Quality enhancement of smoked sea bass (Dicentrarchus labrax) fillets by adding resveratrol and coating with chitosan and alginate edible films

Shelf-life extension of Pacific white shrimp (Litopenaeus vannamei) using sodium alginate/chitosan incorporated with cell-free supernatant of Streptococcus thermophilus FUA 329 during cold storage

Seafood is highly perishable and has a short shelf-life. This study investigated the effect of chitosan and alginate (CH-SA) coating combined with the cell-free supernatant of Streptococcus thermophilus FUA329 (CFS) as a preservative on the quailty of white shrimp (Litopenaeus vannamei) refrigerated at 4° for 0, 3, 6, 9, 12, 15 days. Freshly shrimps were randomly divided into four groups: the CFS group (400 mL); the CH-SA group (1% chitosan/1% alginate); the CFS-CH-SA group (1% chitosan/1% alginate with 400 mL CFS) are treatment groups, and the control group (400 mL sterile water). The CFS-CH-SA coating effectively suppressed microbial growth total viable count and chemical accumulation (pH, total volatile basic nitrogen, thiobarbituric acid reactive substance) compared with the control. Additionally, the CFS-CH-SA coating improved the texture and sensory characteristics of shrimp during storage. The coated shrimp exhibited significantly reduced water loss (p < 0.05). The combination of CH-SA coating with CFS treatment can extend the shelf life of shrimp. PRACTICAL APPLICATION: Recently, edible films have received more consideration as a promising method to enhance the shelf life of seafood. The presence of Lactic acid bacteria metabolites in edible films reduces spoilage and improves consumer health. Our findings encourage the application of edible coating incorporated with cell-free supernatant of Streptococcus thermophilus FUA 329 to design multifubctional foods and preserve the qualities of shrimp.

Design and Development of an Edible Coating for a Ready-to-Eat Fish Product

The application of chitosan and alginate coatings for a ready-to-eat (RTE) baked fish product was studied. An experimental design was used to investigate the effect of coating a polysaccharide concentration and glycerol addition on the safety (microbial growth) and quality (water loss and lipid oxidation) of an RTE fish product under optimal and abused storage conditions. The results showed that a chitosan coating with 1% (w/v) chitosan in 1% (v/v) acetic acid and 15% (w/w chitosan) glycerol, or a 1% (w/v) alginate coating with no glycerol and no crosslinking, showed the best performance in controlling the tested safety and quality parameters. The desirability method was used to identify the shelf lives of chitosan, alginate, and double-coated RTE products. The chitosan-coated samples showed the best performance with a three-fold shelf-life extension compared to the uncoated products stored at 4 °C. Moreover, the tested coatings demonstrated their ability to provide protective functions under abused storage conditions. These results strongly suggest that edible coatings have significant potential in enhancing the shelf life and safety of ready-to-eat (RTE) fish products.

Impact of sodium alginate-based film loaded with resveratrol and thymol on the shelf life of cooked sausage and the inoculated Listeria monocytogenes

In present study, sodium alginate biodegradable films containing different concentrations of resveratrol (RES: 0.002% and 0.004%) or thymol (THY: 0.5% and 1%) and their combinations were prepared, and evaluated for their effects on spoilage-related microbial profile, lipid oxidation, sensory properties, and protective effects against Listeria monocytogenes in beef mortadella sausage during 40 days storage at 4°C. The release rate of phenolic compounds was determined by the Folin-Ciocalteu test. To assess the shelf life of the product, changes in total viable count (TVC), lactic acid bacteria count (LAB), psychrotrophic bacteria count (PTC), pH levels, thiobarbituric acid reactive substances (TBARS) levels, and sensory characteristics (taste, color, odor, and overall acceptability) were evaluated. For the sensory evaluation, a panel of 70 semi-trained judges was selected according to their initial performance. Samples wrapped with sodium alginate films containing 1% THY (alone or combined with different concentrations of RES) exhibited lower bacterial counts compared to other experimental groups at the end of the storage period (6.01-6.35 vs. 6.71-8.17 log10 CFU/g for TVC, 5.37-5.83 vs. 6.07-7.11 log10 CFU/g for LAB, 5.08-5.18 vs. 5.40-7.23 log10 CFU/g for PTC, and 6.53-6.92 vs. 7.23-9.01 log10 CFU/g for inoculated L. monocytogenes). Sodium alginate films containing the combination of 0.004% RES and different concentrations of THY showed higher antioxidant effects than other experimental groups (TBARS values of 1.68-1.99 vs. 2.23-3.80 mg MDA/kg sample). The sodium alginate film containing 0.004% RES + 1% THY exhibited the highest antimicrobial and antioxidant activities and highest sensory scores among all treatments. These findings highlight the potential application of the sodium alginate film containing a combination of RES and THY as an active packaging material with natural preservatives in the meat products industry. This application can effectively extend the shelf life and enhance the microbial safety of clean-label cooked sausages during refrigerated storage.

Effect of alginate-gallic acid coating on freshness and flavor properties of Mackerel (Scomberomorus commerson) fillets under refrigerated storage

This study investigates the effect of sodium alginate-gallic acid (ALG-GAL) coating on mackerel's flavor compounds and quality properties during cold storage at 4 °C for 12 days. To this end, freshness quality indicators, including biogenic amines (BAs), volatile organic compounds (VOCs), ATP-related compounds, K value, total viable counts (TVC), thiobarbituric acid (TBA), and sensory assessment, were measured. During storage, eight BAs, i.e., histamine (HIS), tyramine (TYR), putrescine (PUT), cadaverine (CAD), 2-phenylethylamine (2-PHE), agimation, spermine (SPM), and spermidine (SPD) were identified in control and treated samples. The biogenic amine index (BAI) for control samples was 56.25 at the time of sensory rejection (day 6). BAI for samples coated with ALG-GAL did not exceed 20 mg/100 g at the time of sensory rejection (day 12). The fillets treated with the ALG alone or incorporated with GAL possessed a different trend in the retardation of VOCs, including aldehydes, ketones, alcohols, and hydrocarbons. Seven key flavors VOCs, including 3-methylbutanal, phenylacetaldehyde, E-2-hexanal, 1-hexanol, 1-octen-3-ol, 2,3 pentanedione, and hydroxyl-2-butanone, were identified in control and coated samples. Samples coated with ALG and GAL were of significantly higher quality (p < 0.05) throughout storage, which could result in lower Inosine (HxR) concentrations and K values. The results of TVC showed that use ALG-GAL had lower bacterial counts compared to control (p < 0.05). The ALG-GAL-coated samples retarded the increase in the contents of TBA during storage. In addition, significant differences in sensory scores between ALG and ALG-GAL were observed (p < 0.05). In this study, aldehydes and hypoxanthine (Hx) were the main compounds in the formation of off-flavor. These results revealed that ALG coating combined with GAL improved the quality of refrigerated mackerel fillets by decreasing off-flavor compounds and TVC population.

Effect on the Quality of Larimichthys crocea Pretreated with Dual-Frequency Orthogonal Ultrasonic-Assisted Immersion with Different Powers during Refrigerated Storage at 4 °C

In recent years, ultrasonic pretreatment technology has been widely used in the aquatic product preservation industry. Among these technologies, dual-frequency ultrasonic refrigeration is the most common. However, in practical applications, selecting the frequency is relatively simple, and there has been less research on power selection. In this paper, the specific frequency (up and down 20 kHz, around 40 kHz), using different powers of (a) 200 W, (b) 300 W, and (c) 400 W processing, ultrasonic intermittent mode with 30 s on/30 s off cycle, and an ultrasonic processing time of 10 min was examined; the control group (CK) comprised samples without ultrasonic treatment. The samples were stored at 4 °C and then placed in a Polyethylene (PE) bag. The changes in microbiological parameters, physicochemical indices, and protein indices of the samples were monitored every two days. The results show that 400 W ultrasonic treatment can significantly inhibit the growth of TVC during storage. The rate of increase in pH, TVB-N, and TBA values decreased significantly compared with the other groups. Compared with the CK group, the shelf life of the 400 W treatment group was extended by 6 days. Therefore, the 400 W pretreatment method based on orthogonal double frequency has strong application potential for effectively extending the shelf life of refrigerated large yellow croaker.

Quality changes of Larimichthys crocea pretreated by ultrasonic-assisted immersion under cold storage at 4 °C

The effects of several ultrasonic treatments during cold storage at 4 °C on the quality of large yellow croaker (Pseudosciaena crocea) were suggested. Large yellow croaker fillets were divided into six different groups for treatment. (a) CK (without any treatment), (b) A (single frequency 20 kHz), (c) B (single frequency 40 kHz), (d) C (left and right dual frequency 20 + 40 kHz), (e) D (orthogonal dual frequency: left and right 40 kHz, upper and lower 20 kHz), and (f) E (orthogonal dual frequency: left and right 20 kHz, upper and lower 20 kHz). The samples were divided into six groups, placed in sterile PE bags, and chilled to 4 °C. In order to determine the impact of ultrasonic treatment on the quality of large yellow croaker during cold storage, microbial indicators and physical and chemical indicators were measured every 3 days. The total number of colonies, the percentage of psychrophilic bacteria, the sample's pH, and its TVB-N value were all shown to grow at a much slower pace following ultrasonic treatment. In addition, the antibacterial effect of dual frequency ultrasound was gradually better than that of single frequency ultrasound. In conclusion, Group D has a pretty excellent impact on preserving overall sample quality.

Application of alginate polymer films and coatings incorporated with essential oils in foods: a review of recent literature with emphasis on nanotechnology

Food waste is one of the major challenges in food safety and finding a solution for this issue is critically important. Herein, edible films and coatings became attractive for scientists as they can keep food from spoilage. Edible films and coatings can effectively preserve the original quality of food and extend its shelf life. Polysaccharides, including starch and cellulose derivatives, chitosan, alginate and pectin, have been extensively studied as biopackaging materials. One of the most interesting polysaccharides is alginate, which has been used to make edible films and coatings. Incorporating essential oils (EO) in alginate matrices results in an improvement in some properties of the edible packages, such as antioxidant and antimicrobial properties. Additionally, the use of nanotechnology can improve the desirable properties of edible films and coatings. In this article we reviewed the antimicrobial and antioxidant properties of alginate coatings and films and their use in various food products.

Application of functionalized chitosan in food: A review

Environmental and sustainability issues have received increasing attention in recent years. As a natural biopolymer, chitosan has been developed as a sustainable alternative to traditional chemicals such as food preservation, food processing, food packaging, and food additives due to its abundant functional groups and excellent biological functions. This review analyzes and summarizes the unique properties of chitosan, with a particular focus on the mechanism of action for its antibacterial and antioxidant properties. This provides a lot of information for the preparation and application of chitosan-based antibacterial and antioxidant composites. In addition, chitosan is modified by physical, chemical and biological modifications to obtain a variety of functionalized chitosan-based materials. The modification not only improves the physicochemical properties of chitosan, but also enables it to have different functions and effects, showing promising applications in multifunctional fields such as food processing, food packaging, and food ingredients. In the current review, applications, challenges, and future perspectives of functionalized chitosan in food will be discussed.

Insight into the Characterization of Volatile Compounds in Smoke-Flavored Sea Bass (Lateolabrax maculatus) during Processing via HS-SPME-GC-MS and HS-GC-IMS

The present study aimed to ascertain how the volatile compounds changed throughout various processing steps when producing a smoke-flavored sea bass (Lateolabrax maculatus). The volatile compounds in different production steps were characterized by headspace-solid phase microextraction-gas chromatography-mass spectrometry (HS-SPME-GC-MS) and headspace-gas chromatography-ion mobility spectrometry (HS-GC-IMS). A total of 85 compounds were identified, and 25 compounds that may be considered as potential key compounds were screened by principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA). Results indicated that aldehydes were the major volatile compounds throughout the processing. The characteristic volatile compound in fresh samples was hexanol, and curing was an effective method to remove the fishy flavor. The concentration of volatile compounds was significantly higher in dried, smoked, and heated samples than in fresh and salted samples. Aldehydes accumulated because of the drying process, especially heptanal and hexanal. Smoke flavoring was an important stage in imparting smoked flavor, where phenols, furans and ketones were enriched, and heating leads to the breakdown of aldehydes and alcohols. This study will provide a theoretical basis for improving the quality of smoke-flavored sea bass products in the future.

A Comprehensive Review of Biodegradable Polymer-Based Films and Coatings and Their Food Packaging Applications

Food sectors are facing issues as a result of food scarcity, which is exacerbated by rising populations and demand for food. Food is ordinarily wrapped and packaged using petroleum-based plastics such as polyethylene, polyvinyl chloride, and others. However, the excessive use of these polymers has environmental and health risks. As a result, much research is currently focused on the use of bio-based materials for food packaging. Biodegradable polymers that are compatible with food products are used to make edible packaging materials. These can be ingested with food and provide consumers with additional health benefits. Recent research has shifted its focus to multilayer coatings and films-based food packaging, which can provide a material with additional distinct features. The aim of this review article is to investigate the properties and applications of several bio-based polymers in food packaging. The several types of edible film and coating production technologies are also covered separately. Furthermore, the use of edible films and coatings in the food industry has been examined, and their advantages over traditional materials are also discussed.

Sustainable edible packaging systems based on active compounds from food processing byproducts: A review

The global food processing industries represent a challenge and a risk to the environment due to the poor handling of residues, which are often discarded as waste without being used in further sidestreams. Although some part of this biomass is utilized, large quantities are, however, still under- or unutilized despite these byproducts being a rich resource of valuable compounds. These biowastes contain biopolymers and other compounds such as proteins, polysaccharides, lipids, pigments, micronutrients, and minerals with good nutritional values and active biological properties with applications in various fields including the development of sustainable food packaging. This review offers an update on the recent advancement of food byproducts recycling and upgrading toward the production of food packaging materials, which could be edible, (bio)degradable, and act as carriers of biobased active agents such as antimicrobials, antioxidants, flavoring additives, and health-promoting compounds. This should be a global initiative to promote the well-being of humans and achieve sustainability while respecting the ecological boundaries of our planet. Edible films and coatings formulations based on biopolymers and active compounds extracted from biowastes offer great opportunities to decrease the devastating overuse of plastic-based packaging. It has become evident that a transition from a fuel-based to a circular bio-based economy is potentially beneficial. Therefore, the exploitation of food discards within the context of a zero-waste biorefinery approach would improve waste management by minimizing its generation, reduce pollution, and provide value-added compounds. Most importantly, the development of edible packaging materials from food byproducts does not compete with food resources, and it also helps decrease our dependency on petroleum-based products. Practical Application Almost 99% of current plastics are petroleum-based, and their continuous use has been devastating to the planet as plastic-derived components have been detected in all trophic levels. Besides, the increasing amounts of food by-products are a socioeconomic and environmental challenge, and halving food loss and waste and turning it into valuable products has become necessary to achieve sustainability and economic circularity. The development of new packaging systems such as edible materials could be one of the solutions to limit the use of persistent plastics. Edible films and coatings by-products-based could also enhance food packaging performance due to their compounds' bioactivities.

Alginate-based delivery systems for food bioactive ingredients: An overview of recent advances and future trends

Due to its advantagessuch as ionic crosslinking, pH responsiveness, excellent biocompatibility, biodegradability and low price, alginate has become one of the most important natural polysaccharides extensively used in constructing desired delivery systems for food bioactive ingredients. In this review, the fundamental knowledge of alginate as a building block for construction of nutraceutical delivery systems is introduced. Then, various types of alginate-based nutraceutical delivery systems are classified and summarized. Furthermore, the future trends of alginate-based delivery systems are highlighted. Currently, alginate-based delivery systems include hydrogel, emulsion, emulsion-filled alginate hydrogel, nanoparticle, microparticle, core-shell particle, liposome, edible film, and aerogel. Although alginate has been widely used in the fabrication of food bioactive ingredient delivery systems, further efforts and improvements are still needed. For this purpose, the future perspectives of alginate-based delivery systems are discussed. The feasible research trends of alginate-based delivery systems include the development of novel large-scale commercial preparation technology, multifunctional delivery system based on alginate, alginate oligosaccharide-based delivery system and alginate-based oleogel. Overall, the objective of this review is to provide useful guidance for rational design and application of alginate-based nutraceutical delivery systems in the future.

Natural Antimicrobials as Additives for Edible Food Packaging Applications: A Review

Edible packaging is a swiftly emerging art of science in which edible biopolymers like lipids, polysaccharides, proteins, resins, etc., and other consumable constituents extracted from various non-conventional sources are used alone or imbibed together. Edible packaging with antimicrobial components had led to the development of the hypothesis of active packaging which safeguards the quality of foods as well as health of consumers. Natural antimicrobial agents (NAMAs) like essential oils from spices, bioactive compounds derived from vegetables and fruits, animal and microorganism derived compounds having antimicrobial properties can be potentially used in edible films as superior replcement for synthetic compounds, thus serving the purpose of quality and heath. Most of the natural antimicrobial agents enjoy GRAS status and are safer than their synthetic counterparts. This review focuses on updated literature on the sources, properties and potential applications of NAMAs in the food industry. This review also analyzes the biodegradability and biocompatibility and edibility properties of NAMAs enriched films and it can be concluded that NAMAs are better substitutes but affect the organoleptic as well as the mechanical properties of the films. Despite many advantages, the inclusion of NAMAs into the films needs to be investigated more to quantify the inhibitory concentration without affecting the properties of films and exerting potential antimicrobial action to ensure food safety.

Effects of gallic acid combined with epsilon-polylysine hydrochloride incorporated in a pullulan-CMC edible coating on the storage quality of sea bass

The effects of edbile coatings, based on pullulan and sodium carboxymethylcellulose (PUL–CMC) with gallic acid (GA) and/or ε-polylysine hydrochloride (PL), on the quality of sea bass (Lateolabrax maculatus) fillets during storage at 4 °C for 20 days were assessed in this study. Total viable counts (TVC), thiobarbituric acid (TBA), pH value, total volatile basic nitrogen (TVB-N), water holding capacity (WHC), water migration, texture profiles, and electronic nose results were measured at five day intervals. The results showed that treatments with PUL–CMC–GA, PUL–CMC–PL, and PUL–CMC–GA–PL coatings retarded the increase of the TVC, TBA, pH, and TVB-N value when compared with the results of the control group. These coatings significantly maintained the content of immobile water, WHC, texture and flavor properties of the fish. In addition, use of PUL–CMC–GA–PL was more effective than use of PUL–CMC–GA and PUL–CMC–PL. The TVC, TVB-N, and pH in the PUL–CMC–GA–PL group were all lower than those in the other groups during the whole storage time. The TBA value in the PUL–CMC–GA–PL group remained below 0.7 mg malonaldehyde (MDA) per kg at 20 d, which was extended by 10 d when compared with the values for the other groups. The WHC in PUL–CMC–GA–PL only decreased by 6.53% during 20 d of storage. The results indicated that GA combined with PL had a synergistic effect on improving the preservation properties of PUL–CMC, which could inhibit lipid oxidation, protein degradation and microbial growth, and maintain better texture characteristics during the storage of sea bass fillets.

This study investigated the effects of pullulan and sodium carboxymethylcellulose composite coatings with gallic acid and/or ε-polylysine hydrochloride on the quality of sea bass fillets during 4 °C storage.

Use of Alginates as Food Packaging Materials

Packaging mainly functions by protecting and preserving its contents. In the case of food packaging, the package protects the contained food product from (i) physical/mechanical damage; (ii) physico-chemical changes due to the effect of light, oxygen, moisture and odors; and (iii) biological changes due to the presence of microorganisms and pests; all the above parameters result in the reduction in product quality and safety. Due to the negative impact of synthetic packaging materials on the environment, research organizations as well as the food industry are currently exploring the possibility of using biodegradable and renewable materials deriving from natural sources. Such biopolymers include: proteins (whey proteins, wheat, corn and soy proteins, gelatin), lipid derivatives (waxes, acetylated triglycerides) and carbohydrates (starch, cellulose and its derivatives, carrageenan, pectin, chitosan, alginates) used in food packaging applications. Alginates are natural hydrophilic polysaccharide biopolymers mainly extracted from marine brown algae. In the form of films or coatings, they exhibit: good film-forming properties, low permeability to O2 and vapors, flexibility, water solubility and gloss while being tasteless and odorless. When combined with additives such as organic acids, essential oils, plant extracts, bacteriocins and nanomaterials, they contribute to the retention of moisture, reduction in shrinkage, retardation of oxidation, inhibition of color and texture degradation, reduction in microbial load, enhancement of sensory acceptability and minimization of cooking losses. Alginates were initially used as a coating for perishable fresh fruits and vegetables to control respiration rate, but can be applied to a wide range of foods, such as meat, poultry, seafood and cheese products, resulting in the extension of product shelf life. When used as part of the principle of active, intelligent and green packaging technologies, alginates can work synergistically to yield a multi-function food packaging system comprising the ultimate goal of food packaging technology.

Effects of chitosan grafted phenolic acid coating on microbiological, physicochemical and protein changes of sea bass (Lateolabrax japonicus) during refrigerated storage

This project aimed to evaluate the effects of gallic acid (GA) and protocatechuic acid (PA) grafted onto chitosan (CS) on the improved quality of sea bass (Lateolabrax japonicus) during refrigerated storage. The incorporation of GA and PA onto CS (CS-g-GA and CS-g-PA) were achieved by the carbodiimide-mediated grafting procedure. Samples were treated with different solutions (deionized water [CK], 1% CS [m/v], 1% CS-g-GA [m/v], and 1% CS-g-PA [m/v]) for 10 min, which were then stored at 4 °C. Microbiological quality, including total viable counts (TVC), psychrophilic bacterial counts (PBC), Pseudomonas bacterial counts, and H₂ S-producing bacterial counts were measured. Physicochemical parameters, including pH, total volatile basic nitrogen (TVB-N), thiobarbituric acid (TBA) value, water holding capacity (WHC), and K value, were measured. The changes in protein characteristics, including sulfhydryl groups (SH), Ca²⁺ -ATPase activity, sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), and tertiary structure of protein were analyzed periodically, along with texture profile analysis (TPA). The results demonstrated that the CS copolymers treatment exhibited better preservation effects. The CS-g-GA and CS-g-PA treatments could significantly inhibit the growth of microorganisms and retard the increase of pH, TVB-N, TBA, WHC, and K-value during refrigerated storage compared with the CK and CS groups. Additionally, the CS-g-GA and CS-g-PA treatments could delay the protein oxidation by keeping a higher SH level and Ca²⁺ -ATPase activity. The CS copolymers treatment could also extend the shelf life for another 6 days compared with that of CK. As a result, CS copolymers can be employed in a promising method for the preservation of sea bass. PRACTICAL APPLICATION: The incorporation of gallic acid and protocatechuic acid onto chitosan (CS-g-GA and CS-g-PA) showed superior antioxidant and antimicrobial activities when applied on sea bass. The CS-g-GA and CS-g-PA coatings could maintain the quality and freshness of refrigerated sea bass. Additionally, this research could provide a theoretical basis for the application of graft copolymers on the preservation of aquatic products.

Characterization of fish collagen from blue shark skin and its application for chitosan- collagen composite coating to preserve red porgy (Pagrus major) meat

Pepsin soluble collagen (PSC) was extracted from blue shark (Prionace glauca) skin and was used for chitosan-collagen composite coating to investigate coating effects on fresh red porgy (Pagrus major) fillet quality during storage at 4°C. Total volatile basic nitrogen (TVB-N), thiobarbituric acid (TBA), pH, K value, drip loss, and sensory evaluation scores were measured as deterioration indexes. Results show that coating by 1% of chitosan solutions containing 0.0%-0.8% of PSC significantly improved most deterioration indexes. Coating by 1% of chitosan solution containing 0.8% of PSC yielded the best results for K value, drip loss, and sensory evaluation, although the other indexes show no clear PSC concentration dependence. These results indicate 1% of chitosan solution containing 0.8% of PSC as the best coating formulation examined in this study. PRACTICAL APPLICATIONS: Aquatic products have high contents of water and protein. Their qualities are likely to decline because of endogenous chemical and enzyme reactions, and also because of the role of spoilage and pathogenic microorganisms during storage. The edible collagen and chitosan coating suggested by this research is biodegradable, biocompatible, cost effective, and is able to meet the requirements for food quality and storage duration. Pepsin soluble collagen (PSC) is an aquatic product processing by-product that makes the maximum use of resources. As described herein, a composite formulation comprising collagen and chitosan improves preservation effects of different types of coatings. A more high-quality and effective edible coating formulation was obtained, thereby extending the red porgy fillet shelf life.

Polysaccharide and Protein Films with Antimicrobial/Antioxidant Activity in the Food Industry: A Review

From an economic point of view, the spoilage of food products during processing and distribution has a negative impact on the food industry. Lipid oxidation and deterioration caused by the growth of microorganisms are the main problems during storage of food products. In order to reduce losses and extend the shelf-life of food products, the food industry has designed active packaging as an alternative to the traditional type. In the review, the benefits of active packaging materials containing biopolymers (polysaccharides and/or proteins) and active compounds (plant extracts, essential oils, nanofillers, etc.) are highlighted. The antioxidant and antimicrobial activity of this type of film has also been highlighted. In addition, the impact of active packaging on the quality and durability of food products during storage has been described.

Alginate-Based Edible Films and Coatings for Food Packaging Applications

Alginate is a naturally occurring polysaccharide used in the bio industry. It is mainly derived from brown algae species. Alginate-based edible coatings and films attract interest for improving/maintaining quality and extending the shelf-life of fruit, vegetable, meat, poultry, seafood, and cheese by reducing dehydration (as sacrificial moisture agent), controlling respiration, enhancing product appearance, improving mechanical properties, etc. This paper reviews the most recent essential information about alginate-based edible coatings. The categorization of alginate-based coatings/film in food packaging concept is formed gradually with the explanation of the most important titles. Emphasis will be placed on active ingredients incorporated into alginate-based formulations, edible coating/film application methods, research and development studies of coated food products and mass transfer and barrier characteristics of the alginate-based coatings/films. Future trends are also reviewed to identify research gaps and recommend new research areas. The summarized information presented in this article will enable researchers to thoroughly understand the fundamentals of the coating process and to develop alginate-based edible films and coatings more readily.

Low-Field NMR and MRI to Analyze the Effect of Edible Coating Incorporated with MAP on Qualities of Half-Smooth Tongue Sole (Cynoglossus Semilaevis Günther) Fillets during Refrigerated Storage

Nondestructive and fast measurement and characterization of fish is highly desired during various processing treatments. This research investigated the effectiveness of low field LF-NMR and MRI as fast monitoring techniques to estimate the qualities of half-smooth tongue sole fillets treated with edible coating combined with modified atmosphere packaging during refrigeration. T2 relaxation spectra showed three peaks representing bound water (T21), immobile water (T22), and free water (T23), respectively. pT22 accounted for the largest proportion of three types of water, followed by pT23. The weighted MRI provided the internal structure information associated with different samples, indicting the combination of edible coating and MAP (70% CO2 + 30% N2) is the best performance in the maintenance of qualities and freshness of HTS fillets. All results demonstrated that the combination of LF-NMR and MRI as fast and nondestructive methods have great potential to monitor qualities deterioration and predict shelf life in of HTS fillets during refrigerated storage.