The role of lipids in determining the air-water interfacial properties of wheat, rye, and oat dough liquor constituents

The influence of water-soluble arabinoxylan on the rheological properties of model dough and the interfacial properties of imitation dough liquor

Imitation dough liquor was formulated from natural dough liquid phase components, primarily comprising water-soluble arabinoxylan and wheat-soluble protein. It was found that arabinoxylan limited the diffusion rate of actively adsorbing components (Kdiff: -0.134 mNm-1 s-0.5 to -0.0573 mNm-1 s-0.5) and decreased the zeta potential (10.91 ± 1.31 mV to 5.76 ± 0.27 mV), which enhanced the composite viscosity and exhibited viscous properties in the low shear rate range. Model dough viscoelasticity decreased while rigidity improved with rising arabinoxylan ratios and critical thresholds existed (1:1.5 wheat, 1:2 potato). Arabinoxylan-enriched dough exhibited elevated tanδ values during thermal processing, enhancing ductility and plasticity compared to controls. The "film-like" shaped structure observed in the dough cavity contributes to maintaining the stability of the air-water interface, which in turn affects the rheological properties of the dough. This research establishes foundations for improving high fiber, low glycemic index fermented products.

Study of the influence of beer composition on the amount of bubbles in beer: CO2, alcohol, protein and iso-alpha-acid contents as primary predictors

Due to compositional differences, the mouthfeel of non-alcoholic beers (NABs) is considered inferior to that of alcoholic beers (ABs). Carbonation properties are a key sensation regarding mouthfeel. This study quantified the amount of bubbles in ABs (n = 10) and NABs (n = 9), ranging from 3.5 to 33.2 bubbles/cm2. Notably, NABs produce significantly less bubbles. After an extensive physicochemical characterisation of the beers, the relationship between beer composition and bubble quantity was investigated using response surface methodology. The model showed that the amount of bubbles was predominantly influenced by the CO2 content and the dynamic surface tension at low surface ages (200 ms). In turn, this surface tension was mainly governed by the presence of alcohol, although in NABs proteins and iso-alpha-acids also exerted a significant impact. The amount of bubbles in NABs may be improved by increasing the CO2 content or adding components that reduce the surface tension at low surface ages.

Alkali-Induced Protein Structural, Foaming, and Air-Water Interfacial Property Changes and Quantitative Proteomic Analysis of Buckwheat Sourdough Liquor

In this study, the protein structural, foaming, and air-water interfacial properties in dough liquor (DL) ultracentrifugated from buckwheat sourdough with different concentrations of an alkali (1.0-2.5% of sodium bicarbonate) were investigated. Results showed that the alkali led to the cross-linking of protein disulfide bonds through the oxidation of free sulfhydryl groups in DL. The alterations in protein secondary and tertiary structures revealed that the alkali caused the proteins in DL to fold, decreased the hydrophobicity, and led to a less flexible but compact structure. The alkali accelerated the diffusion of proteins and decreased the surface tension of DL. In addition, the alkali notably improved the foam stability by up to 34.08% at 2.5% concentration, mainly by increasing the net charge, reducing the bubble size, and strengthening the viscoelasticity of interfacial protein films. Quantitative proteomic analysis showed that histones and puroindolines of wheat and 13S globulin of buckwheat were closely related to the changes in the alkali-induced foaming properties. This study sheds light on the mechanism of alkali-induced improvement in gas cell stabilization and the buckwheat sourdough steamed bread quality from the aspect of the liquid lamella.

Rye: Current state and future trends in research and applications

After wheat, rye is the second most important raw material for bread and bakery products, and it is one of the most excellent sources of dietary fibres and bioactive compounds. Besides, rye is utilised in more and more other food products as well, such as breakfast cereals, porridges, pasta, snack products, etc. Interestingly, its production is decreasing worldwide, probably because of the expansion of other cereals (e.g. triticale), but also the effect of climate change can also play a role therein. However, there is no doubt that scientific research aimed at studying the possible health benefits and the potential of rye in the development of novel food products has intensified over the past decade.

The aim of our paper is to make a comprehensive review of the latest results on the compositional and technological properties of rye that fundamentally influence its utilisation for food purposes. Furthermore, this review aims to identify the current development directions and trends of rye products.

Baking Quality Assessment of Twenty Whole Grain Oat Cultivar Samples

Whole grain oat has become an increasingly popular baking ingredient. Still, oat baking poses many industrial challenges because the baking quality criteria have not been set for whole grain oat flours, and cultivar variation remains unknown. We aimed to assess the baking quality variation of twenty whole grain oat cultivar samples, and to identify the factors that caused the variation. It was hypothesised that by optimising the water absorption of the dough (i.e., dough yield) by test baking method, the best baking potential could be achieved for all oat cultivar samples. The baking trials were conducted as whole oat baking, without wheat or gluten additions. In most of the samples, good baking quality was obtained by dough yield optimisation. The highest specific volumes (1.9–1.93 mL/g) and best crumb properties were achieved in the samples with the highest optimal dough yields, 205. However, baking quality varied, as all samples could not be baked with good quality at high dough yields. Additionally, small median particle size and high fat content of the oat flours were related to good baking properties of whole grain oat at optimised dough yield (p < 0.05). These findings can benefit the development and the optimisation of industrial oat baking processes.

Monitoring the Effects of Hemicellulase on the Different Proofing Stages of Wheat Aleurone-Rich Bread Dough and Bread Quality

This study investigated the effects of a hemicellulase dosage (20, 40, and 60 mg kg-1 of flour) on the bread quality and rheological properties of wheat aleurone-rich flour. The results showed that hemicellulase could soften dough and improve extensibility. At the optimum hemicellulase dosage (40 mg kg-1 of flour), the bread specific volume increased by 40.91% and firmness of breadcrumb decreased by 104.57% compared to those of the control. Intermolecular forces indicated that the gluten network during the proofing was mainly strengthened via disulfide bonds, hydrophobic interactions, and hydrogen bonds but not through ionic bonds after hemicellulase addition. Fourier infrared spectroscopy indicated that the hydrolytic activity of hemicellulase catalyzed the transition from α-helix to β-sheet, which verified that viscoelasticity of gluten was enhanced at a dosage of 40 mg kg-1 of flour. These results suggested that hydrolyzation of hemicellulase contributed to the structural of gluten changes, thereby improving the quality of wheat aleurone-rich bread.

Gas cell stabilization by aqueous-phase constituents during bread production from wheat and rye dough and oat batter: Dough or batter liquor as model system

Proper gas cell stability during fermentation and baking is essential to obtain high-quality bread. Gas cells in wheat dough are stabilized by the gluten network formed during kneading and, from the moment this network locally ruptures, by liquid films containing nonstarch polysaccharides (NSPs) and surface-active proteins and lipids. Dough liquor (DL), the supernatant after ultracentrifugation of dough, is a model system for these liquid films and has been extensively studied mostly in the context of wheat bread making. Nonwheat breads are often of lower quality (loaf volume and crumb structure) than wheat breads because their doughs/batters lack a viscoelastic wheat gluten network. Therefore, gas cell stabilization by liquid film constituents may be more important in nonwheat than in wheat bread making. This manuscript aims to review the knowledge on DL/batter liquor (BL) and its relevance for studying gas cell stabilization in wheat and nonwheat (rye and oat) bread making. To this end, the unit operations in wheat, rye, and oat bread making are described with emphasis on gas incorporation and gas cell (de)stabilization. A discussion of the knowledge on the recoveries and chemical structures of proteins, lipids, and NSPs in DLs/BLs is provided and key findings of studies dealing with foaming and air-water interfacial properties of DL/BL are discussed. Next, the extent to which DL/BL functionality can be related to bread properties is addressed. Finally, the extent to which DL/BL is a representative model system for the aqueous phase of dough/batter is discussed and related to knowledge gaps and further research opportunities.

Normal-Phase HPLC-ELSD to Compare Lipid Profiles of Different Wheat Flours

Normal-phase high-performance liquid chromatography (HPLC) is widely used in combination with evaporative light scattering detection (ELSD) for separating and detecting lipids in various food samples. ELSD responses of different lipids were evaluated to elucidate the possibilities and challenges associated with quantification by means of HPLC-ELSD. Not only the number and type of polar functional groups but also the chain length and degree of unsaturation of (free or esterified) fatty acids (FAs) had a significant effect on ELSD responses. Tripalmitin and trilinolein yielded notably different ELSD responses, even if their constituting free FAs produced identical responses. How FA structure impacts ELSD responses of free FAs is thus not predictive for those of triacylglycerols and presumably other lipids containing esterified FAs. Because ELSD responses of lipids depend on the identity of the (esterified) FA(s) which they contain, fully accurate lipid quantification with HPLC-ELSD is challenging and time-consuming. Nonetheless, HPLC-ELSD is a good and fast technique to semi-quantitatively compare the levels of different lipid classes between samples of comparable FA composition. In this way, lipid profiles of different flours from near-isogenic wheat lines could be compared.

Flow field-based data analysis in interfacial shear rheometry

Developments in interfacial shear rheometers have considerably improved the quality of experimental data. However, data analysis in interfacial shear rheometry is still an active field of research and development due to the intrinsic complexity introduced by the unavoidable contact of the interface with, at least, one supporting bulk subphase. Nonlinear velocity profiles, both at the interface and the bulk phases, pervade the system dynamical behavior in the most usual experimental geometries, particularly in the case of soft interfaces. Such flow configurations demand data analysis schemes based on the explicit calculation of the flow field in both the interface and the bulk phases. Such procedures are progressively becoming popular in this context. In this review, we discuss the most recent advances in interfacial shear rheology data analysis techniques. We extensively review some recently proposed flow field-based data analysis schemes for the three most common interfacial shear rheometer geometries (magnetic needle, double wall-ring, and bicone), showing under what circumstances the calculation of the flow field is mandatory for a proper analysis of the experimental data. All cases are discussed starting at the appropriate hydrodynamical models and using the equation of motion of the probe to set up an iterative procedure to compute the value of the complex Boussinesq number and, from it, the complex interfacial viscosity or, equivalently, the complex interfacial modulus. Moreover, two examples of further extensions of such techniques are proposed, concerning the micro-button interfacial shear rheometer and the potential application of interfacial rheometry instruments, together with adapted flow field-based data analysis techniques, for bulk rheometry, particularly in the case of soft samples.

Lipid Compositions and Geographical Discrimination of 94 Geographically Authentic Wheat Samples Based on UPLC-MS with Non-Targeted Lipidomic Approach

Wheat is the staple food for the world’s major populations. However, chemical characters of geographically authentic wheat samples, especially for the lipids, have not been deeply studied. The present research aimed to investigate lipid compositions of Chinese wheat samples and clarify the major markers that contribute to the geographical differences. A total of 94 wheat samples from eight main wheat-producing provinces in China were evaluated to differentiate their lipid compositions. Based on the data collected from ultra-high-performance-liquid-chromatography tandem time-of-flight mass spectrometry (UPLC-Q/TOF MS), an optimized non-targeted lipidomic method was utilized for analyses. As the results, 62 lipid compounds, including fatty acids, phospholipids, galactolipids, triglycerides, diglycerides, alkylresorcinol, and ceramide were tentatively identified. Partial least squares discriminant analysis (PLS-DA) demonstrated a more satisfying performance in distinguishing wheat samples from different origins compared with principal component analysis (PCA). Further, the abundances of triglycerides and glycerophospholipids with more unsaturated fatty acids were found greater in wheat samples from northern origins of China, while more glycolipids and unsaturated fatty acids arose in southern original wheat samples. These findings describe the lipid profiles of wheat samples in China and could contribute to the quality and safety control for the wheat flour products.