Beneficial effects of polysaccharides on the solubility of Mytilus edulis enzymatic hydrolysates

Maillard reaction conjugates of millet bran globulin and Arabic gum for curcumin encapsulation: Physicochemical characterization, storage stability, and in vitro digestion

In this study, millet bran globulin (MBG) and Arabic gum (AG) conjugates were prepared through the Maillard reaction (MR) and applied to curcumin-loaded Pickering emulsions. The effect of MR on MBG-AG conjugates (MBG-AG con) was evaluated by the degree of grafting (DG), the absorbance of intermediate reactants, and the browning index. The emulsifying properties of MBG-AG con with different DGs were assessed using the emulsifying activity index (EAI) and emulsifying stability index (ESI). Curcumin-loaded Pickering emulsions were prepared using optimized conjugates. Results indicated that MR enhanced the conjugates emulsifying properties, leading to improved emulsion performance. Compared to MBG, the optimized conjugates exhibited approximately 252.3 % and 167.1 % increases in EAI and ESI, respectively. The formation of MBG-AG con was confirmed through polyacrylamide gel electrophoresis, Fourier transform infrared, and fluorescence spectroscopy. Morphological changes before and after MR were observed through scanning electron microscopy. In comparison to MBG-stabilized emulsions, conjugate-stabilized emulsions exhibited smaller droplets, higher curcumin encapsulation efficiency (over 80 %), and better apparent viscosity. During simulated digestion, the bioavailability of curcumin reached 88.67 % in Pickering emulsions stabilized by 5 % conjugates. This study demonstrated the potential application of MBG-AG con prepared via MR in stabilizing Pickering emulsions, providing new theoretical insights into curcumin encapsulation.

Effects of Ultrasound-Assisted Treatment on Physicochemical Properties and Biological Activities of Polysaccharides from Sargassum

The aim of this study was to investigate the effect of ultrasonic treatment on the physicochemical properties and bioactivities of polysaccharides from Sargassum samples (SPs) extracted with different solvents. The alkali-assisted extraction of polysaccharide (SPA), acid-assisted extraction of polysaccharides from (SPB), and hot water extraction of polysaccharides (SPCs) were perofrmed on Sargassum. Ultrasonic treatment was performed with the SPA, SPB, and SPC in turn, and named USPA, USPB, and UPSC, respectively. The results showed that SPs mainly consisted of mannose, glucose, xylose, rhamnose, galactose, fucose, glucuronic acid, mannuronic acid and guluronic acid. The molecular weight of SPA (434.590 kDa) was the lowest under different solvent extractions, and the molecular weights of SPA, SPB, and SPC were reduced after sonication. SPA had a high carbohydrate content of (52.59 ± 5.16)%, and SPC possessed a high sulfate content of (3.90 ± 0.33)%. After ultrasonic treatment, the biological activities of SPs were significantly increased. The α-glucosidase inhibition assay reflected that the IC50 values of the ultrasonic treatment SPs were significantly reduced, and USPA showed the best activity, with an IC50 of (0.058 ± 0.05) mg/mL. Antioxidant assays demonstrated that USPC exhibited greater DPPH- and ABTS-scavenging capacity. In the anti-glycosylation assay, SPs after sonication demonstrated excellent inhibition of glycosylation products and protein oxidation products, with USPA showing the highest inhibition rate. In conclusion, the biological activities of SPs were enhanced after ultrasonic treatment. This study provides a theoretical reference for their use in food and medicines.

Structural characterization and human gut microbiota fermentation in vitro of a polysaccharide from Fucus vesiculosus

In this study, an acidic polysaccharide (FVP-7 A) was isolated from Fucus vesiculosus by DEAE-Sepharose™ fast flow. The chemical composition, glycosidic bonds and in vitro fecal fermentation characteristics of FVP-7 A were studied. Results shown that FVP-7 A was a homogenous polysaccharide with average molecular weight of 30.94 kDa. Combined with FT-IR, monosaccharide composition, methylation and NMR analysis, the glycosidic bonds of FVP-7 A mainly composed of →4)-β-D-Manp-(1→, →3)-α-L-Fucp-(1→, α-D-Manp-(1→, →3)-β-D-Manp-(1 → and →4,6)-α-D-Manp-(1→. The zeta potential and atomic force microscopy images indicated that FVP-7 A could exist stably as a single chain-like structure in dilute solution. After gut fermentation, FVP-7 A was utilized and promoted multiple short-chain fatty acids production, especially acetic acid, butyric acid and valeric acid. For prebiotics, FVP-7 A significantly increased the relative abundance of short-chain fatty acids producing bacteria such as Bacteroides, Lachnospira, Faecalibacterium, Ruminococcus, Oscillospira and Dialister, and inhiited the growth of the harmful bacteria Shigella. These results indicated that FVP-7 A could be used as a potential dietary supplement to improve intestinal health.

Optimization of ultrasound-assisted aqueous two-phase extraction of polysaccharides from seabuckthorn fruits using response methodology, physicochemical characterization and bioactivities

BACKGROUND

Seabuckthorn fruits contains many active subtances, among them, the seabuckthorn polysaccharide is one of the main active ingredients, and exhibits diverse bioactivities. The extraction of polysaccharides from seabuckthorn fruits is the most important step for their wide applications. Ultrasound-assisted aqueous two-phase extraction (UA-ATPE) is a promising green method for extracting polysaccharides. Additionally, physicochemical characterization and antioxidant activities can evaluate the potential functions and applications in the food and medicine industries.

RESULTS

Based on the single-factor experiments, 20.70% (w/w) ammonium sulfate ((NH₄ )₂ SO₄ ) and 27.56% (w/w) ethanol were determined as the suitable composition for aqueous two-phase. The optimum conditions of UA-ATPE obtained by response surface methodology were as follows: ultrasonic power (390 W), extraction time (41 min), liquid-to-material ratio (72: 1 mL/g), and the total yield of the polysaccharides reached 34.14 ± 0.10%, The molecular weights of the purified upper-phase seabuckthorn polysaccharide (PUSP) and the purified lower-phase seabuckthorn polysaccharide (PLSP) were 65 525 and 26 776 Da, respectively. PUSP and PLSP contained the same six monosaccharides (galacturonic acid, rhamnose, xylose, mannose, glucose and galactose), but with different molar ratios. Furthermore, PUSP and PLSP displayed certain viscoelastic property, had no triple helical structure, possessed different thermal stability, surface morphology and conformation in aqueous solution. PUSP and PLSP displayed strong antioxidant properties by the assays of scavenging ability of ABTS⁺ ·, the protection of DNA damage and erythrocyte hemolysis.

CONCLUSION

UA-ATPE significantly increased the yield of seabuckthorn polysaccharides. PUSP and PLSP were different in many aspects, such as molar ratio, surface shape and antioxidant activities. Seabuckthornpolysaccharides possess great potential in medicine and functional foods. © 2022 Society of Chemical Industry.

Insights into the role of prechlorination in algae-laden raw water distribution process: Algal organic matter and microcystin-LR release, extracellular polymeric substances (EPS) aggregation, and pipeline biofilm communities

Prechlorination routinely applied for the treatment of algae-laden raw water has received extensive attention due to its influence on water quality and aquatic microbes. In this study, prechlorination experiments with different doses were conducted in sets of model raw water distribution systems. With the elevated dose of chlorine and prolonged hydraulic retention time (HRT), the ratio of intact algal cells decreased, and the stability of water enhanced. Dissolved organic carbon (DOC) and nitrogen (DON) increased when chlorine dose elevated from 0 to 0.5 mg/L but decreased with elevations from 0.5 to 2.0 mg/L, while UV₂₅₄ showed a monotonically increasing tendency. DOC, DON and extracellular microcystin-LR increase initially and decrease thereafter with the prolonged HRT. Notably, the effects of prechlorination on extracellular polymeric substances aggregation behavior on pipe walls and microbial community composition was revealed, providing more profound understanding of the community dynamics in this engineered system. This study helped optimize strategies to improve the stability and efficiency of pretreatment of algae-laden water.

Characterization of selenized polysaccharides from Ribes nigrum L. and its inhibitory effects on α-amylase and α-glucosidase

The polysaccharide from Ribes nigrum L. (RCP) was modified by nitric acid-sodium selenite method. After purification by Sepharose-6B, high purity native (PRCP) and three selenized polysaccharides (PRSPs) with different selenium contents were obtained. Compared with PRCP, PRSPs possessed the lower molecular weight, better water-solubility, physical stability and rheological properties. FT-IR and NMR spectra confirmed PRSPs had the characteristic absorption peaks of polysaccharides and the glycosidic bond types were not changed after selenylation modification, whereas the selenyl groups existing in PRSPs were mainly introduced at the C-6 position of sugar residue →4)-β-d-Manp-(1→. Moreover, PRSPs displayed obviously smoother and smaller flaky structure than PRCP, and their inhibitory effects on α-amylase and α-glucosidase also were greater than PRCP. PRSPs exhibited a reversible inhibition on two enzymes in competitive manner and quenched their fluorescence through the static quenching mechanism. The polysaccharide-enzyme complex was spontaneously formed mainly driven by the hydrophobic interaction and hydrogen bonding.

Preparation, characterization, antioxidant and antiglycation activities of selenized polysaccharides from blackcurrant

An ultrasound-assisted enzymatic method was used to extract the polysaccharides from blackcurrant fruits (BP), and then a nitric acid-sodium selenite method was employed to prepare twelve kinds of selenized blackcurrant polysaccharides (SBPs). Among them, SBP-1, SBP-2 and SBP-3 with different selenium contents of 250 ± 11, 312 ± 15 and 643 ± 24 μg g⁻¹, displayed relatively higher 2,2-diphenyl-1-picrylhydrazyl radical (DPPH˙) scavenging activities than the others. After treating with a Sepharose-6B chromatography column, the purified blackcurrant polysaccharide (PBP) and three selenized polysaccharides (PSBP-1, PSBP-2, PSBP-3) with high purity were obtained. Compared with PBP, PSBPs possessed a larger absolute value of zeta potential (ZP) and smaller particle size, indicating the positive influence of selenized modification on physical stability of polysaccharides. Ultraviolet (UV), Fourier transform infrared (FT-IR) and circular dichroism (CD) spectra confirmed that selenium had been introduced onto the polysaccharide structure. X-ray diffraction (XRD) and I₂–KI reaction results indicated that selenized modification did not cause an obvious change in crystal form and branch structure of blackcurrant polysaccharides. In addition, PSBPs were superior to PBP in antioxidant and antiglycation capacities, and the bioactivities of PSBPs were significantly improved in positive correlation with selenium content. This study suggested that PSBPs may be a potential selenium source and serve as functional food and medicine.

An ultrasound-assisted enzymatic method was used to extract the polysaccharides from blackcurrant fruits (BP), and then a nitric acid-sodium selenite method was employed to prepare twelve kinds of selenized blackcurrant polysaccharides (SBPs).

Biological and conventional food processing modifications on food proteins: Structure, functionality, and bioactivity

Food proteins are important nutrients for human health and thus make significant contributions to the unique functions of different foods. The modification of proteins through physical and biological processing could improve the functional and nutritional properties of food products; these changes can be attributed to modifications in particle size, solubility, emulsion stability, secondary structure, as well as the bioactivities of the proteins. Physical processing treatments might promote physical phenomena, such as combined friction, collision, shear forces, turbulence, and cavitation of particles, and lead to changes in the particle sizes of proteins. The objective of this review is to illustrate the effect of physical and biological processing on the structure, and physical and chemical properties of food-derived proteins and provide insights into the mechanism underlying structural changes. Many studies have suggested that physical and biological processes, such as ultrasound treatment, high pressure homogenization, ball mill treatment, and enzymatic hydrolysis could affect the structure, physical properties, and chemical properties of food-derived proteins. Some important applications of food-derived proteins are also discussed based on the relationships between their physical, chemical, and functional properties. Perspectives from fundamental or practical research are also brought in to provide a complete picture of the currently available relevant data.