Determination of free fatty acids in beer

The Potential of Co-Fermentation with Pichia kluyveri and Saccharomyces cerevisiae for the Production of Low-Alcohol Craft Beer

The potential health impacts of moderate alcohol consumption have long been debated. The COVID-19 pandemic has heightened public awareness of health concerns, creating a clear market opportunity for low-alcohol craft beer development. This study investigated the possibility of low-alcohol craft beer by co-fermentation with different ratios of Pichia kluyveri (P. kluyveri) and Saccharomyces cerevisiae (SC) according to the established quality indexes. Specifically, this study was conducted to identify the low-alcohol craft beer quality by fermentation kinetics, growth kinetics, apparent attenuation (AA), real attenuation (RA), residual sugar content, alcohol by volume (ABV), and volatile organic compounds. This study demonstrated that the co-fermentation of SC and P. kluyveri in a 1:10 ratio produced an ABV of 2.98% (v/v). In addition, high concentrations of isoamyl acetate and phenyl ethyl acetate revealed banana, rose, apple, and honey flavors, respectively. Overall, this study revealed that the fermentation of P. kluyveri and SC by co-fermentation and the fermentation process by adjusting the yeast composition developed a craft beer with low alcohol content and rich aroma while establishing the quality indicators.

Application of Sorbent-Based Extraction Techniques in Food Analysis

This review presents an outline of the application of the most popular sorbent-based methods in food analysis. Solid-phase extraction (SPE) is discussed based on the analyses of lipids, mycotoxins, pesticide residues, processing contaminants and flavor compounds, whereas solid-phase microextraction (SPME) is discussed having volatile and flavor compounds but also processing contaminants in mind. Apart from these two most popular methods, other techniques, such as stir bar sorptive extraction (SBSE), molecularly imprinted polymers (MIPs), high-capacity sorbent extraction (HCSE), and needle-trap devices (NTD), are outlined. Additionally, novel forms of sorbent-based extraction methods such as thin-film solid-phase microextraction (TF-SPME) are presented. The utility and challenges related to these techniques are discussed in this review. Finally, the directions and need for future studies are addressed.

Assessment of the impact of unmalted cereals, hops, and yeast strains on volatolomic and olfactory profiles of Blanche craft beers: A chemometric approach

This study investigated the impact of changes in craft beer formulation, by modifying the unmalted cereal [(durum (Da) and soft (Ri) wheat), emmer (Em)], hops [Cascade (Ca) and Columbus (Co)], and yeast strains [M21 (Wi) - M02 (Ci)], on volatolomic, acidic, and olfactory profiles. Olfactory attributes were evaluated by the trained panel. Volatolomic and acidic profiles were determined by GC-MS. The sensory analysis detected significant differences for 5 attributes, including olfactory intensity and finesse, malty, herbaceous, and floral notes. Multivariate analysis of volatiles data, showed significant differences among the samples (p < 0.05). DaCaWi, DaCoWi, and RiCoCi beers differ from the others by their higher concentrations of esters, alcohols, and terpenes. A PLSC analysis was carried out between volatiles and odour attributes. As far as we know, this is the first investigation that shed light on the impact of 3-factors interaction on the sensory-volatolomic profile of craft beers, through a comprehensive multivariate approach.

Variation in quality of grains used in malting and brewing

Cereal grains have been domesticated largely from food grains to feed and malting grains. Barley (Hordeum vulgare L.) remains unparalleled in its success as a primary brewing grain. However, there is renewed interest in "alternative" grains for brewing (and distilling) due to attention being placed on flavor, quality, and health (i.e., gluten issues) aspects that they may offer. This review covers basic and general information on "alternative grains" for malting and brewing, as well as an in-depth look at several major biochemical aspects of these grains including starch, protein, polyphenols, and lipids. These traits are described in terms of their effects on processing and flavor, as well as the prospects for improvement through breeding. These aspects have been studied extensively in barley, but little is known about the functional properties in other crops for malting and brewing. In addition, the complex nature of malting and brewing produces a large number of brewing targets but requires extensive processing, laboratory analysis, and accompanying sensory analysis. However, if a better understanding of the potential of alternative crops that can be used in malting and brewing is needed, then significantly more research is required.

Interactions between Beer Compounds and Human Salivary Proteins: Insights toward Astringency and Bitterness Perception

Beer is one of the most consumed beverages worldwide with unique organoleptic properties. Bitterness and astringency are well-known key features and, when perceived with high intensity, could lead to beer rejection. Most studies on beer astringency and bitterness use sensory assays and fail to study the molecular events that occur inside the oral cavity responsible for those perceptions. This work focused on deepening this knowledge based on the interaction of salivary proteins (SP) and beer phenolic compounds (PCs) and their effect toward these two sensory attributes. The astringency and bitterness of four different beers were assessed by a sensory panel and were coupled to the study of the SP changes and PC profile characterization of beers. The human SP content was measured before (basal) and after each beer intake using HPLC analysis. The beers’ PC content and profile were determined using Folin–Ciocalteu and LC-MS spectrometry, respectively. The results revealed a positive correlation between PCs and astringency and bitterness and a negative correlation between SP changes and these taste modalities. Overall, the results revealed that beers with higher PC content (AAL and IPA) are more astringent and bitter than beers with a lower PC content (HL and SBO). The correlation results suggested that an increase in whole SP content, under stimulation, should decrease astringency and bitterness perception. No correlation was found between the changes in specific families of SP and astringency and bitterness perception.

Aroma profile of a gluten-free barley malt beer crafted to remove gluten using a barley malt extract with high peptidase activity

Gluten-free beer (GFB) was produced from gluten-containing barley malt wort by adding an enzyme-enriched malt extract to the wort, intended for patients with celiac disease. Nevertheless, the aroma profile of such beer is unknown. The results indicated that the treatment reduced 3-methylbutyl acetate, 2-methylbutyl acetate, ethyl hexanoate, 2-methylpropyl acetate, and ethyl butyrate when compared with the reference. Moreover, foam, free amino nitrogen, aging stability, and color deviated significantly in the GFB. Although the values were below the odor threshold, analysis of aging components indicated increased amounts of heating, including 2-furfural and aging indicators, including phenylacetaldehyde. GC-O/MS following a descriptive profile test revealed that the attribute honey significantly increased. Further the shift in aroma composition of the GFB, long-chain free fatty acids (LCFFA) were analyzed, as they have been previously described to negatively correlate with ester metabolism and may be increased because of the technology applied. LCFFA analysis in wort revealed a significant increase in hexadecanoic and linoleic acids caused by the procedure. To clarify the findings, conventional barley malt worts were spiked with hexadecanoic acid, linoleic acid, and a mixture of these acids. A significant decrease in all esters concomitant with a honey-like aroma was observed when linoleic acid was added, but the aging analysis revealed no difference. Through adjustment of ester content to the reference, the spiked beers were less rated honey. The results indicate that aging components are sensed higher in the absence of esters; thus, by reducing LCFFA concentrations of gluten-free wort, the aroma of GFB could be enhanced.

Brewing By-Product Upcycling Potential: Nutritionally Valuable Compounds and Antioxidant Activity Evaluation

The brewing industry produces high quantities of solid and liquid waste, causing disposal issues. Brewing spent grains (BSGs) and brewing spent hop (BSH) are important by-products of the brewing industry and possess a high-value chemical composition. In this study, BSG and BSH, obtained from the production process of two different types of ale beer (Imperial red and Belgian strong beer) were characterized in terms of valuable components, including proteins, carbohydrates, fat, dietary fiber, β-glucans, arabinoxylans, polyphenols, and phenolic acids, and antioxidant activity (Ferric Reducing Antioxidant Power Assay (FRAP), 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-Azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS)). Significant concentrations of total polyphenols were observed in both BSH and BSG samples (average of about 10 mg GAE/g of dry mass); however, about 1.5-fold higher levels were detected in by-products of Belgian strong ale beer compared with Imperial red. Free and bound phenolic acids were quantified using a validated chromatographic method. A much higher level of total phenolic acids (TPA) (about 16-fold higher) was found in BSG samples compared with BSHs. Finally, their antioxidant potential was verified. By-products of Belgian strong ale beer, both BSG and BSH, showed significantly higher antioxidative capacity (about 1.5-fold lower inhibitory concentration (IC50) values) compared with spent grains and hop from the brewing of Imperial red ale. In summary, BSG and BSH may be considered rich sources of protein, carbohydrates, fiber, and antioxidant compounds (polyphenols), and have the potential to be upcycled by transformation into value-added products.

Characterization of lipid profiling in three parts (muscle, head and viscera) of tilapia (Oreochromis niloticus) using lipidomics with UPLC-ESI-Q-TOF-MS

A lipidomic evaluation was performed on the tilapia muscle, head and viscera, including studying the composition, distribution and stereospecific characteristics of fatty acids and lipid species. The head and viscera lipids were significantly richer than the muscle lipids. Triacylglycerols were the predominant fraction (over 80% of total lipid in the muscle and head). Additionally, polyunsaturated fatty acids had higher percentages in phospholipids (30.35-52.05% of total fatty acids) than in triacylglycerols (18.11-25.15%). The C52:2 and C52:3 were the most abundant triacylglycerols, which indicates the potential application in infant food. Moreover, 622, 530 and 513 lipids were identified using ultraperformance liquid chromatography-quadrupole time-of-flight-mass spectrometry in the muscle, head and viscera, respectively. The three tilapia parts were distinguished using multivariate analysis. Five fatty acids and 33 lipid species were considered as the potential biomarkers. This comprehensive analysis will help to evaluate the lipid nutritional values and facilitate exploitation in tilapia consumption and processing.

Functionality of Special Beer Processes and Potential Health Benefits

Consumers’ demand for functional fermented food that can fulfill nutritional needs and help maintain a balanced diet while also having a positive impact on one’s health status is increasing all over the world. Thus, healthy choices could include beverages with nutrients and bioactive compounds which can be used as an effective disease-prevention strategy. Regular beer has certain health benefits which inspire further research with the prospect of obtaining special functional beers with little or no alcohol content. As observed, the special beer market remains highly dynamic and is predicted to expand even further. Therefore, brewers need to keep up with the consumers’ interests and needs while designing special beers, namely nonalcoholic beers (NABs), low-alcohol beers (LABs), and craft beers (CBs). Thus, understanding the potential uses of bioactive compounds in special beer, the wide range of therapeutic effects, and the possible mechanisms of action is essential for developing healthier beverages. This review aimed to evaluate the nutritional features of special beers, and their proven or potential beneficial actions on one’s health status and in preventing certain diseases.

Revealing the constituents of Egypt's oldest beer using infrared and mass spectrometry

Previous studies have shown that the Ancient Egyptians used malted wheat and barley as the main ingredients in beer brewing, but the chemical determination of the exact recipe is still lacking. To investigate the constituents of ancient beer, we conducted a detailed IR and GC-MS based metabolite analyses targeting volatile and non-volatile metabolites on the residues recovered from the interior of vats in what is currently the world’s oldest (c. 3600 BCE) installation for large-scale beer production located at the major pre-pharaonic political center at Hierakonpolis, Egypt. In addition to distinguishing the chemical signatures of various flavoring agents, such as dates, a significant result of our analysis is the finding, for the first time, of phosphoric acid in high level probably used as a preservative much like in modern beverages. This suggests that the early brewers had acquired the knowledge needed to efficiently produce and preserve large quantities of beer. This study provides the most detailed chemical profile of an ancient beer using modern spectrometric techniques and providing evidence for the likely starting materials used in beer brewing.

A review of the analytical methods used for beer ingredient and finished product analysis and quality control

Beer is an incredibly complex beverage containing more than 3000 different compounds, including carbohydrates, proteins, ions, microbes, organic acids, and polyphenols, among others. Beer becomes even more complex during storage, for over time it may undergo chemical changes that negatively affect the flavor, aroma, and appearance. Thus, it can be expected that maintaining the quality of beer throughout its lifetime is a difficult task. Since it is such a popular drink throughout the world, being familiar with proper analytical techniques for beer evaluation is useful for researchers and brewers. These techniques include, but are not limited to, gas chromatography, liquid chromatography, matrix assisted laser desorption/ionization, capillary electrophoresis, mass spectrometry, ultraviolet-visible spectroscopy, and flame ionization detection. This review aims to summarize the various ingredients and components of beer, discuss how they affect the finished product, and present some of the analytical methods used for quality control and understanding the formation of chemicals in beer during the brewing process.

Total, Neutral, and Polar Lipids of Brewing Ingredients, By-Products and Beer: Evaluation of Antithrombotic Activities

The in vitro antithrombotic properties of polar lipid constituents of malted grain (MG), pelleted hops (PH), brewer’s spent grain (BSG), spent hops (SH), wort, and bottled beer from the same production line were assessed in human platelets. The total lipids (TL) were extracted according to the Bligh and Dyer method and further separated into the total neutral lipids (TNL) and total polar lipids (TPL) extracts by counter-current distribution. The TL, TNL, and TPL extracts of all samples were assessed for their ability to inhibit platelet-activating factor (PAF) and thrombin-induced human platelet aggregation. The raw materials, by-products, wort, and beer lipid extracts all exhibited antithrombotic properties against PAF and thrombin. However, the beer TPL exhibited the lowest IC₅₀ values against PAF-induced (7.8 ± 3.9 µg) and thrombin-induced (4.3 ± 3.0 µg) platelet aggregation indicating that these polar lipids were the most antithrombotic. The lipid extracts tended to be more bioactive against the thrombin pathway. The fatty acid content of all the TPL extracts were assessed using GC-MS. The fatty acid composition of the most bioactive TPL extracts, the wort and the beer, shared similar fatty acid profiles. Indeed, it was noted that fermentation seems to play a role in increasing the antithrombotic properties of polar lipids against PAF and thrombin by moderately altering the polar lipid fatty acid composition. Furthermore, the use of brewing by-products as a source of functional cardioprotective lipids warrants further investigation and valorisation.

Evaluation of lipid oxidation mechanisms in beverages and cosmetics via analysis of lipid hydroperoxide isomers

Understanding of lipid oxidation mechanisms (e.g., auto-oxidation and photo-oxidation) in foods and cosmetics is deemed essential to maintain the quality of such products. In this study, the oxidation mechanisms in foods and cosmetics were evaluated through analysis of linoleic acid hydroperoxide (LAOOH) and linoleic acid ethyl ester hydroperoxide (ELAOOH) isomers. Based on our previous method for analysis of LAOOH isomers, in this study, we developed a new HPLC-MS/MS method that enables analysis of ELAOOH isomers. The HPLC-MS/MS methods to analyze LAOOH and ELOOH isomers were applied to food (liquor) and cosmetic (skin cream) samples. As a result, LAOOH and ELAOOH isomers specific to photo-oxidation, and ELAOOH isomers characteristic to auto-oxidation were detected in some marketed liquor samples, suggesting that lipid oxidation of marketed liquor proceeds by both photo- and auto-oxidation during the manufacturing process and/or sales. In contrast, because only LAOOH and ELAOOH isomers specific to auto-oxidation were detected in skin cream stored under dark at different temperatures (-5 °C-40 °C) for different periods (2-15 months), auto-oxidation was considered to be the major oxidation mechanism in such samples. Therefore, our HPLC-MS/MS methods appear to be powerful tools to elucidate lipid oxidation mechanisms in food and cosmetic products.

The chemical profiling of fatty acids during the brewing process

BACKGROUND

Although fatty acids have a beneficial effect on yeast growth during fermentation, their effect on foam and sensory stability of beer is negative. In general, long-chain fatty acids originate from raw materials, whereas short-chain acids are produced by yeast during fermentation. If the concentration of short-chain fatty acids, especially isovaleric and butyric acid, overreaches a sensory threshold, then an unpleasant aroma, such as cheesy or sweaty feet, can be formed in beer.

RESULTS

The distribution of fatty acids, from the preparation of sweet wort to the final beer, was studied using chemometric evaluation. Differences were observed between the decoction and infusion system using four barley varieties. Attention was paid to the behavior of short-chain fatty acids, namely isovaleric acid. The concentration of isovaleric acid in commercial beers brewed in infusion and decoction systems was approximately 1.4 and 1.0 mg L^-1 , respectively. The same trend was observed in experimental samples (1.3 and 0.5 mg L^-1 , respectively). This phenomenon was confirmed experimentally; based on the results, this possibly explains why, during the fermentation, isovaleric acid is coupled with the redox state of yeast cell, which is given by the wort composition (i.e. by the mashing process).

CONCLUSION

The formation of isovaleric acid is not only caused by microbiology infection or by oxidized hops, but also is influenced by the mashing process. © 2018 Society of Chemical Industry.

Analysis of fatty acid profiles of free fatty acids generated in deep-frying process

During the deep fat food frying process, the frying media, oil, continuously degenerates when exposed to high temperature, oxygen and moisture. This leads to physical and chemical changes including the formation of hydrolysis products such as free fatty acids (FFAs) which are associated with undesirable darkening in colour, off-flavouring and a lowering of the smoke point. This study was aiming to develop a method capable of identifying and quantifying individual free fatty acids within oil using a small sample size (100 mg of oil). We used liquid/liquid extraction technique to separate FFAs from the rest of the oil followed by esterification using boron trifluoride (BF3) and then gas chromatography analysis. Various extraction conditions were tested. A mixture of 0.02 M phosphate buffer at pH 12 and acetonitrile at solvent: buffer ratio larger than 2:1 showed the highest efficiency in extraction of FFAs. The method was capable of producing accurate fatty acid profiles of FFAs and showed good precision on medium rancidity oil samples. It also captured the differences induced by adding free fatty acids to samples. An interesting discrepancy was found between the new method and the traditional titration method in terms of overall FFA content, which suggests further optimisation and investigation are required.

Influence of malt source on beer chemistry, flavor, and flavor stability

Beverage quality in the brewing industry is heavily influenced by ingredient properties. The contribution of raw ingredients such as yeast and hops to beer flavor is well understood. However, the influence of barley genotype and/or environment on flavor (the malt 'source') is largely unexplored. Here, a study was performed to determine (i) if there are metabolite differences among six commercial malt sources, (ii) if differences in malt chemistry are reflected in the chemistry of the beer, and (iii) if the differences in the beer chemistry impact sensory attributes of beer, through flavor and flavor stability. Six distinct sources of malts (six varieties from three maltsters) were brewed into six beers using a recipe designed to evaluate differences in flavor. Metabolomics and ionomics was used to characterize chemical variation among the six malts and beers using UHPLC- and HILIC-MS (non-volatile metabolites), HS-SPME/GC-MS (beer volatiles), and ICP-MS (malt metals). These analyses detected a total of 5042 compounds in malt, of which 217 were annotated and included amines, amino acids, fatty acids/lipids/fatty acyls, saccharides/glucosides/sugar acids/sugar alcohols, carboxylic acid derivatives, organic acids, phenolics/benzenoids, purines, pyrimidines/pyridines, terpenes, and organosulfurs. A total of 4568 compounds were detected in beer, of which 246 were annotated and included esters, aldehydes, and alcohols. Statistical analysis revealed chemical variation among the six malts (50/217 malt metabolites varied) and beers (150/246). The six beers were evaluated for flavor using a modified descriptive analysis for 45 sensory traits at 0, 4, and 8 weeks of storage at 4 °C. Principal component analysis of the sensory data revealed flavor differences among the six beers at 8 weeks, and the malt-type Full Pint was described as fruity and Meredith as corn chip. The metabolite and sensory data were integrated and revealed associations between flavor profiles in beer and the annotated malt and beer. The fruity or corn chip flavor profiles in beer were associated beer purines/pyrimidines, volatile ketones, amines, and phenolics, and malt lipids, saccharides, phenols, amines, and alkaloids. Taken together, these data support a role of malt source in beer flavor and flavor stability. As a raw ingredient, malting barley genotypes can be evaluated for a contribution to flavor, and this may be a future target for plant breeding, agronomy, and malting efforts to selectively improve flavor, flavor stability, and quality in beer.

Cocoa pulp in beer production: Applicability and fermentative process performance

This work evaluated the effect of cocoa pulp as a malt adjunct on the parameters of fermentation for beer production on a pilot scale. For this purpose, yeast isolated from the spontaneous fermentation of cachaça (SC52), belonging to the strain bank of the State University of Feira de Santana-Ba (Brazil), and a commercial strain of ale yeast (Safale S-04 Belgium) were used. The beer produced was subjected to acceptance and purchase intention tests for sensorial analysis. At the beginning of fermentation, 30% cocoa pulp (adjunct) was added to the wort at 12°P concentration. The production of beer on a pilot scale was carried out in a bioreactor with a 100-liter capacity, a usable volume of 60 liters, a temperature of 22°C and a fermentation time of 96 hours. The fermentation parameters evaluated were consumption of fermentable sugars and production of ethanol, glycerol and esters. The beer produced using the adjunct and yeast SC52 showed better fermentation performance and better acceptance according to sensorial analysis.