Heat denaturation and aggregation of β-lactoglobulin enriched WPI in the presence of arginine HCl, NaCl and guanidinium HCl at pH 4.0 and 7.0

Stabilizing protein pharmaceuticals by imidazolium-type zwitterions

An imidazolium-carboxylate-type zwitterion, OE2imC3C, thermally stabilizes the structure in the vicinity of heme in cytochrome c. However, it remains unclear whether OE2imC3C can thermally stabilize protein pharmaceuticals, which are vulnerable to heating and shaking during production and transportation. In this study, we investigated the stabilization of the entire structure and function of insulin by OE2imC3C. Insulin in the 60 wt% OE2imC3C solution did not aggregate under shaking and heating (1000 rpm and 80 °C) and retained its folded structure. The shaked and heated insulin also exhibited normal function in cell proliferation. In contrast, the secondary structure of insulin in the 40 wt% OE2imC3C solution changed, and insulin in the 20 wt% OE2imC3C solution aggregated after shaking and heating. Therefore, the 60 wt% OE2imC3C solution has potential to stabilize protein pharmaceuticals.

Effects of protein aggregation induced by NaCl and temperature on gelation of silkworm (Antheraea pernyi) pupa raw powder

Edible insects have great potential for producing protein-rich ingredients. This study aimed to investigate the effects of protein aggregation induced by NaCl (0-1 M) and temperature (65-95 °C) on gelation of Antheraea pernyi (A. pernyi) pupa raw powder. No thermal aggregates were observed at low temperature (65 °C), on the basis of there being no significant enhancement in turbidity and particle size (P > 0.05), regardless of NaCl concentrations. At elevated temperatures (75-95 °C), protein solutions exhibited significantly higher turbidity and particle size (P < 0.05), accompanied by an initial rise in surface hydrophobicity followed by a decline, alongside declining sulfhydryl. This marks the beginning of massive thermal aggregation driven by molecular forces. In addition, covalent (disulfide bonds) and non-covalent (hydrogen bonding, electrostatic interactions, and hydrophobicity) forces were influenced by NaCl, leading to variability in the protein aggregation and gelation. Correlation analysis indicates that the higher protein aggregation induced by ions was beneficial to the construction of more compact three-dimensional structures, as well as to the rheology, texture, and water-holding capacity of A. pernyi pupa gels. However, excessive salt ions destroyed the gel structure. Our findings will aid the use of A. pernyi pupae as textural ingredients in formula foods.

Structure and binding ability of self-assembled α-lactalbumin protein nanotubular gels

Partial hydrolysis of whey-based α-lactalbumin (α-La) with Bacillus licheniformis protease (BLP) induces the formation of nanotubular structures in the presence of calcium ions by a self-assembly process. α-La nanotubes (α-LaNTs) exist in the form of regular hollow strands with well-defined average dimensions. The growth of nanotubes induces the formation of stiff transparent protein gels due to the well-arranged networks that the strands can form; these gels can be used for entrapment, transportation, and target delivery of bioactive agents in the industry. High purity of α-La (free of other whey protein fractions) is desirable for nanotube formation; however, pure proteins are very expensive and not practically obtained for industrial applications. Thus, the purpose of this research was to construct α-LaNTs from an α-La preparation with lower purity and to study the gelation phenomena triggered by the self-assembled nanotubes. Some structural features of nanotube gels and their active agent-binding abilities were also investigated. A lower amount of α-LaNTs was observed when low purity α-La was used for nanotube formation. Nanotube growth induced gel formation and higher gel stiffness was obtained when compared to α-La hydrolysates. α-La was denatured after hydrolysis and self-assembly, and remarkable changes were observed in the α-helix and β-sheet domains of α-La structure. Increased intensity in Amide I and II regions indicated potential locations for binding of active agents to α-LaNTs. Whey-based α-La without much purification can be used to produce nanotubular gels and these gels can be considered carrying matrices for active agents in various industrial applications.

Effect of Salt Addition Time on the Nutritional Profile of Thunnus obesus Head Soup and the Formation of Micro/Nano-Sized Particle Structure

In order to investigate the effects of salt on the nutrients and tastes profiles of big eye tuna head soup, the typical nutrients and taste substances were analyzed. The formation and the morphology of micro/nanoparticles (MNPs) were studied using an inverted optical microscope, and the interactions among components in MNPs were studied using a laser scanning confocal microscope. The results showed that the nutrients were dissolved to the maximum in the soup when salt was added at 150 min of cooking. Comparatively, much smaller MNPs with a more stable bilayer were formed at the same salt addition time. Meanwhile, Cl- was found to permeate throughout the core and Na+ bonded with glycosylated molecules, which were dispersed around much smaller MNPs. These results suggested that in addition to promoting the migration of nutrients and taste substances, NaCl also participated in the formation and stability of MNPs in fish head soups.

Use of whey protein soluble aggregates for thermal stability-a hypothesis paper

Forming whey proteins into soluble aggregates is a modification shown to improve or expand the applications in foaming, emulsification, gelation, film-formation, and encapsulation. Whey protein soluble aggregates are defined as aggregates that are intermediates between monomer proteins and an insoluble gel network or precipitate. The conditions under which whey proteins denature and aggregate have been extensively studied and can be used as guiding principles of producing soluble aggregates. These conditions are reviewed for pH, ion type and concentration, cosolutes, and protein concentration, along with heating temperature and duration. Combinations of these conditions can be used to design soluble aggregates with desired physicochemical properties including surface charge, surface hydrophobicity, size, and shape. These properties in turn can be used to obtain target macroscopic properties, such as viscosity, clarity, and stability, of the final product. A proposed approach to designing soluble aggregates with improved thermal stability for beverage applications is presented.

Oil as reaction medium for glycation, oxidation, denaturation, and aggregation of whey protein systems of low water activity

Whey protein isolate (WPI)-oil (75:25) and WPI-oil-(glucose-fructose) (45:15:40) as models of high-protein systems containing either olive (OO) or sunflower oil (SO) were stored at 20 or 40 °C to investigate component interactions. The indicators of protein oxidation (carbonyl content) and aggregation (total sulfhydryl content) and heats of protein denaturation and aggregation were investigated. Highest levels of disulfide bonding and carbonyls in WPI-OO formed during the first 2 weeks of storage concomitantly with enhanced protein aggregation. WPI-OO and WPI-SO systems (prestorage) showed increased protein denaturation temperature. The WPI proteins showed higher heat sensitivity with OO or SO at 40 °C, and the system with OO showed preaggregated protein as found from decreased heats of protein aggregation. OO or SO in WPI-oil-(glucose-fructose) systems reduced heats of protein aggregation. Lipid oxidation products and nonenzymatic browning reactions in glucose-fructose-containing systems decreased the solubility of solids and increased protein aggregation, hydrophobicity, and hardening of structure.

The self-assembly, aggregation and phase transitions of food protein systems in one, two and three dimensions

The aggregation of proteins is of fundamental relevance in a number of daily phenomena, as important and diverse as blood coagulation, medical diseases, or cooking an egg in the kitchen. Colloidal food systems, in particular, are examples that have great significance for protein aggregation, not only for their importance and implications, which touches on everyday life, but also because they allow the limits of the colloidal science analogy to be tested in a much broader window of conditions, such as pH, ionic strength, concentration and temperature. Thus, studying the aggregation and self-assembly of proteins in foods challenges our understanding of these complex systems from both the molecular and statistical physics perspectives. Last but not least, food offers a unique playground to study the aggregation of proteins in three, two and one dimensions, that is to say, in the bulk, at air/water and oil/water interfaces and in protein fibrillation phenomena. In this review we will tackle this very ambitious task in order to discuss the current understanding of protein aggregation in the framework of foods, which is possibly one of the broadest contexts, yet is of tremendous daily relevance.

Nanoscale understanding of thermal aggregation of whey protein pretreated by transglutaminase

Nanoscale structures of whey protein isolate (WPI) pretreated by microbial transglutaminase (mTGase) and subsequent heating were studied in this work and were correlated to zeta-potential, surface hydrophobicity, thermal denaturation properties, and macroscopic turbidity and viscosity. Dispersions of 5% w/v WPI were pretreated by individual or sequential steps of preheating at 80 °C for 15 min and mTGase, used at 2.0-10.2 U/g WPI for 1-15 h, before adjustment of the pH to 7.0 and to 0-100 mM NaCl for heating at 80 °C for 15 and 90 min. The zeta potential and surface hydrophobicity of WPI increased after all pretreatment steps. Preheating increased cross-linking reactivity of WPI by mTGase, corresponding to significantly increased denaturation temperature. Particle size analysis and atomic force microscopy revealed that structures of sequentially pretreated WPI remained stable after heating at 100 mM NaCl, corresponding to transparent dispersions. Conversely, WPI pretreated by one step aggregated at only 100 mM NaCl and resulted in turbid dispersions. Besides reporting a practical approach to produce transparent beverages, nanoscale phenomena in the present study are important for understanding whey protein structures in relevant applications.

Combined effect of heat treatment and ionic strength on the functionality of whey proteins

A 5% (wt/vol) whey protein isolate (WPI) dispersion (pH 6.5) with different concentrations of NaCl was submitted to dynamic heat treatment. Protein dispersions were characterized as to their rheological properties, particle sizes, morphology, denaturation temperatures, and protein surface hydrophobicity. At low ionic strength (<200 mmol/kg), gel elastic modulus increased and strongest gel stiffness was achieved. High salt concentrations lead to a weaker gel, whereas no gels at all were formed without salt. The gelation temperature was also influenced by ionic strength and an increase in denaturation temperature and thermal stability was also observed by using differential scanning calorimetry. Additionally, heat-induced changes in secondary structures upon salt augmentation were followed by Fourier transform infrared spectroscopy. Secondary structural elements estimations obtained from amide I assignments were correlated with those from amide III assignments. Upon salt increase, no differences in secondary structure were observed without heating, whereas upon heating and without salt increase, the Fourier transform infrared spectroscopy data revealed an increase in intermolecular β-sheets at the cost of β-turns and random coils, with no change in α-helical structures. However, NaCl addition along with dynamic heat treatment of WPI dispersion showed a stabilizing effect on the secondary structural elements of both amide I and amide III bands. Whey protein isolate dispersions in water were also characterized by transmission electron microscopy by a spherical shape with 2 populations (6 and 70 nm). Salt increase alone resulted in the formation of denser aggregates, whereas a transition from spherical/compact protein aggregates to linear ones was observed due to combined salt/heat effect. The important size of these edifices was confirmed by microscopy and light-scattering techniques. Moreover, protein surface hydrophobicity related to the number of hydrophobic sites available decreased significantly. Finally, experimental results demonstrated the strong interaction between ionic strength and dynamic thermal treatment on protein functional properties and their careful adjustment could enable the food industry to effectively use WPI as a gelling agent.

Rheological properties of patatin gels compared with β-lactoglobulin, ovalbumin, and glycinin

BACKGROUND

The thermal unfolding and rheological properties of patatin gels were compared with those of commonly used proteins (β-lactoglobulin, ovalbumin, glycinin).

RESULTS

A significant difference between these proteins was observed in both the denaturation temperature (59 °C for patatin; about 20 °C lower than the other proteins) and the onset temperature of gel formation (50-60 °C, compared to 70-85 °C for the other proteins). At low ionic strength the minimal concentration was only 6% (w/v) for patatin, compared to 8-11% for the other proteins. This effect was attributed to the relatively high exposed hydrophobicity of patatin as determined by hydrophobic interaction chromatography. For gels compared at 'iso-strength', the frequency dependence was found to be close to identical, while small differences were observed in the strain at fracture.

CONCLUSIONS

Patatin was found to form gels with comparable small-deformational rheological properties as typical food proteins. In addition, at concentrations where the elastic modulus was similar for all proteins, the frequency and strain dependence were also comparable. From this it is concluded that patatin is a promising protein to be used in food applications as a gelling agent.

Multiscale characterization of individualized beta-lactoglobulin microgels formed upon heat treatment under narrow pH range conditions

Aqueous dispersions of demineralized beta-lactoglobulin (beta-lg) were held at 85 degrees C for 15 min at a constant protein concentration of 1 wt % in the pH range of 3.0-7.0. This led to denatured protein content ranging from 20% (pH 3.0) to 90% (pH 5.0). The protein aggregates formed were characterized as to their stability to sedimentation (turbidity), morphology, size, surface charge, ANS surface hydrophobicity, and content in accessible thiol groups. Additionally, the changes in secondary structures of the protein upon heating were followed by Fourier transform infrared spectroscopy (FTIR). Stable dispersions (no sedimentation for 10 min) of individualized beta-lg microgels were obtained at specific pH 4.6 and 5.8, corresponding to an aggregation yield of about 80%. The width of the pH region leading to these microgels was 0.3 pH unit below or above the two specific pH values. Microgels were characterized by a spherical shape and remarkably low polydispersity in size (<0.2). Their z-average hydrodynamic diameter determined by dynamic light scattering (DLS) was between 160 and 220 nm, and their zeta-potential was +30 or -40 mV, depending on the initial pH before heating. Microgels obtained at pH 4.6 displayed a lower binding capacity for ANS and a lower content of accessible thiol groups as compared to those obtained at pH 5.8. Both types of microgels might therefore differ in their internal and interfacial structures. Between pH 4.6 and 5.8, large sedimenting protein particulates were obtained, whereas soluble aggregates were formed at pH <4.6 or >5.8. Interestingly, DLS experiments showed that before heating, beta-lg was mainly present in an oligomeric state at pH 4.6 and 5.8. This result was confirmed by FTIR measurements indicating the stronger contribution of the 1616-1624 cm(-1) spectral band corresponding to intermolecular beta-sheets in the pH range of 4.0-6.0. Upon heating, FTIR spectroscopy revealed that individualized microgels were obtained under pH conditions where a balance between attractive forces arising from protein unfolding leading to the formation of intermolecular beta-sheets (1616-1624 cm(-1 )band) and the repulsive electrostatic forces due to the initial protein net charge was achieved.

Whey protein soluble aggregates from heating with NaCl: physicochemical, interfacial, and foaming properties

Whey protein isolate was heat-treated at 85 degrees C for 15 min at pH ranging from 6.0 to 7.0 in the presence of NaCl in order to generate the highest possible amount of soluble aggregates before insolubility occurred. These whey protein soluble aggregates were characterized for composition, hydrodynamic diameter, apparent molecular weight, zeta-potential, surface hydrophobicity index, activated thiol group content, and microstructure. The adsorption kinetics and rheological properties (E', etad) of these soluble aggregates were probed at the air/water interface. In addition, the gas permeability of a single bubble stabilized by the whey protein soluble aggregates was determined. Finally, the foaming and foam-stabilizing properties of these aggregates were measured. The amount of whey protein soluble aggregates after heat treatment was increased from 75% to 95% from pH 6.0 to pH 7.0 by addition of 5 mM to 120 mM NaCl, respectively. These soluble aggregates involved major whey protein fractions and exhibited a maximum of activated thiol group content at pH > 6.6. The hydrodynamic radius and the surface hydrophobicity index of the soluble aggregates increased from pH 6.0 to 7.0, but the molecular weight and zeta-potential decreased. This loss of apparent density was clearly confirmed by microscopy as the soluble aggregates shifted from a spherical/compact structure at pH 6.0 to a more fibrillar/elongated structure at pH 7.0. Surface adsorption was faster for soluble aggregates formed at pH 6.8 and 7.0 in the presence of 100 and 120 mM NaCl, respectively. However, interfacial elasticity and viscosity measured at 0.01 Hz were similar from pH 6.0 to 7.0. Single bubble gas permeability significantly decreased for aggregates generated at pH > 6.6. Furthermore, these aggregates exhibited the highest foamability and foam liquid stability. Air bubble size within the foam was the lowest at pH 7.0. The coarsening exponent, alpha, fell within predicted values of 1/3 and 1/2, except for very dry foams where it was 1/5.