Class-specific determination of fluoroquinolones based on a novel chemiluminescence system with molecularly imprinted polymers

Development of a novel HPLC-CDCL method utilizing nitrogen-doped carbon dots for sensitive and selective detection of dithiocarbamate pesticides in tea

In this study, S-methyl derivatives of dithiocarbamates (DTCs) were shown to significantly enhance chemiluminescence (CL) between Ce(IV) and efficient and environmentally friendly nitrogen-doped carbon dots (NCDs). Based on the elucidation of the CL mechanisms, an innovative approach involving high-performance liquid chromatography coupled with N-CDs and CL detection (HPLC-CDCL) was proposed. The developed method was successfully applied to the highly sensitive detection of three DTC fungicides (dimethyl dithiocarbamate, ethylene bisdithiocarbamate, and propylene bisdithiocarbamate) in tea. The recovery of the established method ranged 70.51-116.45%, with relative standard deviations (RSD) of <9.40%. The limit of detection (S/N = 3) was as low as 0.19 μg/L (as CS2), which is superior to the previous methods and comparable to UPLC-tandem mass spectrometry (MS/MS). Moreover, the proposed approach does not require solid-phase extraction and offers excellent selectivity. This study proposes a novel method for the detection of DTCs in the food safety and environmental fields.

MIPs-SERS Sensor Based on Ag NPs Film for Selective Detection of Enrofloxacin in Food

The quinolone antibiotics represented by enrofloxacin (ENRO) are harmful to the ecological environment and human health due to illegal excessive use, resulting in increasing food residues and ENRO levels in the environment. To this end, we developed a MIPs-SERS method using surface-enhanced Raman spectroscopy (SERS) and molecularly imprinted polymers (MIPs) to detect ENRO in food matrices. Firstly, a layer of silver nanoparticles (Ag NPs) with the best SERS effect was synthesized on the surface of copper rods as the enhancing material by in situ reductions, and then MIPs targeting ENRO were prepared by the native polymerization reaction, and the MIPs containing template molecules wrapped on the surface of silver nanoparticle films (Ag NPs-MIPs) were obtained. Our results showed that the Ag NPs-MIPs could specifically identify ENRO from the complex environment. The minimum detection limit for ENRO was 0.25 ng/mL, and the characteristic peak intensity of ENRO was linearly correlated to the concentration with a linear range of 0.001~0.1 μg/mL. The experimental results showed that in comparison to other detection methods, the rapid detection of ENRO in food matrices using Ag NPs-MIPs as the substrate is reliable and offers a cost-effective, time-saving, highly selective, and sensitive method for detecting ENRO residues in real food samples.

Fluorescent strip sensor for rapid and ultrasensitive determination of fluoroquinolones in fish and milk

The synthetic antibiotics fluoroquinolones are popular due to their good antibacterial performance and low price, but the risk to human health caused by their residues has attracted great attention. In this study, an ultra-sensitive mAb, 4D7, was prepared with an IC₅₀ of 0.027 ng mL^-1 to norfloxacin (NOR) and cross-reactivity of 19.7-47.7% to lomefloxacin (LOM), pefloxacin (PEF), ofloxacin (OFL), enrofloxacin (ENR), ciprofloxacin (CIP), and danofloxacin (DAN). Based on mAb 4D7 and Eu-fluorescent microspheres, a rapid and sensitive immunochromatographic strip was developed for the detection of fluoroquinolone residues in fish and milk. The detection ranges (IC₂₀-IC₈₀) of the strip for the detection of NOR, PEF, LOM, OFL, ENR, CIP and DAN were 0.19-1.1 μg kg^-1, 0.39-2.1 μg kg^-1, 0.5-2.6 μg kg^-1, 0.43-3.3 μg kg^-1, 0.61-3.5 μg kg^-1, 0.69-5.5 μg kg^-1, 0.52-3.4 μg kg^-1 in fish, and 0.027-0.19 μg kg^-1, 0.049-0.34 μg kg^-1, 0.069-0.39 μg kg^-1, 0.06-0.41 μg kg^-1, 0.089-0.65 μg kg^-1, 0.12-0.81 μg kg^-1, 0.091-0.52 μg kg^-1 in milk, respectively. The recovery rates in spiked sample tests were 88.6-113.6% with a coefficient of variation less than 8.4%. Thus the newly-developed strip was sensitive and reliable for rapid on-site detection of fluoroquinolone residues in fish and milk.

A highly sensitive lateral flow immunoassay for the rapid and on-site detection of enrofloxacin in milk

Enrofloxacin (ENR) is a veterinary antibiotic used to treat bacterial infections in livestock. It chiefly persists in foods and dairy products, which in turn pose severe risks to human health. Hence it is very important to detect the ENR in foods and dairy products to safeguard human health. Herein, we attempted to develop a single-step detection lateral flow immunochromatographic assay (LFIA) using gold nanoparticles (AuNPs) for the rapid and on-site detection of ENR in milk samples. An anti-enrofloxacin monoclonal antibody (ENR-Ab) was conjugated with AuNPs for the specific detection of ENR in milk samples. For sensitivity improvement, many optimization steps were conducted on LFIA test strips. The visual limit of detection (vLOD) was found to be 20 ng/ml with a cut-off value of 50 ng/ml in the milk samples. The obtained LOD and cut-off value were within the safety limit guidelines of the Ministry of food and drug safety, South Korea. The test strip showed negligible cross-reactivity with ENR analogs, and other components of antibiotics, this indicates the high specificity of the LFIA test strip towards ENR. The designed test strip showed good reliability. The visual test results can be seen within 10 min without the need for special equipment. Therefore, the test strip can be employed as a potential detection strategy for the qualitative on-site detection of enrofloxacin in milk samples.

A highly sensitive impedimetric sensor based on a MIP biomimetic for the detection of enrofloxacin

The benefits of molecularly imprinted polymer (MIP) technology in creating artificial receptors to replace natural counterparts have piqued the interest of numerous researchers in recent years. We propose a biomimetic enrofloxacin-MIP for enrofloxacin (ENRO) antigen detection using gold nanoparticles (AuNPs) and MIP methodologies in this study. A self-assembled monomer layer of aminothiophenol was used to immobilize a pre-formed complex of the anti-enrofloxacin monoclonal antibody and enrofloxacin antigen onto the surface of an AuNP coated screen-printed carbon ink electrode (SPCE). The poly-(aminothiophenol) layer thickness was adjusted to entrap and restrict enrofloxacin antigens near the surface. The imprinting and removal of the enrofloxacin antigen in the MIP film were strongly validated by the Raman spectra. The final mAb-MIP sensor had better sensitivity (302 Ω mL ng^-1) and a better detection limit (0.05 ng mL^-1) than self-assembled monolayer (SAM)-based immunosensors, which had 102 Ω mL ng^-1 and 0.1 ng mL^-1, respectively.

Selective detection of enrofloxacin in biological and environmental samples using a molecularly imprinted electrochemiluminescence sensor based on functionalized copper nanoclusters

Enrofloxacin (ENR) is a broad-spectrum fungicide that has been largely applied in pharmacy and animal-specific medicine. In this paper, a simple, novel and highly sensitive molecularly imprinted electrochemiluminescence (MIP-ECL) sensor based on mercaptopropionic acid-functionalized copper nanoclusters (MPA-Cu NCs) was developed to selectively detect enrofloxacin (ENR). MPA-Cu NCs prepared by a one-step method were used to modify the glassy carbon electrode. A molecularly imprinted polymer film containing the cavity was constructed after electropolymerization and elution. Under optimized conditions, the MIP-ECL sensor could detect ENR in the range of 0.1 nM-1 μM (R² = 0.9863) with a low limit of detection of 27 pM, and the recovery rates of ENR in biological and lake water samples were 88.20-105.0%. The MIP-ECL sensor provided path to improve the stability issues of Cu NCs, which might open promising avenues to develop new ECL systems for biological analysis and environmental water monitoring.

Recent development of antibiotic detection in food and environment: the combination of sensors and nanomaterials

In recent years, the abuse of antibiotics has led to the pollution of soil and water environment, not only poultry husbandry and food manufacturing will be influenced to different degree, but also the human body will produce antibody. The detection of antibiotic content in production and life is imperative. In this review, we provide comprehensive information about chemical sensors and biosensors for antibiotic detection. We classify the currently reported antibiotic detection technologies into chromatography, mass spectrometry, capillary electrophoresis, optical detection, and electrochemistry, introduce some representative examples for each technology, and conclude the advantages and limitations. In particular, the optical and electrochemical methods based on nanomaterials are discussed and evaluated in detail. In addition, the latest research in the detection of antibiotics by photosensitive materials is discussed. Finally, we summarize the pros and cons of various antibiotic detection methods and present a discussion and outlook on the expansion of cross-scientific areas. The synthesis and application of optoelectronic nanomaterials and aptamer screening are discussed and prospected, and the future trends and potential impact of biosensors in antibiotic detection are outlined.Graphical abstract.

Portable Smartphone-Based QDs for the Visual Onsite Monitoring of Fluoroquinolone Antibiotics in Actual Food and Environmental Samples

Accurate onsite profiling of fluoroquinolone antibiotics (FQs) is of vital significance for ensuring food safety and estimating environmental pollution. Here, we propose a smartphone-based QD ratiometric fluorescence-sensing system to precisely report the level of FQs. As a proof of concept, we chose gatifloxacin (GFLX, a typical member of FQs) as the model for the analytical target, which could effectively trigger the fluorescence color variation of QDs from bright yellow-green (∼557 nm) to blue (∼448 nm) through the photoinduced electron-transfer (PET) process, thus yielding an evident ratiometric response. Based on this, the level of GFLX can be reported within a wide linear range from 0.85 nM to 3.6 μM. Moreover, this assay owns a high sensitivity with a low detection limit of 0.26 nM for GFLX and a quick sample-to-answer monitoring time of 5.0 min, manifesting that this platform could be fully qualified for onsite requirements. Interestingly, this portable device has successfully been applied for the onsite detection of GFLX in real food (i.e., milk and drinking water) and environmental (i.e., fish-farming water) samples with acceptable results. This developed platform offers a great promise for the point-of-care detection of FQ residues in practical application with the merits of being label-free, low-cost, and rapid, thus opening a new pathway for the onsite evaluation of food safety and environmental health.

Profiling the interaction of Al(III)-GFLX complex, a potential pollution risk, with bovine serum albumin

Fluoroquinolone antibiotics (FQs), a new class of pollutants that seriously threaten human health through environmental and food residues, have aroused wide public concern. However, little attention has been paid to the potential toxicity of FQs' metal complex. Here, we firstly explore the proof-of-concept study of FQs' metal complex to bind bovine serum albumin (BSA) using systematical spectroscopic approaches. In detail, we have found that the complex of Al³⁺ with gatifloxacin (Al(III)-GFLX complex) can effectively bind to BSA via electrostatic interaction in PBS buffer (pH = 7.4, 1×), resulting in the formation of Al(III)-GFLX-BSA complex. The negative value of ΔG shows that the binding of Al(III)-GFLX complex to BSA is a spontaneous process. Circular dichroism spectra verify that Al(III)-GFLX complex effectively triggers the conformation changes of BSA's secondary structure. It has been proved that the interaction of small molecule with serum albumin has a significant effect on their in vivo biological effects such as absorption, distribution, metabolism, and excretion, and etc. Therefore, the results of this paper may offer a valuable theoretical basis for establishing safety standards of FQs' metal complex to ensure food and environmental health.