Retrogradation behavior of debranched starch with different degrees of polymerization

Influence of fractions with different molecular weight distributions from high-amylose starches on their digestibility after recrystallization

Type 3 resistant starches (RS3) were prepared from debranched starch (DBS) with different average degree of polymerization (DP) generated from high-amylose pea starch (HAPS) and high-amylose maize starch (HAMS). The results showed that RS3 with DP 35 and DP 39 had the highest RS content (74.5 % and 75.0 %, respectively) after cooking, which were remarkably higher than those of RS3 prepared from mixed fractions (60.6 % and 49.0 %, respectively) and other separated fractions (34.1-63.0 %). The multi-scale structures of RS3, including short-range molecular order, crystalline structure, micro-ordered aggregate structure, microscopic structure, and particle size distribution, were influenced by the average DP. Notably, RS content was positively correlated with the proportion of DP 51-80 and negatively correlated with the proportion of DP 21-30. DBS with DP 51-80 contributed to a more organized micro-ordered aggregate structure at nanometer scale and a larger aggregate structure at micrometer scale, which improved the resistance of RS3 to amylolytic enzymes. However, DBS with DP 21-30 tended to form random coil structure that were more easily to be digested. This research offered new insights into the structure-digestibility relationship of RS3, which is meaningful for the development of RS3 with high resistance to amylolytic enzymes after cooking.

Debranched Lentil Starch-Sodium Alginate-Based Encapsulated Particles of Lacticaseibacillus rhamnosus GG: Morphology, Structural Characterization, In Vitro Release Behavior, and Storage Stability

Starches with different degrees of debranching (DBS30, DBS60, and DBS90) and sodium alginate were used as the wall material for encapsulating particles of Lacticaseibacillus rhamnosus GG (LGG). The structural characteristics of these encapsulated particles were examined, along with the impact of varying levels of debranching on the encapsulation efficiency, the in vitro release of LGG under the simulated gastrointestinal environment, and the storage stability of the encapsulated particles. The results revealed a transformation in the crystalline polymorph from C- to B+V-type following debranching and retrogradation. This process also resulted in a significant decrease in molecular weight and polydispersity index, accompanied by an increase in amylose and resistant starch levels along with the relative crystallinity of the debranched lentil starch. Comparatively, DBS60-LGG and DBS90-LGG exhibited higher encapsulation efficiency and encapsulation yield than UDBS-LGG and DBS30-LGG. Furthermore, these encapsulated particles provided enhanced protection for LGG in both the simulated gastrointestinal environment and the storage process. It can be inferred that a superior encapsulation performance of the debranched lentil starch-sodium alginate-based encapsulated LGG particles was associated with higher debranching levels, a more uniform molecular weight distribution, and a more ordered multi-scale structure of the debranched lentil starch.

Effects of debranched starch on physicochemical properties and in vitro digestibility of flat rice noodles

Aiming to develop flat rice noodles with both desirable textural quality and lower starch digestibility, we investigated the effect of adding indica rice debranched starch (RDBS) on the quality of flat rice noodles. In this study, adding RDBS to flat rice noodles enhanced their mechanical properties. Cooking characteristic analysis showed that incorporating RDBS into dried flat rice noodles increased the rehydration ratio by 16.1 % and reduced rehydration time by 26.5 %. Scanning electron microscopy (SEM) revealed the presence of microparticles formed through the self-assembly of RDBS within the network of flat rice noodles. X-ray diffraction (XRD) analysis demonstrated that the addition of RDBS elevated the crystallinity of the flat rice noodles, rising from 9.59 % to 22.57 %. In addition, the in vitro simulated digestion test suggested the addition of RDBS led to a threefold increase in the content of slowly digestible starch (SDS) and a ninefold increase in resistant starch (RS) content in flat rice noodles. This study found that adding RDBS into flat rice noodles can effectively reduce their digestion rate and improve their eating quality. It could be a promising approach for creating functional rice noodles aimed at alleviating public health concerns such as diabetes and obesity.

Polymorphic nanostarch-mediated assembly of bioactives

Starch as an edible, biosafe, and functional biopolymer, has been tailored at nanoscale to deliver bioactive guests. Nanostarches fabricated in various morphologies including nanosphere, nanorod, nanoworm, nanovesicle, nanopolyhedron, nanoflake, nanonetwork etc., enable them to assemble different kinds of bioactives due to structural particularity and green modification. Previous studies have reviewed nanostarch for its preparation and application in food, however, no such work has been done for the potential of delivery system via polymorphic nanostarches. In this review, we focus on the merits of nanostarch empowered by multi-morphology for delivery system, and also conclude the assembly strategies and corresponding properties of nanostarch-based carrier. Additionally, the advantages, limitations, and future perspectives of polymorphic nanostarch are summarized to better understand the micro/nanostarch architectures and their regulation for the compatibility of bioactive molecules. According to the morphology of carrier, nanostarch effectively captures bioactives on the surface and/or inside core to form tight complexes, which maintains their stability in the human microenvironment. It improves the bioavailability of bioactive guests by different assembly approaches of carrier/guest surface combination, guest@carrier embedment, and nanostarch-mediated encapsulation. Targeted release of delivery systems is stimulated by the microenvironment conditions based on the complex structure of nanostarch loaded with bioactives.

Improvement of in vitro digestibility and thermostability of debranched waxy maize starch by sequential ethanol fractionation

This study aimed to improve the in vitro digestibility and thermostability of debranched waxy maize starch (DWMS) by sequential fractionation. Waxy maize starch was debranched by pullulanase, followed by sequential precipitation through controlling the ratio of starch supernatants to ethanol at 1:0.5, 1:1, and 1:1.5 (v/v). Subsequently the structural, thermal, in vitro digestive properties of DWMS were investigated. In vitro digestion results showed that the secondary ethanol fractionation of 1:1 on the basis of the initial fractionation (1:0.5) induced a significant higher amount of slowly digestive starch (SDS, 30.0 %) and resistant starch (RS, 58.6 %) amongst all three fractions, along with the highest peak temperature (Tp, 106.4 °C) and the highest decomposition value (Td, 310.0 °C) in calorimetric (DSC) and thermogravimetry (TGA) measurements. Chain length distribution, surface morphology, and laser confocal micro-Raman spectroscopy (LCM-Raman) analyses revealed that medium (degree of polymerization, DP 13- 36) and long chains (DP ≥37) respectively constituting 72.0 % and 10.2 % of DWMS resulted in the formation of spheroidal crystallites with higher homogeneity and more ordered short-range structures. Overall, this work confirmed that ethanol fractionation is an efficient method for improving the in vitro digestibility and heat stability of waxy maize starch.

A novel method for obtaining high amylose starch fractions from debranched starch

High amylose starch shows wide applications in food and non-food-based industries. Traditional complex-precipitation approach for the amylose fractionation required a large volume of organic reagents and was possibly risky for food safety. The object of this work was to establish a novel method to obtain starch fractions rich in amylose from debranch starch through repeated short-term retrogradation and centrifugation. Four starch fractions were obtained with the amylose content of 52.08% (C1), 62.28% (C2), 63.58% (C3), and 64.74% (C4). The thermograms of samples displayed that multiple endothermic peaks were detected in C1 and C2 and only one endothermic peak with melting temperature over 120 °C were observed in C3 and C4, indicating their differences in retrogradation behavior. The chain length distribution results of sample exhibited that C1 and C2 contained more short chains (DP ≤ 24), while C3 and C4 consisted of mainly long chains (DP ≥ 25). Accordingly, the differences in fine structures could provide more choices for these fractionated high amylose starch to utilize in practical applications.

Enzymatic synthesis, structure of isomalto/malto-polysaccharides from linear dextrins prepared by retrogradation

Isomalto/malto-polysaccharides (IMMPs) with degree of polymerization (DP) 10-100 have novel potential applications, including enhanced solubility and anti-inflammatory. However, there are minimal synthetic methods for preparing IMMPs with a relatively higher DP, which is due to the lack of suitable molecular weight linear dextrins (I-LDs). The existing I-LDs preparation methods have disadvantages, such as low yield and uncontrollable molecular weight. Therefore, this study proposes a method for preparing soluble linear dextrins (S-LDs, M_w = 2.1 kDa) by low-temperature retrogradation from debranched waxy corn starch (M_w = 3.0 kDa). S-LDs reacted with 4,6-α-glucanotransferase GtfB-ΔN from Limosilactobacillus reuteri 121 to yield IMMPs with 12.3 kDa M_w and 83.8% α1 → 6 linkages content. Process monitoring revealed the synthesis mechanism and a detailed reaction process. Finally, IMMPs were identified by enzyme fingerprinting as α1 → 6 chains with α1 → 4 fragments inlaid at the reducing, non-reducing end, and middle part. This study provides a new synthesis method and more structural information for IMMPs.

Structural factors governing starch digestion and glycemic responses and how they can be modified by enzymatic approaches: A review and a guide

Starch is the most abundant glycemic carbohydrate in the human diet. Consumption of starch-rich food products that elicit high glycemic responses has been linked to the occurrence of noncommunicable diseases such as cardiovascular disease and diabetes mellitus type II. Understanding the structural features that govern starch digestibility is a prerequisite for developing strategies to mitigate any negative health implications it may have. Here, we review the aspects of the fine molecular structure that in native, gelatinized, and gelled/retrograded starch directly impact its digestibility and thus human health. We next provide an informed guidance for lowering its digestibility by using specific enzymes tailoring its molecular and three-dimensional supramolecular structure. We finally discuss in vivo studies of the glycemic responses to enzymatically modified starches and relevant food applications. Overall, structure-digestibility relationships provide opportunities for targeted modification of starch during food production and improving the nutritional profile of starchy foods.

Thermophilic 4-α-Glucanotransferase from Thermoproteus Uzoniensis Retards the Long-Term Retrogradation but Maintains the Short-Term Gelation Strength of Tapioca Starch

Gelation of starch is a process during short-term retrogradation. However, long-term retrogradation always leads to the quality deterioration of starch-based food. In this work, a new type of modified tapioca starch (MTS) gel with maintained short-term gelation strength and retarded long-term retrogradation was prepared using a novel recombinantly produced and characterized 4-α-glucanotransferase (TuαGT). In the resulting MTS, the exterior chains of the amylopectin part were elongated and the content of amylose was reduced because of the disproportionation activity of TuαGT. The retrogradation analysis demonstrated that the MTS possessed highly weakened long-term retrogradation characteristics as compared to the native starch. Most importantly, the strength of the gel formed by regelatinized MTS is very close to that of gelatinized native tapioca starch when storing below 30 °C. These findings provide a starting point for developing a novel method for the enzymatic modification of the starch-based gels.

Fabrication and characterization of hollow starch nanoparticles by heterogeneous crystallization of debranched starch in a nanoemulsion system

The development of hollow nanoparticles has attracted widespread interest due to their potential commercial applications. This work aimed to prepare a novel hollow starch nanoparticles (HSNPs) from debranched waxy corn starch (DBS) via an oil-in-water (O/W) emulsion templating method. The effects of different concentrations of DBS on the formation of HSNPs at 4 °C and 25 °C were investigated. The monodispersed HSNPs obtained with 0.5% concentrations of DBS at 25 °C had spherical shapes, ranging between 200 and 800 nm. HSNPs with relative crystallinities of 16.9%-29.7% exhibited V-type or B + V-type structures, which indicated that DBS at low concentrations (0.5%-2.0%) could recrystallize and concomitantly form starch-lipid complexes around emulsion droplets. This novel approach of preparing HSNPs is viable and simple. The developed HSNPs could have great potential for delivering drugs or active ingredients.