Effect of substituted gelling agents from pomegranate peel on colour, textural and sensory properties of pomegranate jam

Implementation of Plum Skin as a Structuring Agent in Plum Spread

Plum skin, a by-product of industrial plum juice production, is rich in phenolic bioactives, functional compounds, and dietary fibers. These compounds support health, while the fibers may also act as structuring agents in food processing. This study investigated the structuring properties of lyophilized plum skin (LPS) in functional plum spreads produced in laboratory (F-LS) and semi-industrial (F-IS) environments, compared to a control spread (CS). Textural and rheological properties were analyzed through penetration, spreadability, flow, and dynamic oscillatory tests. Total, soluble, and insoluble dietary fibers (TDF, SDF, and IDF) in LPS and plum purée (PP) were measured using the enzymatic gravimetric method, and pectic substances contents were quantified using the colorimetric carbazole method. Fourier transform infrared spectroscopy confirmed the presence of polysaccharides and pectins in LPS. LPS had higher TDF, SDF, and IDF compared to PP, with TDF in LPS at 38.98 ± 0.52 g/100 g d.m. and IDF as the predominant fraction. The pectin content in LPS was 0.73 ± 0.03 g/100 g d.m., and water retention capacity ranged from 3.63 to 3.86 g/g depending on temperature (room, 50, and 82 °C). Incorporating LPS into the F-IS spread significantly increased all textural and rheological parameters, with TDF three times higher (6.69 g/100 g) compared to CS. All samples exhibited viscoelastic gel-like behavior, and LPS was a statistically significant structuring agent in both functional spreads compared to CS.

Effect of Carrot Callus Cells on the Mechanical, Rheological, and Sensory Properties of Hydrogels Based on Xanthan and Konjac Gums

The study aims to develop a plant-based food gel with a unique texture using callus cells and a mixture of xanthan (X) and konjac (K) gums. The effect of encapsulation of carrot callus cells (0.1 and 0.2 g/mL) on properties of X-K hydrogels was studied using the mechanical and rheological analysis with a one-way ANOVA and Student's t-test used for statistical analysis. Hedonic evaluation and textural features were obtained from 35 volunteers using a nine-point hedonic scale and a 100 mm visual analog scale with the Friedman's test and the Durbin post hoc test used for statistical analysis. Mechanical hardness, gumminess, and elasticity increased by 1.1-1.3 and 1.1-1.8 times as a result of encapsulation 0.1 and 0.2 g/mL cells, respectively. The addition of cells to the hydrogels resulted in an increase in the complex viscosity, strength, and number of linkages in the gel. The hydrogel samples received identical ratings for overall and consistency liking, as well as taste, aroma, and texture features. However, the callus cell-containing hydrogel had a graininess score that was 82% higher than the callus cell-free hydrogel. The obtained hydrogels based on gums and immobilized carrot callus cells with unique textures may be useful for the development of diverse food textures and the production of innovative functional foods.

Factors Influencing Elderly Consumers' Preferences for Edible Gels: Insights from Slovakia

As dietary needs shift with the growing and aging population, there is a demand for food products that meet nutritional, safety, and tribological requirements while being cost-effective. Seniors must be given significant consideration in new product development. This study examines consumer preferences for arabinogalactan (AG) and beta-glucan (BG) hydrogels with vanilla and coffee-biscuit flavors, using consumer tests (N = 80) and an online survey (N = 852). It focuses on the gels' physical properties, such as texture and viscosity, and their impact on sensory perception. The use of two different gel-forming polysaccharides, each with a unique sensory profile, was observed to affect the sensory properties of the resulting gels and subsequently influence product acceptance. This study analyzed preferences across three age groups: young (18-39 years), middle-aged (40-59 years), and older adults (60+ years). The results showed that seniors preferred AG-based gels. Significant attributes such as the intensity of flavor and bitter taste influenced the overall liking of the gels. Texture also notably impacted preferences. The survey findings revealed statistically significant (p < 0.05) differences in preferences between older adults and younger age groups. Tailoring product development and marketing strategies based on age and sensory preferences could enhance consumer acceptance of edible gels.

Food Additives and Evolved Methods of Detection: A Review

Food additives are essential constituents of food products in the modern world. The necessity of food processing went up rapidly as to meet requirements including, imparting desirable properties like preservation, enhancement and regulation of color and taste. The methods of identification and analysis of such substances are crucial. With the advancement of technology, a variety of techniques are emerging for this purpose which have many advantages over the existing conventional ways. This review is on different kinds of additives used in the food industry and few prominent methods for their determination ranging from conventional chromatographic techniques to the recently evolved nano-sensor techniques.

A Novel Strategy for Mixed Jam Evaluation: Apparent Indicator, Sensory, Metabolomic, and GC-IMS Analysis

Jam is a popular traditional and modern food product for daily consumption. However, the benefits of mixed jams over single-fruit jams have not been thoroughly explored, with analyses limited to superficial indices. In this study, Xinjiang special Morus nigra L. and Prunus domestica L. were used as raw materials to prepare single-fruit and mixed jams, and their differences in antioxidants, organoleptic qualities, pH, texture, and color were analyzed. The dynamics of metabolites before and after thermal processing were assessed using untargeted metabolomics. The results indicate that the main metabolites were flavonoids, terpenoids, amino acids, phenolic acids, and carbohydrates. Flavonoid metabolites changed significantly after thermal processing, with 40 up-regulated and 13 down-regulated. During storage, polyphenols were the prominent differential metabolites, with fifty-four down-regulated and one up-regulated. Volatile aroma components were analyzed using gas chromatography-ion mobility spectrometry (GC-IMS); the aroma components E-2-hexenal, E-2-pentenal, 3-methylbutanal, 1-penten-3-ol, tetrahydro-linalool, 1-penten-3-one, hexyl propionate, isoamyl acetate, α-pinene, and propionic acid in mixed jam were significantly higher than in single-fruit jam. In this study, untargeted metabolomics and GC-IMS were used to provide a more comprehensive and in-depth evaluation system for jam analysis.

Effect of microwave-vacuum drying on the physicochemical properties of a functional tomato snack bar

BACKGROUND

Tomato is an indispensable ingredient of the Mediterranean diet. Reformulation of traditional Mediterranean products to increase the adherence of consumers is becoming popular. In this study, a tomato snack bar enriched with olive powder and pea protein was developed by using microwave-vacuum drying. Formulations also included tomato powder (TP) and low-methoxylated pectin (LMP) as a structuring agent.

RESULTS

The moisture content of microwave-vacuum-dried samples varied in the range 13.6-19.8% and water activity (aw ) values were ~0.6. LMP and TP concentrations affected the color of microwave-vacuum-dried samples. However, the color mainly changed in conventionally dried samples due to browning. In microwave-vacuum-dried samples, lycopene content decreased with increasing LMP, but increased with increasing TP. Textural properties of microwave-vacuum-dried snack bars increased with increasing LMP and TP.

CONCLUSION

Both texture and Fourier transform infrared spectroscopy results indicated that there was a network formation due to the contribution of protein and pectin; however, the type of interaction was highly dependent on the drying mechanism. Nuclear magnetic resonance relaxometry data showed that microwave-vacuum-dried samples had a more uniform water distribution. Besides its time and energy efficiency, microwave-vacuum drying improved the color and textural properties of tomato snack bars compared to conventionally dried ones. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Effect of Hogweed Pectin on Rheological, Mechanical, and Sensory Properties of Apple Pectin Hydrogel

This study aims to develop hydrogels from apple pectin (AP) and hogweed pectin (HP) in multiple ratios (4:0; 3:1; 2:2; 1:3; and 0:4) using ionotropic gelling with calcium gluconate. Rheological and textural analyses, electromyography, a sensory analysis, and the digestibility of the hydrogels were determined. Increasing the HP content in the mixed hydrogel increased its strength. The Young’s modulus and tangent after flow point values were higher for mixed hydrogels than for pure AP and HP hydrogels, suggesting a synergistic effect. The HP hydrogel increased the chewing duration, number of chews, and masticatory muscle activity. Pectin hydrogels received the same likeness scores and differed only in regard to perceived hardness and brittleness. The galacturonic acid was found predominantly in the incubation medium after the digestion of the pure AP hydrogel in simulated intestinal (SIF) and colonic (SCF) fluids. Galacturonic acid was slightly released from HP-containing hydrogels during chewing and treatment with simulated gastric fluid (SGF) and SIF, as well as in significant amounts during SCF treatment. Thus, new food hydrogels with new rheological, textural, and sensory properties can be obtained from a mixture of two low-methyl-esterified pectins (LMPs) with different structures.

Heteropolysaccharides in sustainable corrosion inhibition: 4E (Energy, Economy, Ecology, and Effectivity) dimensions

Carbohydrate polymers (polysaccharides) and their derivatives are widely utilized in sustainable corrosion inhibition (SCI) because of their various fascinating properties including multiple adsorption sites, high solubility and high efficiency. Contrary to traditional synthetic polymer-based corrosion inhibitors, polysaccharides are related to the 4E dimension, which stands for Energy, Economy, Ecology, and Effectivity. Furthermore, they are relatively more environmentally benign, biodegradable, and non-bioaccumulative. The current review describes the SCI features of various heteropolysaccharides, including gum Arabic (GA), glycosaminoglycans (chondroitin-4-sulfate (CS), hyaluronic acid (HA), heparin, etc.), pectin, alginates, and agar for the first time. They demonstrate impressive anticorrosive activity for different metals and alloys in a variety of corrosive electrolytes. Through their adsorption at the metal/electrolyte interface, heteropolysaccharides function by producing a corrosion-protective film. In general, their adsorption follows the Langmuir isotherm model. In their molecular structures, heteropolysaccharides contain several polar functional groups like -OH, -NH₂, -COCH₃, -CH₂OH, cyclic and bridging O, -CH₂SO₃H, -SO₃OH, -COOH, -NHCOCH₃, -OHOR, etc. that serve as adsorption centers when they bind to metallic surfaces.

Physicochemical Characteristics of Soluble Dietary Fiber Obtained from Grapefruit Peel Insoluble Dietary Fiber and Its Effects on Blueberry Jam

Appropriate modification methods can increase the proportion of soluble dietary fiber (SDF). In this study, grapefruit peel insoluble dietary fiber (GP-IDF) was modified with the combined microwave and enzymatic method to obtain SDF. With regard to structural characterization, SDF from grapefruit peel IDF (GP-IDF-SDF) presented as a flat sheet with cracks, composed of a typical cellulose type I crystal, and had good stability below 200 °C. Galacturonic acid, arabinose and glucuronic acid were the main monosaccharide compositions, indicating that pectin might have been the principal component. Moreover, GP-IDF-SDF was excellent in water retention capacity (13.43 ± 1.19 g/g), oil retention capacity (22.10 ± 0.85 g/g) and glucose adsorption capacity (14.49 ± 0.068 mg/g). Thereafter, the effects of GP-IDF-SDF and commercial pectin addition on the color, rheology, texture and sensory properties of blueberry jam were compared. The results showed that the color of jam with GP-IDF-SDF was lighter. The addition of GP-IDF-SDF had less effects on the viscosity and gel strength of jam, but it enhanced the stability of jam. According to sensory data, the color, texture and spreadability of jam with GP-IDF-SDF or pectin were improved and more acceptable. Overall, GP-IDF-SDF had functional characteristics and played a positive role in jam, and it is expected to be a candidate for the development of functional food ingredients.

Effect of Inclusion of Date Press Cake on Texture, Color, Sensory, Microstructure, and Functional Properties of Date Jam

Date press cake (DPC) is a by-product of the date syrup industry with a high content of dietary fibers, minerals, and antioxidant compounds. Accordingly, the present study aimed to evaluate the inclusion of DPC on the color parameters, texture profile, sensory evaluation, microstructure properties, total phenolics, and antioxidant capacity of date jam. The DPC was included in the preparation of date jam in an increasing level of 0, 3, 6, 9, and 12% (w/w). The results revealed that increasing DPC levels significantly increased the hardness, cohesiveness, adhesiveness, and chewiness properties of date jam. The increase in DPC inclusion levels significantly decreased the L* values and increased the a*, b*, and ΔE values of the jam. The DPC addition significantly increased the phenolics content and antioxidant capacity in a dose-dependent manner and the highest value reported in the jam contained 12% DPC by 40.02 and 11.50% compared to the control, respectively. The scanning electron microscopy results revealed that the addition of DPC up to 9% resulted in a jam surface with a denser network, homogeneous structure, and without cracks and pores, indicating improvement in the morphological properties. The sensory evaluation results showed that date jam prepared with 9% DPC had the highest overall acceptability score. This study revealed the potential use of DPC in date jam formulation up to 9% as a natural, functional, and low-cost ingredient to improve the jam’s textural properties, antioxidant capacity, and overall acceptability.

Enrichment of Agar Gel with Antioxidant Pectin from Fireweed: Mechanical and Rheological Properties, Simulated Digestibility, and Oral Processing

The aims of the study were to evaluate the influence of pectin isolated from fireweed (FP) on the mechanical and rheological properties of agar (A) gel, to investigate the release of phenolic compounds (PCs) and pectin from A-FP gels at simulated digestion in vitro, and to evaluate the oral processing and sensory properties of A-FP gels. The hardness of A-FP gels decreased gradually with the increase in the concentration of FP added (0.1, 0.4, and 1.6%). The hardness of A-FP1.6 gel was 41% lower than A gel. Rheological tests found A gel was a strong physical gel (storage modulus (G′) >>loss modulus (G″)), and the addition of FP up to 1.6% did not significantly change its G’. The G″ value decreased in A-FP gels compared to A gel. The release of galacturonic acid (GalA) was 3.4 ± 0.5, 0.5 ± 0.2, 2.4 ± 1.0, and 2.2 ± 0.7 mg/mL after digestion of A-FP1.6 gel in the oral in vivo phase (OP) and subsequent incubation in simulated gastric (SGF), intestinal (SIF), and colonic (SCF) fluids in vitro. The incubation medium after OP, SGF, and SIF digestion of A-FP1.6 contained 24−64 μg GAE/mL of PCs, while SCF contained 144 μg GAE/mL, supposing a predominant release of antioxidant activity from the gel in the colon. Chewing to readiness for swallowing A-FP gel required less time and fewer chews with less activity of the masseter and temporalis muscles. A-FP1.6 gel had a lower likeness score for taste and consistency and a similar score for appearance and aroma when compared with A gel. Thus, A-FP gels were weakened compared to A gel and required less time and muscle activity for oral processing. A-FP gel had antioxidant activity due to the PCs associated with pectin, while A gel had no antioxidant activity.

Use of natural low-methoxyl pectin from sunflower by-products for the formulation of low-sucrose strawberry jams

BACKGROUND

Due to the increasing incidence of obesity and cardiovascular diseases, consumers are demanding products with lower sugar content. In this sense, the reformulation of traditional foods with improved, safe and tasty ingredients is arousing a huge interest. Jams are conventionally produced with elevated amounts of sucrose, which increase the glycaemic index and must be avoided in certain kinds of consumers.

RESULTS

This paper describes for the first time the elaboration of strawberry jams using low-methoxyl pectins from sunflower by-products, which allowed the addition of low amounts of sucrose (10-30%). These jams were compared with best-selling commercial samples. An in-depth physicochemical, compositional, sensorial and rheological characterization was carried out. The obtained jams were safe considering a_w and pH values; samples presented enough acidity to avoid microorganism development and syneresis. The stabilizing role of sunflower pectin is noteworthy in terms of colour and other physicochemical characteristics. The organoleptic analysis showed that the taste and sweetness of laboratory samples were highly valued, although the presence of pieces of fruits was disliked some panellists. After knowing the content of added sugar used in each jam, the tasters preferred samples with 20% and 30% of sucrose over commercial samples.

CONCLUSIONS

The results show the usefulness of sunflower pectin for the elaboration of jams of low glycaemic index. © 2022 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

The assessment of microencapsulated Lactobacillus plantarum survivability in rose petal jam and the changes in physicochemical, textural and sensorial characteristics of the product during storage

The present study aimed to develop a probiotic rose petal jam containing microencapsulated L. plantarum. The attributes of L. plantarum microcapsules and bacteria viability in simulated gastrointestinal conditions and jam were assessed. In addition, L. plantarum effects on physicochemical, textural and sensorial properties of jam were studied. The microencapsulation yield, diameter, and zeta potential value of the microcapsules ranged from 90.23 to 92.75%, 14.80–35.02 µm, and − 16.83 to − 14.71 mV, respectively. The microencapsulation process significantly increases the survival of L. plantarum in simulated gastrointestinal tract and jam. In jam samples containing L. plantarum microencapsulated with 2% sodium alginate and 3.5% or 5% Arabic gum and stored for 90 days, the bacterial count was higher than the acceptable level (10⁶ CFU/g). While there was no significant difference (P > 0.05) between physicochemical characteristics of non-probiotic and probiotic jams, taste and overall acceptance scores of microencapsulated probiotic jams were higher. The microencapsulation of L. plantarum in sodium alginate (2%) and Arabic gum (5%) and its inoculation into rose petal jam could yield a new probiotic product with increased health benefits.

Punica granatum Peel Waste - An Underutilized Substrate of Therapeutic Potential: An Overview

India is the second largest consumer and producer of fruits globally. It leads to ample solid waste per year from fruit processing industries that have been proven hazardous to the surroundings. Punica granatum (Pomegranate) belongs to the Lythraceae subfamily Punicoideae, which exhibits immense nutritional properties and delicious flavoring components. The weight of this fruit mainly consists of peel, i.e., 50%, followed by 40% of arils and 10% of seeds. Thus, the major byproduct is peel that holds many valuable bioactive compounds in higher concentrations viz saponins, carotenoids, steroids, polyphenols, quercetin derivatives, caffeic acid, phenolic acids, flavonoids, ellagitannins, p-coumaric acid, chlorogenic acid, quinic acid, anthocyanidins, triterpenoids, glycosides, tannins, and many more. Consequently, it results in wideranging therapeutic applications, including antioxidative, anti-microbial, antihypertensive, anticarcinogenic, anti-genotoxic, anti-inflammatory, glucoregulation, cardio-protective, hepatoprotective and nephroprotective effects along with prebiotic potential. Considering their nutritional and therapeutic aspects, these peels can be used for many purposes rather than being disposed off. With a value-added approach, it is utilized in many food and non-food sectors. So, this review aims to explore the therapeutic potential of P. granatum peel and enlighten its diverse applications in the food industry.

Incorporation of polyphenols in baked products

Bakery foods, including breads, cakes, cookies, muffins, rolls, buns, crumpets, pancakes, doughnuts, waffles, and bagels, etc., have been an important diet of humans for thousands of years. As the nutraceuticals with various biological activities, polyphenols, especially polyphenol-enriched products are widely used in bakery foods. The polyphenol-enriched products are mainly from fruits and vegetables, including fruits in whole, juice, puree, jam, and the powder of dried fruits, pomace, and peels. Incorporation of these products not only provide polyphenols, but also supply other nutrients, especially dietary fibers for bakery products. This chapter discussed the thermal stability of different types of polyphenols during baking, and the effect of polyphenols on the sensory attributes of baked foods. Moreover, their role in mitigation of reactive carbonyl species and the subsequent formation of advanced glycation end products, antioxidant and antimicrobial activities have been also discussed. Since polyphenols are subjected to high temperature for dozens of minutes during baking, future works need to focus on the chemical interactions of polyphenols and their oxidized products (quinones) with other food components, and the safety consequence of these interactions.

Novel trends in extraction and optimization methods of bioactives recovery from pomegranate fruit biowastes: Valorization purposes for industrial applications

Pomegranate biowastes present potential economic value worldwide owing to their several health benefits mediated by a complex mixture of unique bioactives. The exploitation of these bioactives has motivated the exploration of eco-friendly, efficient, and cost-effective extraction techniques to maximize their recovery. The current review aims to provide updated technical information about bioactives extraction mechanisms from pomegranate wastes (seeds and peel), their advantages and disadvantages, and factors towards optimization. A comparative overview of the modern green extraction techniques viz., supercritical fluid extraction, ultrasound-assisted extraction, microwave-assisted extraction, pressurized liquid extraction, and eutectic solvent mixture as alternatives to conventional extraction methods for seeds and peel is presented. Approaches focused on biowastes modification for properties improvement are also discussed. Such comprehensive review shall provide the best valorization practices of pomegranate biowastes and its application in food and non-food areas focusing on original methods, innovation, protocols, and development to be considered for other fruit biowastes.

Food additives: From functions to analytical methods

Food additives refer to all kinds of trace substances used in food or food processing to preserve flavor or enhance food taste, appearance, or other qualities. At present, artificial synthetic food additives have gradually replaced the natural food additives and many problems related to food additives, involving the abuse of food additives, excessive additives or even toxic additives. Obviously, food additives can bring people great sensory enjoyment and commercial convenience, but they may also cause potential risks to human health. So, it is of high significance to conduct quantitative analysis on the content of food additives. According to their functions and the regulatory requirements of food additives, this review starts from the classification and structures of various food additives involving colorants, preservatives, antioxidants, sweeteners, emulsifiers, stabilizers, thickeners, gelling agents. It then summarizes and discusses analytical methods for quantification of food additives including modern immunoassays and other biotechnological methods. The proposed review aspires to fill in the knowledge gap of food additives between academia and industry by covering all kinds of analytical methods for quantifying food additives.

Food Hydrocolloids from Butternut Squash (Cucurbita moschata) Peel: Rheological Properties and Their Use in Carica papaya Jam

Hydrocolloids are a class of functional ingredients that are widely used in the development of food structures. The hydrocolloids are mainly polysaccharides and some proteins that are applied in various food products. For this reason, natural sources that are friendly to the environment must be sought for their extraction. Therefore, this study aimed to extract hydrocolloids from butternut squash (Cucurbita moschata) peels-HBSP-and determine the proximal composition and rheological properties as well as their use effect in a microstructure product like fruit jam from Carica papaya. Hydrocolloids were obtained from butternut squash at pH 3, 7, and 10 and at different temperatures, presenting higher yield values at 80 °C with higher carbohydrate and protein contents and non-Newtonian flow behavior type shear-thinning. In order to analyze the influence of HBSP on the rheological properties of the microstructured product, the samples were employed as a partial substitute of pectin in C. papaya jam (CPJ), showing a positive effect on the jam matrix due to the addition of hydrocolloids. The physicochemical properties of jams did not present significant differences. CPJ presents non-Newtonian behavior type shear-thinning adjusting to the Herschel-Bulkley model. The dynamic viscoelastic rheological test characterized the jam as a gel-like state when the storage modulus values were higher than the loss modulus values in the frequency ranges studied. Regarding the addition of HBSP, this modified the color parameter, presenting a reddish color with an increase in tonality, and the sensory evaluation showed that the M3 sample was better than the other products, with a higher level of satisfaction. The obtained results show that butternut squash peel is suitable for the obtention of hydrocolloids, and they can be used as a raw material in the development and formulation of food products, as well as their byproducts can be used to solve problems with organic waste from the agroindustry in an environmentally friendly way.

Optimization of physicochemical, textural, and rheological properties of sour cherry jam containing stevioside by using response surface methodology

The response surface method (RSM) was used to produce sour cherry jam containing stevia sweetener with favorable physicochemical, textural, and rheological properties. The experiments were designed based on RSM using a central composite design (CCD) with three independent variables: sugar, pectin, and stevia. Sample processing was performed at five levels of sucrose (10%-50%), pectin (0.1%-0.5%), and stevia (0.2%-0.6%) at a constant fruit weight of 300 g. To evaluate the jam, the physicochemical, textural, and rheological properties of the jam were determined and optimized. The concentrations of sucrose, pectin, and stevia had a significant effect on the textural and rheological properties of the jam. The results showed that increasing the concentration of sucrose is the main factor in increasing the soluble solids and the total sugar content of the jam. Pectin had a positive effect on textural characteristics such as hardness and adhesiveness of the jam, while the cohesiveness of the jam decreased with increasing pectin. Herschel-Bulkley model was appropriate for describing the rheological behavior of the stable state of sour cherry jam containing stevia. Decreasing sucrose concentration is accompanied by a decrease in yield stress and consistency index of jam samples due to the TSS reduction. Pectin also had a positive effect on the amount of yield stress and consistency index. Dynamic rheological tests indicated that the sour cherry jam is a weak gel. The predominant viscose behavior and the formation of a dilute solution were evident in the samples with 10% and 20% sucrose concentrations. The most favorable condition for the production of the jam was obtained at a 36.5% sugar, 0.277% pectin, and stevia 0.30%.

Nutritional and Bioactive Components of Pomegranate Waste Used in Food and Cosmetic Applications: A Review

Pomegranate (Punica granatum L.) is a fruit that is rich in bioactive compounds that has a biowaste (rind and seed) with the potential to be converted into value-added products in a wide variety of applications. Recent studies have demonstrated the potent antioxidant and antimicrobial effects of using pomegranate rind and seed as natural food additives, thus making researchers incorporate them into bioplastics and edible coatings for food packaging. Additionally, these components have shown great plasticizing effects on packaging materials while extending the shelf life of food through active packaging. Even within skin health applications, pomegranate seed oil and its bioactive compounds have been particularly effective in combating UV-induced stresses on animal skin and in-vitro models, where cells and microorganisms are separated from the whole organism. They have also aided in healing wounds and have shown major anti-inflammatory, analgesic, and anti-bacterial properties. This review highlights all of the relevant and recent food and skin health applications found in the value-added conversion of pomegranate biowaste. The lack of research in particular areas and future outlook are also discussed.

Rheological characterization of RG-I chicory root pectin extracted by hot alkali and chelators

This work aimed to extract gelatinous chicory root pectin (CRP) and evaluated the rheological behavior of the dispersions and gels. CRP was extracted by citric acid (CEP), alkaline (AEP), ammonium oxalate (OEP) and sodium citrate (SEP). The yield, molecular weight (Mw) and the degree of esterification (DE) of pectin samples varied from 8.8 to 14.8% (w/w), 204 to 336 k Da and 4.0 to 47.4%, respectively. AFM studies showed self-organize on mica of CEP, revealing a random coil conformation due to the interaction of multiple branching, whereas, AEP exhibited long linear filamentous structures. The flow behavior study verified the pseudoplastic character of CEP and SEP at 25 °C, while OEP and AEP belonged to dilatant fluid, besides, a closed hysteresis loop was observed when the CEP concentration increased to 1.5%. OEP gel was thermo insensitive and stiff, AEP gel presented most sensitive to calcium ion but more brittle, and SEP was observed a weak syneresis in spite of the poor gelation property. The texture analysis indicated OEP gel had a superior firmness and chewiness. These findings demonstrated that CRP may be attractive as a thickener or gelling agent to modulate textures of sugar-free and calcium content food.

Addition of Orange Peel in Orange Jam: Evaluation of Sensory, Physicochemical, and Nutritional Characteristics

Orange is highly nutritious and a source of phytochemical compounds. However, its by-products are usually discarded. In this study, we evaluated the effect of orange peel (OP) addition in orange jam on sensory, physicochemical, and nutritional characteristics. Four jam formulations were elaborated with different OP levels: OP0 (standard), OP4, OP8, and OP12 (Orange Peel 0, 4, 8 and 12%, respectively). All samples were evaluated for sensory acceptability, and physicochemical and nutritional composition. The addition of 12% orange peel in jam reduced (p < 0.05) the acceptability for all evaluated attributes, as well as overall acceptance and purchase intention. However, OP utilization increased (p < 0.05) the levels of water activity, soluble solids, titratable acidity, and sugars. Soluble solids/titratable acidity ratio, luminosity (L*), and yellow content (b*) decreased in all added OP jams, while red content (a*) increased. No change in the pH and moisture values of the product were observed after OP addition. Ash, protein, lipid, dietary fiber, ascorbic acid, carotenoids, phenolic compounds, and antioxidant capacity values increased after OP addition, while carbohydrate and energy content decreased. A texture test showed that adhesiveness decreased, while gumminess, chewiness, and elasticity increased after OP addition. We concluded that the addition of up to 8% orange peel in jam maintains sensory acceptability similar to that of the standard product. OP addition is a viable alternative to improve some of the product's physicochemical and nutritional characteristics.

Stability of Anthocyanins, Phenolics and Color of Tart Cherry Jams

The aim of this work was to assess the effect of a set storage period on the phenolics, anthocyanins, antioxidant activity, color, and texture of three types of jams made from tart cherry. The prepared samples of tart cherry jams were: (1) regular jam; (2) extra jam; and (3) light jam. The samples were stored at room temperature for eight months. Results of the investigated parameters after storage were compared with the results after sample preparations, and between the different jam samples. The light jam had the highest phenolic content and anthocyanin content (3.34 g/kg and 985.52 mg/kg). Consequently, the light jam had the highest antioxidant activity determined by ABTS (2,2’-azinobis(3-ethylbenzothiazoline sulfonic acid)) and DPPH (2,2-diphenyl-1-picrylhydrazil) method. After storage, the highest retention of the phenolics had regular jam and extra jam (85%), while the lowest retention (74%) were found in the light jam. Anthocyanin stability was the highest in the regular jam, then the extra jam (15%), and then the light jam, with retention of 22%, 15%, and 12%, respectively. Color parameters and textural parameters also depended on jam type, as well as on storage conditions. Since the investigated types of jams differed in content of fruit and water, these are the most important factors that cause the change in the retention of phenolics and anthocyanins, as well as a change in color and textural parameters.

Composition, antibacterial and antioxidant activities of Pimpinella saxifraga essential oil and application to cheese preservation as coating additive

The effect of Pimpinella saxifraga essential oil (PSEO) addition (1-3%) in sodium alginate coating on the bacterial and oxidative stability of cheese was studied during refrigerated storage. The GC-HRMS analysis of PSEO showed that anethole, pseudoisoeugenol and p-anisaldehyde were the main components. The PSEO exhibited strong in vitro DPPH radical scavenging activity (IC₅₀ = 6.81 µg/mL), β-carotene bleaching inhibition (IC₅₀ = 206 µg/mL), ferric reducing power (EC₅₀ = 35.20 µg/mL), total antioxidant activity (213.96 ± 11.12 µmol/mL α-tocopherol equivalent) and notable DNA protection potential. Additionally, PSEO displayed potent antibacterial activity against 3 Gram-positive and 3 Gram-negative bacteria (MICs = 0.78-3.12 mg/mL). The acute toxicity of PSEO was determined using mice model (LD₅₀ = 976.2 mg/kg). The enrichment of sodium alginate coating with PSEO, particularly at 3%, improved cheese preservation by reducing the weight loss, preserving the pH and color and enhancing oxidative and bacterial stability without unpleased flavor for consumers.

Texture, Color, and Sensory Features of Low-Sugar Gooseberry Jams Enriched with Plant Ingredients with Prohealth Properties

The aim of this research was to evaluate texture, color, and sensory parameters of low-sugar gooseberry jams with added black chokeberry, elderberry, Japanese quince, flax seeds, wheat germ, and inulin. The jams were stored at two temperatures of 10°C and 20°C. The highest gel strength (Fe) was recorded in the jams with wheat germ (2.75 N), flax seeds (2.74 N), and inulin (1.95 N). The brightest color L⁎ was noted in the gooseberry jams enriched with flax seeds and wheat germ, while the darkest color was noted in those with added black chokeberry and elderberry fruit. In the sensory evaluation, the gooseberry jam without plant ingredients, along with the products enriched with black chokeberry, elderberry, and inulin, scored high at almost 5 on a 5-point scale. The remaining jams had scores of 4.4–4.8 points. Cool storage of jams had a better effect on color and texture, while sensory features were affected to a lesser degree.