The effects of temperature on the crystalline properties and resistant starch during storage of white bread

Effects of soy protein isolate interaction with brown rice starch on the multiscale structure of brown rice bread

BACKGROUND

Gluten-free bread (GFB) has technical bottlenecks such as hard texture, rough taste and low nutrition in practical production. In order to solve these problems, this study used germinated brown rice starch as the main raw material, and investigated the effects of soybean isolate protein (SPI) on the multiscale structure of germinated brown rice starch and bread quality.

RESULTS

A gluten-free rice bread process simulation system was established, and the interaction between SPI and starch in the simulation system was characterized. The result shows that the interaction forces between SPI and germinated brown rice starch were mainly represented by hydrogen bonds, and with the addition of SPI, the crystallinity of starch showed a downward trend. At the same time, when the amount of SPI was 3%, the appearance quality was the best and the specific volume of bread was 1.08 mL g-1. When the amount of SPI was 6%, the texture quality was the best. Compared with the bread without SPI, the hardness of the bread with 6% SPI was reduced by 0.13 times, the springiness was increased by 0.03 times, the color was the most vibrant, the L* value being 1.02 times the original, and the baking loss was reduced to 0.98 times the original.

CONCLUSIONS

The interaction force between SPI and germinated brown rice starch and its effect on bread quality were clarified, and these results inform choices about providing a theoretical basis for the subsequent development of higher-quality GFB. © 2024 Society of Chemical Industry.

The Physicochemical and Rheological Properties of Green Banana Flour-Wheat Flour Bread Substitutions

Functional foods are currently receiving increasing popularity in diet modification. Green bananas contain far more dietary fiber (DF) and resistant starch (RS) than mature bananas. The potential for integrating these vital components into food, such as bread, has expanded. Thus, this study aimed to examine the physicochemical and rheological behavior of wheat flour dough after the addition of varying amounts of Australian, green banana flour (GBF) substitutions (5, 10, 15, 25, and 30%). Using MixoLab 2, we recorded the rheological parameters of the dough that had GBF substitutions. Additionally, the flour color ('L*', 'a*', and 'b*' value) and crumb cell structure analysis were evaluated. Although increasing the amount of GBF replacement generally improved dough quality with all banana cultivars, GBF from Cavendish and Ladyfinger showed a greater improvement than Ducasse. Improved dough mixing stability and increased viscosity, starch gelatinization, and retrogradation were all predicted to contribute to longer bread shelf life. RS content of the enriched bread increased significantly with both Ladyfinger and Ducasse (2.6%), while Ladyfinger bread had the highest DF (9.1%). With increasing GBF, L*, a*, and b* values were changed considerably with a strong linear correlation. A MATLAB analysis indicated substantial variations across samples regarding the small, medium, and total air space counts based on 10% banana flour as a standard level of addition. In conclusion, the processing properties and nutritional value of wheat flour can be enhanced by replacing specific proportions of wheat flour with green banana flour without major detrimental effects on dough processing attributes and thus highlight the possibility of utilizing GBF from different banana varieties for use in fine-tuning composite flour developments.

A multihole nozzle controls recrystallization of high-moisture extruded maize starches: Effect of cooling die temperature

Hot extrusion is utilized for starch modification due to its high mechanical input and product output. Amylose recrystallization commences and primarily depends on intermolecular interactions after conventional extrusion. Hence, the design of a new component based on the existed extrusion system was aimed at facilitating molecular aggregation, potentially accelerating starch recrystallization. In this study, a nozzle sheet comprising 89 holes was integrated into the cooling die. The impact of the multihole nozzle on the structure and in vitro digestibility of extruded maize starches after retrogradation was examined at varying cooling die temperatures. The results showed that the nozzle-assembled extrusion system operated effectively without additional mechanical or yield losses. At 50 °C, the crystallinity of nozzle-produced starch was approximately 70 % higher than that of conventionally extruded starch, predominantly owing to the B-type allomorph of the amylose double helix. Recrystallized amylopectin was also found in these nozzle-produced starches, indicating that multihole nozzle-induced uniaxial elongational flow resulted in the rapid starch crystallization. The increased formation of recrystallized amylose led to improved molecular order in starch structures while reducing their digestibility. These findings revealed a new approach to improve starch crystallinity by incorporating a nozzle sheet in the extrusion process.

Harnessing the power of resistant starch: a narrative review of its health impact and processing challenges

Starch is a primary energy storage for plants, making it an essential component of many plant-based foods consumed today. Resistant starch (RS) refers to those starch fractions that escape digestion in the small intestine and reach the colon where they are fermented by the microflora. RS has been repeatedly reported as having benefits on health, but ensuring that its content remains in food processing may be challenging. The present work focuses on the impact RS on health and explores the different processes that may influence its presence in foods, thus potentially interfering with these effects. Clinical evidence published from 2010 to 2023 and studying the effect of RS on health parameters in adult populations, were identified, using PUBMED/Medline and Cochrane databases. The search focused as well on observational studies related to the effect of food processes on RS content. While processes such as milling, fermentation, cooking and heating seem to have a deleterious influence on RS content, other processes, such as cooling, cooking time, storage time, or water content, may positively impact its presence. Regarding the influence on health parameters, there is a body of evidence suggesting an overall significant beneficial effect of RS, especially type 1 and 2, on several health parameters such as glycemic response, insulin resistance index, bowel function or inflammatory markers. Effects are more substantiated in individuals suffering from metabolic diseases. The effects of RS may however be exerted differently depending on the type. A better understanding of the influence of food processes on RS can guide the development of dietary intake recommendations and contribute to the development of food products rich in RS.

Effects of oil and heating on the physicochemical and microstructural properties of gluten-starch dough

Oil has crucial applications for improving the quality of some wheat products during dough formation and heat-processing. Herein, the influence of oil modification and thermal-mechanical treatment on dough prepared mainly with wheat starch and gluten was investigated. Oils with different structures addition reduced the hardness but improved the tensile strength of dough and inhibited starch retrogradation. Oil also reduced the disulfide bond, hydrogen bond and hydrophobic interactions whilst changed the rheology of dough. The X-ray diffraction patterns were characterised by new weak peaks at approximately 12.9°, and 19.8°, indicating that thermal-mechanical treatment promoted the formation of V-type complexes. Oil modification impaired dough short-range ordered structure, but prevented part starch granule crystallinity degradation caused by thermal-mechanical treatment. Scanning electron microscopy revealed oil modification and thermal-mechanical treatment synergistically affected starch-gluten agglomeration. Our findings contributed to elucidate the influence of oil modification and thermal-mechanical treatment on dough functionality.

Quality and staling characteristics of white bread fortified with lysozyme-hydrolyzed mealworm powder (Tenebrio molitor L.)

Edible insects have a low environmental impact but are rich in nutrients and have been promoted as alternative protein sources. However, adding insect flour to bread negatively affects the overall quality, especially loaf volume and textural properties. Furthermore, relevant studies on chitin are limited. Therefore, this study examined chitin hydrolysis using lysozymes to enhance the quality characteristics in defatted mealworm (Tenebrio molitor L.) powder (DF-M)-supplemented bread. The chitin hydrolysis degree by lysozymes was evaluated using the 3,5-dinitrosalicylic acid assay and matrix-assisted laser desorption ionization-time-of-flight mass spectrometry. The amount of chitin oligomers increased with time, and no significant difference in the hydrolysis efficiency between water and 400 mM acetate buffer was observed. Enzymatic hydrolysis improved the DF-M water- and oil-binding and antioxidant capacities. In addition, chitin hydrolysis increased the volume and softened the texture of white bread. In particular, bread supplemented with DF-M hydrolyzed for 4 h at 10 % had the highest moisture content among the mealworm-added bread groups during storage for 5 days. Moreover, sensory evaluation showed a positive effect of chitin hydrolysis on acceptability. Our findings indicate that chitin hydrolysis can improve the quality of bread containing insect additives. In conclusion, this study provides novel insights into producing high-quality and functional bakery products from edible insects by the enzymatic hydrolysis of edible insect powders and could expand the applications of edible insects as food ingredients.

Preparation and Physico-Chemical Characterization of OSA-Modified Starches from Different Botanical Origins and Study on the Properties of Pickering Emulsions Stabilized by These Starches

Native starch (NS) from different botanical origins (native rice/tapioca/oat starch, NRS/NTS/NOS) were hydrophobically modified by octenyl succinic anhydride (OSA), and the octenyl succinic (OS) groups were successfully introduced in the starch molecules which obtained OS-starch (OSRS, OSTS and OSOS) with different levels of modification (0.5%, 1.0%, 1.5%, 2.0%, 2.5%, 3.0%) and degree of substitution (DS). The structural properties of the OS-starch, such as granule size, crystal, wettability and morphology were studied, and the OS-starch was used as particulate stabilizers to produce oil-in-water (O/W) Pickering emulsions. The emulsion index, droplet size distribution and microstructures of Pickering emulsions produced by different OS-starches were compared. OSA modification had almost no effect on the morphology or crystal structure types of three kinds of NS and OS-starch but markedly increased the contact angle and particle size distribution of OSRS, OSTS and OSOS. Esterification reaction of OSA and starch mainly occurred in amorphous regions of starch, and the OSA significantly improved the emulsifying capacity of OSRS, OSTS and OSOS granules and thus stabilized emulsions formed at higher levels (2.5% and 3.0%) of modification of OS-Starch exhibited better stability; the ability of OS-starch to stabilize Pickering emulsion was 3.0% OSRS > 3.0% OSOS > 3.0% OSTS, respectively. Observation and structural properties analysis of OS-starch granules and Pickering emulsion droplets showed that the number and thickness of the starch granules on the oil-water interface of the emulsion droplets increased with improvement of the OSA modification level, and an aggregation state was formed between the OS-starch granules, which was also enhanced with the OSA modification levels. These were all necessary for the Pickering emulsion stabilized by starch granules to remain in a steady state.

Effect of mulberry leaf polysaccharides on the baking and staling properties of frozen dough bread

BACKGROUND

Deterioration in frozen dough bread easily occurs in store, resulting in tremendous economic waste. Therefore, it is imperative to find natural additives to improve storage staling. The effects of mulberry leaf polysaccharides (MLP) were studied in terms of baking, retrogradation and microstructural aspects in frozen dough bread.

RESULTS

The incorporation of MLP improved the specific volume and reduced the hardness of bread during room storage, with 1% MLP showing the best results. The results of X-ray diffraction and Fourier transform infrared spectroscopy showed that crystallinity was decreased and the formation of double helical structure was inhibited with the incorporation of MLP. Meanwhile, the results of low-field nuclear magnetic resonance demonstrated that the addition of MLP was advantageous for retarding water migration and distribution, with reduced water loss. It can be seen intuitively from scanning electron microscopy that MLP improved the gluten network with a smoother and flatter system.

CONCLUSION

MLP improved the quality of bread during storage and delayed the degradation of internal structure, and can be used as an effective natural additive to improve the storage stability of baked food. 1% MLP showed the best results. © 2022 Society of Chemical Industry.

The impact of gliadin and glutenin on the formation and structure of starch-lipid complexes

This study evaluated the influence of the main gluten fractions (gliadin and glutenin) on the physicochemical properties of binary wheat starch-Lauric acid (WS-LA) complexes during heat processing to explore the complex structure and digestion of WS-LA in the presence of gluten. Ternary WS-LA-glutenin complexes were prepared at different pH (5.2 and 7), whereas WS-LA-gliadin was prepared using ethanol, and their physicochemical properties were analyzed. We found that the addition of glutenin displayed a sharper and higher diffraction peak than samples without protein, which increased short-range order structure (low full width at half-maximum (FWHM) of the band at 480 cm^-1) and good thermal stability (melting peak appeared at a higher temperature); the opposite was shown for gliadin. Even though glutenin increased the resistant starch (RS) content than WS-LA, all samples prepared in 65% ethanol showed higher RS content than WS-LA-glutenin samples. These findings might improve our understanding of the relationship between gliadin/glutenin and binary complexes and provide a theoretical basis for preparing starch-based foods with a low glycemic index.

Methods for characterizing the structure of starch in relation to its applications: a comprehensive review

Starch is a major part of the human diet and an important material for industrial utilization. The structure of starch granules is the subject of intensive research because it determines functionality, and hence suitability for specific applications. Starch granules are made up of a hierarchy of complex structural elements, from lamellae and amorphous regions to blocklets, growth rings and granules, which increase in scale from nanometers to microns. The complexity of these native structures changes with the processing of starch-rich ingredients into foods and other products. This review aims to provide a comprehensive review of analytical methods developed to characterize structure of starch granules, and their applications in analyzing the changes in starch structure as a result of processing, with particular consideration of the poorly understood short-range ordered structures in amorphous regions of granules.

Effect of Wholegrain Flour Particle Size in Bread on Glycaemic and Insulinaemic Response among People with Risk Factors for Type 2 Diabetes: A Randomised Crossover Trial

Wholegrain flour produced by roller-milling is predominantly comprised of fine particles, while stoneground flour tends to have a comparatively smaller proportion of fine particles. Differences in flour particle size distribution can affect postprandial glycaemia in people with type 2 diabetes and postprandial insulinaemia in people with and without type 2 diabetes. No prior studies have investigated the effect of wholegrain flour particle size distribution on glycaemic or insulinaemic response among people with impaired glucose tolerance or risk factors for type 2 diabetes. In a randomised crossover study, we tested the 180-min acute glycaemic and insulinaemic responses to three wholegrain breads differing in flour particle size and milling method: (1) fine roller-milled flour, (2) fine stoneground flour, and (3) coarse stoneground flour. Participants (n = 23) were males and females with risk factors for type 2 diabetes (age 55-75 y, BMI >28 kg/m², completing less than 150 min moderate to vigorous intensity activity per week). Each test meal provided 50 g available carbohydrate, and test foods were matched for energy and macronutrients. There was no significant difference in blood glucose iAUC (incremental area under the curve) between the coarse stoneground flour bread and the fine stoneground flour bread (mean difference -20.8 (95% CI: -51.5, 10.0) mmol·min/L) and between the coarse stoneground flour bread and the fine roller-milled flour bread (mean difference -23.3 (95% CI: -57.6, 11.0) mmol·min/L). The mean difference in insulin iAUC for fine stoneground flour bread compared with the fine roller-milled flour bread was -6.9% (95% CI: -20.5%, 9.2%) and compared with the coarse stoneground flour bread was 9.9% (95% CI: -2.6%, 23.9%). There was no evidence of an effect of flour particle size on postprandial glycaemia and insulinaemia among older people with risk factors for type 2 diabetes, most of whom were normoglycaemic.

Preparation and characterization of corn flours with variable starch digestion

Several grains such as wheat, rice, corn, oat, barley and rye are cultivated throughout the world. They are converted to variety of food products using a multitude of processing technologies to quench the growing organoleptic demands and consumers' preferences. Among them, corn, ranking third in wide consumption, is cost-effective and has long-term storability. Herein, ready-to-eat corn flours with variable starch digestion have been developed by processing at high temperature with shear using a twin screw continuous processor. The influence of processing temperature (121, 145 and 160°C) and moisture (25, 30 and 35%) has been studied. Results suggest both processing temperature and moisture modulate the rapidly digestible starch (RDS), slowly digestible starch (SDS) and resistant starch (RS) amounts of the flours. The presence or absence of oil in the flour further controls the starch digestion. The outcome is deemed to be helpful to design and develop healthy and palatable functional food products in addition to furthering the current market share for corn and other grains.

Ordered structural changes of retrograded starch gel over long-term storage in wet starch noodles

Temperature-induced structural variations of retrograded starch gel during long-term storage were investigated in a real food system (wet starch noodles). Fresh starch noodles presented a B-type XRD pattern containing 8.82% crystallinity and 16.04% double helices. In the first 2 weeks, double helices of starch chain formed long-range ordered structure leading to increased crystallinity, and such structural transformation was positively correlated with increasing storage temperature (from 4 °C to 35 °C) and storage time. However, with the extension of storage time to 12 weeks, the disorganization of supra-molecular structure was likely to be observed by decreased crystallinity, double helix and water mobility. Besides, we propose that the area and intensity of Raman band at 2910 cm^-1 can be a good indicator for evaluating perfection of crystallinity in starch noodles. These results contributed to a better understanding of mechanisms underlying molecular order changes of retrograded starch gel product during long-term storage.

Effect of moist and dry-heat treatment processes on the structure, physicochemical properties, and in vitro digestibility of wheat starch-lauric acid complexes

Herein, we investigated the impact of moist (steaming and boiling) and dry (baking and microwaving)-heat treatment processes on the structure and physicochemical properties of wheat starch (WS) supplemented with lauric acid (LA). Elemental composition analysis revealed the interplay between WS and LA. Scanning electron microscopy (SEM) and iodine staining revealed that lamellar crystalline structure of WS-LA complexes was improved after moist-heat treatment (relative to samples without any heat treatments); the finding which is at variance to dry-heat treatment process. Additionally, high resistance to thermal decomposition and a lower 1022/995 cm^-1 absorbance ratio were observed in moist-heat treated WS-LA compared with dry-heat samples. Moreover, the V-type diffraction peak intensity and resistance to in vitro enzymatic hydrolysis of samples treated with moist-heat were increased to a greater extent than the dry-heat treated counterparts. In sum, this study would facilitate the application of functional starch-lipid complexes in food necessitated heat treatments.

Influence of the fermentation methods on the resistant starch formation by X-ray diffraction

This work consists of a study about the influence of the fermentation methods on the resistant starch (RS) formation. Crystalline phases at the white bread after production and during the staling were evaluated. The bakery formulation was proportionally the same for the two fermentation methods used, except for the yeast. A commercial dry yeast and sourdough were used for the direct method (DM) and indirect method (IM), respectively. The temperature and cooking time, as well as the packaging and storage, were kept constant for all samples. Characterizations were performed on both samples by XRD and FTIR-ATR. It is possible to affirm that the fermentation method greatly influences the crystalline and microstructural properties of bread, mainly on the RS. The bread produced by IM presented more significant changes in its microstructure and degree of crystallinity than bread made by DM. These microstructural differences may be directly related to the microorganisms present in the sourdough, which can influence the bread resistant starch during the cooking and storage time.

Storage temperature and time affect the enzyme resistance starch and glycemic response of cooked noodles

White-salted noodles are prepared, stored and consumed in various ways. However, relationships among cooking and storage conditions on nutritional functionality are not fully understood. The manuscript elucidates the mechanism of formation of resistant starch (RS) leading to slower digestion rate of variously cooked (boiled, steamed, stir-fried, fried and microwave heated) noodles followed by storage under different conditions (-18, 4 and 25 °C for 4, 24 and 48 h). RS content of noodles stored at 25 °C was higher than noodles stored at 4 °C, which was consistent with increases in the degree of crystallinity during storage. We showed that the residual moisture content primarily facilitated the mobility of starch chains and contributed towards the increase in RS associated with the decrease of enzyme susceptivity of noodles after storage. Evidence that supramolecular organization (helical structure and crystallinity) had a more pronounced effect than the macroscopic structure such as compactness or bulk density was also provided.

The formation and in vitro enzymatic digestibility of starch-lipid complexes in steamed bread free from and supplemented with different fatty acids: Effect on textural and retrogradation properties during storage

Herein, the formation of starch-lipid complexes in steamed bread (SBr) free from and supplemented with fatty acids of varying chain lengths, including lauric acid (LA), glycerol monolaurate (GML), stearic acid (SA), and glycerol monostearate (GMS) and their effects on in vitro enzymatic digestibility were investigated. The enthalpy value of SBr samples (1.86-3.46 J/g) was significantly decreased (P < 0.05) compared to wheat starch samples (5.64-7.17 J/g) fortified with fatty acids. The relative crystallinity (16.5%-32.8%) of SBr corresponds to the content of starch-lipid complexes. SBr supplemented with fatty acids exhibited softer texture than lipid-free SBr stored at 4 °C for 0, 1, 4, and 7 days. Higher enzyme resistance was observed in SBr samples supplemented with fatty acids and the content of resistant starch (RS) was increased from 7.54% to 23.13% in SBr supplemented with LA. As demonstrated by microscopic computed tomography (mCT), the crystalline structure of SBr samples supplemented with LA and GML have a higher density than SBr fortified with SA and GMS; the findings which are in line with thermal properties and X-ray diffraction analysis. In sum, the formation of starch-lipid complexes could be considered as a new way to improve the SBr textural features during storage.

Effect of potato flour on quality and staling properties of wheat-potato flour bread

To elucidate the impact of potato flour (PF) on quality changes and staling characteristics of the composite bread from wheat-potato flour (WPF), the physicochemical (specific volume, colority, sensory value, texture, and viscosity) properties, and staling (X-ray diffraction and water migration) properties of bread were investigated. The quality of composite bread was comparable to wheat bread when addition level of PF at 20%, but decreased when the addition level increased to 30% or more, and became unacceptable at 50%. A chewy mouthfeel and an elastic and none-crumbly texture were observed on composite bread, which had higher hardness than wheat bread, and could keep on both longer linear distance and higher linear force during compression test. It indicated that such new parameters other than hardness should be introduced to coordinate with the texture quality of composite bread. During storage, the higher addition level of PF significantly decreased crystallinity of composite bread and slowed water migration rate from the crumb to crust, suggesting that PF had antistaling effect on composite bread, which was further emphasized by the fact that the setback value of the WPF decreased with the increase of PF addition.

Physicochemical Properties and Resistant Starch Content of Corn Tortilla Flours Refrigerated at Different Storage Times

The tortilla is a foodstuff that has a short shelf-life, causing great losses to the industry. The objective of this work was to evaluate, for the first time, the physicochemical properties and resistant starch (RS) content of flours. These were obtained from nixtamalized corn tortillas made with traditional and industrial (commercial) methods, stored at 4 °C for 7, 15, and 30 days. The flours were characterized by measuring particle size distribution, color, water absorption index (WAI), water solubility index (WSI), viscosity, calcium, and RS content. Additionally, chemical proximate analysis, scanning electron microscopy (SEM), and thermal analysis were conducted. Storage at 4 °C increased the friability of tortillas and shifted the particle size distribution toward a greater content of coarse particles in corn tortilla flours. The commercial corn tortilla flours showed higher WAI and WSI values than the traditional corn tortilla flours. On the other hand, the traditional corn tortilla flours exhibited higher RS content values than commercial corn tortilla flours as well as peak viscosity. X-ray diffractograms revealed the presence of amylose-lipid complexes (RS5) in experimental samples. The thermograms evidenced three endotherms corresponding to corn starch gelatinization and melting of type I and type II amylose-lipid complexes.

Structural Basis of Resistant Starch (RS) in Bread: Natural and Commercial Alternatives

Bread is categorized as having a high amount of rapidly digested starch that may result in a rapid increase in postprandial blood glucose and, therefore, poor health outcomes. This is mostly the result of the complete gelatinization that starch undergoes during baking. The inclusion of resistant starch (RS) ingredients in bread formulas is gaining prominence, especially with the current positive health outcomes attributed to RS and the apparition of novel RS ingredients in the market. However, many RS ingredients contain RS structures that do not resist baking and, therefore, are not suitable to result in a meaningful RS increase in the final product. In this review, the structural factors for the resistance to digestion and hydrothermal processing of RS ingredients are reviewed, and the definition of each RS subtype is expanded to account for novel non-digestible structures recently reported. Moreover, the current in vitro digestion methods used to measure RS content are critically discussed with a view of highlighting the importance of having a harmonized method to determine the optimum RS type and inclusion levels for bread-making.

Batter Rheology and Quality of Sponge Cake Enriched with High Percentage of Resistant Starch (Hi-maize)

Addition of resistant starch (RS) to foods improves their health benefits. However, quality and sensory properties of the products are scarified when high amounts of RS (>20%) are added. The main purpose of this study was to develop an acceptable cake containing high level of RS (>20%) and to fix the associated problems by addition of gluten powder. Wheat flour was replaced with 30%, 40% and 50 % of reconstituted flour; a mixture of RS and gluten powder (9:1, w/w) and some quality aspects of the batter and cakes were studied. With increasing the RS+gluten levels, pasting temperature increased while peak and final viscosities decreased. Batter density, viscosity, storage and loss moduli reduced whereas the size of air bubbles increased. Cake volume, height, porosity and hardness reduced, while the crust lightness and crumb darkness increased. Based on the sensory analysis a maximum of 40% RS+Gluten resulted in an acceptable cake quality.

Dynamic high-pressure microfluidization assisting octenyl succinic anhydride modification of rice starch

Octenyl succinic anhydride (OSA) modified starch is widely used in food industries. In this study, rice starch (RS) was pretreated by dynamic high-pressure microfluidization (DHPM) and subsequently modified by OSA. The influence of DHPM on OSA modification of rice starch was investigated. Results showed that DHPM pretreatment enhanced the degree of substitution by changing the morphology and crystallinity of rice starch. Compared with the rice starch modified by OSA without DHPM pretreatment (OSA-RS), the DHPM-pretreated OSA starch (DHPM-OSA-RS) presented higher peak viscosity and lower pasting temperature. DHPM-OSA-RS also exhibited better emulsifying activity and emulsion stability. This study suggested that DHPM will provide an opportunity to change the physicochemical properties of starch, with the resulting starch being more suitable for chemical modification.