Effects of crystallisation of native phytosterols and monoacylglycerols on foaming properties of whipped oleogels

Edible nonaqueous foams: Recent advances in the formation, stabilization, characterization, and applications

Edible nonaqueous foam has emerged as a novel direction for the development of fat-reducing products in recent years. This review critically summarizes the current progress of research on this foam mainly over the past decade. Initially, destabilization mechanisms that hinder its rational design are highlighted. Then, the preparation of nonaqueous foam is discussed, focusing on the types of stabilizers and foam properties. Additionally, the characterization methods of this foam and its applications are discussed. Finally, the gaps in the current research on edible nonaqueous foam and future perspectives are pointed out. Edible nonaqueous foam offers a novel avenue for developing fat replacers while preserving desirable sensory attributes. Moreover, this foam has demonstrated its potential in encapsulating flavor ingredients as well as developing responsive systems, thereby contributing to future advancements in personalized nutrition. This review has the potential to inspire innovative ideas for future research endeavors within the field of foam.

Surfactant-free W/O high internal phase emulsions co-stabilized by beeswax and phytosterol crystal scaffold: A promising fat mimetic with enhanced mechanical and mouthfeel properties

Water-in-oil high internal phase emulsions (W/O-HIPEs) typically rely on large amounts of surfactants to disperse water droplets and usually use crystalline saturated triacylglycerides (TAGs) to enhance processing properties. However, these practices conflict with consumer demands for 'natural' ingredients. This study seeks to develop novel crystal fractions similar to saturated TAGs for the preparation of W/O-HIPEs as low-calorie fat mimetics, focusing on their mechanical and mouthfeel properties, which have received little attention thus far. This study explored using an all-nature crystal scaffold to stabilize W/O-HIPEs as fat mimetics under surfactant-free conditions, featuring multi-sensorial attributes. The crystal scaffold was designed by varying the ratios (10:0, 8:2, 6:4, 4:6, 2:8, and 0:10, w/w) of beeswax (BW) and phytosterol (PS), two sustainable crystal fractions. The optimal stabilization of W/O-HIPEs (φ = 0.75) was achieved at a BW/PS ratio of 6:4, with only a slight increment in droplet size for either static storage (30 days) or freeze-thaw (3 cycles) treatment. Crystal particles of BW and PS performed a synergistic effect to stabilize W/O-HIPEs by forming a network in the bulk phase and adsorbing onto droplet surfaces as a Pickering stabilizer. The crystalline layer on the droplet surfaces also generated bridging networks, providing a dual stabilization mechanism for W/O-HIPEs. Incorporating 3.0 wt% of BW and PS (BW/PS = 6:4, w/w), W/O-HIPEs exhibited the required modulus of 1 × 105 Pa to mimic fat. Moreover, these W/O-HIPEs exhibited superior lubrication behavior (friction coefficients below 0.06) compared to pure liquid oil at low sliding speeds (0-2.5 mm/s), enhancing mouthfeel. However, increasing the BW and PS crystals content to 4.0 wt% led to increased brittleness, with a reduction in the emulsion's lubricity at the hydrodynamic region. These findings highlight the potential of natural crystals to develop low-calorie W/O-HIPEs as fat mimetics in the food industry.

Polyphenol improve the foaming properties of soybean isolate protein: Structural, physicochemical property changes and application in angel cake

With the increasing demand for food foaming, how to enhance the foaming properties of protein has gradually become the research focus. This work studied the effect of synephrine (SY) on foaming properties, structure properties, and physicochemical properties of soybean protein isolate (SPI). When the mass ratio of SY to SPI was 1:2, compared with SPI alone, the foam capacity and foam stability of the SY-SPI complex were significantly enhanced. Optical microscopy and confocal laser scanning microscope showed that the improvement in foaming performance was mainly due to the reduction of bubble size and uniform protein distribution. Circular dichroism spectrum and fluorescence spectra indicated that the hydrogen bond of SPI was destroyed and blue shifted with the addition of SY. What's more, the absolute value of Zeta potential, solubility, and hydrophobicity all increased, while the particle size decreased. As a result of molecular docking, surface hydrogen bonds, Van der Waals forces and hydrophobic interactions are the main driving forces. The addition of SY and SPI improved the specific volume and texture of angel cake. This study shows that SY has the potential to be developed into a new type of blowing agent.

Interfacial crystallized oleogel emulsion with improved freeze-thaw stability and tribological properties: Influence of cooling rate

In this study, the influence of cooling rate on the freeze-thaw stability, rheological and tribological properties of interfacial crystalized oleogel emulsion was investigated. Results showed that slower cooling rate could promote formation of larger crystals and stronger network in oleogels. Additionally, oleogel emulsions showed higher freeze-thaw stability than those stabilized solely by emulsifiers. The slower cooling rate resulted in larger crystals adsorbed at the droplet surface. This led to greater steric hindrance that prevented the migration of oil droplets with higher resistance to disruption by ice crystals. The rheological and tribological measurements suggested that with appropriate amount of crystals, the tribological properties were better maintained for emulsions prepared at slow cooling rate after freeze-thaw treatment. This strategy greatly enriched oleogel emulsion formulations and provided important clues for potential applications in food products involved with freeze-thaw treatment.

Bioactive foamulsion gels: a unique structure prepared with gellan gum and Acanthophyllum glandulosum extract

BACKGROUND

Foamulsions have become increasingly popular in the food industry due to their ability to enhance the textural, sensory and health-promoting properties of food products. This study was therefore aimed to design and prepare a novel gelled structure, foamulsion gel containing 0-600 g L-1 oil, with gellan gum (GG; 7, 10 and 13 g L-1) and saponin-rich antioxidant Acanthophyllum glandulosum extract (AGE; 2, 6 and 10 g L-1).

RESULTS

The interaction between components was confirmed by infrared spectroscopy. The overrun and porosity of the foamulsion gels increased with antioxidant AGE (1.30 times) and reduced with oil (up to ca 70% and 30%, respectively) and GG levels. The systems were highly stable, and no water or oil was released during the physical stability experiments. Microscopic images showed that the size of air cells was significantly larger than that of oil droplets. The foamulsion gels based on 13 g L-1 GG and 10 g L-1 AGE had markedly higher elastic (G') and viscous (G'') moduli than other samples, and exhibited an elastic and solid-like behavior (G' > G''). The highest gel firmness was found in oil-free sample, and the presence of oil resulted in a lower firmness induced by the larger size and lubrication effect of oil droplets.

CONCLUSION

As a result, the interactions between AGE, GG and oil could lead to the creation of new aerated structures known as bioactive foamulsion gels. These gels exhibit excellent foamability, stability and viscoelasticity and may find applications in the development of novel, healthy and low-calorie aerated foods. © 2024 Society of Chemical Industry.

Producing superior oleofoams: Unraveling the impact of oil type, surfactant concentration, and production temperature on foam stability and functional characteristics

This study explores the impact of oil type, surfactant concentration, and production temperature on oleofoam properties. Oleofoams were prepared using different concentrations (5, 8, and 10 % w/w) of monoglyceride (MG) in olive, soybean, and sunflower oils at temperatures of 25 °C and 5 °C. The results indicate that higher surfactant concentrations and lower production temperatures enhance the stability, foamability, melting behavior, and hardness of the oleofoams, while minimizing oil drainage. Microscopic analysis reveals that lower production temperatures result in smaller bubble sizes in all oil blends which reduces oil loss and increases the hardness of the oleofoam. Also, oleofoams derived from different oils exhibit solid-like behavior. Among the oils studied, the oleofoam prepared with sunflower oil, at a concentration of 10 % MG and a production temperature of 5 °C, demonstrates superior properties. These findings provide valuable insights into optimizing oleofoam properties by controlling the oil type, surfactant concentration, and production temperature.

Characterization of acorn oil and its application on carnauba wax-based oleogel and chocolate spread

This study aimed to characterize acorn oil (AO) and carnauba wax-based acorn oil oleogel (AOG) and the effect of AOG replacement on the textural and sensorial properties of chocolate spread. Oil yields from cold-pressing (Quercus longipes) were around 14%wt with a nice nutty smell. The main fatty acids of AO were included oleic, linoleic, and palmitic acid (44, 38, and 10%wt) respectively. The prepared AOG using 6%wt of carnauba wax (CW) showed high strength (G' > 100 mPa) and oil binding capacity ∼87 %. Based on microstructure assays platelet-like and β' polymorphic triglyceride crystalline networks were formed in AOG. The Pickering AOG/water emulsions in the volumetric ratio of from 90:10 up to 40:60 were stable due to the placement of CW-based AOG particles at the interface of water/oil as Pickering stabilizer. The high physical stability of the emulgel against phase separation is considered an important advantage for using oleogel in chocolate spread formulations instead of vegetable oils, which usually have a high percentage of oil release. The spreads prepared by replacing 50%wt AOG with butter showed acceptable textural and sensorial properties.

Unusual Structural Insights Revealed by Rheo-SAXS Studies of Nonaqueous Crystalline Gels

Glycerol is a nonaqueous polar solvent and is of interest in many industrial areas due to its beneficial properties, such as green production and biocompatibility. Our previous works have shown the presence of a fibrillar phase on the microscale that consists of lamellar sodium dodecyl sulfate (SDS) crystals containing interstitial glycerol on the nanoscale. The phase is gel-like at room temperature and demonstrates shear-thinning behavior upon application of a shear. Initially, small-angle X-ray scattering coupled with rheology (rheo-SAXS) measurements were performed to elucidate the structural transition of the gel phase under an applied shear, but it became clear that the aging process of the gel has a profound impact on both the gel nanostructure and also the mechanical properties. For younger gels, both the dissolution of SDS crystallites and the alignment of the fibrillar phase were seen. However, in the aged gels, an unexpected foam was formed at shear rates γ ˙ > 700 s-1. The microscopic structure of the foam phase was imaged using polarizing light microscopy and brightfield and darkfield optical microscopy. The nanostructure of the foam phase was investigated using rheo-SAXS. The foam phase was shown to be stabilized by the presence of SDS crystallites at the air-liquid interface, and the stability of the foam is high with foam persisting even t = 3 months after formation. These results highlight the importance of investigating green nonaqueous media and the gel aging process, both of which are interesting not only on a fundamental level but also for a range of industrial applications, from personal care products and cosmetics to food science.

Effects of different oleogelators on the structural properties and composition of iron walnut-oil oleogels

In this study, we compared the quality of iron walnut oil (IWO) oleogels prepared with different oleogelators, including γ-oryzanol/β-sitosterol (OZ-PS), γ-oryzanol/triglyceride (OZ-TC), monoglycerides (MGS), beeswax (BW), beeswax-monoglycerides (BW-MGS), and carnauba wax (CW). The physicochemical and component properties, rheological and textural parameters, macroscopic morphologies, and antioxidant capacities of the resulting oleogels were analyzed. In addition, their microscopic properties were analyzed using Fourier-transform infrared (FTIR), X-ray powder diffraction (XRD) spectroscopy, and polarized light microscopy (PLM). The results showed that the gel structures produced by different oleogelators did not change the fatty acid composition of IWO. In addition, the IWO oleogel prepared with OZ-PS had a more stable network structure, excellent hardness at 4℃ (1116.51 g), better antioxidant capacity (766.50 μmol TE/kg) and higher total phenolic content (14.98 mg/kg) than any other experimental IWO oleogels. Moreover, comprehensive ranking by principal component analysis of numerous characteristics showed that the OZ-PS oleogel (2.533) ranked first among the six oleogels studied. Therefore, the IWO oleogel prepared with OZ-PS is a promising product, and our results provide guidance for the preparation of IWO oleogels, such as to increase their applications in the food industry.

Oleo-foams and emulsion-foams as lipid-based foam systems: a review of their formulation, characterization, and applications

Lipid-based foam systems (LBFs) have grown in popularity recently because of their effectiveness and potential uses. As a result, in order to stabilize them, considerable work has been put into developing more biodegradable and environmentally friendly materials. However, the use of natural stabilizing agents has been constrained due to a lack of thorough knowledge of them. This review offers insightful data that will encourage more studies into the development and use of LBFs. Emulsifiers or gelling agents, as well as new preparation and characterization methods, can be used to increase or prolong the functional performance of LBFs. Special emphasis has been given on the connections between their structures and properties and expanding the range of industries in which they can be applied. In conclusion, it is crucial to gain a deeper understanding of the preparation mechanisms and influencing factors in order to improve the quality of foam products and create novel LBFs.

Oleofoams stabilized by monoacylglycerides: Impact of chain length and concentration

Oleofoams are plant oil based whipped systems which have drawn academic and industry attention in recent years. The aim of this study was to determine the effect of fatty acid chain length and monoacylglyceride (MAG) concentration on the performance and structural properties of MAG-based oleofoams. Four different MAGs (monolaurin, monomyrystin, monopalmitin, and monostearin) were studied at three concentration levels (5, 10, and 15 wt%). The fatty acid chain length had a statistically significant impact on the size and shape of crystals formed, while higher MAG concentrations led to higher numbers of crystals in the continuous oil phase. These differences affected the performance and physical properties of the oleofoams: compared to other MAGs, monostearin based oleofoams were harder and exhibited higher values of G' and G″, had higher overrun and showed better stability. Lastly, through microscopy techniques it was successfully proved that monostearin-based oleofoams are stabilized by both bulk and Pickering stabilization.

A novel approach for the development of edible oleofoams using double network oleogelation systems

Whipped oleogels (oleofoams) are commonly stabilized by crystalline particles. Still, external factors like temperature fluctuations could change the state of the crystals (phase transitions), leading to the destabilization and disruption of oleofoams. Herein, a double network oleogelation system comprised of a primary crystalline network (using glycerol monostearate) and a secondary colloidal network (stabilized by soy protein isolate-anionic polysaccharides Mailard conjugates) is proposed as a novel strategy to overcome these challenges. It was observed that the incorporation of the secondary network resulted in a lower over-run, but a higher melting point, elasticity, foam stability, and more uniform bubble size distribution. This was explained by the strong interfacial stabilization provided by the colloidal network that can protect the crystalline particle against coarsening and oil drainage. These double network oleofoams, which could retain 41-48 % air (oleogel-based), display great potential for utilization in low-calorie lipid-based products.

Thermal-reversible lacquer wax-based oleofoams in dual stabilization with high ambient stability

In this study, the effect of the content of the lacquer wax and whipping time on the overrun was explored. It was found that an appropriate amount of wax content and whipping time could promote crystal dual stabilization through the Pickering mechanism and the close packing in the bulk phase. Otherwise, it would result in low overrun caused by high viscous and crystal bridging. The addition of polyglycerol polyricinoleate (PGPR) could effectively enhance the overrun by apace absorbing. At the same time, adding PGPR also improved the contact angle, which was beneficial to the adsorption at the A-O interface. The 8 wt% oleogel was partially substituted by high-melting fat palm stearin (POs) and oleofoams were prepared based on blended fat. POs increased the melting point, structural strength, and β'-form crystal of oleofoams, thus improving the storage and temperature stability. The oleofoam has a maximum overrun of 189% and could maintain the shape of the decorating over 15 d at the ambient temperature, showing great potential in low-fat food applications and other delivery systems.

Differential Scanning Calorimetry Material Studies: Benzil Melting Point Method for Eliminating the Thermal History of DSC

How to eliminate the thermal history present in differential scanning calorimetry, this question has been widely concerned. Benzil has a serious thermal history that is not well eliminated by conventional thermal history methods. Herein, using benzil as a target, we developed a freeze-gradient temperature rate heating up method to eliminate the thermal history of DSC. Compared with the conventional method, this method avoids the introduction of new thermal histories by new crystalline forms that may appear during the cooling crystallization process. The results show that the peak shape of the melting peak is sharper and the peak emergence position is closer to the theoretical melting point after the elimination of the thermal history by the freeze-gradient heating up method. Based on this method, we optimized other factors to establish a complete method for the determination of melting point by DSC, analyzed the uncertainty of the method, and obtained an extended uncertainty of 0.19°C for DSC in this method. The validation results show that the p-nitrotoluene of the melting point reference substance was 52.64°C, which is within its reference value of (52.53 ± 0.20) °C, showing that this method is reliable. This study provides a reference for other thermal analysis methods to eliminate thermal history.

Conversion of Pulse Protein Foam-Templated Oleogels into Oleofoams for Improved Baking Application

The food industry has long been searching for an efficient replacement for saturated-fatty-acid-rich fats for baking applications. Although oleogels have been considered a potential alternative for saturated and trans fats, their success in food application has been poor. The present study explored the use of oleofoams obtained by whipping the pulse protein foam-templated oleogels for cake baking. Oleogels were prepared at room temperature by adding canola oil containing high-melting monoglyceride (MAG) or candelilla wax (CW) to the freeze-dried pea or faba bean protein-stabilized foams. Oleogels were then whipped to create the oleofoams; however, only the oleogels containing MAG could form oleofoams. CW-oleogel could not form any oleofoam. The most stable oleofoams with the highest overrun, stability, and storage modulus were obtained from 3% MAG+pulse protein foam-templated oleogels. The MAG plus protein foam-templated oleogels showed smaller and more packed air bubbles than MAG-only oleofoam, which was ascribed to the protein's ability to stabilize air bubbles and provide a network in the continuous oil phase to restrict air bubble movement. A novel batter preparation method for oleofoam was developed to increase air bubble incorporation. The X-ray microtomography images of the cakes showed a non-homogeneous distribution of larger air bubbles in the oleofoam cake compared to the shortening cake although their total porosity was not much different. The oleofoam cakes made with the new method yielded similar hardness and chewiness compared to the shortening cakes. By improving rheology and increasing air incorporation in the batter, high-quality cakes can be obtained with MAG-containing oleofoams made from pulse protein foam-templated oleogels.

Stabilisation of oleofoams by lauric acid and its glycerol esters

Four types of pure lipid, namely lauric acid (LA), glycerol monolaurate (MAG), diglycerol laurate (DAG) and triglyceride laurate (TAG) were used to prepare oleofoams. The relationship between crystal profiles and their performance in oleofoams was established. DAG formed small needle-like crystals while MAG formed large flake-like crystals in oleogels, and crystal shells around air bubbles were observed in LA-, MAG- and DAG-based oleofoams. LA and DAG displayed higher over-run whereas DAG-stabilised foam possessed smaller bubbles and higher physical stability due to the presence of small β and β' crystals. Upon heating, DAG and TAG-based foams showed varying extents of oil drainage indicating the crystals were distributed in a different manner. Therefore, DAG was shown to be an excellent gelator in the fabrication of ultra-stable oleofoams. This work extends the lipid varieties with nutritional features and allows a better understanding on the stabilization mechanisms of lauric acid lipids in oleofoams.

Double network oleogels co-stabilized by hydroxypropyl methylcellulose and monoglyceride crystals: Baking applications

Edible double network oleogels were prepared by hydroxypropyl methylcellulose (HPMC) and glyceryl monostearate (GMS) by the cryogel-templated method. Hot GMS soybean oil solutions were absorbed by HPMC cryogels, which were further homogenized and cooled to form oleogels containing both the HPMC network and GMS network. The crystal network constructed by GMS crystal clusters significantly enhanced the mechanical and rheological attributes of oleogels. Both the HPMC network and the GMS network were built up due to hydrogen bonds. According to the normalization analysis of FTIR and the deepening of the shift of the absorption peak, hydrogen bonds could also be formed between HPMC and GMS to connect the two independent networks. Double network oleogels were further used to fabricate cookies and cakes, assessed by the texture profile analysis. The combination of the HPMC network and GMS network in preparing oleogels will promote the application of oleogels as the fat replacer.

Application of X-ray Microcomputed Tomography for the Static and Dynamic Characterization of the Microstructure of Oleofoams

Oleofoams are a novel, versatile, and biocompatible soft material that finds application in drug, cosmetic or nutraceuticals delivery. However, due to their temperature-sensitive and opaque nature, the characterization of oleofoams' microstructure is challenging. Here, synchrotron X-ray microcomputed tomography and radiography are applied to study the microstructure of a triglyceride-based oleofoam. These techniques enable non-destructive, quantitative, 3D measurements of native samples to determine the thermodynamic and kinetic behavior of oleofoams at different stages of their life cycle. During processing, a constant bubble size distribution is reached after few minutes of shearing, while the number of bubbles incorporated keeps increasing until saturation of the continuous phase. Low amounts of solid triglycerides in oleofoams allow faster aeration and a more homogeneous microstructure but lower thermodynamic stability, with bubble disproportionation and shape relaxation over time. Radiography shows that heating causes Ostwald ripening and coalescence of bubbles, with an increase of their diameter and sphericity.

A novel strategy to fabricate stable oil foams with sucrose ester surfactant

HYPOTHESIS

Can a mixture of sucrose ester surfactant in vegetable oil be aerated to yield stable oleofoams? Is foaming achievable from one-phase molecular solutions and/or two-phase crystal dispersions? Does cooling a foam after formation induce surfactant crystallisation and enhance foam stability?

EXPERIMENTS

Concentrating on extra virgin olive oil, we first study the effect of aeration temperature and surfactant concentration on foamability and foam stability of mixtures cooled from a one-phase oil solution. Based on this, we introduce a strategy to increase foam stability by rapidly cooling foam prepared at high temperature which induces surfactant crystallisation in situ. Differential scanning calorimetry, X-ray diffraction, infra-red spectroscopy, surface tension and rheology are used to elucidate the mechanisms.

FINDINGS

Unlike previous reports, both foamability and foam stability decrease upon decreasing the aeration temperature into the two-phase region containing surfactant crystals. At high temperature in the one-phase region, substantial foaming is achieved (over-run 170%) within minutes of whipping but foams ultimately collapse within a week. We show that surfactant molecules are surface-active at high temperature and that hydrogen bonds form between surfactant and oil molecules. Cooling these foams substantially increases foam stability due to both interfacial and bulk surfactant crystallisation. The generic nature of our findings is demonstrated for a range of vegetable oil foams with a maximum over-run of 330% and the absence of drainage, coalescence and disproportionation being achievable.

Application of Analytical Methods for the Comprehensive Analysis of Oleogels-A Review

Numerous empirical studies have already been conducted on the innovative fat-replacing system defined as oleogel, creating a real urge for setting up a framework for future research, rather than conducting studies with arbitrary methods. This study re-evaluates the utility of some analyses and states some conclusions in order to eliminate the reluctance of food processors and consumers towards the utilization of oleogels as ingredients. The review presents extensively the methods applied for the characterization of various oleogels, while highlighting their addressability or inconveniences. The discussed methods were documented from the research published in the last five years. A classification of the methods is proposed based on their aims or the utility of the results, which either describe the nano-structure and the network formation, the quality of the resulting oleogel or its suitability as food ingredient or other edible purposes. The general conclusions drawn for some classes of oleogels were also revisited, in order to ease the understanding of the oleogel behaviour, to encourage innovative research approaches and to stimulate the progress in the state of art of knowledge.

Particle-stabilized oil foams

The area of oil foams although important industrially has received little academic attention until the last decade. The early work using molecular surfactants for stabilisation was limited and as such it is difficult to obtain general rules of thumb. Recently however, interest has grown in the area partly fuelled by the understanding gained in the general area of colloidal particles at fluid interfaces. We review the use of solid particles as foaming agents for oil foams in cases where particles (inorganic or polymer) are prepared ex situ and in cases where crystals of surfactant or fat are prepared in situ. There is considerable activity in the latter area which is particularly relevant to the food industry. Discussion of crude oil/lubricating oil foams is excluded from this review.

Oleogels-Their Applicability and Methods of Characterization

Oleogels or, more precisely, non-triglyceride structured lipid phases have been researched excessively in the last decade. Yet, no comprehensive knowledge base has emerged, allowing technology elevation from the laboratory bench into the industrial food application. That is partly due to insufficient characterization of the structuring systems studied. Examining a single composition decided upon by arbitrary methods does not stimulate progress in the research and technology area. A framework that gives much better guidance to product applications can easily be derived. For example, the incremental structure contribution concept is advocated as a parameter to compare the potency of structuring systems. These can straightforwardly be determined by combining solubility data and structural measurements in the recommended manner. The current method to determine the oil-binding capacity suffers from reproducibility and relevance. A newly developed method is suggested to overcome these shortcomings. The recommended new characterization of oleogels should contribute to a more comprehensive knowledge base necessary for product innovations.

Analysis of the effect of recent reformulation strategies on the crystallization behaviour of cocoa butter and the structural properties of chocolate

Chocolate is a complex soft material characterized by solid particles (cocoa powder, milk solid particles and sugar crystals) dispersed in a crystallized fat matrix mostly composed of cocoa butter (CB). Important chocolate properties such as snap, and visual appearance are strongly dependent on the internal molecular arrangement (polymorph), size and shape, as well as the spatial distribution of CB crystals within the chocolate mix. In recent years confectionary companies have put increasing effort in developing novel chocolate recipes to improve the nutritional profile of chocolate products (e.g., by reducing the amount of high saturated fat and sugar content) and to counteract the increasing price of cocoa butter as well as sustainability issues related to some chocolate ingredients. Different reformulation strategies can dramatically affect the crystallization thermodynamic and kinetic behaviour of cocoa butter; therefore, affecting the structural and sensorial properties of chocolate. In this review we analyse how different reformulation strategies affect the crystallization behaviour of cocoa butter and, hence, the structural and sensorial properties of chocolate. In particular, this work discusses the effect of: (1) CB replacement with emulsions, hydrogels, oleogels and oleofoams; (2) CB dilution with limonene or cocoa butter equivalents; (3) replacement or reduction of the amount of sugar and milk in chocolate. We found that there is certainly potential for successful novel alternative chocolate products with controlled crystalline properties; however, further research is still needed to ensure sensory acceptance and reasonable shelf-life of these novel products.

Fabrication and characterization of stable oleofoam based on medium-long chain diacylglycerol and β-sitosterol

Oleofoams have emerged as attractive low-calorie aeration systems, but saturated lipids or large amount of surfactants are commonly required. Herein, an innovative strategy was proposed to create oleofoams using medium-long chain diacylglycerol (MLCD) and β-sitosterol (St). The oleofoams prepared using MLCD and St in ratios of 15:5 and 12:8 exhibited smaller bubble size and much higher stability. MLCD crystals formed rigid Pickering shell, whereby air bubbles acted as "active fillers" leading to enhanced rigidity. Both Pickering and network stabilization for the MLCD-St oleofoam provided a steric hindrance against coalescence. The gelators interacted via hydrogen bonding, causing a condensing effect in improving the gel elasticity. The oleofoams and foam-based emulsions exhibited a favorable capacity in controlling volatile release where the maximum headspace concentrations and partition coefficients showed a significantly decrease. Overall, the oleofoams have shown great potential for development of low-calorie foods and delivery systems with enhanced textural and nutritional features.

Hybrid oil-in-water emulsions applying wax(lecithin)-based structured oils: Tailoring interface properties

This study addressed the impact of fruit wax(lecithin)-based oleogels as dispersed phase in formation and stability of oil-in-water emulsions. These hybrid emulsions were prepared above the melting point of the oleogels, using Tween 80 (T80) or whey protein isolate (WPI) as emulsifiers. Both mono- and mixed-component oleogels comprised of fruit wax (FW) or FW + lecithin (FWLEC), respectively, were studied as lipid phases. After hot-homogenization, emulsions were submitted to quiescent cooling and stored over 14 days at 5 or 25 °C, in such temperatures supposed to assist or hinder oleogelation, respectively. Time course promoted a slight decrease in zeta potential only for WPI-stabilized emulsions and particle size distribution was shifted to larger size values, but showing a lesser extent to those stored at 5 °C. The presence of oleogels improved kinetic stability of emulsions compared to liquid oil at both temperatures, disclosing the role of the combined effects of the type of emulsifier and oleogelator(s)-emulsifier interactions. These outcomes are associated with the interfacial activity played by both oleogelators, but mainly lecithin that led to lower values of interfacial tension. In addition FWLEC combined with WPI showed the lowest complex modulus from dilational rheology, which can be related with WPI-LEC complex formation. Overall, results suggest that oleogelators migrated to the O/W interface of dispersed droplets, no longer reflecting oleogel bulk properties and showing a more complex behavior. However, the formation of more complex structures at the interface favored greater stability of the emulsions. Thus, the new perspective of oleogel-inspired fat droplets in hybrid systems can expand the conventional approach of oil structuring to create mixed interfaces tailoring oil-in-water emulsions properties.

Physical properties and cookie-making performance of oleogels prepared with crude and refined soybean oil: a comparative study

The objective of this research was to fabricate crude soybean oil oleogels (CSO) using β-sitosterol (BS) and/or monoacylglycerol (MAG) and compare their role with that of refined soybean oil oleogels (RSO) in cookie making. Both crude and refined soybean oil oleogels were formed with BS or MAG, or the combination of both (1 : 1) at a fixed concentration of 10 wt%. The thermal behavior of the oleogels was measured using differential scanning calorimetry (DSC). The crystal structure and morphology of the oleogels were characterized using X-ray diffraction (XRD) and polarized light microscopy (PLM). The hardness of the oleogel and commercial vegetable shortening was compared using a texture analyzer. The characteristics of cookies made with the oleogels were compared with those of cookies made with commercial vegetable shortening. Overall, the incorporation of BS and/or MAG into crude and refined soybean oil can produce oleogels with solid-like properties. Refined soybean oil formed stronger and firmer oleogels as compared to crude soybean oil. RSO structured by BS presented branched fiber-like, elongated plate-like, and needle-like crystals while the same oil gelled by MAG contained spherulite crystals. RSO made with the combination of BS and MAG displayed crystal morphologies from both BS and MAG. The same crystal morphologies were observed in CSO with lower quantities. Comparing the quality of cookies made with the oleogels and commercial vegetable shortening, equal or better performance of both RSO and CSO in terms of weight, thickness, width, spread ratio, and hardness of cookies than that of commercial vegetable shortening was observed. By combining the results of the physical characterization and cookie making performance, it can be concluded that both crude and refined soybean oleogels could resemble commercial shortening, which offers the possibility of using oleogels to replace shortening in the baking industry.

Synthesis, physicochemical properties, and health aspects of structured lipids: A review

Structured lipids (SLs) refer to a new type of functional lipids obtained by chemically, enzymatically, or genetically modifying the composition and/or distribution of fatty acids in the glycerol backbone. Due to the unique physicochemical characteristics and health benefits of SLs (for example, calorie reduction, immune function improvement, and reduction in serum triacylglycerols), there is increasing interest in the research and application of novel SLs in the food industry. The chemical structures and molecular architectures of SLs define mainly their physicochemical properties and nutritional values, which are also affected by the processing conditions. In this regard, this holistic review provides coverage of the latest developments and applications of SLs in terms of synthesis strategies, physicochemical properties, health aspects, and potential food applications. Enzymatic synthesis of SLs particularly with immobilized lipases is presented with a short introduction to the genetic engineering approach. Some physical features such as solid fat content, crystallization and melting behavior, rheology and interfacial properties, as well as oxidative stability are discussed as influenced by chemical structures and processing conditions. Health-related considerations of SLs including their metabolic characteristics, biopolymer-based lipid digestion modulation, and oleogelation of liquid oils are also explored. Finally, potential food applications of SLs are shortly introduced. Major challenges and future trends in the industrial production of SLs, physicochemical properties, and digestion behavior of SLs in complex food systems, as well as further exploration of SL-based oleogels and their food application are also discussed.