A rapid method to detect green pea and peanut adulteration in pistachio by using portable FT-MIR and FT-NIR spectroscopy combined with chemometrics

Integration of Destructive and Non-Destructive Analytical Determinations for Evaluating Quality of Fresh and Roasted Hazelnuts Subjected to Different Processing Temperatures

The internal quality of hazelnuts (Corylus avellana L.), particularly in terms of the degradation of fat components, is widely recognized as a key factor in determining the appropriate type of industrial processing. Additionally, the internal composition and volatile profile of hazelnuts change significantly based on different roasting conditions. The here reported study investigates the efficiency of Electronic Nose (E-nose) and Near-Infrared Spectroscopy (FT-NIR) technologies, combined with multivariate statistical techniques, for the rapid discrimination of hazelnuts subjected to different roasting conditions. Moreover, the study examines the ability of NIR to predict several key quality parameters in fresh and processed hazelnuts. Hazelnut samples were collected throughout the entire industrial processing chain, from delivery to roasting. The influence of three different roasting temperatures (140-150-160°C) was evaluated, keeping the roasting time constant at 24 min. Partial Least Squares models were computed to estimate moisture content, total soluble solids, protein content, acidity, and peroxide index through correlation with FT-NIR spectral data. Excellent regression performances were achieved for all quality parameters, except acidity, with correlations ranging between 0.951 and 0.918. Discriminant analysis models, specifically PLS-DA and Cluster Analysis, were used to assess the ability to discriminate hazelnuts subjected to different roasting conditions using FT-NIR and the Electronic Nose as non-destructive tools. Obtained results from these non-destructive techniques, particularly the volatile characterization GC/MS-performed, accurately reflected the differentiation of samples observed through traditional chemical analyses, effectively distinguishing different groups of samples based on roasting temperature. The use of non-destructive tools such as FT-NIR and E-nose during the post-harvest life and processing of hazelnuts offers an excellent solution for monitoring key quality parameters significantly important for the food industry.

Tracing pistachio nuts' origin and irrigation practices through hyperspectral imaging

Pistachio trees have become a significant global agricultural commodity because their nuts are renowned for their unique flavour and numerous health benefits, contributing to their high demand worldwide. This study explores the application of Hyperspectral Imaging (HSI) and Machine Learning (ML) to determine pistachio nuts' geographic origin and irrigation practices, alongside predicting essential commercial quality and yield parameters. The study was conducted in two Spanish orchards and employed HSI technology to capture spectral data. It used ML models like Partial Least Squares (PLS), Support Vector Machine (SVM), and Extreme Gradient Boosting (XGBoost) for analysis. The results demonstrated high accuracy in classifying pistachios based on origin, with accuracies exceeding 94%, and in assessing water content and colour pigments, where both PLS and SVM models achieved 99% accuracy. The research highlighted distinct spectral signatures associated with different irrigation treatments, particularly in the Near-Infrared (NIR) region, with PLS showing an accuracy of 92%. However, challenges were noted in predicting fruit orientation, while predicting height location within the tree was more successful, reflecting clearer spectral distinctions. Regression models also showed promise, particularly in predicting yield (R2 = 0.89 with PLS) and percentage of blank nuts (R2 = 0.71 with PLS). The correlation analysis revealed key insights, such as an inverse relationship between blank nuts and yield, and a strong correlation between yield and split nuts. Despite challenges in predicting fruit orientation, the research showed promising results in forecasting yield and commercial quality factors, indicating the effectiveness of spectral analysis in optimising pistachio production and sustainability.

Portable and miniature sensors in supply chain for food authentication: a review

Food fraud, a pervasive issue in the global food industry, poses significant challenges to consumer health, trust, and economic stability, costing an estimated $10-15 billion annually. Therefore, there is a rising demand for developing portable and miniature sensors that facilitate food authentication throughout the supply chain. This review explores the recent advancements and applications of portable and miniature sensors, including portable/miniature near-infrared (NIR) spectroscopy, e-nose and colorimetric sensors based on nanozyme for food authentication within the supply chain. After briefly presenting the architecture and mechanism, this review discusses the application of these portable and miniature sensors in food authentication, addressing the challenges and opportunities in integrating and deploying these sensors to ensure authenticity. This review reveals the enhanced utility of portable/miniature NIR spectroscopy, e-nose, and nanozyme-based colorimetric sensors in ensuring food authenticity and enabling informed decision-making throughout the food supply chain.

Miniaturized Near-Infrared spectrophotometers in forensic analytical science - a critical review

The advent of miniaturized NIR instruments, also known as compact, portable, or handheld, is revolutionizing how technology can be employed in forensics. In-field analysis becomes feasible and affordable with these new instruments, and a series of methods has been developed to provide the police and official agents with objective, easy-to-use, tailored, and accurate qualitative and quantitative forensic results. This work discusses the main aspects and presents a comprehensive and critical review of compact NIR spectrophotometers associated with analytical protocols to produce information on forensic matters.

NIR Sensing Technologies for the Detection of Fraud in Nuts and Nut Products: A Review

Food fraud is a major threat to the integrity of the nut supply chain. Strategies using a wide range of analytical techniques have been developed over the past few years to detect fraud and to assure the quality, safety, and authenticity of nut products. However, most of these techniques present the limitations of being slow and destructive and entailing a high cost per analysis. Nevertheless, near-infrared (NIR) spectroscopy and NIR imaging techniques represent a suitable non-destructive alternative to prevent fraud in the nut industry with the advantages of a high throughput and low cost per analysis. This review collects and includes all major findings of all of the published studies focused on the application of NIR spectroscopy and NIR imaging technologies to detect fraud in the nut supply chain from 2018 onwards. The results suggest that NIR spectroscopy and NIR imaging are suitable technologies to detect the main types of fraud in nuts.

Portable NIR spectroscopy: the route to green analytical chemistry

There is a growing interest for cost-effective and nondestructive analytical techniques in both research and application fields. The growing approach by near-infrared spectroscopy (NIRs) pushes to develop handheld devices devoted to be easily applied for in situ determinations. Consequently, portable NIR spectrometers actually result definitively recognized as powerful instruments, able to perform nondestructive, online, or in situ analyses, and useful tools characterized by increasingly smaller size, lower cost, higher robustness, easy-to-use by operator, portable and with ergonomic profile. Chemometrics play a fundamental role to obtain useful and meaningful results from NIR spectra. In this review, portable NIRs applications, published in the period 2019-2022, have been selected to indicate starting references. These publications have been chosen among the many examples of the most recent applications to demonstrate the potential of this analytical approach which, not having the need for extraction processes or any other pre-treatment of the sample under examination, can be considered the "true green analytical chemistry" which allows the analysis where the sample to be characterized is located. In the case of industrial processes or plant or animal samples, it is even possible to follow the variation or evolution of fundamental parameters over time. Publications of specific applications in this field continuously appear in the literature, often in unfamiliar journal or in dedicated special issues. This review aims to give starting references, sometimes not easy to be found.

Mid-Level Data Fusion Combined with the Fingerprint Region for Classification DON Levels Defect of Fusarium Head Blight Wheat

In this study, a method of mid-level data fusion with the fingerprint region was proposed, which was combined with the characteristic wavelengths that contain fingerprint information in NIR and FT-MIR spectra to detect the DON level in FHB wheat during wheat processing. NIR and FT-MIR raw spectroscopy data on normal wheat and FHB wheat were obtained in the experiment. MSC was used for pretreatment, and characteristic wavelengths were extracted by CARS, MGS and XLW. The variables that can effectively reflect fingerprint information were retained to build the mid-level data fusion matrix. LS-SVM and PLS-DA were applied to investigate the performance of the single spectroscopic model, mid-level data fusion model and mid-level data fusion with fingerprint information model, respectively. The experimental results show that mid-level data fusion with a fingerprint information strategy based on fused NIR and FT-MIR spectra represents an effective method for the classification of DON levels in FHB wheat samples.

Screening for pesticide residues in cocoa (Theobroma cacao L.) by portable infrared spectroscopy

Rapid assessment of pesticide residues ensures cocoa bean quality and marketability. In this study, a portable FTIR instrument equipped with a triple reflection attenuated total reflectance (ATR) accessory was used to screen cocoa beans for pesticide residues. Cocoa beans (n = 75) were obtained from major cocoa growing regions of Peru and were quantified for pesticides by gas chromatography (GC) or liquid chromatography (LC) coupled with mass spectrometry (MS). The FTIR spectra were used to detect the presence of pesticides in cocoa beans or lipid fraction (butter) by using a pattern recognition (Soft Independent Modeling by Class Analogy, SIMCA) algorithm, which produced a significant discrimination for cocoa nibs (free or with pesticides). The variables related to the class grouping were assigned to the aliphatic (3200-2800 cm^-1) region with an interclass distance (ICD) of 3.3. Subsequently, the concentration of pesticides in cocoa beans was predicted using a partial least squares regression analysis (PLSR), using an internal validation of the PLRS model, the cross-validation correlation coefficient (R_val = 0.954) and the cross-validation standard error (SECV = 14.9 mg/kg) were obtained. Additionally, an external validation was performed, obtaining the prediction correlation coefficient (R_pre = 0.940) and the standard error of prediction (SEP = 16.0 μg/kg) with high statistical performances, which demonstrates the excellent predictability of the PLSR model in a similar real application. The developed FTIR method presented limits of detection and quantification (LOD = 9.8 μg/kg; LOQ = 23.1 μg/kg) with four optimum factors (PC). Mid-infrared spectroscopy (MIR) offered a viable alternative for field screening of cocoa.

Rapid Sensing: Hand-Held and Portable FTIR Applications for On-Site Food Quality Control from Farm to Fork

Today, one of the world's biggest problems is the assurance of food integrity from farm to fork. Economically motivated food adulteration and food authenticity problems are increasing daily with considerable health and economic effects. Early detection and prevention of food integrity-related problems could be provided by the application of effective on-site food analysis technologies. FTIR spectroscopy coupled with chemometrics can be used for the rapid quality control of a wide variety of food products with fast, high-throughput, accurate and nondestructive analysis advantages. In particular, hand-held and portable FTIR instruments have the potential to surveil food quality and food safety in various critical segments of the food supply chain. In this review, we explore the abilities of hand-held and portable FTIR spectrometers combined with multivariate statistics to conduct a quality evaluation of various food products in terms of food adulteration and authenticity issues. An examination of the literature showed that comparable results were obtained based on detection limits, correlation coefficient (R²) values, standard error values and discrimination power by using both portable/hand-held FTIR spectrometers and benchtop FTIR spectrometers. In conclusion, this review highlights the potential usefulness of portable and hand-held FTIR spectrometers combined with chemometrics for maintaining the food quality through the presentation of various applications that may shed light for on-site food control at any point of the food supply chain.

Non-destructive determination of grass pea and pea flour adulteration in chickpea flour using near-infrared reflectance spectroscopy and chemometrics

BACKGROUND

In order to obtain more economic gains, some food products are adulterated with low-cost substances, if they are toxic, they may pose public health risks. This has called forth the development of quick and non-destructive methods for detection of adulterants in food. Near-infrared reflectance spectroscopy (NIRS) has become a promising tool to detect adulteration in various commodities. We have developed rapid NIRS based analytical methods for quantification of two cheap adulterants (grass pea and pea flour) in a popular Indian food material, chickpea flour.

RESULTS

The NIRS spectra of pure chickpea, pure grass pea, pure pea flour and adulterated samples of chickpea flour with grass pea and pea flour (1-90%) (w/w) were acquired and preprocessed. Calibration models were built based on modified partial least squares regression (MPLSR), partial least squares (PLS), principal component regression (PCR) methods. Based on lowest values of standard error of calibration (SEC) and standard error of cross-validation (SECV), MPLSR-NIRS models were selected. These models exhibited coefficient of determination (R2 ) of 0.999, 0.999, SEC of 0.905, 0.827 and SECV of 1.473, 1.491 for grass pea and pea, respectively. External validation revealed R2 and standard error of prediction (SEP) of 0.999 and 1.184, 0.997 and 1.893 for grass pea and pea flour, respectively.

CONCLUSION

The statistics confirmed that our MPLSR-NIRS based methods are quite robust and applicable to detect grass pea and pea flour adulterants in chickpea flour samples and have potential for use in detecting food fraud. © 2022 Society of Chemical Industry.

Prediction of maize flour adulteration in chickpea flour (besan) using near infrared spectroscopy

The present study was performed to develop Near-infrared spectroscopy based prediction method for the quantification of the maize flour adulteration in chickpea flour. Adulterated samples of Chickpea flour (besan) were prepared by spiking different concentrations of maize flour with pure Chickpea flour in the range of 1–90% (w/w). The spectra of pure Chickpea flour, pure maize flour, and adulterated samples of Chickpea flour with maize flour were acquired as the logarithm of reciprocal of reflectance (log 1/R) in the entire Visible-NIR wavelength range of 400–2498 nm. The acquired spectra were pre-processed by Ist derivative, standard normal variate, and detrending. The calibration models were developed using modified partial least square regression (MPLSR), partial least square regression and principal component regression. The optimal model was selected on the basis of highest values of the coefficient of determination (RSQ), one minus variance ratio (1-VR) and lowest values of standard errors of calibration (SEC), and standard error of cross-validation (SECV). MPLSR model having RSQ and 1-VR value of 0.999 and 0.996 having SEC and SECV value of 1.092 and 2.042 was developed for quantification of maize flour adulteration in chickpea flour. Cross validation and external validation of the developed models resulted in RSQ of 0.999, 0.997 and standard error of prediction of 1.117, and 2.075, respectively.

Impact of Freeze-Drying on the Determination of the Geographical Origin of Almonds (Prunus dulcis Mill.) by Near-Infrared (NIR) Spectroscopy

Near-infrared (NIR) spectroscopy is a proven tool for the determination of food authenticity, mainly because of good classification results and the possibility of industrial use due to its easy and fast application. Since water shows broad absorption bands, the water content of a sample should be as low as possible. Freeze-drying is a commonly used preparatory step for this to reduce the water content in the sample. However, freeze-drying, also known as lyophilization, is very time-consuming impeding the widespread usage of NIR analysis as a rapid method for incoming goods inspections. We used a sample set of 72 almond samples from six economically relevant almond-producing countries to investigate the question of how important lyophilization is to obtain a well-performing classification model. For this approach, the samples were ground and lyophilized for 3 h, 24 h, and 48 h and compared to non-freeze-dried samples. Karl-Fischer titration of non-lyophilized samples showed that water contents ranged from 3.0 to 10.5% and remained constant at 0.36 ± 0.13% after a freeze-drying period of 24 h. The non-freeze-dried samples showed a classification accuracy of 93.9 ± 6.4%, which was in the same range as the samples which were freeze-dried for 3 h (94.2 ± 7.8%), 24 h (92.5 ± 8.7%), and 48 h (95.0 ± 9.0%). Feature selection was performed using the Boruta algorithm, which showed that signals from lipids and proteins are relevant for the origin determination. The presented study showed that samples with low water content, especially nuts, can be analyzed without the time-consuming preparation step of freeze-drying to obtain robust and fast results, which are especially required for incoming goods inspection.

Feasibility study on early identification of freshness decay of fresh-cut kiwifruit during cold chain storage by Fourier transform-near infrared spectroscopy combined with chemometrics

This work mainly aimed to evaluate the feasibility of Fourier transform-near infrared spectroscopy (FT-NIRS) combined with chemometrics in early identification of freshness decay of fresh-cut kiwifruit during simulated cold chain storage, with organoleptic evaluation as a reference. By linear discriminant analysis, the freshness decay could be identified after only 2 days of cold storage, corresponding to freshness level of 3.41 ± 0.27 N (hardness), 0.70 ± 0.05 g/kg (total acid), 8.62 ± 0.06 g/100 g (reducing sugars), 62.04 ± 1.03 mg/100 g (vitamin C) and 2.05 ± 0.11 log₁₀ CFU/g (total plate count). Organoleptic evaluators could not perceive the freshness decay that occurred after 2 days of cold storage. Moreover, the freshness decay could be well quantitatively predicted by partial least squares regression, with low RMSE_p (0.18-05.42) and high R² (0.90-0.96). FT-NIRS appears to be a promising option for early warning of the freshness decay of fresh-cut kiwifruit during cold chain storage, thereby preventing serious spoilage and ensuring fresh fruits for consumers. PRACTICAL APPLICATION: This work is based on the fact that fresh-cut kiwifruit is prone to freshness decay under unstable cold chain conditions, using FT-NIRS combined with chemometrics to identify the freshness decay early and rapidly, to a certain extent, early warn freshness decay and effectively prevent serious spoilage. The technology can be used for food regulatory agencies to monitor the freshness of fresh-cut kiwifruit, and can also be applied for fruit processing enterprises and dealers to ensure the freshness and high quality of fresh-cut kiwifruit.

Near infrared spectroscopy combined with chemometrics for quantitative analysis of corn oil in edible blend oil

In this study, near infrared (NIR) spectroscopy combined with chemometrics was used for the quantitative analysis of corn oil in binary to hexanary edible blend oil. Sesame oil, soybean oil, rice oil, sunflower oil and peanut oil were mixed with corn oil subsequently to form binary, ternary, quaternary, quinary and hexanary blend oil datasets. NIR spectra for the five order blend oil datasets were measured in a transmittance mode in the range of 12000-4000 cm^-1. Partial least square (PLS) was used to build models for the five datasets. Six spectral preprocessing methods and their combinations were investigated to improve the prediction performance. Furthermore, the optimal preprocessing-PLS models were further optimized by uninformative variable elimination (UVE), Monte Carlo uninformative variable elimination (MCUVE) and randomization test (RT) variable selection methods. The optimal models acquire root mean square error of prediction (RMSEP) of 1.7299, 2.2089, 2.3742, 2.5608 and 2.6858 for binary, ternary, quaternary, quinary and hexanary blend oil datasets, respectively. The determination coefficients of prediction set (R²_P) and residual predictive deviations (RPDs) for the five datasets are all above 0.93 and 3. Results show that the prediction accuracy is gradually decreased with the increasing of mixture order of blend oil. However, with proper spectral preprocessing and variable selection, the optimal models present good prediction accuracy even for the higher order blend oil. It demonstrates that NIR technology is feasible for determining the pure oil contents in binary to hexanary blend oil.

Application of spectral features for separating homochromatic foreign matter from mixed congee

•

A method that can separate homochromatic FM in mixed congee was proposed.

•

Spectral features of FM and mixed congee were extracted to build recognition model.

•

The SVM model achieved high identification rates (99.17%) for homochromatic FM.

•

The proposed method is better than computer vision in separating homochromatic FM.

Foreign matter (FM) in mixed congee not only reduces the quality of the congee but may also harm consumers. However, the common computer vision methods with poor recognition ability for the homochromatic FM. This study used hyperspectral reflectance images with the pattern recognition model to detect homochromatic FM on the mixed congee surface. First, spectral features corresponding to homochromatic FM and background were extracted from hyperspectral images. Then, based on the optimal spectral preprocessing method, LDA, K-nearest neighbor, backpropagation artificial neural network, and support vector machine (SVM) were used to classify the spectral features. The results revealed that the SVM model input with raw spectra principal components exhibited optimal identification rates of 99.17%. Finally, most of the pixels for homochromatic FM were classified correctly by using the SVM model. To summarized, hyperspectral images combined with pattern recognition are an effective method for recognizing homochromatic FM in mixed congee.

ATR-FTIR Spectroscopy Combined with Multivariate Analysis Successfully Discriminates Raw Doughs and Baked 3D-Printed Snacks Enriched with Edible Insect Powder

In a preliminary study, commercial insect powders were successfully identified using infrared spectroscopy combined with multivariate analysis. Nonetheless, it is necessary to check if this technology is capable of discriminating, predicting, and quantifying insect species once they are used as an ingredient in food products. The objective of this research was to study the potential of using attenuated total reflection Fourier transform mid-infrared spectroscopy (ATR-FTMIR) combined with multivariate analysis to discriminate doughs and 3D-printed baked snacks, enriched with Alphitobius diaperinus and Locusta migratoria powders. Several doughs were made with a variable amount of insect powder (0–13.9%) replacing the same amount of chickpea flour (46–32%). The spectral data were analyzed using soft independent modeling of class analogy (SIMCA) and partial least squares regression (PLSR) algorithms. SIMCA models successfully discriminated the insect species used to prepare the doughs and snacks. Discrimination was mainly associated with lipids, proteins, and chitin. PLSR models predicted the percentage of insect powder added to the dough and the snacks, with determination coefficients of 0.972, 0.979, and 0.994 and a standard error of prediction of 1.24, 1.08, and 1.90%, respectively. ATR-FTMIR combined with multivariate analysis has a high potential as a new tool in insect product authentication.

An evaluation of IR spectroscopy for authentication of adulterated turmeric powder using pattern recognition

Turmeric powder is a widely consumed spice, making it an attractive target for adulteration, which is not easily detected. The study examined the simultaneous use of IR spectroscopy in combination with controlled (PCA) and uncontrolled (PLS-DA and CMCA) pattern recognition techniques to detect and classify Sudan Red, starch and metanil yellow fraud in turmeric powder nondestructively. The results showed that the two major peaks in turmeric powder at 1625 cm^-1 and 1600 cm^-1 are not present in Sudan Red, starch and metanil yellow because these materials lack this functional group. Data distribution at the two PC locations showed clearly scattered clusters according to the four mixing studied models (turmeric powder, turmeric powder-Sudan Red mixture, turmeric powder-starch mixture and turmeric powder-metanil yellow mixture), but there was a clear overlap between turmeric powder and turmeric powder - Sudan red mixture. Both PLS-DA and SIMCA supervised methods showed satisfactory discrimination. The results also showed that in all the sample groups, when the samples were classified by PLS-DA, the values were higher compared to the SIMCA model. The overall precision of the SIMCA and PLS-DA classifier were 82% and 92%, respectively. However, when considering only two main categories adulterated (the samples at the groups 2, 3 and 4) and pure (the samples at the group 1), an acceptable degree of separation between the resulting classes was obtained. Consequently, IR spectroscopy with pattern recognition methods was found to be a promising tool for nondestructive grouping of turmeric powder samples with different types of adulteration in turmeric powder.

Sequential Data Fusion Techniques for the Authentication of the P.G.I. Senise (“Crusco”) Bell Pepper

Bell pepper is the common name of the berry obtained from some varieties of the Capsicum annuum species. This agro-food is appreciated all over the world and represents one of the key ingredients of several traditional dishes. It is used as a fresh product, or dried and ground as a seasoning (e.g., paprika). Specific varieties of sweet pepper present organoleptic peculiarities and they have been awarded by quality marks as a further confirmation of their unicity (e.g., Piment d’Espelette, Pimiento de Herbón, Peperone di Senise). Due to the market value of this aliment, it can be subjected to frauds, such as adulterations and sophistication. The present study lays on these considerations and aims at developing a spectroscopy-based approach for authenticating Senise bell pepper and for detecting its adulteration with common paprika. In order to achieve this goal, 60 pure samples of bell pepper from Senise were analyzed by mid- and near-infrared spectroscopies. Then, in order to mimic the adulteration, 40 mixtures of Senise bell pepper and paprika were prepared and analyzed (by the same spectroscopic techniques). Eventually, two different multi-block classification approaches (sequential and orthogonalized partial least squares linear discriminant analysis and sequential and orthogonalized covariance selection linear discriminant analysis) were used to discriminate between pure and adulterated Senise bell pepper samples. Both proposed procedures achieved extremely successful results in external validation, correctly classifying all the (thirty-five) test samples, indicating that both approaches represent a winning solution for the investigated classification problem.