Ultrasound-assisted dispersive-filter extraction coupled with high-performance liquid chromatography: A rapid miniaturized method for the determination of phenylurea pesticides in vegetables and fruits

Molecularly imprinted resin modified with ionic liquid for dispersive filter extraction and determination of perfluoroalkyl acids in eggs

Perfluoroalkyl acids (PFAAs) are emerging pollutants that endangers food safety. Developing methods for the selective determination of trace PFAAs in complex samples remains challenging. Herein, an ionic liquid modified porous imprinted phenolic resin-dispersive filter extraction-liquid chromatography-tandem mass spectrometry (IL-PIPR-DFE-LC-MS/MS) method was developed for the determination of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) in eggs. The new IL-PIPR adsorbent was prepared at room temperature, which avoids the disorder and instability of the template at high temperatures. The imprinting factor of IL-PIPR for PFOA and PFOS exceeded 7.3. DFE, combined with IL-PIPR (15 mg), was used to extract PFOA and PFOS from eggs within 15 min. The established method exhibits low limits of detection (0.01-0.02 ng/g) and high recoveries (84.7%-104.7%), which surpass those of previously reported methods. This work offers a new approach to explore advanced imprinted adsorbents for PFAAs, efficient sample pretreatment technique, and analytical method for pollutants in foods.

Green synthesis of superhydrophilic resin/graphene oxide for efficient analysis of multiple pesticide residues in fruits and vegetables

The escalating use of pesticides on fruits and vegetables has raised concerns about potential health risks. Therefore, we developed a superhydrophilic resin/graphene oxide (SR/GO) with rich adsorption interactions using an eco-friendly synthetic approach. SR/GO demonstrated excellent hydrophilicity, ensuring optimal contact with aqueous sample matrices. The multiple adsorption interactions, including π-π conjugation, hydrogen bonding, and electrostatic adsorption, facilitated multi-pesticide residue co-extraction. The synthesized SR/GO was applied to a miniaturized centrifugation-accelerated pipette-tip extraction method, coupled with high-performance liquid chromatography. The optimized method exhibited low consumption (15.0 mg adsorbent), and high efficiency, with low detection limits (1.4-2.9 ng g-1) and high recoveries (75.3-113.0%). Water-compatible SR/GO, along with a miniaturized extraction process, showcases a potent analytical approach for pesticide residue analysis in fruits and vegetables. The significance of this method lies in its ability to ensure agricultural and food safety by using a low-cost and efficient multi-pesticide residue analytical strategy.

Determination of multi-class pesticide residues in food commodities from Gujarat, India and evaluation of acute and chronic health risk

An increasing concern for food safety has drawn attention to the overuse of pesticides, which pose a risk to public health. The present study determined 61 pesticide residues in 120 samples of cauliflower, green chili, cucumber, grapes, bananas and mangoes samples, and these were collected from markets in Ahmedabad, Gandhinagar, Surendranagar, Anand and Sabarkantha districts of Gujarat state, India. The samples were extracted and analyzed using ultra-high performance liquid chromatography-time of flight mass spectrometry (UHPLC-q-TOF-MS) and Gas chromatography-tandem mass spectrometry (GC-MS/MS). In addition, the health risk assessment associated with pesticide residues were evaluated by calculating the Hazard Quotient (HQ) and Hazard Index (HI), which indicate a value of less than 1 is safe for consumption. Out of 61 pesticide residues, 29 residues were detected in 107 samples; 68 samples showed multiple residues, and 39 samples found a single residue. Pesticides such as dimethoate, λ-cyhalothrin, fenvalerate, bifenthrin, and cyfluthrin were frequently detected in samples. HI in adults and adolescents confirmed a value less than 1 in cauliflower, cucumber, grapes and mango samples and greater than 1 in green chili and banana samples, respectively. The overall results depicted that, no considerable risk was observed in the selected food commodities. However, green chili and banana samples were found to exhibit marginal risk to human health. As a result, proper application, implementation of control plans, and continuous monitoring are required to prevent the risk and safeguard human health.

Multi-residue analysis, dissipation behavior, and final residues of four insecticides in supervised eggplant field

In this study, the residues of four insecticides, spirotetramat, flonicamid, thiamethoxam, and tolfenpyrad, and their metabolites, including spirotetramat-enol, spirotetramat-mono-hydroxy, spirotetramat-keto-hydroxy, spirotetramat-enol-glucoside, 4-trifluoromethylnicotinamide, 4-trifluoromethylnicotinic acid, N-(4-trifluoromethylnicotinoyl) glycine, and clothianidin, were assessed using a single analysis method. The samples were extracted by acetonitrile, then purified by dispersive solid phase extraction and quantified using high performance liquid chromatography tandem mass spectrometry. The average recovery rate of 12 target compounds was 73.5-103.7%, the relative standard deviation was 1.1-18.3%, and the limit of quantification was 0.01-0.05 mg/kg. The results showed good linearity (R² >0.99), meeting the requirements of the pesticide residue analysis. The dissipation half-lives of the four insecticides in eggplant were 3.4-14.5 days. After the last applications at 7 and 10 days, the final residues of the four insecticides in eggplant were <0.01-0.21, 0.085-0.26, <0.05-0.078, and <0.01-0.21 mg/kg, respectively. The dissipation and final residue results could provide a theoretical basis for the rational application of four insecticides in eggplant fields.HighlightsHPLC-MS/MS for simultaneous determination of four insecticides and their metabolites in eggplant fields.The dissipation dynamics and final residue of the target compounds in field eggplant were studied.Guidance for the safe use of four insecticides on eggplant.

Progress in Nanomaterials-Based Enzyme and Aptamer Biosensor for the Detection of Organophosphorus Pesticides

With the improvement of people's safety awareness, the requirement of pesticide detection is gradually increasing, and many new detection methods toward Organophosphorus pesticide (OPs) has been further developed and applied. Nanomaterials-based biosensors have played an important role in the trace detection of OPs. This article mainly introduces the detection principle of enzymes and aptamers as the identification element of biosensors. Various nanomaterials (i.e., metals and metal oxides, carbon nanotubes, graphene and graphene oxide, quantum dots, metal organic frameworks, molecular imprinted polymers, etc.) possess their unique properties and play different roles in the enzyme and aptamer-based biosensors toward OPs: (a) to produce the optical or electrochemical signal; (b) as a carrier to load the enzyme or aptamer; (c) to enhance the signal response. Besides, the intelligent portable devices provide the possibility to realize the onsite and real-time detection. The limitations of some nanomaterials and the future development are discussed. Finally, the future of enzyme and aptamer-based biosensors has prospected.

Ionic Liquid Modified Porous Polymer as a Dispersive Filter Extraction Adsorbent for Simple, Sensitive, and Efficient Determination of Chlorotriazine Herbicides in Irrigation Water

Triazine herbicides (TRZHs) are widely used in agricultural production, but their improper use can threaten the environment and organisms. Herein, rapid extraction of four chlorotriazine herbicides (Cl-TRZHs) in irrigation water was achieved using an ionic liquid modified porous m-aminophenol formaldehyde resin (IL-MAPFR) as a dispersive filter extraction (DFE) adsorbent. The IL-MAPFR shows excellent adsorption performance for four Cl-TRZHs (simazine, cyanazine, atrazine, and terbuthylazine), with a large specific surface area (158.1 m² g^-1) and fast mass transfer (2 min). The adsorption process conforms to the pseudo-second-order kinetics and Freundlich isotherm models. The four Cl-TRZHs were concentrated 12-16-fold after the IL-MAPFR-DFE method. Coupled with high-performance liquid chromatography, an accurate and sensitive determination method for four Cl-TRZHs in irrigation water was established, with low detection limit (0.11-0.20 ng mL^-1), high recoveries (91.5-110%), and excellent precision (relative standard deviations (RSDs) ≤ 8.4%). This method provides technical support for agricultural irrigation water quality monitoring and has great application potential in water safety, especially pesticide residues.

Catalysis-induced performance enhancement of an electrochemical microcystin-LR aptasensor based on cobalt-based oxide on a B, N co-doped graphene hydrogel

Microcystin detection is of great significance and an urgent need because of its damage to water environments and human health. In this paper, an electrochemical aptasensor was developed by combining a 3D cobalt-based oxide modified boron and nitrogen co-doped graphene hydrogel (3D BNG/Co) with a DNA aptamer for sensitive detection of microcystin (MC-LR) through differential pulse voltammetry (DPV) technology. By using 3D BNG/Co as a catalyst and [Fe(CN)6]3-/4- as a redox probe, the catalytic current signal was 3.8 times higher than that of the bare glassy carbon electrode, which can better monitor the electron conduction on the electrode surface and then improve the sensitivity. The as-fabricated electrochemical aptasensor displayed a wide detection range (0.1-1000 pmol L-1), low detection limit (0.03 pmol L-1), good sensitivity, and repeatability, which has potential applications for the protection of the ecological environment and human health.