytic conversion of greenhouse gases such as carbon dioxide into commercial products is one of the promising key approaches to solve the problem of climate change. Microbial enzymes, including carbonic anhydrase, NAD-dependent formate dehydrogenase, ribulose bisphosphate carboxylase, and methane monooxygenase, have been exploited to convert atmospheric gases into industrial products. Carbonic anhydrases are Zn²⁺-dependent metalloenzymes that catalyze the reversible conversion of CO₂ into bicarbonate. They are widespread in bacteria, algae, plants, and higher organisms. In higher organisms, they regulate the physiological pH and contribute to CO₂ transport in the blood. In plants, algae, and photosynthetic bacteria carbonic anhydrases are involved in photosynthesis. Converting CO₂ into bicarbonate by carbonic anhydrases can solidify gaseous CO2, thereby reducing global warming due to the burning of fossil fuels. This review discusses the three-dimensional structures of carbonic anhydrases, their physiological role in marine life, their catalytic mechanism, the types of inhibitors, and their medicine and industry applications.

Understanding the Basis of Occurrence, Biosynthesis, and Implications of Thermostable Alkaline Proteases

The group of hydrolytic enzymes synonymously known as proteases is predominantly most favored for the class of industrial enzymes. The present work focuses on the thermostable nature of these proteolytic enzymes that occur naturally among mesophilic and thermophilic microbes. The broad thermo-active feature (40-80 °C), ease of cultivation, maintenance, and bulk production are the key features associated with these enzymes. Detailing of contemporary production technologies, and controllable operational parameters including the purification strategies, are the key features that justify their industrial dominance as biocatalysts. In addition, the rigorous research inputs by protein engineering and enzyme immobilization studies add up to the thermo-catalytic features and application capabilities of these enzymes. The work summarizes key features of microbial proteases that make them numero-uno for laundry, biomaterials, waste management, food and feed, tannery, and medical as well as pharmaceutical industries. The quest for novel and/or designed and engineered thermostable protease from unexplored sources is highly stimulating and will address the ever-increasing industrial demands.

Proteomics analysis of the bio-functions of Dregea sinensis stems provides insights regarding milk-clotting enzyme

Dregea sinensis (D. sinensis) stems have traditionally been used as milk coagulant in Dali of Yunnan Province, China. In this study, proteomics was used to investigate the bio-functions of D. sinensis stem proteins, leading to the purification and identification of the milk-clotting enzyme. A total of 205 proteins mainly involved in the catalytic and metabolic processes were identified, of which 28 proteins exhibited hydrolase activity. Among the 28 proteins, we focused on two enzymes (M9QMC9 and B7VF65). Based on proteomics, a cysteine protease (M9QMC9) with a molecular weight of 25.8 kDa and milk-clotting activity was purified from D. sinensis stems using double ammonium sulfate precipitation and was confirmed using liquid chromatography-mass spectrometry (LC-MS/MS). The milk-clotting temperature using the purified enzyme was around 80 °C (specific activity at 314.38 U/mg), and it was found to be stable in the pH range of 6-9 in NaCl concentration of <0.8 mol/L. These findings indicated that the enzyme isolated from D. sinensis stems has potential in the dairy and food sectors, especially in the cheese-making industry.

Escherichia coli strain engineering for enhanced production of serratiopeptidase for therapeutic applications

Serratiopeptidase is an extracellular zinc-containing metalloprotease that is produced by Serratia marcescens having molecular weight of about 53kD. It has shown therapeutic (anti-inflammatory, anti-fibrinolytic and analgesic) as well as industrial applications (detergents, food processing, leather, paper and brewing etc.). The evolution of Serratia marcescens as an opportunistic pathogen associated with various infections has led researchers to think and develop an alternate strategy for its industrial production. The study presents successful cloning, expression and purification of active serratiopeptidase, using Escherichia coli BL21 [DE3] and pET SUMO vector followed by optimization of synthetic media and culture conditions for enhanced serratiopeptidase production. Initial optimization of physical parameters was done followed by a screening of different carbon and nitrogen sources. The significant media components for serratiopeptidase production as shown by factorial screening experiment were subjected to Response Surface Methodology (RSM) based optimization. The optimized media yielded 86 mg L^-1 of biologically active refolded serratiopeptidase from 20 g L^-1 wet weight of induced pellet as predicted by the equation. The success of the application of a statistical model for designing an optimized media for enhanced serratiopeptidase production also suggests a new insight for the scale-up of serratiopeptidase towards industrial applications.

Penaeus vannamei protease activating mechanism of sulfhydryl reducing compounds

For the very first time, protease enzyme from Penaeus vannamei was investigated for its activation with thiol reductant compounds. The mechanism by which sulfhydryl reductant compounds enhances the activity of P. vannamei protease still remains unclear. In this study, it was discovered that thiol-reactive compounds increase P. vannamei protease activity by a factor of about 4 with increasing V_max and decreasing Km parameters. Moreover, the reaction is an S_N2-type that does not require the initial binding of the thiol group of these compounds to the enzyme. Additionally, k₂ increased appreciably with increasing concentration of sulfhydryl reductant compounds. The linearity of this plot indicates that k₁ is unaffected by the addition of thiol compounds. Hence, the observed effect of thiol compounds on K_m seems to be due to an increase in k₂. These results suggest that the activation mechanism of P. vannamei protease almost certainly takes place by an S_N2 reaction mechanism.

Penaeus vannamei protease stabilizing process of ZnS nanoparticles

The protease enzyme purified from the Penaeus vannamei shrimp has unique properties, so improving the stability of this enzyme can improve their practical applications. In this study, ZnS nanoparticles, which have special properties for enzyme immobilization, were synthesized using a chemical precipitation method, and Penaeus vannamei protease was successfully immobilized on them. The size, structure, and morphology of the ZnS nanoparticles, and the immobilization of the protease were studied, using Transmission Electron Microscopy (TEM), Fourier Transform Infrared (FT-IR) spectroscopy, UV-Vis spectroscopy and Dynamic Light Scattering (DLS) analysis. We show that the immobilized enzyme has improved functionality at high temperatures, extreme pH conditions (pH3 and 12), and during storage. Immobilization increased the optimum temperature range of the enzyme, but did not change the pH optimum, which remained at pH7. Immobilization of P. vannamei protease enzyme increased the K_m and decreased k_cat/K_m. These results indicate that P. vannamei protease immobilized on ZnS nanoparticles, has improved properties due to its high stability and unique properties, can be used for biotechnology applications.