Effect of physical modification on granule morphology, pasting behavior, and functional properties of arrowroot (Marantha arundinacea L) starch

Experimental and computational insights into starch pasting as influenced by amino acids with different R-groups

The effects of amino acids with different R-groups, namely glutamic acid (GLU), glutamine (GLN), and theanine (THE), on the pasting and structure properties of corn starch (CS) were investigated. During gelatinization, GLU decreased viscosity of CS. GLN and THE increased pasting enthalpy of CS from 7.62 to 8.72 and 9.50 J/g, respectively. All starch-amino acid systems had higher storage and loss modulus. Amino acids could adhere to starch granule surface. After co-gelatinization, GLU increased short-range order degree of starch, while GLN and THE decreased. Both infrared spectroscopy and quantum computation showed that non-covalent interaction occurred between amino acids and starch. Molecular dynamics revealed that the interaction between GLU and starch weakened hydrogen bonding between starch and water, promoting cross-linking between starch chains. GLN and THE changed dihedral angle torsion of glycoside bonds, and mainly interacted with starch by electrostatic interaction (50.06 kJ/mol) and van der Waals force (50.30 kJ/mol), respectively.

Heat-moisture and acid treatments can increase levels of resistant starch in arrowroot starch without adversely affecting its prebiotic activity in human colon microbiota

Carbohydrates are an important macronutrient whose processing and digestive fate can have numerous beneficial or adverse effects on consumer health. This study investigated the impact of heat-moisture treatments (HMT) and citric acid treatments (CAT) on arrowroot starch (ARS) with a focus on its physicochemical properties, digestibility, and influence on gut microbiota. The results revealed that HMT and CAT did not alter the colloidal characteristics of ARS but significantly affected the balance between amorphous and crystalline regions. Changes in thermal properties, morphology, and particle size were also observed. These can influence ARS shelf life and functional properties in various food applications. Furthermore, certain treatments in both processing methods increased the resistant starch (RS) content of ARS, with HMT for 16 hours at 80 °C and CAT with 0.6 M citric acid, resulting in the most pronounced effects. These changes coincided with reductions in rapidly digestible starch (RDS) levels and improvements in the ratio of slowly digestible starch (SDS) to RDS, which could potentially improve glycemic control. This study also examined the impact of processed ARS on colonic microbiota composition. It found that ARS-derived RS formed under HMT and CAT did not negatively affect the prebiotic potential of the RS fraction. Both treatments were associated with lowering the Firmicutes to Bacteroidetes ratio (F/B), a marker of gut health, and decreasing the relative abundance of Proteobacteria, microbes associated with adverse health effects. Additionally, CAT-derived RS showed a significant increase in the relative abundance of Roseburia, a beneficial gut bacterium. In conclusion, processing ARS through HMT and CAT techniques has the potential for enhancing its RS content, improving its glycemic impact, and positively influencing the gut microbiota composition, potentially contributing to gut health and metabolic well-being.

Influence of Temperatures on Physicochemical Properties and Structural Features of Tamarind Seed Polysaccharide

Due to the high content of impurities such as proteins in tamarind seed polysaccharide (TSP), they must be separated and purified before it can be used. TSP can disperse in cold water, but a solution can only be obtained by heating the mixture. Therefore, it is important to understand the dispersion and dissolution process of TSP at different temperatures to expand the application of TSP. In this study, pasting behavior and rheological properties as a function of temperature were characterized in comparison with potato starch (PS), and their relationship with TSP molecular features and microstructure was revealed. Pasting behavior showed that TSP had higher peak viscosity and stronger thermal stability than PS. Rheological properties exhibited that G' and G'' of TSP gradually increased with the increase in temperature, without exhibiting typical starch gelatinization behavior. The crystalline or amorphous structure of TSP and starch was disrupted under different temperature treatment conditions. The SEM results show that TSP particles directly transformed into fragments with the temperature increase, while PS granules first expanded and then broken down into fragments. Therefore, TSP and PS underwent different dispersion mechanisms during the dissolution process: As the temperature gradually increased, TSP possibly underwent a straightforward dispersion and was then dissolved in aqueous solution, while PS granules initially expanded, followed by disintegration and dispersion.

Gel Rheological Properties and Storage Texture Kinetics of Starches Isolated from Anchote (Coccinia abyssinica (Lam.) Cogn.) Cultivars

Anchote is a tuber crop indigenous to Ethiopia. Starch hydration properties and important gel characteristics which include: color, gel rheological properties (at 2, 4, 6, 8, and 10% starch:water w/w) and gel texture evolution (at 10% starch:water w/w), during 0 to 192 h storage (at 4 °C), of anchote starches isolated from four anchote cultivars (Desta 01, Desta 24, white and red) were evaluated and compared with potato and cassava starches (PS and CS). The lightness (L*) and whiteness scores of the anchote starch ranged up to >95, with slight differences among the cultivars, making them pure starches. Swelling power (SP) and water solubility index (WSI) of the anchote starches increased with increasing cooking temperature (40, 50, 60, 70, 80 and 90 °C), and their rate of increase varied significantly with the control starches, as follows: CS < anchote starches < PS. Anchote starch gels resisted higher stresses before breaking their structure and showed higher elasticity with lower (tan δ)1 values than PS and CS gels. They also had greater viscoelastic moduli even at lower concentrations than the PS and CS gels, and their stability increased with increasing concentration. The study of the gels' texture evolution during storage revealed that anchote starch gels had significantly higher (≥40%) initial and final (after 192 h) hardness and were less adhesive than the PS gel. Despite some significant differences in the studied starch gel quality parameters among the starches from the anchote cultivars, the results suggested their promising potential as additional new materials in the development of food products, specifically as a functional ingredient for the formulation of gel-like products.

Effect of autoclave-cooling cycles combined pullulanase on the physicochemical and structural properties of resistant starch from black Tartary buckwheat

A starch-rich portion is produced as a by-product of black Tartary buckwheat processing. The effect of enzymatic combined with autoclaving-cooling cycles (one, two, or three times) on the physicochemical and structural properties of black Tartary buckwheat type 3 resistant starch (BRS) was evaluated. The autoclaving-cooling cycles enhanced solubility and reduced swelling, with the BRS content increasing from 14.12% to 25.18%. The high crystallinity of the BRS reflected a high molecular order. However, increasing the number of autoclaving-cooling cycles did not result in higher BRS content. The highest BRS yield in the autoclaved starch samples was 25.18% after double-autoclaving-cooling cycles. Furthermore, the autoclaving-cooling cycles altered the crystalline structure of black Tartary buckwheat, and the subsequent crystallinity changed from 36.33% to 42.05% to 38.27%. Fourier-transform infrared spectroscopy shows that the number of cycles results in more efficient double-helical packing within the crystalline lamella. Principal component analysis showed that the autoclaving-cooling cycle treatment leads to significant changes in the molecular structure of resistant starch (RS). These results indicated that autoclaving-cooling cycles might be a feasible way for producing RS from black Tartary buckwheat starch with better structural stability to expand their application range.

Verification of autoclaving-cooling treatment to increase the resistant starch contents in food starches based on meta-analysis result

Autoclaving-cooling is a common starch modification method to increase the resistant starch (RS) content. The effect of this method varies depending on the type of crop and treatment condition used. The objectives of this study were to verify the autoclaving-cooling treatment based on a meta-analysis result and to evaluate the physicochemical properties of modified starches. The meta-analysis study used 10 articles from a total of 1,293 that were retrieved using the PRISMA approach. Meta-analysis showed that the optimal treatments of autoclaving-cooling process that increase the RS content significantly, was in starch samples from the cereal group (corn, oats, rice) (SMD: 19.60; 95% CI: 9.56-29.64; p < 0.001), with water ratio 1:4 (SMD: 13.69; 95% CI: 5.50-21.87; p < 0.001), using two cycles of autoclaving-cooling (SMD: 16.33; 95% CI: 6.98-25.67; p < 0.001) and 30 min of autoclaving heating (SMD: 12.97; 95% CI: 1.97-23.97; p < 0.001) at 121°C (SMD: 12.18; 95% CI: 1.88-22.47; p < 0.001). Verification using corn flour and corn starch showed a significant increase in RS contents from 15.84 to 27.78% and from 15.27 to 32.53%, respectively, and a significant decrease in starch digestibility from 67.02 to 35.74% and from 76.15 to 28.09%, respectively. Treated sample also showed the pasting profile that was stable under heating and stirring.

Integrated Starches and Physicochemical Characterization of Sorghum Cultivars for an Efficient and Sustainable Intercropping Model

Sorghum has good adaptation to drought tolerance and can be successfully cultivated on marginal lands with low input cost. Starch is used in many foods and nonfood industrial applications and as a renewable energy resource. Sorghum starches with different amylose contents affect the different physicochemical properties. In this study, we isolated starches from six sorghum varieties (i.e., Jinza 34, Liaoza 19, Jinnuo 3, Jiza 127, Jiniang 2, and Jiaxian) and investigated them in terms of their chemical compositions and physicochemical properties. All the starch granules had regular polygonal round shapes and showed the characteristic “Maltese cross”. These six sorghum starches showed an A-type diffraction pattern. The highest amylose content of starch in Jinza 127 was 26.90%. Jiaxian had a higher water solubility at 30, 70, and 90 °C. From the flow cytometry analysis based on six sorghum starch granules, Liaoza 19 had a larger and more complex granules (particle percentage (P1) = 66.5%). The Jinza 34 starch had higher peak (4994.00 mPa∙s) and breakdown viscosity (4013.50 mPa∙s) and lower trough viscosity (973.50 mPa∙s). Jinnuo 3 had higher onset temperature, peak temperature, conclusion temperature, gelatinization enthalpy, and gelatinization range. The principal component analysis and hierarchical cluster analysis based on classification of different sorghum starches showed that Jiniang 2 and Jinnuo 3 had similar physicochemical properties and most divergent starches, respectively. Our result provides useful information not only on the use of sorghum starches in food and non-food industries but for the great potential of sorghum-based intercropping systems in maintaining agricultural sustainability.

Trend of Modification by Autoclave at Low Pressure and by Natural Fermentation in Sweet Potato and Cassava Starches

Sweet potatoes (Ipomoea batatas L.) and cassava (Manihot esculenta C.) are part of the largest food crops in many countries. They have good nutritional value because, in addition to containing vitamins, minerals, carotenoids, and anthocyanins in varied contents, due to the existence of various colors of their pulps, they have starch as their major constituent. As such, they are considered valuable raw materials for the food factory. The starch granules have distinct morphologies and properties, related to the type of cultivar, planting conditions, storage, and processing, which in turn can affect the quality of the final products to which they have been added. The use of native starches in the food industry has limitations, which can be improved by modifications. Physical methods, as they are associated with green technology, and do not pollute the environment, have demonstrated great potential for this purpose. Both modifications—by autoclave at low pressure and natural fermentation—have shown potential in modifying these starches.

Ariá (Goeppertia allouia) Brazilian Amazon tuber as a non-conventional starch source for foods

Ariá (Goeppertia allouia) is a tuber from the arrowroot's family widely found in the Brazilian Amazon. The tuber has a flavor similar to corn, besides high retrogradation when cooked, differing from other commercial starches. To enhance its added value, the Ariá starch was extracted to evaluate its potential as a food ingredient. The Ariá starch was compared to the commercially available corn and potato starches regarding their physicochemical, thermal, structural, and rheological properties based on the Duncan's test (p-value <0.05). The Ariá starch presented high amylose content (~38% w/w). Furthermore, the X-ray diffraction pattern confirmed its Type-C crystalline structure. The rheological properties showed that the starch gels presented high hardness and retrogradation as other studied starches. Ariá has great potential as a source of starch with low digestibility, increasing the satiety of food products.

Starch-gelatin film as an alternative to the use of plastics in agriculture: a review

BACKGROUND

The technological advances in agriculture, driven by the increased demand for food attributed to population growth, have led to the search for technologies that allow greater control over the variables that interfere in crop yield. Several techniques stand out for optimizing yield capacity, including cultivation in a protected environment, mulching and low tunneling. To expand the use of these techniques, synthetic petroleum-based polymers are employed due to their low cost, easy processing, and lightness. However, they take a long time to degrade, and, since they are discarded at the end of each cycle of cultivation, end up accumulating in the environment causing irreversible damage.

RESULTS

The use of biodegradable films, made of starch and/or a protein source such as gelatin, has been studied as a promising alternative. Both stand out because of their film-forming ability, and because they come from abundant sources and are biodegradable.

CONCLUSION

This study aimed to review the current findings on starch and gelatin films that can be used as alternatives to conventional plastics in agricultural crops. © 2019 Society of Chemical Industry.