Determination of volatile compounds and their sensory impact in a biopolymer based on polylactic acid (PLA) and polyester

Diffusion Coefficients and Activation Energies of Diffusion of Organic Molecules in Poly(lactic acid) Films

Poly(lactic acid) (PLA) is one of the most important bio-based and industrial compostable materials in food packaging. Its barrier properties towards oxygen and moisture are well documented. However, data on barrier properties of PLA towards organic molecules are scarce in the literature. This study investigated the diffusion of various organic molecules, including n-alkanes, 1-alcohols, 2-ketones, ethers, esters, amines, and aromatics, in two commercial PLA films with thicknesses of 20 µm and 30 µm. The diffusion coefficient (DP) values were determined from lag time in permeation tests conducted at temperatures ranging from 20 °C to 90 °C. The films were also characterized in terms of crystallinity, rigid and mobile amorphous fractions, and molecular weight. Activation energies (EA) were calculated based on the temperature dependence of the DP using the Arrhenius approach. In total, 290 DP values for 55 individual substances were determined, and 38 EA values were derived from these data. The EA correlated well with the molecular volume of the investigated substances. Moreover, the pre-exponential factor D0 showed a correlation with EA. These correlations enabled the establishment of diffusion modeling parameters for PLA, allowing the prediction of DP for untested substances. The diffusion behavior of PLA was further compared with the literature data for polyethylene terephthalate and polyethylene naphthalate, providing insights into the relative performance of these materials.

Nanoarchitectonics of Sustainable Food Packaging: Materials, Methods, and Environmental Factors

Nanoarchitectonics influences the properties of objects at micro- and even macro-scales, aiming to develop better structures for protection of product. Although its applications were analyzed in different areas, nanoarchitectonics of food packaging-the focus of this review-has not been discussed, to the best of our knowledge. The (A) structural and (B) functional hierarchy of food packaging is discussed here for the enhancement of protection, extending shelf-life, and preserving the nutritional quality of diverse products including meat, fish, dairy, fruits, vegetables, gelled items, and beverages. Interestingly, the structure and design of packaging for these diverse products often possess similar principles and methods including active packaging, gas permeation control, sensor incorporation, UV/pulsed light processing, and thermal/plasma treatment. Here, nanoarchitechtonics serves as the unifying component, enabling protection against oxidation, light, microbial contamination, temperature, and mechanical actions. Finally, materials are an essential consideration in food packaging, particularly beyond commonly used polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), polystyrene (PS), and polyvinyl chloride (PVC) plastics, with emphasis on biodegradable (polybutylene succinate (PBS), polyvinyl alcohol (PVA), polycaprolactone (PCL), and polybutylene adipate co-terephthalate (PBAT)) as well as green even edible (bio)-materials: polysaccharides (starch, cellulose, pectin, gum, zein, alginate, agar, galactan, ulvan, galactomannan, laccase, chitin, chitosan, hyaluronic acid, etc.). Nanoarchitechnotics design of these materials eventually determines the level of food protection as well as the sustainability of the processes. Marketing, safety, sustainability, and ethics are also discussed in the context of industrial viability and consumer satisfaction.

Chemical safety and risk assessment of bio-based and/or biodegradable polymers for food contact: A review

Bio-based and/or biodegradable polymers are being developed and applied as a sustainable and innovative alternative to conventional petroleum-based materials for food packaging applications. From the chemical standpoint, bio-based and/or biodegradable polymers present a complex chemical composition that includes additives, monomers, and other starting substances, but also, oligomers, impurities, degradation products, etc. All these compounds may migrate into the food and can be a hazard to the consumers' health. Thus, identifying potential migrants is crucial to assess the safety of these materials. The analytical methods applied to investigate migrants in bio-based and/or biodegradable polymers are reviewed and commented on. Mostly, gas chromatography or liquid chromatography coupled to mass spectrometry and specifically high-resolution mass spectrometry are the techniques of choice. In addition, a summary of recently published migration studies of chemicals from bio-based and/or biodegradable polymers into food simulants and food is provided. Moreover, current approaches to risk assessment of packaging materials are presented and illustrated with examples. Therefore, this review aims to highlight the chemical safety issues raised by biopolymers for food contact applications, that are often overlooked.

Deciphering the complexity of the chemicals in food packaging materials using molecular networks

Chemicals from packaging materials might be transferred into food resulting in consumer exposure. Identifying these migrated chemicals is highly challenging and crucial to perform their safety assessment, usually starting by the understanding of the chemical composition of the packaging material itself. This study explores the use of the Molecular Networking (MN) approach to support identification of the extracted chemicals. Two formulations of bioplastics were analyzed using Liquid Chromatography hyphenated to High-Resolution Mass Spectrometry. Data processing and interpretation using a conventional manual method was performed as a point of comparison to understand the power of MN. Interestingly, only the MN approach facilitated the identification of unknown chemicals belonging to a novel oligomer series containing the azelaic acid monomer. The MN approach provided a faster visualization of chemical families in addition to the highlight of unrelated chemicals enabling to prioritize chemicals for further investigation improving the safety assessment of packaging materials.

Comprehensive study of retention influencing gas chromatographic parameters affecting linear retention indices

Retention in gas chromatographic systems has a central role in the identification of compounds even if detectors providing spectral information are used. But linear retention indices (LRI) of a single compound originating from multiple sources tend to vary greatly, probably due to differences in the experimental settings of the determinations. The effect of gas chromatographic parameters on LRI has been investigated using 41 compounds - previously identified from food contact plastics - and n-alkanes (n-C7-n-C40) used as reference series. As the reproducibility of LRIs under the same conditions is generally very good, the smallest changes in the settings often caused statistically significant, though irrelevant changes in the LRI values. Therefore, a multicriterial scoring-ranking system has been worked out to highlight the LRI value differences. Our results highlight that column length, heating rate, and film thickness can all be the reasons of the varying published LRI values. We also demonstrated that for the reproduction of LRI data, the chemistry (and not simply the polarity) of the stationary phase is crucial.

Characterization, hazard identification, and risk assessment of volatile organic compounds in Poly(butylene adipate-co-terephthalate)-based food contact articles

The chemical safety of poly (butylene adipate-co-terephthalate) (PBAT) based food contact articles (FCAs) has aroused increasing toxicological concerns in recent years, but the chemical characterization and associated risk assessment still remain inadequate as it fails to elucidate the distribution pattern and discern the potential genotoxic and carcinogenic hazards of the identified substances. Herein, the volatile organic compounds (VOCs) in 50 batches of PBAT-based FCAs of representative categories and 10 batches of PLA and PBAT pellets were characterized, by which 237 VOCs of 10 chemical categories were identified and exhibited characteristic distribution patterns in the chemical spaces derived from their molecular descriptors. Chemical hazards associated with the identified VOCs were discerned by a hazard-driven classification scheme integrating hazard-related knowledge from multiple publicly available sources, and 34 VOCs were found to bear genotoxic or carcinogenic hazards and to feature higher average molecular weight than the other VOCs. Finally, the Risk and hazard quotient (HQ) calculated as the metrics of risk suggested that all identified VOCs posed acceptable risks (Risk<10-4 or HQ < 1), whereas oxolane, butyrolactone, N,N-dimethylacetamide, 2-butoxyethanol, benzyl alcohol, and 1,2,3-trichloropropane posed non-negligible (Risk>10-6) genotoxic or carcinogenic risk and thus should be of prioritized concern to promote the chemical safety of PBAT-based FCAs.

Mass spectral characterisation of cyclic oligoesters in a biodegradable mulch film

RATIONALE

Plastic mulch film manages weed growth and moisture loss on the surface of cropping beds. The chemical components of such plastics include polymer(s), additives and non-intentionally added substances (NIASs). The unknown chemical nature and behaviours of these constituents require investigation due to their potential to add to the anthropogenic chemical burden in the agrifood system.

METHODS

Solvent extracts of a commercial 15% polylactic acid (PLA)/85% poly(butylene adipate-co-terephthalate) mulch film were investigated using gas chromatography-mass spectrometry (GC-MS) with electron ionisation to characterise the additive and NIAS components. The obscurity of some of the NIASs meant their identification was not readily achieved through routine MS library comparisons. As such, the identification of several polymer-derived compounds required interpretation of the MS data and re-application of the derived fragmentation patterns with reference to the wider literature. Unknowns were confirmed using commercially available compounds.

RESULTS

Unknown NIASs were identified as cyclic oligoesters comprised of the monomeric building blocks of the polymer system. Cyclic structures derived from the monomers of polybutylene adipate (PBA) and polybutylene terephthalate (PBT) fragmented through a primary pathway involving 1,5- and 1,3-H transfers at ester linkages. Characteristic ions at m/z 111, 129, 183 and 201 for PBA-derived cyclic oligoesters and m/z 104, 132, 149 and 221 for PBT-derived cyclic oligoesters were assigned in the mass spectra of unknowns. Cyclic oligoesters containing sebacate moieties were also identified, indicating the presence of polybutylene sebacate as an unexpected component of the mulch.

CONCLUSIONS

Systematic analyses of the sort reported here are valuable for providing alternative approaches for the identification of plastic-related chemicals. Open publication of MS spectral data is required to build a greater understanding of the mulch film chemical components contributing to the environmental chemical load introduced to agroecosystems.

Enhancing Odor Analysis with Gas Chromatography-Olfactometry (GC-O): Recent Breakthroughs and Challenges

Gas chromatography-olfactometry (GC-O) has made significant advancements in recent years, with breakthroughs in its applications and the identification of its limitations. This technology is widely used for analyzing complex odor patterns. The review begins by explaining the principles of GC-O, including sample preparation, separation methods, and olfactory evaluation techniques. It then explores the diverse range of applications where GC-O has found success, such as food and beverage industries, environmental monitoring, perfume and aroma development, and forensic analysis. One of the major breakthroughs in GC-O analysis is the improvement in separation power and resolution of odorants. Techniques like rapid GC, comprehensive two-dimensional GC, and multidimensional GC have enhanced the identification and quantification of odor-active chemicals. However, GC-O also has limitations. These include the challenges in detecting and quantifying trace odorants, dealing with matrix effects, and ensuring the repeatability and consistency of results across laboratories. The review examines these limitations closely and discusses potential solutions and future directions for improvement in GC-O analysis. Overall, this review presents a comprehensive overview of the recent advances in GC-O, covering breakthroughs, applications, and limitations. It aims to promote the wider usage of GC-O analysis in odor analysis and related industries. Researchers, practitioners, and anyone interested in leveraging the capabilities of GC-O in analyzing complex odor patterns will find this review a valuable resource. The article highlights the potential of GC-O and encourages further research and development in the field.

Potential safety concerns of volatile constituents released from coffee-ground-blended single-use biodegradable drinking straws: A chemical space perspective

Incorporating spent coffee grounds into single-use drinking straws for enhanced biodegradability also raises safety concerns due to increased chemical complexity. Here, volatile organic compounds (VOCs) present in coffee ground straws (CGS), polylactic acid straws (PLAS), and polypropylene straws (PPS) were characterized using headspace - solid-phase microextraction and migration assays, by which 430 and 153 VOCs of 10 chemical categories were identified by gas chromatography - mass spectrometry, respectively. Further, the VOCs were assessed for potential genetic toxicity by quantitative structure-activity relationship profiling and estimated daily intake (EDI) calculation, revealing that the VOCs identified in the CGS generally triggered the most structural alerts of genetic toxicity, and the EDIs of 37.9% of which exceeded the threshold of 0.15 μg person-1 d-1, also outnumbering that of the PLAS and PPS. Finally, 14 VOCs were prioritized due to their definite hazards, and generally higher EDIs or detection frequencies in the CGS. Meanwhile, the probability of producing safer CGS was also illustrated. Moreover, it was uncovered by chemical space that the VOCs with higher risk potentials tended to gather in the region defined by the molecular descriptor related to electronegativity or octanol/water partition coefficient. Our results provided valuable references to improve the chemical safety of the CGS, to promote consumer health, and to advance the sustainable development of food contact materials.

Recent Advances in Non-Targeted Screening of Compounds in Plastic-Based/Paper-Based Food Contact Materials

Ensuring the safety of food contact materials has become a pressing concern in recent times. However, detecting hazardous compounds in such materials can be a complex task, and traditional screening methods may not be sufficient. Non-targeted screening technologies can provide comprehensive information on all detectable compounds, thereby supporting the identification, detection, and risk assessment of food contact materials. Nonetheless, the non-targeted screening of food contact materials remains a challenging issue. This paper presents a detailed review of non-targeted screening technologies relying on high-resolution mass spectrometry for plastic-based and paper-based food contact materials over the past five years. Methods of extracting, separating, concentrating, and enriching compounds, as well as migration experiments related to non-targeted screening, are examined in detail. Furthermore, instruments and devices of high-resolution mass spectrometry used in non-targeted screening technologies for food contact materials are discussed and summarized. The research findings aim to provide a theoretical basis and practical reference for the risk management of food contact materials and the development of relevant regulations and standards.

Mass Spectrometry-Based Techniques for the Detection of Non-Intentionally Added Substances in Bioplastics

The safety of food contact materials is a hot topic since chemicals can migrate from packaging into food, thus raising health concerns about and/or producing changes in the organoleptic properties of foodstuffs. Migration tests are required to demonstrate the compliance with current regulations and to investigate the transferred compounds. In this context, mass spectrometry is the analytical technique of choice for the detection and quantitation of both intentionally added substances, such as antioxidants, stabilizers, processing aids, and non-intentionally added substances (NIAS). Untargeted strategies represent a major analytical challenge, providing a comprehensive fingerprinting of the packaging material and migrating components, allowing for NIAS identification. Hyphenated mass spectrometry-based techniques have been devised for screening the presence of migrating contaminants and for quantitation purposes. Both low-resolution (LRMS) and high-resolution (HRMS) methods were screened, with a special emphasis on the latter because of its capability to directly characterize food contact materials with minimal/no sample preparation, avoiding chromatographic separation, and reducing sample handling, analysis costs, and time. Examples related to the migration of contaminants from existing or newly developed bioplastic materials will be discussed, providing an overview of the most used MS-based methods, covering the state-of-the-art approaches from 2012 up to 2022.

Food and beverage can coatings: A review on chemical analysis, migration, and risk assessment

The internal surface of food and beverage cans is generally covered with polymeric coatings to preserve food and protect metal substrate from corrosion. Coating materials are complex formulations that contain different starting substances (e.g., monomers, prepolymers, additives, etc.) and in addition during the manufacture of the material several compounds can be formed (e.g., reaction products, degradation products, etc.). These substances have the potential to migrate into the food. Many of them have not been identified and only some have been toxicologically evaluated. This article aims to provide a comprehensive review on the analytical methods used for the identification of potential migrants in can coatings. The migration and exposure to chemicals migrating from can coatings are also reviewed and discussed so far, which is essential for risk assessment. Moreover, a brief section on the current status of the legislation on varnishes and coatings for food contact in Europe is also presented. Liquid chromatography coupled to diode array and fluorescence detectors and particularly to mass spectrometry and gas chromatography-tandem mass spectrometry seem to be the techniques of choice for the identification of potential migrants in can coatings. Some studies have reported migration levels of BPA (bisphenol A) and BADGE (bisphenol A diglycidyl ether) and derivatives exceeding the specific migration limits set in the European legislation. On the whole, low dietary exposure to migrants from can coatings has been reported. However, it is interesting to highlight that in these studies the combined exposure to multiple chemicals has not been considered.

A spotlight on analytical prospects in food allergens: From emerging allergens and novel foods to bioplastics and plant-based sustainable food contact materials

The present review throws a spotlight on new and emerging food safety concerns in view of a well-established food allergen risk arising from global socio-economic changes, international trade, circular economy, environmental sustainability, and upcycling. Food culture globalization needs harmonization of regulations, technical specifications, and reference materials towards mutually recognised results. In parallel, routine laboratories require high-throughput reliable analytical strategies, even in-situ testing devices, to test both food products and food contact surfaces for residual allergens. Finally, the currently neglected safety issues associated to possible allergen exposure due to the newly proposed bio- and plant-based sustainable food contact materials require an in-depth investigation.

Safety Risks of Plant Fiber/Plastic Composites (PPCs) Intended for Food Contact: A Review of Potential Hazards and Risk Management Measures

Plant fiber/plastic composites (PPCs), with the benefits of low cost and easy processing, have been widely used in the production of various food contact products. They are generally considered to be economical and environmentally friendly because of their natural raw materials (plant fibers) and recommended to be one of the ideal alternatives to traditional petrochemical-based plastics. However, in addition to plastic resins and plant fibers, some indispensable additives are involved in the production process of PPCs, which may pose food safety risks. To date, excessive migration of hazardous substances (such as melamine) has been reported in some products made of PPCs, and the safety and applicability of PPCs as food contact materials need to be further studied. In this paper, the main raw materials of PPCs used for food contact are taken as the pointcut to analyze the possible hazards, sources of hazards, and existing risk management measures in various countries. The conclusion shows that PPCs used for food contact may have potential safety risks at present. However, systematic research on migration methods and safety assessment are still insufficient, and further studies are needed regarding the main safety risks and migration patterns.

A Fast and Automated Strategy for the Identification and Risk Assessment of Unknown Substances (IAS/NIAS) in Plastic Food Contact Materials by GC-Q-Orbitrap HRMS: Recycled LDPE as a Proof-of-Concept

A fast and automated approach has been developed for the tentative identification and risk assessment of unknown substances in plastic food contact materials (FCM) by GC-Q-Orbitrap HRMS. The proposed approach combines GC-HRMS full scan data acquisition coupled to Compound Discoverer™ 3.2 software for automated data processing and compound identification. To perform the tentative identification of the detected features, a restrictive set of identification criteria was used, including matching with the NIST Mass Spectral Library, exact mass of annotated fragments, and retention index calculation. After the tentative identification, a risk assessment of the identified substances was performed by using the threshold of toxicological concern (TTC) approach. This strategy has been applied to recycled low-density polyethylene (LDPE), which could be used as FCM, as a proof-of-concept demonstration. In the analyzed sample, 374 features were detected, of which 83 were tentatively identified after examination of the identification criteria. Most of these were additives, such as plasticizers, used in a wide variety of plastic applications, oligomers of LDPE, and substances with chemical, industrial, or cosmetic applications. The risk assessment was performed and, according to the TTC approach, the obtained results showed that there was no risk associated with the release of the identified substances. However, complementary studies related to the toxicity of the unidentified substances and the potential mixture toxicity (cocktail effects) should be conducted in parallel using bioassays.

Analytical Approaches for Analysis of Safety of Modern Food Packaging: A Review

Nowadays, food packaging is a crucial tool for preserving food quality and has become an inseparable part of our daily life. Strong consumer demand and market trends enforce more advanced and creative forms of food packaging. New packaging development requires safety evaluations that always implicate the application of complex analytical methods. The present work reviews the development and application of new analytical methods for detection of possible food contaminants from the packaging origin on the quality and safety of fresh food. Among food contaminants migrants, set-off migrants from printing inks, polymer degradation products, and aromatic volatile compounds can be found that may compromise the safety and organoleptic properties of food. The list of possible chemical migrants is very wide and includes antioxidants, antimicrobials, intentionally added substances (IAS), non-intentionally added substances (NIAS), monomers, oligomers, and nanoparticles. All this information collected prior to the analysis will influence the type of analyzing samples and molecules (analytes) and therefore the selection of a convenient analytical method. Different analytical strategies will be discussed, including techniques for direct polymer analysis.

Green in Situ Growth Solid Electrolyte Interphase Layer with High Rebound Resilience for Long-Life Lithium Metal Anodes

Lithium (Li) metal is one of the most promising anodes for the high-energy density lithium batteries. Nevertheless, it is still a great challenge to construct a dendrite-free Li anode with stable solid electrolyte interphase (SEI) by adopting environmentally friendly approaches. Herein, a green artificial Li polylactic acid (LiPLA) SEI layer with biodegradability and highly rebound resilience is fabricated via an in situ reaction to regulate Li metal plating/stripping behavior. Guided by this stable environmentally friendly LiPLA SEI, the Li anode shows excellent stability with suppressive dendrites as demonstrated by a stable cycling of 850 h in LiPLA-Li/LiPLA-Li symmetric batteries and a significant capacity retention rate enhancement of 18% in LiPLA-Li/LiFePO₄ full batteries and 25% in LiPLA-Li/LiNi_3/5Co_1/5-Mn_1/5O₂ full batteries. This proposed strategy provides a green and facile way to ameliorate the stability of the Li anode for safe and long-life lithium metal batteries.