Comparative study on properties of edible films based on pinhão (Araucaria angustifolia) starch and flour

Structural, Thermal, Rheological, and Morphological Characterization of the Starches of Sweet and Bitter Native Potatoes Grown in the Andean Region

This study aimed to extract and characterize the morphological, physicochemical, thermal, and rheological properties of the starches of native potatoes grown in the department of Puno. Among the varieties evaluated were sweet native potato varieties Imilla Negra (Solanum tuberosum spp. Andígena), Imilla Blanca (Solanum tuberosum spp. Andígena), Peruanita, Albina or Lomo (Solanum chaucha), and Sutamari, and the bitter potatoes Rucki or Luki (Solanum juzepczukii Buk), Locka (Solanum curtilobum), Piñaza (Solanum curtilobum), and Ocucuri (Sola-num curtilobum), acquired from the National Institute of Agrarian Innovation (INIA-Puno). The proximal composition, amylose content, and morphological, thermal, and rheological properties that SEM, DSC, and a rheometer determined, respectively, were evaluated, and the data obtained were statistically analyzed using a completely randomized design and then a comparison of means using Tukey's LSD test. The results show a significant difference in the proximal composition (p ≤ 0.05) concerning moisture content, proteins, fat, ash, and carbohydrates. Thus, the amylose content was also determined, ranging from 23.60 ± 0.10 to 30.33 ± 0.15%. The size morphology of the granules is 13.09-47.73 µm; for the thermal and rheological properties of the different varieties of potato starch, it is shown that the gelatinization temperature is in a range of 57 to 62 °C and, for enthalpy, between 3 and 5 J/g.

Functional properties and in vitro starch digestibility of infrared-treated (micronized) green banana flour

BACKGROUND

The consumption of green banana flour (GBF) products has been linked to reduced glycemic index (GI) and low risk of type 2 diabetes and obesity. The purpose of this study was to investigate the effect of micronization (high-intensity infrared heating method) on the molecular, microstructure and in vitro starch digestibility of five GBF cultivars grown in South Africa. The GBF was micronized at three surface temperatures (90, 120 and 150 °C for 30 min) and the in vitro starch digestibility was determined with Megazyme kits.

RESULTS

Micronization at the highest temperature (150 °C) increased the swelling power by 6.00% in all five GBF cultivars when compared to control (unmicronized GBF). Micronization slightly reduced the resistant starch (RS) of the GBF cultivars by up to 8.63%. The FHIA-01 cultivar showed the highest RS (86.50%), whereas Grande Naine - 150 °C cultivar had the lowest RS (76.00%). Both micronized and control GBF exhibited similar X-ray diffraction patterns with all cultivars and at all micronization temperatures. Similarly, the functional properties of the GBF were not altered by micronization when observed with Fourier transform infrared spectroscopy. Scanning electron microscopy showed changes in the surface morphology of starch granules after micronization and these were dependent on temperature.

CONCLUSION

Overall, micronization at 120 °C showed the best improvement in functional properties of GBF and this makes it suitable for potential application for the manufacture of instant breakfast products, baked goods and pasta. In addition, the micronized GBF cultivars retained high RS, suggesting potential health benefits for people with diabetes and obesity. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

A Comprehensive Review of Biodegradable Polymer-Based Films and Coatings and Their Food Packaging Applications

Food sectors are facing issues as a result of food scarcity, which is exacerbated by rising populations and demand for food. Food is ordinarily wrapped and packaged using petroleum-based plastics such as polyethylene, polyvinyl chloride, and others. However, the excessive use of these polymers has environmental and health risks. As a result, much research is currently focused on the use of bio-based materials for food packaging. Biodegradable polymers that are compatible with food products are used to make edible packaging materials. These can be ingested with food and provide consumers with additional health benefits. Recent research has shifted its focus to multilayer coatings and films-based food packaging, which can provide a material with additional distinct features. The aim of this review article is to investigate the properties and applications of several bio-based polymers in food packaging. The several types of edible film and coating production technologies are also covered separately. Furthermore, the use of edible films and coatings in the food industry has been examined, and their advantages over traditional materials are also discussed.

Effect of Psyllium Husk Addition on the Structural and Physical Properties of Biodegradable Thermoplastic Starch Film

The research subject was the analysis of the microstructure, barrier properties, and mechanical resistance of the psyllium husk (PH)-modified thermoplastic starch films. The tensile tests under various static loading conditions were not performed by researchers for this type of material before and are essential for a more precise assessment of the material’s behavior under the conditions of its subsequent use. The film samples were manufactured by the casting method. PH addition improved starch gelatinization and caused a decrease in failure strain by 86% and an increase in failure stress by 48% compared to pure films. Fourier transform infrared spectroscopy results showed the formation of additional hydrogen bonds between polysaccharides in starch and PH. An increase in the number of hydrophilic groups in the modified films resulted in a faster contact angle decrease (27.4% compared to 12.8% for pure ones within the first 5 s); however, it increased the energy of water binding and surface complexity. The modified films showed the opacity at 600 nm, 43% higher than in the pure starch film, and lower transmittance, suggesting effectively improving barrier properties to UV light, a potent lipid-oxidizing agent in food systems.

Agar Biopolymer Films for Biodegradable Packaging: A Reference Dataset for Exploring the Limits of Mechanical Performance

This article focuses on agar biopolymer films that offer promise for developing biodegradable packaging, an important solution for reducing plastics pollution. At present there is a lack of data on the mechanical performance of agar biopolymer films using a simple plasticizer. This study takes a Design of Experiments approach to analyze how agar-glycerin biopolymer films perform across a range of ingredients concentrations in terms of their strength, elasticity, and ductility. Our results demonstrate that by systematically varying the quantity of agar and glycerin, tensile properties can be achieved that are comparable to agar-based materials with more complex formulations. Not only does our study significantly broaden the amount of data available on the range of mechanical performance that can be achieved with simple agar biopolymer films, but the data can also be used to guide further optimization efforts that start with a basic formulation that performs well on certain property dimensions. We also find that select formulations have similar tensile properties to thermoplastic starch (TPS), acrylonitrile butadiene styrene (ABS), and polypropylene (PP), indicating potential suitability for select packaging applications. We use our experimental dataset to train a neural network regression model that predicts the Young's modulus, ultimate tensile strength, and elongation at break of agar biopolymer films given their composition. Our findings support the development of further data-driven design and fabrication workflows.

Microstructural and physicochemical properties of biodegradable films developed from false banana (Ensete ventricosum) starch

The recent trend in starch research is the exploration of potential applications of starches from under-utilized sources. Properties of edible biodegradable films developed from ensete ‘false banana’ (Ensete ventricosum) starch with glycerol as plasticizer were evaluated in this study. Microstructural examination revealed presence of pores which were gaining prominence with increasing glycerol content while FTIR analysis showed the presence of protein groups characteristic bands and existence of interactions between molecules (glycerol, starch, amide groups and water) in the polymerics. These revelations have profound effect on functional, mechanical and optical properties of the films. Thickness (156.70–189.00 μm), density (1.95–2.44 g/cm³), swelling power (84.49–102.26%), water solubility (17.07–22.32%), water vapor permeability (1.40 × 10⁻⁸-1.98 × 10⁻⁸ g/m s Pa), lightness ‘l∗’ (39.01–43.86) and energy difference (39.02–43.87) of the film were increasing with increasing glycerol content. The increase was significant (p < 0.05) with swelling power and water solubility, while puncture force (570.83–252.90 g) and film transparency (78.17–51.65%) decreased significantly (p < 0.05) with increasing glycerol content. X-ray diffraction revealed combination of C-type and processing induced V_H diffraction patterns. The results of this study exposed the promising potential of ensete starch for development of films and coatings for different packaging requirements.

Development and characterization of a novel multifunctional film based on wheat filter flour incorporated with carvacrol: Antibacterial, antifungal, and insecticidal potentials

Wheat filter flour is a by-product derived from the modern wheat milling process. In this study, the influence of plasticizer type (glycerol (G) and sorbitol (S)) and content (25, 35, and 45 g/100 g polymer) on the wheat filter flour-based film was evaluated. Regardless of plasticizer type, increasing the plasticizer content enhanced moisture content, water solubility, and water vapor permeability of film samples. The S-plasticized films presented the greatest tensile strength and the lowest EAB%. The scanning electron microscope observations confirmed the uniform structure of G-plasticized film. Moreover, antimicrobial and physico-mechanical properties of G-plasticized (25%) film were evaluated at the presence of carvacrol (5 and 10 g/100 g polymer). The considerable improvement was achieved in water affinity (14.2%) and flexibility (8.6%) by incorporating 10% carvacrol in G-plasticized films. The greatest inhibitory properties of active wheat filter flour films were observed against Aspergillus niger. By increasing the carvacrol concentration in film-forming solution, the inhibitory activity against Listeria monocytogenes and Escherichia coli in the liquid food model system was increased by 90.3% and 66.95%, respectively. Moreover, the active wheat filter flour-based film released a considerable insecticidal activity against Sitophilus granarius and Tribolium confusum. This work offers a novel utilization of wheat filter flour as an inexpensive blend polymer to manufacture multifunctional active film, which provides a promising approach for pest management besides enhancing the safety of products.

Optimization of wheat flour by product films: A technological and sustainable approach for bio-based packaging material

This study aimed to evaluate the feasibility of the production of sustainable and biodegradable packages made from a little-explored by product of wheat-milling, the glue flour (GF). Films were produced by the casting method and the effect of the incorporation of glycerol, sorbitol, and GF in the properties of the films was investigated following the central composite rotational design (CCRD) approach. The results have been statistically analyzed by the response surface methodology and the desirability function. Due to the rich composition in amylaceous reserve (64.81%; 26% of amylose content), considerable protein content (11.23%), and fibers (8.28%), the GF proved to be suitable for use as a matrix in biopolymer films. All the properties were mainly influenced by the plasticizer type and GF concentration. Film plasticized with glycerol (run 13) was more flexible, had higher moisture (28.39%) content, and was more adhesive than the formulation made with sorbitol (run 11). Film elongation (ELO) ranged from 25.84% to 56.71%, and tensile strength (TS) from 0.10 to 2.8 MPa. The optimized process conditions were 8% for Cf, 0% for Cg, and 4% for Cs. Under these conditions, the films presented low moisture (12.1%), moderate solubility (35.5%) and TS (1.64 MPa), and high ELO (72.06%). This study showed that GF is a promising source for the development of biodegradable films. PRACTICAL APPLICATION: Films made from a by product of wheat flour (glue flour) have technological potential to be used as packaging for food products. The valorization of a by product of the agribusiness without pre-treatment for the production of biodegradable films was made possible. The study by casting technique is a previous for scale-up production.

Thermoplastic starch blown films with improved mechanical and barrier properties

The development and production of thermoplastic starch (TPS) films based on blown film extrusion have been spurred by increasing interest in renewable resources and an alternative solution to meet industrial-scale demand. The chemical structure of the plasticizer and its proportion have a significant effect on the mechanical and barrier properties of TPS films. Therefore, this research aims to evaluate the influence of plasticizer type and content on the performance of TPS blown films. TPS films were prepared by mixing cassava starch with three types of plasticizer, i.e. glycerol, glycerol/xylitol, and glycerol/sorbitol with a weight ratio of 1:1. The quantity of plasticizer varied among 38, 40, and 42 parts per hundred parts of starch. Although TPS films plasticized with the small-sized plasticizer glycerol were easily processed and extensible, the surface stickiness leading to single-wall films, low tensile strength, and poor water vapor barrier properties would limit their use. By replacing glycerol with larger-sized plasticizers such as xylitol or sorbitol, the films exhibited reduced stickiness and separable double walls and showed improved tensile strength, stiffness, and water vapor and oxygen barrier properties. The obtained TPS blown films offer potential applications as edible films for food and pharmaceutical products.

Advantages and Disadvantages of Bioplastics Production from Starch and Lignocellulosic Components

The accumulation of plastic wastes in different environments has become a topic of major concern over the past decades; therefore, technologies and strategies aimed at mitigating the environmental impacts of petroleum products have gained worldwide relevance. In this scenario, the production of bioplastics mainly from polysaccharides such as starch is a growing strategy and a field of intense research. The use of plasticizers, the preparation of blends, and the reinforcement of bioplastics with lignocellulosic components have shown promising and environmentally safe alternatives for overcoming the limitations of bioplastics, mainly due to the availability, biodegradability, and biocompatibility of such resources. This review addresses the production of bioplastics composed of polysaccharides from plant biomass and its advantages and disadvantages.

Development and Characterization of Novel Composite Films Based on Soy Protein Isolate and Oilseed Flours

The possibility of using oilseed flours as a waste source for film-forming materials with a combination of soy protein isolate in preparation of edible films was evaluated. Physical, mechanical and barrier properties were determined as a function of the oilseed type: hemp, evening primrose, flax, pumpkin, sesame and sunflower. It was observed that the addition of oilseed flours increased the refraction and thus the opacity of the obtained films from 1.27 to 9.57 A mm⁻¹. Depending on the type of flours used, the edible films took on various colors. Lightness (L*) was lowest for the evening primrose film (L* = 34.91) and highest for the soy protein film (L* = 91.84). Parameter a* was lowest for the sunflower film (a* = −5.13) and highest for the flax film (a* = 13.62). Edible films made of pumpkin seed flour had the highest value of the b* color parameter (b* = 34.40), while films made of evening primrose flour had the lowest value (b* = 1.35). All analyzed films had relatively low mechanical resistance, with tensile strength from 0.60 to 3.09 MPa. Films made of flour containing the highest amount of protein, pumpkin and sesame, had the highest water vapor permeability, 2.41 and 2.70 × 10⁻⁹ g·m⁻¹ s⁻¹ Pa⁻¹, respectively. All the edible films obtained had high water swelling values from 131.10 to 362.16%, and the microstructure of the films changed after adding the flour, from homogeneous and smooth to rough. All blended soy protein isolate–oilseed flour films showed lower thermal stability which was better observed at the first and second stages of thermogravimetric analysis when degradation occurred at lower temperatures. The oilseed flours blended with soy protein isolate show the possibility of using them in the development of biodegradable films which can find practical application in the food industry.

Properties of Banana (Cavendish spp.) Starch Film Incorporated with Banana Peel Extract and Its Application

The objective of this study was to develop an active banana starch film (BSF) incorporated with banana peel extract. We compared the film’s properties with commercial wrap film (polyvinyl chloride; PVC). Moreover, a comparison of the quality of minced pork wrapped during refrigerated storage (7 days at ±4 °C) was also performed. The BSF with different concentrations of banana peel extract (0, 1, 3, and 5 (%, w/v)) showed low mechanical properties (tensile strength (TS): 4.43–31.20 MPa and elongation at break (EAB): 9.66–15.63%) and water vapor permeability (3.74–11.0 × 10⁻¹⁰ g mm/sm² Pa). The BSF showed low film solubility (26–41%), but excellent barrier properties to UV light. The BSF had a thickness range of 0.030–0.047 mm, and color attributes were: L* = 49.6–51.1, a* = 0.21–0.43, b* = 1.26–1.49. The BSF incorporated with banana peel extracts 5 (%, w/v) showed the highest radical scavenging activity (97.9%) and inhibitory activity of E. coli O157: H7. The BSF showed some properties comparable to the commercial PVC wrap film. Changes in qualities of minced pork were determined for 7 days during storage at ±4 °C. It was found that thiobarbituric acid reactive substances (TBARS) of the sample wrapped with the BSF decreased compared to that wrapped with the PVC. The successful inhibition of lipid oxidation in the minced pork was possible with the BSF. The BSF incorporated with banana peel extract could maintain the quality of minced pork in terms of oxidation retardation.

Aerogels based on corn starch as carriers for pinhão coat extract (Araucaria angustifolia) rich in phenolic compounds for active packaging

The objective of this study was to produce renewable aerogels from native and anionic corn starches loaded with pinhão coat extract (PCE) with water absorbent capacity, antioxidant activity and controlled release of phenolic compounds in a hydrophilic food simulant media. Starch aerogels were produced with different concentrations of PCE, 5 and 10%, and evaluated for FT-IR spectra, relative crystallinity, thermal properties, water absorption capacity (WAC), density, antioxidant activity and in vitro release. Thermal stability of the compounds was improved by the incorporation of PCE. The aerogels presented high WAC of 541 to 731% and low-density values of 0.03 g.cm^-1. The highest inhibition of DPPH and ABTS radicals was presented to anionic starch aerogels with 10% PCE rendering 26% of inhibition of ABTS and 24% of DPPH. The maximum in vitro releases for native and anionic starch aerogels with 5% of PCE were 28.70 and 29.44%, respectively, and for aerogels with 10% of PCE they were 34.27 and 35.94%, respectively. The anionic starch aerogels had the highest amount of phenolic compounds released when compared to the native starch aerogels. The starch-based bioactive aerogels showed potential to be applied in food packaging as water absorbent and as a carrier of phenolic compounds.

Sunflower oil preservation by using chickpea flour film as bio-packaging material

The aim of this study was to evaluate the protective effect of biodegradable packages made with chickpea flour on the oxidation of sunflower oil. Chickpea flour films were prepared using the casting technique. To study the influence of storage time on films properties, the chickpea flour films were stored during 60 days at 25 °C and 52% relative humidity. In addition, sunflower oil samples were packaged in chickpea flour packages (CPs) and stored for 60 days at 25 °C. Lipid oxidation indicators were evaluated. The results showed that puncture force and redness values (a*) of chickpea films did not change significantly during storage. Tensile strength, Young's modulus (YM), and yellowness (b*) increased and moisture content (MC), elongation (%E), solubility (%S), water vapor permeability (WVP), and luminosity (L*) decreased. Microscopic images showed the presence of a few cracks in the film network at storage day 60. Conjugated dienes and peroxide value increased less for sunflower oil stored in high-barrier plastic pouches and CPs during storage than the control treatment. CPs helped to preserve the chemical quality of sunflower oil samples, proving to be a promising alternative to develop biodegradable packaging to be used in oily food preservation. PRACTICAL APPLICATION: Discarded chickpea grains are those split and different color grains that are separated from marketable grains, and represent an industrial byproduct. These grains are currently used for feed, constituting a nutritive biomass of low commercial value. Chickpea flour is a potential material for making biodegradable films. This strategy allows adding value to the chickpea industry, transforming a byproduct into a raw material with the potential to develop economical food packaging material. The use of chickpea packages to preserve sunflower oil may be an alternative to pack vegetable oil or high lipid content food, allowing the use reduction of nonbiodegradable pouches.

Novel Materials in the Preparation of Edible Films and Coatings—A Review

The development of edible films and coatings has seen remarkable growth in recent decades and is expected to have an important impact on the quality of food products in the coming years. This growth is attributed to the increasing knowledge of edible films and edible coating technology, as well as advances in material science and processing technology. Packaging is used in order to reduce synthetic packaging and can play a role as an eco-friendly biodegradable package or a protective coating on the food surface. A large amount of bio-based polymers have been used in the production of edible films and coatings. Novel sources of edible materials, as well as the novel processing techniques, are a subject of great interest due to their promising potential as innovative food packaging systems. This paper presents the concept and potential for application of new film-forming materials and management of food wastes from the fruit and vegetable industry, which can encounter problems in appropriate disposal. It summarizes the extensive knowledge about the new film-forming materials such as plant residues, flours and gums to show their protective effectiveness and suitability in various types of foods.

Effects of oligosaccharides on particle structure, pasting and thermal properties of wheat starch granules under different freezing temperatures

The effects of fructooligosaccharides (FOS), galactooligosaccharides (GOS), and xylooligosaccharides (XOS) on gelatinization, retrogradation, thermal properties and particle size of wheat starch at different freezing temperatures were studied. The results showed that the wheat starch porosity, particle size, peak viscosity increased with increasing freezing temperature. With the addition of 16% oligosaccharides to starch, the porosity, particle size, crystallinity, initial gelatinization temperature, peak value, breakdown and retrogradation viscosity of the starch granules significantly decreased in the order of XOS > GOS > FOS. However, the pasting temperature of the granules increased. The addition of oligosaccharides (especially XOS, which has the most significant effect in inhibiting starch retrogradation) can inhibit the formation of starch crystal structures to a certain extent, reduce the damage from ice crystals to starch granules and delay starch retrogradation. Therefore, functional oligosaccharides can be used as a potentially effective additive to increase freezing stability in frozen starch-based foods.

Characterization of Chickpea (Cicer arietinum L.) Flour Films: Effects of pH and Plasticizer Concentration

The use of flours as a material for biopolymer-based film preparation has gained interest due to the fact that they are a natural mixture of compatible macromolecules and due to their low cost. Chickpea flour shows a promising composition for the development of edible films. The aim of this study was to characterize and evaluate the properties of chickpea flour films as affected by pH (7 or 10) and plasticizer concentration (1% or 3% w/v) of film-forming solutions. Water vapor permeability, solubility, color, opacity, mechanical properties, thermal stability, structural changes by Fourier transform infrared analysis, and microstructure of the films were determined. Glycerol content and pH influenced chickpea flour film properties, microstructure and structural organization; interactions were also observed. The 1% glycerol films showed lower water vapor permeability, thickness, radical scavenging capacity, elongation at break and puncture deformation, and higher dry matter content, swelling, opacity, elastic modulus, and tensile and puncture strengths than 3% glycerol films. Film-forming solutions at pH 10 produced films with higher thickness and swelling, and were greener than those from solutions at neutral pH. The changes were more intense in 1% glycerol films. Glycerol concentration and pH could be combined in order to obtain chickpea flour films with different properties according to different food packaging requirements.

Elaboration and Characterization of Active Apple Starch Films Incorporated with Ellagic Acid

Apple starch films were obtained from apples harvested at 60, 70, 80 and 90 days after full bloom (DAFB). Mechanical properties and water vapor permeability (WVP) were evaluated. The apple starch films at 70 DAFB presented higher values in the variables of tensile strength (8.12 MPa), elastic modulus (3.10 MPa) and lower values of water vapor permeability (6.77 × 10−11 g m−1 s−1 Pa−1) than apple starch films from apples harvested at 60, 80 and 90 DAFB. Therefore, these films were chosen to continue the study incorporating ellagic acid (EA). The EA was added at three concentrations [0.02% (FILM-EA0.02%), 0.05% (FILM-EA0.05%) and 0.1% (FILM-EA0.1%) w/w] and compared with the apple starch films without EA (FILM-Control). The films were characterized by their physicochemical, optical, morphological and mechanical properties. Their thermal stability and antioxidant capacity were also evaluated. The FILM-Control and FILM-EA0.02% showed a uniform surface, while FILM-EA0.05% and FILM-EA0.1% showed a rough surface and insoluble EA particles. Compared to FILM-Control, EA modified the values of tensile strength, elasticity modulus and elongation at break. The antioxidant capacity increased as EA concentration did. EA incorporation allowed obtaining films with higher antioxidant capacity, capable of blocking UV light with better mechanical properties than film without EA.

Development and characterization of edible films based on eggplant flour and corn starch

In this study, biodegradable and edible films based on eggplant flour (EF) and corn starch (CS) were prepared using casting method at proportion of 0-100, 25-75, 50-50, 75-25 and 100-0%, w/w. The mechanical, barrier, physical, and biodegradability properties were evaluated. Tensile strength, elongation at break, Young's modulus, thickness, density and L^⁎ parameter of pure starch films were higher than those of other films. Solubility, water vapor permeability (WVP), moisture content and swelling index of films were augmented with the substitution of CS by EF. Color measurement of the edible films indicated that increasing the proportion of EF increased a^⁎, b^⁎ and opacity values. The highest amount of water sorption was obtained for pure EF films. Moreover, the incorporation of EF accelerated films biodegradability compared to ones with only starch. In general, EF is a promising material for the formulation of edible and biodegradable films with adequate physical properties for food applications by direct contact.