Spontaneous gelation of wheat gluten proteins in a food grade solvent

Insight into Sequential Extrusion and Cysteine Treatment for Improving Rheological Characteristics and In Vitro Digestibility of Whey Protein Isolate

The effects of sequential cold extrusion and cysteine (Cys) treatment on the rheological characteristics and in vitro digestibility of whey protein isolate (WPI) were researched in this work. Cold extrusion and Cys treatment increased the apparent viscosity, shear stress, Péclet number, and viscoelasticity of WPI. Furthermore, the emulsifying activity index enhanced in the order of WPI, Cys-treated WPI (Cys-WPI), cold-extruded WPI (CWPI), and extrusion-Cys treated WPI (Cys-CWPI). The emulsion stability index of Cys-CWPI was increased by 29.69% higher than that of WPI. Besides, the α-glucosidase inhibitory rate and xanthine oxidase inhibitory activity in the digests of Cys-CWPI were markedly increased compared with digests of WPI. The synergism of cold extrusion and Cys provides an effective approach for the application of whey protein-based thickeners and emulsifiers; meanwhile, its digestive products may assist in the development of hypoglycemic and uric acid-lowering foods.

Scaling Properties of Gelling Systems in Nonlinear Shear Experiments

We study model near-critical polymer gelling systems made of gluten protein dispersions stabilized at different distances from the gel point. We impose different shear rates and follow the time evolution of the stress. For sufficiently large shear rates, an intermediate stress overshoot is measured before reaching the steady state. We evidence self-similarity of the stress overshoot as a function of the applied shear rate for samples with various distances from the gel point, which is related to the elastic energy stored by the samples, as for dense systems close to the jamming transition. In concordance with the findings for glassy and jammed systems, we also measure that the stress after flow cessation decreases as a power law with time, with a characteristic relaxation time that depends on the shear rate previously imposed. These features revealed in nonlinear rheology could be the signature of a mesoscopic dynamics, which would depend on the extent of gelation.

Delicate Analysis of Interacting Proteins and Their Assemblies by Flow Field-Flow Fractionation Techniques

We study the efficiency of several asymmetrical flow field-flow fractionation (AF4) techniques to investigate self-associating wheat gluten proteins. We compare the use of a denaturing buffer including sodium dodecyl sulfate (SDS) and a mild chaotropic solvent, water/ethanol, as the eluent, on a model gluten sample. Through a thorough analysis of the data obtained from coupled light scattering detectors and with the identification of molecular composition of the eluted protein, we evidence coelution events in several conditions. We show that the focus step used in conventional AF4 with the SDS buffer leads to the formation of aggregates that coelute with monomeric proteins. By contrast, a frit-inlet device enables the fractionation of individual wheat proteins in the SDS buffer. Interestingly conventional AF4, using water/ethanol as eluent, is an effective method for fractionating gluten proteins and their complex dynamic assemblies, which involve weak forces and are composed of both monomeric and polymeric proteins.

Upcycling imperfect broccoli and carrots into healthy snacks using an innovative 3D food printing approach

Vegetables are healthy foods with nutritional benefits; however, nearly one-third of the world's vegetables are lost each year, and some of the losses happen due to the imperfect shape of the vegetables. In this study, imperfect vegetables (i.e., broccoli and carrots) were upcycled into freeze-dried powders to improve their shelf-life before they were formed into food inks for 3D printing. The rheology of the food inks, color analysis of the uncooked and cooked designs, and texture analysis of the cooked designs were determined. The inks with 50% and 75% vegetables provided the best printability and shape fidelity. 3D printing at these conditions retained a volume comparable to the digital file (14.4 and 14.3 cm3 vs. 14.6 cm3, respectively). The control, a wheat flour-based formulation, showed the lowest level of stability after 3D printing. The viscosity results showed that all the food inks displayed shear-thinning behavior, with broccoli having the greatest effect on viscosity. There was a significant color difference between uncooked and cooked samples, as well as between different formulations. The hardness of the baked 3D-printed samples was affected by the type and content of vegetable powders, where carrot-based snacks were notably harder than snacks containing broccoli. Overall, the results show that 3D food printing can be potentially used to reduce the loss and waste of imperfect vegetables.

Versatile wheat gluten: functional properties and application in the food-related industry

Gluten is a key component that allows wheat flour to form a dough, and it is also a byproduct of the production of wheat starch. As a commercial product, wheat gluten is increasingly used in the food-related industry because of its versatile functional properties and wide range of sources. Wheat gluten is manufactured industrially on a large scale through the Martin process and batter process and variants thereof. Gliadin and glutenin impart cohesiveness and elasticity properties, respectively, to wheat gluten. The formation of gluten networks and polymers depends mainly on covalent bonds (disulfide bonds) and noncovalent bonds (ionic bonds, hydrogen bonds, and hydrophobic interactions). The multifunctional properties (viscoelasticity, gelation, foamability, etc.) of wheat gluten are shown by rehydration and other processing techniques. Wheat gluten has been widely used in wheat-based products, food auxiliary agents, food packaging, encapsulation and release of food functional ingredients, food adsorption and heat insulation materials, special purpose foods, and versatile applications. In the future, wheat gluten protein will be used as an important raw material to participate in the development and preparation of various food and degradable materials, and the application potential of wheat gluten in food-related industries will be massive. This review summarizes the main manufacturing processes, composition, and structure of gluten protein, and the various functional properties that support its application in the food and related industries.

Impact of the protein composition on the structure and viscoelasticity of polymer-like gluten gels

We investigate the structure of gluten polymer-like gels in a binary mixture of water/ethanol, 50/50 v/v, a good solvent for gluten proteins. Gluten comprises two main families of proteins, monomeric gliadins and polymer glutenins. In the semi-dilute regime, scattering experiments highlight two classes of behavior, akin to standard polymer solution and polymer gel, depending on the protein composition. We demonstrate that these two classes are encoded in the structural features of the proteins in very dilute solution, and are correlated with the presence of proteins assemblies of typical size tens of nanometers. The assemblies only exist when the protein mixture is sufficiently enriched in glutenins. They are found directly associated to the presence in the gel of domains enriched in non-exchangeable H-bonds and of size comparable to that of the protein assemblies. The domains are probed in neutron scattering experiments thanks to their unique contrast. We show that the sample visco-elasticity is also directly correlated to the quantity of domains enriched in H-bonds, showing the key role of H-bonds in ruling the visco-elasticity of polymer gluten gels.

Chemical modifications and their effects on gluten protein: An extensive review

Gluten protein as one of the plant resources is susceptible to genetic, physical, chemical, enzymatic and engineering modifications. Chemical modifications have myriad advantages over other treatments, including short reaction times, low cost, no requirement for specialized equipment, and highly clear modification effects. Therefore, chemical modification of gluten can be mainly conducted via acylation, glycosylation, phosphorylation, and deamidation. The present review investigated the impact of different chemical compounds on conformations of gluten and its subunits. Moreover, their effects on the physico-chemical, morphological, and rheological properties of gluten and their subunits were studied. This allows for the use of gluten for a variety of purposes in the food and non-food industry.

Phase separation dynamics of gluten protein mixtures

We investigate by time-resolved synchrotron ultra-small X-ray scattering the dynamics of liquid-liquid phase-separation (LLPS) of gluten protein suspensions following a temperature quench. Samples at a fixed concentration (237 mg ml^-1) but with different protein compositions are investigated. In our experimental conditions, we show that fluid viscoelastic samples depleted in polymeric glutenin phase-separate following a spinodal decomposition process. We quantitatively probe the late stage coarsening that results from a competition between thermodynamics that speeds up the coarsening rate as the quench depth increases and transport that slows down the rate. For even deeper quenches, the even higher viscoelasticity of the continuous phase leads to a "quasi" arrested phase separation. Anomalous phase-separation dynamics is by contrast measured for a gel sample rich in glutenin, due to elastic constraints. This work illustrates the role of viscoelasticity in the dynamics of LLPS in protein dispersions.

Preparation and characterization of redox-sensitive glutenin nanoparticles

In recent thirty years, protein-based nanoparticles have attracted considerable attention, and they are being widely used in the food, pharmaceutical, and biomedical fields. Wheat glutenin, an important natural vegetable protein, has been demonstrated to be nutritive and biocompatible. This study aimed to develop a new type of redox-sensitive protein nanoparticles. The glutenin nanoparticles (GNPs) were synthesized with glutenin concentrations (0.082%, 0.5%, and 0.83%) through the adoption of an antisolvent titration technique and the use of hydrogen peroxide (H₂O₂) oxidative cross-linking for different periods. At a glutenin concentration of 0.83% and oxidation time of 20 h, the obtained GNPs were spherical in shape and approximately 100-300 nm in size, as measured by transmission electron microscopy and dynamic light scattering. The formation of disulfide was confirmed by Raman spectroscopy. The turbidity values of the GNP suspensions were decreased by half after the addition of β-mercaptoethanol. Nile blue A, a model hydrophilic substance, was entrapped in the GNPs with 77.67% loading efficiency. The newly developed GNPs can be used as redox-responsive carriers for delivering hydrophilic active substances.

Development of Self-Healing Double-Network Hydrogels: Enhancement of the Strength of Wheat Gluten Hydrogels by In Situ Metal-Catechol Coordination

Wheat gluten, a byproduct of the wheat starch industry, is widely used as a dough strengthener and gelling agent. In this research, we developed novel double-network hydrogels by gelation of gluten using in situ metal-catechol coordination. The first network consisted of physically associated gluten molecules, while the second network consisted of Fe³⁺-cross-linked proanthocyanidins (PACs). Dynamic shear rheology experiments suggested that coordination of Fe³⁺ and PACs greatly enhanced the mechanical properties of the gluten hydrogels. The double-network hydrogels exhibited a 3-fold higher shear modulus than pure gluten hydrogels. The formation of bis- and tris-catechol-Fe³⁺ complexes between Fe³⁺ and PACs in the hydrogels was confirmed by ultraviolet-visible spectrometry and isothermal titration calorimetry (ITC). The ITC measurements of Fe³⁺ binding to PACs indicated a molar stoichiometry of 1:4 and a dissociation constant ( K_D) of 24.9 × 10^-9. When subject to repeated shear deformation-compression cycles, the hydrogels exhibited strong and rapid recovery of their rheological properties. The strong, self-healing characteristics of the double-network gluten hydrogels produced in this study may be useful for certain applications in the food, agriculture, biomedicine, and tissue-engineering industries.

Soft-Matter Approaches for Controlling Food Protein Interactions and Assembly

Animal- and plant-based proteins are present in a wide variety of raw and processed foods. They play an important role in determining the final structure of food matrices. Food proteins are diverse in terms of their biological origin, molecular structure, and supramolecular assembly. This diversity has led to segmented experimental studies that typically focus on one or two proteins but hinder a more general understanding of food protein structuring as a whole. In this review, we propose a unified view of how soft-matter physics can be used to control food protein assembly. We discuss physical models from polymer and colloidal science that best describe and predict the phase behavior of proteins. We explore the occurrence of phase transitions along two axes: increasing protein concentration and increasing molecular attraction. This review provides new perspectives on the link between the interactions, phase transitions, and assembly of proteins that can help in designing new food products and innovative food processing operations.

Recent Advances in Edible Polymer Based Hydrogels as a Sustainable Alternative to Conventional Polymers

The over increasing demand of eco-friendly materials to counter various problems, such as environmental issues, economics, sustainability, biodegradability, and biocompatibility, open up new fields of research highly focusing on nature-based products. Edible polymer based materials mainly consisting of polysaccharides, proteins, and lipids could be a prospective contender to handle such problems. Hydrogels based on edible polymer offer many valuable properties compared to their synthetic counterparts. Edible polymers can contribute to the reduction of environmental contamination, advance recyclability, provide sustainability, and thereby increase its applicability along with providing environmentally benign products. This review is highly emphasizing on toward the development of hydrogels from edible polymer, their classification, properties, chemical modification, and their potential applications. The application of edible polymer hydrogels covers many areas including the food industry, agricultural applications, drug delivery to tissue engineering in the biomedical field and provide more safe and attractive products in the pharmaceutical, agricultural, and environmental fields, etc.

Introduction to soft matter and neutron scattering

As an opening lecture to the French-Swedish neutron scattering school held in Uppsala (6th to 9th of December 2016), the basic concepts of both soft matter science and neutron scattering are introduced. Typical soft matter systems like self-assembled surfactants in water, microemulsions, (co-)polymers, and colloids are presented. It will be shown that widely different systems have a common underlying physics dominated by the thermal energy, with astonishing consequences on their statistical thermodynamics, and ultimately rheological properties – namely softness. In the second part, the fundamentals of neutron scattering techniques and in particular small-angle neutron scattering as a powerful method to characterize soft matter systems will be outlined.

Small angle neutron scattering contrast variation reveals heterogeneities of interactions in protein gels

We propose a quantitative approach to probe the spatial heterogeneities of interactions in macromolecular gels, based on a combination of small angle X-ray (SAXS) and neutrons (SANS) scattering. We investigate the structure of model gluten protein gels and show that the gels display radically different SAXS and SANS profiles when the solvent is (at least partially) deuterated. The detailed analysis of the SANS signal as a function of the solvent deuteration demonstrates heterogeneities of sample deuteration at different length scales. The progressive exchange between the protons (H) of the proteins and the deuteriums (D) of the solvent is inhomogeneous and 60 nm large zones that are enriched in H are evidenced. In addition, at low protein concentration, in the sol state, solvent deuteration induces a liquid/liquid phase separation. Complementary biochemical and structure analyses show that the denser protein phase is more protonated and specifically enriched in glutenin, the polymeric fraction of gluten proteins. These findings suggest that the presence of H-rich zones in gluten gels would arise from the preferential interaction of glutenin polymers through a tight network of non-exchangeable intermolecular hydrogen bonds.