Mitigation of 3-MCPD esters and glycidyl esters during the physical refining process of palm oil by micro and macro laboratory scale refining

Investigating the role of adsorbent type and ratio in mitigating 3-MCPD and GE formation during the inhibition of palm oil chemical interesterification via earth treatment

This study examined the potential to mitigate 3-monochloropropane-1,2-diol esters (3-MCPDE) and glycidyl esters (GE) during the inhibition phase of chemical interesterification in refined, bleached, and deodorized (RBD) palm olein oil. Two types of bleaching earth, natural and acid-activated, were used at concentrations ranging from 3% to 6%, and their impact on ester formation was evaluated. Chemical interesterification and adsorption treatments significantly improved oil quality and reduced ester levels (p < 0.05). Specifically, using 6% bleaching earth led to a 98.5% reduction in 3-MCPDE and a 98.3% reduction in GE. The type of bleaching earth did not significantly affect the reduction of these contaminants, while the amount of bleaching earth used played a crucial role in the mitigation.

Fatty acid esters of 3-monochloropropane-1,2-diol and glycidol in palm oil: A review on current industrial-scale mitigation strategies, challenges and perspectives

Glycidyl ester (GE) and 3-monochloropropane-1,2-diol ester (3-MCPDE) are food contaminants formed during edible oil refining. Due to their potential human carcinogenicity, the European Commission has established regulatory limits for vegetable oil, including palm oil. While laboratory-scale studies have shown promising reductions, large-scale implementation remains challenging. This review examines current mitigation technologies for palm oil, evaluated from lab to plant scale, and explores the challenges of large-scale implementation. Effective methods, such as crude palm oil washing, bleaching with non-hydrochloric acid-activated bleaching earth, dual-temperature deodorisation, and double refining, have been successfully tested at pilot scale or larger. Particularly, crude palm oil washing is widely adopted to reduce 3-MCPDE, whereas double refining effectively targets GE. However, a combination of strategies is required to simultaneously reduce 3-MCPDE and GE. These measures often lead to increased costs, oil loss and wastewater generation, with potential impacts on product quality. Furthermore, maintaining crude palm oil quality through good harvesting and milling practices is essential for consistent mitigation results. Continued research is necessary to improve mitigation methods for greater cost efficiency and reduced environmental impact, with large-scale studies needed to validate lab-scale findings and facilitate industry adoption.

Structuration of lipid bases zero-trans and palm oil-free for food applications

This work evaluated structured lipids (SLs) through chemical and enzymatic interesterification (CSLs and ESLs). Blends of soybean oil and peanut oil 1:1 wt% were used, with gradual addition of fully hydrogenated crambe to obtain a final behenic acid concentration of 6, 12, 18, and 24 %. Chemical catalysis used sodium methoxide (0.4 wt%) at 100 °C for 30 min, while enzymatic catalysis used Lipozyme TL IM (5 wt%) at 60 °C for 6 h. Major fatty acids identified were C16:0, C18:0, and C22:0. It was observed that with gradual increase of hard fat, the CSLs showed high concentrations of reaction intermediates, indicating further a steric hindrance, unlike ESLs. Increased hard fat also altered crystallization profile and triacylglycerols composition and ESLs showed lower solid fat, unlike CSLs. Both methods effectively produced SLs as an alternative to trans and palm fats, view to potential future applications in food products.

Effects of Endogenous Antioxidants in Camellia Oil on the Formation of 2-Monochloropropane-1, 3-diol Esters and 3-Monochloropropane-1,2-diol Esters during Thermal Processing

2-Monochloropropane-1, 3-diol (2-MCPD) esters and 3-monochloropropane-1,2-diol (3-MCPD) esters, a class of substances potentially harmful to human health, are usually formed during the refining of vegetable oils under high temperature. The effects of endogenous antioxidants in vegetable oils on the formation of 2- and 3-MCPD esters is still unknown. In this study, the effects of endogenous antioxidants (α-tocopherol, stigmasterol and squalene) on the formation of 2- and 3-MCPD esters in model thermal processing of camellia oil were investigated. The possible formation mechanism of 2- and 3-MCPD esters was also studied through the monitoring of acyloxonium ions, the intermediate ions of 2- and 3-MCPD esters formation, and free radicals by employing infrared spectra and electron paramagnetic resonance (EPR), respectively. The results indicated that the addition of α-tocopherol had either promoting or inhibiting effects on the formation of 2- and 3-MCPD esters, depending on the amount added. Stigmasterol inhibited the formation of 3-MCPD ester and 2-MCPD ester at low concentrations, while promoting their formation at high concentrations. Squalene exhibited a promotional effect on the formation of 3-MCPD ester and 2-MCPD ester, with an increased promotion effect as the amount of squalene added increased. The EPR results suggested that CCl3•, Lipid alkoxyl, N3• and SO3• formed during the processing of camellia oil, which may further mediate the formation of chlorpropanol esters. This study also inferred that squalene promotes the participation of the free radical in chlorpropanol ester formation.

Effects of Consuming Repeatedly Heated Edible Oils on Cardiovascular Diseases: A Narrative Review

Edible oils are inevitable requisites in the human diet as they are enriched with essential fatty acids, vitamins, carotenoids, sterols, and other antioxidants. Due to their nutritive value and commercial significance, edible oils have been used for food preparation for many centuries. The use of global consumption of edible oils has dramatically increased throughout the world in the 21st century owing to their incredible application in all kinds of food preparation. However, a variety of pollutants, such as pesticides, toxic chemicals, heavy metals, and environmental pollution, have contributed to the contamination of edible oils. Furthermore, the benzophenanthridine alkaloids, sanguinarine, dihydrosanguinarine, butter yellow, and other several agents are added intentionally, which are known to cause a number of human diseases. Apart from this, repeated heating and reusing of oils results in trans fats, and lipid peroxidation alters the fatty acid composition, which adversely affects the health of consumers and increases the risk of cardiovascular diseases. Moreover, the prevention of edible oil contamination in human health at various levels is inevitable to ensure consumer safety. Hence, the present review provides an overview of vegetable cooking oils and the health ailments that detection techniques are focused on.

Mitigation of 3-monochloropropane 1,2 diol ester and glycidyl ester in refined oil - A review

The 3-Monochloropropane-1, 2-diol ester (3-MCPDE) and glycidyl ester (GE) are formed at high processing temperatures with the presence of respective precursors. Both are potentially harmful to humans, causing adverse health impacts including kidney damage, reproductive problems, and increased risk of cancer. The presence of 3-MCPDE and GE in palm oil is of particular concern because of its widespread use by the food industry. There are a variety of methods for reducing 3-MCPDE and GE. For example, water washing eliminates mostly inorganic chlorides that, in turn, reduce the formation of 3-MCPDE. 3-MCPDE has also been reduced by up to 99% using combinations of methods and replacing stripping steam with alcohol-based media. Activated carbon, clay, antioxidants, potassium-based salts, and other post-refining steps have positively lowered GE, ranging from 10 to 99%. Several approaches have been successful in reducing these process contaminants without affecting other quality metrics.

Simultaneous mitigation of 3-monochloropropane 1,2 diol ester and glycidyl ester in edible oils: a review

The rising concern about the presence of 3-monochloropropane 1,2 diol ester (3-MCPDE) and glycidyl ester (GE) in food has prompted much research to be conducted. Some process modifications and the use of specific chemicals have been employed to mitigate both 3-MCPDE and GE. Alkalisation using NaOH, KOH, alkali metals or alkaline earth metals and post sparging with steam or ethanol and short path distillation have shown simultaneous mitigation of 51-91% in 3-MCPDE and of 13-99% in GE, both contaminants achieved below 1000 µg/kg. Some of the mitigation methods have resulted in undesirable deterioration in other parameters of the refined oil. When the processed oil is used in food processing, it results in changes to 3-MCPDE and GE. Repeated deep frying above 170 °C in the presence of NaCl and baking at 200 °C with flavouring (dried garlic and onion), resulted in increased 3-MCPDE. Repeated frying in the presence of antioxidants (TBHQ, rosemary and phenolics) decreased 3-MCPDE in processed food. The GE content in foods tends to decline with time, indicating instability of GE's epoxide ring.

Effects of deodorization on the content of polycyclic aromatic hydrocarbons (PAHs), 3-monochloropropane-1,2-diol esters (3-MCPDE) and glycidyl esters (GE) in rapeseed oil using ethanol steam distillation at low temperature

High temperature is beneficial for the removal of polycyclic aromatic hydrocarbons (PAHs) from oil via steam, but leads to an increase in the content of 3-monochloropropane-1,2-diol esters (3-MCPDE) and glycidyl esters (GE). To inhibit the production of 3-MCPDE and GE during the removal of PAHs, rapeseed oil was deodorized using ethanol steam at low-temperature (140-220 °C) (L-ESD) and the content changes were studied for PAHs, 3-MCPDE and GE, and compared with conventional high-temperature water steam deodorization (H-WSD) (250 °C for 60 min). The removal rates of PAHs in L-ESD oil can be higher than those in conventional H-WSD oil, and the contents of 3-MCPDE and GE in L-ESD oil (140-180 °C for 60-100 min) ranged from 48.32 to 73.65 % and 50.49-69.90 %, respectively, in H-WSD oil due to the lower temperature of ethanol steam deodorization. These results indicate that L-ESD is beneficial in minimizing the contents of PAHs, 3-MCPDE and GE in vegetable oil.

Stable Isotope Tracer to Reveal the Interconversion between 3-Monochloro-1,2-propanediol Ester and Glycidyl Ester during the Deodorization Process

In this study, the effects of the deodorization process on the interconversion between 3-monochloro-1,2-propanediol ester (3-MCPDE) and glycidyl ester (GE) using 3-MCPDE or GE standards containing deuterium-labeled palmitic acid (*P), oleic acid (*O), or linoleic acid (*L) were examined. Deuterium-labeled 3-MCPDE or GE was added to palm oil then deodorized at 250 °C for 20, 40, or 60 min. In the 3-MCPDE-spiked palm oil, the deuterium-labeled 3-MCPDE content decreased with deodorization time. Moreover, GE containing *P or *O was detected, but there was no GE containing *L in the 3-MCPDE-spiked palm oil. In the GE-spiked oil, GE containing *O or *L decreased with deodorization time, but the content of GE containing *P did not change over the time. Furthermore, deuterium-labeled 3-MCPDE was not detected in the GE-spiked oil. These results suggest that 3-MCPDE is converted into GE and that fatty acid species bound to 3-MCPDE or GE may affect their interconversion.

Bibliometric Analysis of Research Trends on 3-Monochloropropane-1,2-Diol Esters in Foods

3-Monochloropropane-1,2-diol esters (3-MCPDE) are common food contaminants mainly formed in the edible oil refining process. Due to their potential hazards, 3-MCPDE has become a widespread food safety concern. In this study, CiteSpace and VOSviewer were used to conduct a bibliometric analysis on the 3-MCPDE research papers collected in the Web of Science Core Collection from 1998 to 2022. The results showed that the number of research publications on 3-MCPDE has increased rapidly since 2010. Analysis of the hotspots in 3-MCPDE studies showed that more attention has been paid to the exposure assessment, formation mechanism, detection methods, mitigation methods and toxicity, and toxicology of 3-MCPDE. Finally, the future trends of research on 3-MCPDE were analyzed and proposed. The mitigation methods and toxicology studies of 3-MCPDE are still the research hotspots in the future. In addition, nutritional intervention for 3-MCPDE toxicity will be an emerging trend.

Influence of the Degumming Process Parameters on the Formation of Glyceryl Esters and 3-MCPDE in Refined Palm Oil: Optimization and Palm Oil Quality Analyses

The presence of glyceryl esters (GE) and 3-monochloropropane-1,2-diol esters (3-MCPDE) in refined, bleached, and deodorized (RBD) palm oil is severely concerning to the palm oil consumer. In the present study, the influence of the phosphoric acid degumming process on the formation of GE and 3-MCDE and in the RBD palm oil was determined with varying the acid dose (0.03-0.06 wt%), temperature (70-100 °C), and reaction time (15-45 min). The experimental conditions of the acid degumming process were designed following the central composite design of experiments, and they were optimized using Response Surface Methodology (RSM) based on the minimal formation of GE and 3-MCDE in the RBD palm oil. The optimal experimental conditions of the acid degumming process were a reaction time of 30 min, phosphoric acid concentration of 0.06 wt%, and temperature of 90 °C. Under these experimental conditions, the minimal GE and 3-MCDE formation in RBD palm oil were determined to be 0.61 mg/kg and 0.59 mg/kg; respectively. Several analytical methods were employed to determine RBD palm oil quality, including color, phosphorus, free fatty acids (FFAs), peroxide values, and fatty acid properties. It was found that the phosphoric acid degumming of CPO effectively removed the phosphorus and hydroperoxide content without conceding the quality of palm oil.

Palm oil supply chain factors impacting chlorinated precursors of 3-MCPD esters

Chlorinated compounds such as sphingolipid-based organochlorine compounds are precursors for the formation of 3-monochlororopanediol (3-MCPD) esters in palm oil. This study evaluates the effects of several factors within the palm oil supply chain on the levels of sphingolipid-based organochlorine, which in turn may influence the formation of 3-MCPD esters during refining. These factors include application of inorganic chlorinated fertiliser in the oil palm plantation, bruising and degradation of oil palm fruits after harvest, recycling of steriliser condensate as water for dilution of crude oil during oil palm milling, water washing of palm oil and different refining conditions. It was observed that bruised and degraded oil palm fruits showed higher content of sphingolipid-based organochlorine than control. In addition, recycling steriliser condensate during milling resulted in elevated content of sphingolipid-based organochlorine in palm oil. However, the content of sphingolipid-based organochlorine compounds was reduced by neutralisation, degumming and bleaching steps during refining. Although water washing of crude palm oils (CPO) prior to refining did not reduce the content of sphingolipid-based organochlorine, it did reduce the formation of 3-MCPD esters through the removal of water-soluble chlorinated compounds. It was found that the use of inorganic chlorinated fertiliser in plantations did not increase the content of chlorinated compounds in oil palm fruits and extracted oil, and hence chlorinated fertiliser does not seem to play a role in the formation of 3-MCPD esters in palm oil. Overall, this study concluded that lack of freshness and damage to the fruits during transport to mills, combined with water and oil recycling in mills are the major contributors of chlorinated precursor for 3-MCPD esters formation in palm oil.

Occurrence of thermally induced glycidyl esters and 3-monochloropropane-1,2-diol esters in refined oils and pressed oils manufactured by different processes and associated with human health risks in Taiwan

Glycidyl esters (GEs) and 3-monochloropropane-1,2-diol esters (3-MCPDEs) are heat-induced contaminants mainly formed during oil refining. Information on the occurrence of these contaminants in pressed oils is still limited. In this study, 16 oilseeds pressed with a screw press and a hydraulic press had extremely low concentrations of GEs and 3-MCPDEs. Seed-roasting at high temperatures was the principal factor that significantly increased contents of GEs and 3-MCPDEs in pressed oils, in which higher precursor levels were observed. Occurrence data of GE and 3-MCPDE concentrations in refined oils (n = 25) and pressed oils (n = 26) marketed in Taiwan showed that hot-pressed oils had higher concentrations than their cold-pressed counterparts, and average concentrations of refined oils were > 10-fold higher than those of pressed oils. Risk assessment using the margin of exposure (MOE) approach indicated the presence of GEs in edible oils was of concern for food safety, especially for people who frequently use refined oils.

Design of new lipids from bovine milk fat for baby nutrition

The lipid phase of infant formulas is generally composed of plant-based lipids structured with a high concentration of palmitic acid (C16:0) esterified at the sn-2 position of triacylglycerol since this structure favors the absorption and metabolism of fatty acids. Palm oil is commonly used to make up the lipid phase of infant formulas due to its high concentration of palmitic acid and solids profile and melting point similar to human milk fat. However, the addition of palm oil to infant formulas has been associated with the presence of 3-monochloropropane-1,2-diol (3-MCPD) esters, a group of glycerol-derived chemical contaminants (1,2,3-propanotriol), potentially toxic, formed during the refining process of vegetable oil. Bovine milk fat obtained from the complex biosynthesis in the mammary gland has potential as a technological alternative to replace palm oil and its fractions for the production of structured lipids to be used in infant formulas. Its application as a substitute is due to its composition and structure, which resembles breast milk fat, and essentially to the preferential distribution pattern of palmitic acids (C16:0) with approximately 85% distributed at the sn-1 and sn-2 position of triacylglycerol. This review will address the relationship between the chemical composition and structure of lipids in infant nutrition, as well as the potential of bovine milk fat as a basis for the production of structured lipids in substitution for the lipid phase of vegetable origin currently used in infant formulas.