Insight into the evolution of flavor compounds during cooking of common beans utilizing a headspace untargeted fingerprinting approach

The development of volatile off-flavor compounds in soy protein isolates and plant meat during storage

The off-flavor associated with soy protein isolate (SPI) has negatively impacted the full acceptance of plant meat. This study investigated the factors that contribute to the development of volatile compounds as well as the volatile compounds responsible for the off-flavors. The main objective of this study was to investigate the formation of volatile off-flavor compounds in soy protein isolates and plant meat during storage. The samples were stored at 4 ± 0.5 °C, 25 ± 2 °C, and 37 ± 1 °C for durations of 0, 2, 4, 6, and 8 weeks, respectively. They were investigated using physicochemical properties, sensory, electronic nose (E-nose), and gas chromatography-mass spectrometry (GC-MS). The volatile off-flavor compounds were identified and plant meat exhibited significantly higher levels of off-flavors than SPI. Oil bodies, excessive moisture, elevated temperature, and extended storage were recognized as the main factors contributing to the development of off-flavors. Therefore, the extended storage of SPI and plant meat resulted in a continuous reaction that eventually caused the development of volatile off-flavor compounds.

The roles of lipoxygenases and autoxidation during mackerel (Scomberomorus niphonius) dry-cured processing

The roles of enzymatic (Lipoxygenases, LOX) oxidation and autoxidation in the dry-cured processing of mackerel were investigated by adding exogenous substances in this study. Four groups, namely control, chlorogenic acid (inhibiting LOX activity), EDTA-2Na (inhibiting autoxidation), and exogenous LOX (adding eLOX), were assigned. The results showed that lipid oxidation of mackerel was reduced by inhibiting LOX activity and autoxidation, while adding eLOX promoted lipid oxidation. Inhibition of LOX activity and autoxidation suppressed fatty acid accumulation mainly in the air-drying and curing stage, respectively. The total contents of key flavors in the mackerel during dry-cured processing were decreased by inhibiting LOX activity and autoxidation, and the former inhibitory effect was stronger than autoxidation, while it was corresponding increased through adding eLOX, of particular in the later stage of air-drying. Collectively, LOX could promote the flavor formation of the mackerel in the dry-cured processing, which could be applied in the flavor adjustment of aquatic products or some similar fields.

Formation of Lipid-Derived Flavors in Dry-Cured Mackerel (Scomberomorus niphonius) via Simulation of Autoxidation and Lipoxygenase-Induced Fatty Acid Oxidation

In this study, lipoxygenase (LOX) extracted from dry-cured mackerel was purified, resulting in a 4.1-fold purification factor with a specific activity of 493.60 U/min·g. LOX enzymatic properties were assessed, referring to its optimal storage time (1-2 days), temperature (30 °C), and pH value (7.0). The autoxidation and LOX-induced oxidation of palmitic acid (C16:0), stearic acid (C18:0), oleic acid (C18:2n9c), linoleic acid (C18:2n6c), arachidonic acid (C20:4), EPA (C20:5), and DHA (C22:6n3) were simulated to explore the main metabolic pathways of key flavors in dry-cured mackerel. The results showed that the highest LOX activity was observed when arachidonic acid was used as a substrate. Aldehydes obtained from LOX-treated C18:1n9c and C18:2n6c oxidation, which are important precursors of flavors, were the most abundant. The key flavors in dry-cured mackerel were found in the oxidative products of C16:0, C18:0, C18:1n9c, C18:2n6c, and C20:4. Heptanaldehyde could be produced from autoxidation or LOX-induced oxidation of C18:0 and C18:1n9c, while nonal could be produced from C18:1n9c and C18:2n6c oxidation. Metabolic pathway analysis revealed that C18:1n9c, C18:2n6c, EPA, and DHA made great contributions to the overall flavor of dry-cured mackerel. This study may provide a relevant theoretical basis for the scientific control of the overall taste and flavor of dry-cured mackerel and further standardize its production.

Unravelling dynamic changes in non-volatile and volatile metabolites of pulses during soaking: An integrated metabolomics approach

An integrated metabolomics approach based on UPLC-QTOF-MS and HS-SPME-GC-orbitrap-MS was performed to investigate the dynamic changes of metabolite profiling in chickpeas, red speckled kidney beans, and mung beans during soaking. There were 23, 23, 16 non-volatile metabolites, and 18, 21, 22 volatile metabolites were identified as differential metabolites in chickpeas, red speckled kidney beans, and mung beans during soaking, respectively. These metabolites mainly included flavonoids, lysophosphatidylcholines (LPCs), lysophosphatidylethanolamines (LPEs), fatty acids, alcohols, aldehydes, and esters. The key time points responsible for the significant changes in metabolites and quality of the three pulses were 4, 8, and 24 h of soaking. Results revealed that the variations of some metabolites could attribute to oxidation and hydrolysis reactions. These results contribute to a better understanding of how soaking affects pulses quality, and provide useful information for determining soaking time according to nutritional and sensory requirements of their final products or dishes.

Effects of Hydrothermal Processing on Volatile and Fatty Acids Profile of Cowpeas (Vigna unguiculata), Chickpeas (Cicer arietinum) and Kidney Beans (Phaseolus vulgaris)

Legumes are an economical source of protein, starch, dietary fibre, fatty acids, vitamins and minerals. However, they are not as fully utilised, due to volatile compounds contributing to their undesirable odour. The purpose of this work was to understand the processing time's effect on the legumes' volatile profile. Hence, this study investigated the effects of hydrothermal processing times on the volatile and fatty acids profiles of cowpeas, chickpeas and kidney beans. All legumes were pre-soaked (16 h) and then hydrothermally processed at 95 °C for 15 to 120 min, using an open system to approximate standard household cooking practices and a closed system to represent industrial processing. Alcohol, aldehyde, acid and ester volatile compounds showed decreasing trends during processing, which can be associated with enzyme inactivation and process-induced degradation. This work showed that processing at 95 °C for 30 min significantly reduced the number of compounds commonly associated with undesirable odour, but showed no significant change in the fatty acid profile. Other volatiles, such as furanic compounds, pyrans and sulphur compounds, showed an increasing trend during processing, which can be related to the Maillard reactions. This observation contributes to the growing knowledge of legume processing and its impact on volatile flavour. It can advise consumers and the industry on selecting processing intensity to maximise legume utilisation.

Authentication of the geographical origin of sesame seeds based on proximate composition, multi-element and volatile fingerprinting combined with chemometrics

The current study was designed to discriminate and authenticate sesame seeds cultivated in China, Togo, Sudan, Mozambique and Ethiopia. Fingerprinting analysis combined with chemometrics was applied to clarify the differences present in the chemical elements and volatiles of sesame seeds. Clear separations were observed among different groups of sesame seeds. Discrimination models were established with 100 % correction rate for the authentication of investigated sesame seeds. A panel of 14 chemical elements and 12 volatile compounds with p value < 0.05 and VIP score > 1 was suggested as important contributors for the discrimination of sesame seeds from China, Togo, Sudan, Mozambique and Ethiopia. In conclusion, our data demonstrate that chemical analysis together with chemometrics is of great applicability to authenticate the geographical origins of sesame seeds.

Descriptive Analysis of Seven Leguminous Plants in Korea

Legumes are dicotyledonous plants, and they represent the third-largest plant family seeds distributed glo-bally. This study aimed to develop a lexicon for seven well-known legumes: kidney bean, mung bean, chickpea, green kernel black bean, black bean, soybean, and red bean. A sensory lexicon describing the aroma characteristics of legumes was developed, and the intensity of each aroma attribute was evaluated using a 15-point universal scale in Spectrum^TM. Nine aroma terms were developed: boiled egg yolk, bean sprout, chicken breast, boiled chestnut, soymilk, green bean, raw peanut shell, soil odor, and mango. The lexicon identified nine descriptions for the sensory characteristics of legumes. Kidney bean, mung bean, and red bean had high green bean, bean sprout, and soil odor aromas, whereas soybean, green kernel black bean, black bean, and chickpea had strong boiled egg yolk, boiled chestnut, and chicken breast aromas. These results can aid food product developers with flavor optimization in product formulation.

Sensory descriptors for pulses and pulse-derived ingredients: Toward a standardized lexicon and sensory wheel

The organoleptic quality of pulses and their derived ingredients is fundamental in human utilization and evolution of food. However, the widespread use of pulses is hindered by their inherent sensorial aspects, which are regarded as atypical by the consumers who are unfamiliar to them. In most studies involving sensory assessment of pulses and pulse-ingredients using classical descriptive analysis methods, assessors establish their own lexica. This review is a synthesis of descriptive terms by which sensations emanating from pea, chickpea, lentil, faba bean, dry bean, bambara groundnut, lupin, pigeon pea and cowpea, and their derived ingredients have been described in the literature. Studies involving sensory assessment of processed whole seeds, slurries of raw flour, slurries of protein extracted from raw flour, and food products containing components of pulses were considered. The terms are categorized into those denoting basic taste, aroma, flavor, and trigeminal sensations. Bitterness is the most widely perceived basic taste. Beany, which is broad and complex with subcharacter notes, is predominantly used to describe aroma and flavor. The frequency of use of the collated terms in the reviewed studies was used to establish a sensory wheel. Inconsistency in the use of descriptive terms in the literature necessitates establishment of a standard lexicon that can be applied in both classical and increasingly popular rapid descriptive methods (e.g., check-all-that-apply) throughout the pulse value chain. This review is timely considering the dominance of pulses in plant-based foods and their increasing appeal to the food industry.

The Impact of Drying and Rehydration on the Structural Properties and Quality Attributes of Pre-Cooked Dried Beans

Fresh common beans can be made ‘instant’ to produce fast-cooking beans by first soaking and cooking the beans before drying to create a shelf-stable product that can be rehydrated at the time of use. This study investigated the interplay between the drying process (air, vacuum and freeze drying), the microstructure and functional attributes of rehydrated pre-cooked beans. The microscopic study revealed that the three different drying techniques resulted in distinctly different microstructures, with the freeze drying process resulting in highly porous materials, while the air- and vacuum-dried samples underwent shrinkage. Additionally, the rehydration behavior (modeled using empirical and diffusion models) demonstrates that the high rehydration rate of freeze-dried beans is due to capillarity, while rehydration, in the case of air- and vacuum-dried beans, is primarily diffusion-controlled. Irrespective of the drying technique, the high rehydration capacity supports little to no structural collapse or damage to the cell walls. The color and texture of the rehydrated beans did not differ greatly from those of freshly cooked beans. The total peak area of the volatiles of rehydrated beans was significantly reduced by the drying process, but volatiles characteristic of the cooked bean aroma were retained. This new understanding is beneficial in tailoring the functional properties of pre-cooked dry convenient beans requiring short preparation times.

Thermal treatment of common beans (Phaseolus vulgaris L.): Factors determining cooking time and its consequences for sensory and nutritional quality

Over the past years, the shift toward plant-based foods has largely increased the global awareness of the nutritional importance of legumes (common beans (Phaseolus vulgaris L.) in particular) and their potential role in sustainable food systems. Nevertheless, the many benefits of bean consumption may not be realized in large parts of the world, since long cooking time (lack of convenience) limits their utilization. This review focuses on the current insights in the cooking behavior (cookability) of common beans and the variables that have a direct and/or indirect impact on cooking time. The review includes the various methods to evaluate textural changes and the effect of cooking on sensory attributes and nutritional quality of beans. In this review, it is revealed that the factors involved in cooking time of beans are diverse and complex and thus necessitate a careful consideration of the choice of (pre)processing conditions to conveniently achieve palatability while ensuring maximum nutrient retention in beans. In order to harness the full potential of beans, there is a need for a multisectoral collaboration between breeders, processors, and nutritionists.

Catalytic properties of lipoxygenase extracted from different varieties of Pisum sativum and Lens culinaris

Lipoxygenase (LOX, E.C. 1.13.11.12), among its various roles, catalyzes the degradation of polyunsaturated fatty acids and it is considered to be one of the main causes of undesirable off-flavor developments in legumes. The role of LOX in postharvest physiology is particularly significant in seeds with high values of lipoxygenase and linoleic acid levels. This research aimed to study the biochemical properties of the LOX extracted from green pea (Pisum sativum L. var. Léda, Zeusz, Zsuzsi), dry pea (Pisum sativum L. var. Hanka, Irina, Lutra), and lentil (Lens culinaris L., var. Pinklevi, Rézi, Castelluccio), using linoleic acid as a substrate. The raw extracts showed different catalytic properties, with dry pea (var. Irina) that expressed the highest LOX activity, while lentil (var. Pinklevi) expressed the lowest activity. To complete the biochemical characterization of the crude LOX extracts, their optimal pH and temperature were also examined. The highest value of lipoxygenase activity in the pH range 6-7 was measured in all legumes. The optimal temperature for all extracts fell within the range of 30-60°C given the nutritional importance of legumes. This study will serve as a basis for further detailed investigation of the legumes LOX activity and its roles in food products related to legumes. PRACTICAL APPLICATIONS: This study investigated the biochemical properties of lipoxygenase (LOX) extracted from different varieties of lentil and pea, the two important leguminous crops serving as the main protein source for the population of humans worldwide. The biochemical properties of LOX extracted from legumes showed large differences in terms of kinetic properties. The results of this study revealed that the use of lipoxygenase can be a suitable index for managing stabilization techniques of lentil and pea, in order to inhibit the lipid oxidation in grain legume without compromising its nutritional value.

Fava bean (Vicia faba L.) for food applications: From seed to ingredient processing and its effect on functional properties, antinutritional factors, flavor, and color

The food industry, along with the consumers, is interested in plant-based diet because of its health benefits and environmental sustainability. Vicia faba L. (V. faba) is a promising source of pulse proteins for the human diet and can yield potential nutritional and functional ingredients, namely, flours, concentrates, and isolates, which are relevant for industrial food applications. Different processes produce and functionalize V. faba ingredients relevant for industrial food applications, along with various alternatives within each unit operation used in their production. Processing modifies functional properties of the ingredients, which can occur by (i) changing in overall nutritional composition after processing steps and/or (ii) modifying the structure and conformation of protein and of other components present in the ingredients. Furthermore, V. faba limitations due to off-flavor, color, and antinutritional factors are influenced by ingredient production and processing that play a significant role in their consumer acceptability in foods. This review attempts to elucidate the influence of different ways of processing on the functional, sensory, and safety aspects of V. faba L. ingredients, highlighting the need for further research to better understand how the food industry could improve their utilization in the market.

Effects of frying, roasting and boiling on aroma profiles of adzuki beans (Vigna angularis) and potential of adzuki bean and millet flours to improve flavor and sensory characteristics of biscuits

Volatile compounds of raw and cooked adzuki beans under three cooking methods namely frying, roasting, and boiling were extracted and identified. The odorants in raw beans changed from "green" and "grassy" to "roasted" and "nutty" in fried and roasted beans. Roasted adzuki beans had the greatest number of volatile compounds and best flavor properties. Because volatiles improve biscuit flavor profiles, biscuits were prepared in which wheat flour was substituted with adzuki bean flour and/or millet flour. The effects of grain flours on the sensory acceptability and aroma of biscuits were evaluated. Descriptive sensory analysis showed that the adzuki bean-millet biscuit had the best sensory quality. Correlation of volatile compounds, biscuit sensory attributes, and biscuit samples showed that maltol contributed to the "caramel-like" aroma of adzuki bean-millet biscuits. Adzuki bean and millet flours have potential in the development of biscuits that meet flavor and nutritional requirements.

Formation of heterocyclic aromatic amines with the structure of aminoimidazoazarenes in food products

Thermal food processing has many beneficial consequences, although it also produces some unintentional undesired effects, such as the formation of potentially mutagenic and carcinogenic substances. Among them, the formation of heterocyclic aromatic amines (HAAs) has been related to the declared carcinogenicity of processed meats. In spite of this importance, HAA formation pathways remain mostly unknown, which avoids the design of targeted procedures to inhibit HAA appearance. The objective of this review is to collect information recently appeared that allow advancing in the understanding of how these compounds are produced. Particularly, the possibility that aminoimidazoazarenes are produced similarly to PhIP is discussed, including their formation by cyclizations and oligomerizations of aldehydes and creatinine under usual cooking conditions. Present data suggest that HAA formation might be related to the pool of carbonyl compounds existing in foods, the food carbonylome, which can be controlled by carbonyl-trapping agents, such as amine and phenolic compounds.

A Comprehensive Characterisation of Volatile and Fatty Acid Profiles of Legume Seeds

Legumes are rich in unsaturated fatty acids, which make them susceptible to (non) enzymatic oxidations leading to undesirable odour formation. This study aimed to characterise the volatile and fatty acid profiles of eleven types of legumes using headspace solid-phase microextraction gas chromatography-mass spectrometry (HS-SPME-GC-MS) and GC coupled with a flame ionisation detector (GC-FID), respectively. Volatile aldehydes, alcohols, ketones, esters, terpenes and hydrocarbons were the chemical groups identified across all the legumes. The lipids comprised palmitic, stearic, oleic, linoleic and α-linolenic acids, with unsaturated fatty acids comprising at least 66.1% to 85.3% of the total lipids for the legumes studied. Multivariate data analysis was used to compare volatile and fatty acid profiles between legumes, which allow discriminant compounds pertinent to specific legumes to be identified. Results showed that soybean, chickpea and lentil had distinct volatile and fatty acid profiles, with discriminating volatiles including lactone, ester and ketone, respectively. While all three Phaseolus cultivars shared similar volatile profiles, 3-methyl-1-butanol was found to be the only volatile differentiating them against the other eight legumes. Overall, this is the first time a multivariate data analysis has been used to characterise the volatile and fatty acid profiles across different legume seeds, while also identifying discriminating compounds specific for certain legume species. Such information can contribute to the creation of legume-based ingredients with specific volatile characteristics while reducing undesirable odours, or potentially inform relevant breeding programs.

Distribution and possible biosynthetic pathway of non-protein sulfur amino acids in legumes

Some grain legumes store sulfur in the form of non-protein amino acids in seed. γ-Glutamyl-S-methylcysteine is found in Phaseolus and several Vigna species. γ-Glutamyl-S-ethenylcysteine, an antinutritional compound, is present in Vicia narbonensis. In P. vulgaris, free S-methylcysteine levels are higher at early stages of seed development followed by a decline. γ-Glutamyl-S-methylcysteine accumulates later, in two phases, with a lag during reserve accumulation. The concentration of total S-methylcysteine, quantified after acid hydrolysis, is positively regulated by sulfate nutrition. The levels of both γ-glutamyl-S-methylcysteine and γ-glutamyl-S-ethenylcysteine are modulated in response to changes in seed protein composition. A model is proposed whereby the majority of γ-glutamyl-S-methylcysteine in P. vulgaris is synthesized via the intermediate S-methylhomoglutathione. Knowledge of the biosynthesis of non-protein sulfur amino acids is required for metabolic engineering approaches, in conjunction with manipulation of the protein sink, to increase the concentration of nutritionally essential methionine and cysteine. This would improve protein quality of some important legume crops.

Understanding the Relations Among the Storage, Soaking, and Cooking Behavior of Pulses: A Scientific Basis for Innovations in Sustainable Foods for the Future

The world faces challenges that require sustainable solutions: food and nutrition insecurity; replacement of animal-based protein sources; and increasing demand for convenient, nutritious, and health-beneficial foods; as well as functional ingredients. The irrefutable potential of pulses as future sustainable food systems is undermined by the hardening phenomenon that develops upon their storage under adverse conditions of temperature and relative humidity. Occurrence of this phenomenon indicates storage instability. In this review, the application of a material science approach, in particular the glass transition temperature concept, is presented to explain phenomena of storage instability such as the occurrence of hardening and loss of viability under adverse storage conditions. In addition to storage (in)stability, application of this concept during processing of pulses is discussed. The state-of-the-art on how hardening occurs, that is, mechanistic insights, is provided, including a critical evaluation of some of the existing postulations using recent research findings. Moreover, the influence of hardening on the properties and processing of pulses is included. Prevention of hardening and curative actions for pulses affected by the hardening phenomenon are described in addition to the current trends on uses of pulses and pulse-derived products. Based on the knowledge progress presented in this review, suggestions for the future include: first, the need for innovation toward implementation of recommended solutions for the prevention of hardening; second, the optimization of the identified most effective and efficient curative action against hardening; and third, areas to focus on for elucidation of mechanisms of hardening, although existing analytical methods require advancement.

Formation of phenylacetic acid and benzaldehyde by degradation of phenylalanine in the presence of lipid hydroperoxides: New routes in the amino acid degradation pathways initiated by lipid oxidation products

•

Degradation of phenylalanine into phenylacetic acid and benzaldehyde is described.

•

Amino acid degradation by lipid hydroperoxides takes place in two steps.

•

First step: phenylpyruvic acid and phenylacetaldehyde are formed by lipid carbonyls.

•

Second step: phenylpyruvic acid and phenylacetaldehyde are broken by lipid radicals.

•

Concerted action of both carbonyl-amine and free radical reactions is required.

Lipid oxidation is a main source of reactive carbonyls, and these compounds have been shown both to degrade amino acids by carbonyl-amine reactions and to produce important food flavors. However, reactive carbonyls are not the only products of the lipid oxidation pathway. Lipid oxidation also produces free radicals. Nevertheless, the contribution of these lipid radicals to the production of food flavors by degradation of amino acid derivatives is mostly unknown. In an attempt to investigate new routes of flavor formation, this study describes the degradation of phenylalanine, phenylpyruvic acid, phenylacetaldehyde, and β-phenylethylamine in the presence of the 13-hydroperoxide of linoleic acid, 4-oxononenal (a reactive carbonyl derived from this hydroperoxide), and the mixture of both of them. The obtained results show the formation of phenylacetic acid and benzaldehyde in these reactions as a consequence of the combined action of carbonyl-amine and free radical reactions for amino acid degradation.