Dielectric-barrier discharge (DBD) plasma treatment reduces IgG binding capacity of β-lactoglobulin by inducing structural changes

Cold argon plasma-induced aggregated and non-aggregated structural changes in casein and peptidomic insights into allergenicity

Casein (CN) is a common allergen that is challenging to avoid in modern foods. The effect of cold argon plasma (CAP) on reducing CN antigenicity was investigated, focusing on alterations in epitope structure and sequence. CAP mainly contains hydroxyl radicals (∙OH). After a 12-min CAP treatment, the result of ELISA demonstrated an 80.46 % reduction in antigenicity. Transmission electron microscopy and electrophoresis revealed that certain CN aggregated, while multispectral analysis indicated that part of CN was fragmented into smaller peptides. The predictive 3D model suggested the disruption of linear epitopes located in the α-helix region might contribute to the reduced allergenicity. The peptide sequences were compared to the linear epitopes predicted by immunoinformatics approaches, revealing some reduction or breakage of key allergic sequences. Meanwhile, amino acids with aromatic side chains and hydrophobic groups were susceptible to CAP-induced modifications. This investigation demonstrated CAP could be beneficial for processing hypoallergenic foods.

Functionality enhancement of pea protein isolate through cold plasma modification for 3D printing application

Pea protein isolate (PPI) is a valued sustainable protein source, but its relatively poor functional properties limit its applications. This study reports on the effects of cold argon plasma (CP) treatment of a 15 % (w/w) PPI solution on the functionality, structure, and oxidative characteristics of PPI, as well as its application in 3D-printed plant-based meat. Results indicate that hydroxyl radicals and high-energy excited-state argon atoms are the primary active substances. A decrease in free sulfhydryl content and an increase in carbonyl content were observed in treated PPI, indicating oxidative modification. Compared to the control group, the gel strength of PPI was increased by 62.5 % and the storage modulus was significantly improved after 6 min treatment, forming a more ordered and highly cross-linked 3D gel network. Additionally, CP significantly improved the water-holding capacity, oil-holding capacity, emulsifying activity, and emulsion stability of PPI. The α-helix and random coil content in PPI decreased, while the β-sheet content increased, resulting in a more ordered secondary structure after CP treatment. Compared to untreated PPI, the consistency coefficient (K) increased from 36.00 to 47.68 Pa·sn. The treated PPI exhibited higher apparent viscosity and storage modulus and demonstrated better 3D printing performance and self-supporting ability. This study demonstrates that CP can significantly enhance the functional properties of PPI, providing great potential and prospects for improving the printability of 3D printing materials and developing plant protein foods with low-allergenicity.

Atmospheric cold plasma reduces Ara h 1 antigenicity in roasted peanuts by altering the protein structure and amino acid profile

Ara h 1 is the major allergen in peanuts. To enhance the unique flavor, peanuts are usually roasted at high temperatures. However, roasting can increase the allergenic potential, owing to glycation of allergens. Atmospheric cold plasma (ACP) is a non-thermal processing technology that generates reactive species, enabling protein structural changes. Herein, glucose was also added to the ACP-treated peanut protein before roasting. The content and antigenicity of the advanced glycation end products were measured. The antigenicity was evaluated by ELISA and in vitro digestion assays. The amino acid profile and secondary and tertiary protein structures were also assessed. The antigenicity of Ara h 1 decreased by 91 % and 76 % after 30 min of air and nitrogen plasma treatment, respectively. The glycation degree and thermal and digestive stabilities were also reduced. These results correlated with the structural changes, denaturation, and aggregation. Therefore, cold plasma may reduce the allergic effects of peanuts.

Degree of hydrolysis is a poor predictor of the sensitizing capacity of whey- and casein-based hydrolysates in a Brown Norway rat model of cow's milk allergy

The use of infant formulas (IFs) based on hydrolyzed cow's milk proteins to prevent cow's milk allergy (CMA) is highly debated. The risk of sensitization to milk proteins induced by IFs may be affected by the degree of hydrolysis (DH) as well as other physicochemical properties of the cow's milk-based protein hydrolysates within the IFs. The immunogenicity (specific IgG1 induction) and sensitizing capacity (specific IgE induction) of 30 whey- or casein-based hydrolysates with different physicochemical characteristics were compared using an intraperitoneal model of CMA in Brown Norway rats. In general, the whey-based hydrolysates demonstrated higher immunogenicity than casein-based hydrolysates, inducing higher levels of hydrolysate-specific and intact-specific IgG1. The immunogenicity of the hydrolysates was influenced by DH, peptide size distribution profile, peptide aggregation, nano-sized particle formation, and surface hydrophobicity. Yet, only the surface hydrophobicity was found to affect the sensitizing capacity of hydrolysates, as high hydrophobicity was associated with higher levels of specific IgE. The whey- and casein-based hydrolysates exhibited distinct immunological properties with highly diverse molecular composition and physicochemical properties which are not accounted for by measuring DH, which was a poor predictor of sensitizing capacity. Thus, future studies should consider and account for physicochemical characteristics when assessing the sensitizing capacity of cow's milk-based protein hydrolysates.

Current and Potential Applications of Atmospheric Cold Plasma in the Food Industry

The cost-effectiveness and high efficiency of atmospheric cold plasma (ACP) incentivise researchers to explore its potentials within the food industry. Presently, the destructive nature of this nonthermal technology can be utilised to inactivate foodborne pathogens, enzymatic ripening, food allergens, and pesticides. However, by adjusting its parameters, ACP can also be employed in other novel applications including food modification, drying pre-treatment, nutrient extraction, active packaging, and food waste processing. Relevant studies were conducted to investigate the impacts of ACP and posit that reactive oxygen and nitrogen species (RONS) play the principal roles in achieving the set objectives. In this review article, operations of ACP to achieve desired results are discussed. Moreover, the recent progress of ACP in food processing and safety within the past decade is summarised while current challenges as well as its future outlook are proposed.

Effects of dielectric barrier discharge cold plasma on structure, surface hydrophobicity and allergenic properties of shrimp tropomyosin

Effects of dielectric barrier discharge (DBD) cold plasma (CP) on structure, surface hydrophobicity and allergenic properties of tropomyosin (TM) in shrimp were investigated in this study. Results showed that the molecular weight of TM increased and the protein concentration decreased with CP treatment time increased. The content of free amino acids was increased by 74.7 % and the distribution of aromatic amino acids was altered. The content of α-helix was decreased by 69 % and the surface hydrophobicity increased by 57.8 % after 20 min treatment. Allergenicity analysis showed that the IgE binding capacity decreased by 96 % after 20 min treatment, and the degranulation indexes of KU812 cells like the β-HEX release rate, the intracellular calcium ion intensity, the release of histamine and inflammatory cytokines (IL-4, TNF-α) were decreased by 32.5 %, 31.0 %, 37.3 %, 51.7 %, and 70.2 %, respectively. The current study confirmed that DBD CP could reduce the TM allergenicity through structural changes.

Inactivation of Soybean Trypsin Inhibitor by Dielectric-Barrier Discharge Plasma and Its Safety Evaluation and Application

The trypsin inhibitor (TI) is one of the most important anti-nutritive elements in soybeans. As a new nonthermal technology, dielectric-barrier discharge (DBD) cold plasma has attracted increasing attention in food processing. In this research, we investigated the effect of dielectric-barrier discharge (DBD) plasma treatment on soybean trypsin inhibitor content and its structure, evaluated TI toxicity and the safety of its degradation products after treatment with DBD technology in vitro and in vivo, and applied the technology to soybean milk, which was analyzed for quality. Using the statistical analysis of Student’s t-test, the results demonstrated that DBD plasma treatment significantly decreased the content of TI (33.8 kV at 1, 3, or 5 min, p < 0.05, p < 0.01, p < 0.001) and destroyed the secondary and tertiary structures of TI. TI was toxic to Caco-2 cells and could inhibit body weight gain, damage liver and kidney functions, and cause moderate or severe lesions in mouse organ tissues, whereas these phenomena were alleviated in mice treated with degradation products of TI after DBD plasma treatment under the optimal condition (33.8 kV at 5 min). The content of TI in DBD-treated soymilk was also significantly reduced (p < 0.001), while the acidity, alkalinity, conductivity, color, and amino acid composition of soymilk were not affected, and there were no statistical differences (p > 0.05). In summary, DBD plasma is a promising non-thermal processing technology used to eliminate TI from soybean products.

Influence of mild oxidation induced through DBD-plasma treatment on the structure and gelling properties of glycinin

The effects of dielectric-barrier discharge (DBD) plasma treatment (20 s to 120 s treatment time with 40 kV, 12 kHz) induced mild oxidation on the gelling properties, and related structural changes of glycinin were investigated. The gelling ability of glycinin was improved by the mild oxidation induced by the plasma treatment. Treated glycinin gels exhibited a continuous and uniform network microstructure. Samples treated for 120 s had a 2.07-, 3.99- and 2.03-fold increase in hardness, chewiness, and resilience compared to the 20 s treated samples. Structural analyses showed that primary and secondary structures of glycinin were unaffected. The tertiary structure was shifted, accompanied by a decrease in free sulfhydryl (-SH) content. At the same time, carbonyl content and average particle diameter were increased by DBD treatment. The DBD treatment facilitated the generation/exchange of intermolecular disulfide bonds and enhanced gelling properties of glycinin. It is concluded that controlled plasma-induced protein oxidation can improve protein functionality.

Impacts of Cold Plasma Technology on Sensory, Nutritional and Safety Quality of Food: A Review

As an emerging non-thermal food processing technology, cold plasma (CP) technology has been widely applied in food preservation due to its high efficiency, greenness and lack of chemical residues. Recent studies have indicated that CP technology also has an impressing effect on improving food quality. This review summarized the impact of CP on the functional composition and quality characteristics of various food products. CP technology can prevent the growth of spoilage microorganisms while maintaining the physical and chemical properties of the food. It can maintain the color, flavor and texture of food. CP can cause changes in protein structure and function, lipid oxidation, vitamin and monosaccharide degradation, starch modification and the retention of phenolic substances. Additionally, it also degrades allergens and toxins in food. In this review, the effects of CP on organoleptic properties, nutrient content, safety performance for food and the factors that cause these changes were concluded. This review also highlights the current application limitations and future development directions of CP technology in the food industry. This review enables us to more comprehensively understand the impacts of CP technology on food quality and promotes the healthy application of CP technology in the food industry.

Comprehensive Analysis of the Structure and Allergenicity Changes of Seafood Allergens Induced by Non-Thermal Processing: A Review

Seafood allergy, mainly induced by fish, shrimp, crab, and shellfish, is a food safety problem worldwide. The non-thermal processing technology provides a new method in reducing seafood allergenicity. Based on the structural and antigenic properties of allergenic proteins, this review introduces current methods for a comprehensive analysis of the allergenicity changes of seafood allergens induced by non-thermal processing. The IgE-binding capacities/immunoreactivity of seafood allergens are reduced by the loss of conformation during non-thermal processing. Concretely, the destruction of native structure includes degradation, aggregation, uncoiling, unfolding, folding, and exposure, leading to masking of the epitopes. Moreover, most studies rely on IgE-mediated assays to evaluate the allergenic potential of seafood protein. This is not convincing enough to assess the effect of novel food processing techniques. Thus, further studies must be conducted with functional assays, in vivo assays, animal trials, simulated digestion, and intestinal microflora to strengthen the evidence. It also enables us to better identify the effects of non-thermal processing treatment, which would help further analyze its mechanism.

High-Pressure Processing for Sustainable Food Supply

Sustainable food supply has gained considerable consumer concern due to the high percentage of spoilage microorganisms. Food industries need to expand advanced technologies that can maintain the nutritive content of foods, enhance the bio-availability of bioactive compounds, provide environmental and economic sustainability, and fulfill consumers’ requirements of sensory characteristics. Heat treatment negatively affects food samples’ nutritional and sensory properties as bioactives are sensitive to high-temperature processing. The need arises for non-thermal processes to reduce food losses, and sustainable developments in preservation, nutritional security, and food safety are crucial parameters for the upcoming era. Non-thermal processes have been successfully approved because they increase food quality, reduce water utilization, decrease emissions, improve energy efficiency, assure clean labeling, and utilize by-products from waste food. These processes include pulsed electric field (PEF), sonication, high-pressure processing (HPP), cold plasma, and pulsed light. This review describes the use of HPP in various processes for sustainable food processing. The influence of this technique on microbial, physicochemical, and nutritional properties of foods for sustainable food supply is discussed. This approach also emphasizes the limitations of this emerging technique. HPP has been successfully analyzed to meet the global requirements. A limited global food source must have a balanced approach to the raw content, water, energy, and nutrient content. HPP showed positive results in reducing microbial spoilage and, at the same time, retains the nutritional value. HPP technology meets the essential requirements for sustainable and clean labeled food production. It requires limited resources to produce nutritionally suitable foods for consumers’ health.

Feasibility of atmospheric cold plasma for the elimination of food hazards: Recent advances and future trends

In recent decades, food safety has emerged as a worldwide public health issue with economic and political implications. Pesticide residues, mycotoxins, allergens, and antinutritional factors are the primary concerns associated with food products due to their potential adverse health effects. Although various conventional processing methods (such as washing, peeling, and cooking) have been used to reduce or eliminate these hazards from agricultural food materials, the results obtained are not quite satisfactory. Recently, atmospheric cold plasma (ACP), an emerging low -temperature and green processing technology, has shown great potential for mitigating food hazards. However, detailed descriptions of the effects of ACP treatment on food hazards are still not available. Thus, the current review aims to highlight recent studies on the efficacy and application of ACP in the reduction or elimination of pesticide residues, mycotoxins, allergens, and antinutritional factors in various food products. The possible working mechanisms of ACP and its effect on food quality, and the toxicity of degradation products are emphatically discussed. In addition, multiple factors affecting the efficacy of ACP are summarized in detail. At the same time, the major technical challenges for practical application and future development prospects of this emerging technology are also highlighted.

Oxidation induced by dielectric barrier discharge (DBD) plasma treatment reduces IgG/IgE binding capacity and improves the functionality of glycinin

The effect of dielectric barrier discharge (DBD) plasma treatment times from 2 to 5 min at 40 kV on IgG/IgE binding capacity and functionality of soybean glycinin was examined. A substantial reduction in the binding capacity (91.64% for IgG and 81.49% for IgE) was obtained after 5 min of plasma treatment, as determined by western-blot and ELISA analyses. Further studies demonstrated that the elimination of antigenicity and allergenicity of glycinin was directly related to plasma-induced structural changes on two aspects. A conformational alteration caused by oxidation of peptide bond amino groups, accompanied with an oxidation of Trp, Tyr, and Phe amino acid residues, which was confirmed by surface hydrophobicity, multi-spectroscopic analysis, and amino acid analysis. The cleavage of polypeptide chains inevitably partially diminished the linear epitopes, resulting in a primary decline in IgG/IgE binding capacity. Additionally, an increase in the solubility from 10.78 ± 0.35 to 65.96 ± 1.86% and significant increase in the emulsifying ability from 21.08 ± 2.64 to 160.29 ± 4.12 m²/g were observed after treatment of the plasma for 2 min. The present results confirm the potential use of DBD for the production of hypoallergenic soy protein-based products and improving their technical functions such as solubility and emulsifying ability.

Comparison of Different Methods for Extracting the Astaxanthin from Haematococcus pluvialis: Chemical Composition and Biological Activity

In this study, the impact of different cell disruption techniques (high-pressure micro fluidization (HPMF), ionic liquids (ILs), multi-enzyme (ME), and hydrochloric acid (HCl)) on the chemical composition and biological activity of astaxanthin (AST) obtained from Haematococcus pluvialis was investigated. Results indicated that all cell disruption techniques had a significant effect on AST composition, which were confirmed by TLC and UPC² analysis. AST recovery from HCl (HCl-AST) and ILs (ILs-AST) cell disruption techniques was dominant by free and monoesters AST, while AST recovery from HPMF (HPMF-AST) and ME (ME-AST) cell disruption techniques was composed of monoesters, diesters, and free AST. Further biological activity analysis displayed that HCl-AST showed the highest ABTS and DPPH activity, while ILs-AST showed better results against the ORAC assay. Additionally, ILs-AST exhibits a stronger anti-proliferation of HepG2 cells in a dose-dependent manner, which was ascribed to AST-induced ROS in to inhibit the proliferative of cancer cells.