Cold and salt stress modulate amount, molecular and macromolecular structure of a Lactobacillus sakei dextran

Modulation of soy flour bioactivity against enterotoxigenic Escherichia coli by fermentation with exopolysaccharides-producing lactic acid bacteria

Enterotoxigenic Escherichia coli (ETEC)-mediated diarrhea can be mitigated by inhibiting bacterial adhesion to intestinal surface. Some lactic acid bacteria (LAB) produce exopolysaccharides (EPS) that can inhibit ETEC adhesion. In this study, we fermented soy flour-based dough (SoyD) with EPS-producing LAB strains Pediococcus pentosaceus TL (PpTL), Leuconostoc citreum TR (LcTR), Leuconostoc mesenteroides WA (LmWA) and L. mesenteroides WN (LmWN) to improve anti-adhesive activity of the dough against ETEC. The strains LcTR, LmWA and LmWN produced EPS in SoyD fermentation with similar polysaccharide yields and compositions as when grown in liquid medium, whereas PpTL was unable to produce EPS in SoyD. LcTR produced high molecular weight (Mw) dextran (∼900 kDa) while LmWA and LmWN produced dextran and levan with diverse Mw (∼20-1000 kDa). SoyD fermentation by EPS-producing LAB increased the capability of the SoyD extracts to adhere to ETEC cells and block ETEC adhesion to porcine mucin. After Mw-based fractionation, all extract-fractions (>3 kDA) of LmWA- and LmWN-fermented SoyD retained their blocking activity indicating that various Mw populations of the EPS contributes to bioactivity against ETEC. This study shows the potential of EPS-producing LAB strains as fermenting microorganisms in the development of a functional food product with anti-diarrheal properties.

Effects of different stress conditions on the production, bioactivities, physicochemical and structural characteristics of exopolysaccharides synthetized by Schleiferilactobacillus harbinensis Z171

This study systematically investigated the effects of stress conditions including temperature, pH, H2O2, NaCl, antibiotics on the production and in vitro cholesterol-lowering activity of the exopolysaccharide (EPS) synthetized by Schleiferilactobacillus harbinensis Z171. Additionally, the influences of the optimal stress condition combined with different carbon sources on EPS production were examined, shedding light on the structural characteristics, physicochemical properties and bioactivities of EPSs. The results demonstrated that the EPS produced under H2O2 stress was optimal and presented excellent resistance to simulated gastric juice and α-amylase. Three main fractions, denoted as G-EPS1, F-EPS1 and S-EPS1, were isolated by cellulose DEAE-52 chromatography from crude EPSs synthetized using glucose, fructose and sucrose as carbon sources, respectively. Among them, F-EPS1 possessed the highest cholesterol-lowering, antioxidant and hypoglycemic activities, with the highest molecular weight 91.03 kDa, largest particle size 40.14 nm and apparent viscosity 288.2 mPa·s. Three EPSs exhibited irregular sheet-like and granular structures with good thermal stability. Structural characterization of F-EPS1a (a purified fraction from F-EPS1) revealed that it was a mannan mainly composed of →2)-α-D-Manp-(1→, →3)-α-Manp-(1→ and →2,6)-α-D-Manp-(1→ with branch chains containing α-D-Manp-(1→. F-EPS1a has more potential to be a natural cholesterol-lowering, hypoglycemic and antioxidant supplements in the food industry.

Temperature stress improved exopolysaccharide yield from Tetragenococcus halophilus: Structural differences and underlying mechanisms revealed by transcriptomic analysis

This study aimed to enhance exopolysaccharide production by Tetragenococcus halophilus, and results showed that low temperature (20 °C) significantly improved exopolysaccharide production. Based on the analysis of batch fermentation kinetic parameters, a temperature-shift strategy was proposed, and the exopolysaccharide yield was increased by 28 %. Analysis of the structure of exopolysaccharide suggested that low temperature changed the molecular weight and monosaccharide composition. Transcriptomic analysis was performed to reveal mechanisms of low temperature improving exopolysaccharide production. Results suggested that T. halophilus regulated utilization of carbon sources through phosphotransferase system and increased the expression of key genes in exopolysaccharide biosynthesis to improve exopolysaccharide production. Meanwhile, metabolic pathways involved in glycolysis, amino acids synthesis, two-component system and ATP-binding cassette transporters were affected at low temperature. Results presented in this paper provided a theoretical basis for biosynthetic pathway of exopolysaccharide in T. halophilus and aided to strengthen its production and application in many areas.

Different responses of two Chinese cabbage (Brassica rapa L. ssp. pekinensis) cultivars in photosynthetic characteristics and chloroplast ultrastructure to salt and alkali stress

Salt and alkali stress affected the photosynthetic characteristics of Chinese cabbages. A salt-tolerant cultivar maintained its tolerance by ensuring the high ability of photosynthesis. The synthesis of organic acids and carbohydrates in leaves played important roles in improving the photosynthetic capacity of alkali-tolerant plants. Soil salinization has become an increasingly serious ecological problem, which limits the quality and yield of crops. As an important economic vegetable in winter, however, little is known about the response of Chinese cabbage to salt, alkali and salt-alkali stress in photosynthetic characteristics and chloroplast ultrastructure. Thus, two Chinese cabbage cultivars, 'Qinghua' (salt-tolerant-alkali-sensitive) and 'Biyu' (salt-sensitive-alkali-tolerant) were investigated under stresses to clarify the similarities and differences between salt tolerance and alkali tolerance pathways in Chinese cabbage. We found that the root of Qinghua, the leaf ultrastructure and net photosynthetic rate (Pn), stomatal conductance (Gs), water use efficiency (WUE), maximum photochemical quantum yield of PSII (Fv/Fm) and nonphotochemical quenching (NPQ) were not affected by salt stress. However, Biyu was seriously affected under salt stress. Its growth indexes decreased by between 60 and 30% compared with the control and the photosynthetic indexes were also seriously affected under salt stress. This indicated that the salt-tolerant cultivar Qinghua improved the photosynthetic fluorescence ability to promote the synthesis of organic matter resulting in salt tolerance. In contrast, under alkali treatment, the root of Biyu was affected by alkali stress, but could still maintain good growth, and root and leaf structure were not seriously affected and could maintain the normal operations. Biyu improved its tolerance by improving the water use efficiency, regulating the synthesis of organic acids and carbohydrates, ensuring the synthesis of organic matter and ensured the normal growth of the plant.

In vitro growth performance, antioxidant activity and cell surface physiological characteristics of Pediococcus pentosaceus R1 and Lactobacillus fermentum R6 stressed at different NaCl concentrations

This study investigated the impact of NaCl concentrations on the growth performance, antioxidant activity, and cell surface physiological characteristics of Pediococcus pentosaceus R1 and Lactobacillus fermentum R6. The growth of the two strains was significantly inhibited by 4 and 6% NaCl and stagnated at 8% NaCl (P < 0.05). Compared with the control, both strains showed higher acid-producing activity, antioxidant activity and autoaggregation ability at 2 or 4% NaCl. A lower cell surface hydrophobicity of the two strains was observed with increased NaCl concentrations. High NaCl concentrations resulted in cell surface damage and deformation and even slowed the proliferation of the strains, and led to significant shifts in amide A and amide III groups in proteins and the C-H stretching of >CH2 in fatty acids (P < 0.05). In summary, appropriate NaCl concentrations (2 and 4%) improved the antioxidant activity of the two strains, while the higher NaCl concentrations (6%) decreased their antioxidant activity, which may be due to the associated changes in the cell surface structural properties of the two strains.

Metagenomic analysis of microbial community succession during the pickling process of Zhacai (preserved mustard tuber) and its correlation with Zhacai biochemical indices

BACKGROUND

Industrial Fuling Zhacai is pickled by a method summarized as 'three times pickled and pressed', in which raw mustard tubers are subjected to three stages of pickling in different salt concentrations, with a pressing operation at the end of each stage to remove brine. This study used Illumina MiSeq technology and multivariate statistical analyses to investigate microbial community succession during the pickling process and its correlation with Zhacai biochemical indices.

RESULTS

A total of 19 phyla, 208 genera, and 295 species of bacteria were identified. Lactobacillus was the dominant genus of bacteria in all three stages and Lactobacillus sakei was the dominant species in the first and second stages. A total of six phyla, 200 genera and 301 species of fungi were also identified. According to a PICRUSt2 prediction, the main functions of the bacterial and fungal communities were carbohydrate and protein metabolism, while alcohol metabolism was also a function of fungi. Nine bacterial genera closely correlated with Zhacai biochemical indices: Acinetobacter, Pseudomonas, Pedobacter, Erwinia, Lactobacillus, Chryseobacterium, Flavobacterium, Duganella, and Paenarthrobacter. Six genera of fungi correlated closely: Penicillium, Cystobasidium, Cladosporium, Plenodomus, Aspergillus, and Simplicillium. All these genera probably originated from the surface microorganisms of raw mustard tuber.

CONCLUSION

This study reveals the succession patterns of microbial community structures during the pickling process of industrial Zhacai and infers the core functional flora, providing reference data for Zhacai pickling process control. © 2020 Society of Chemical Industry.

Influence of fermentation temperature on in situ heteropolysaccharide formation (Lactobacillus plantarum TMW 1.1478) and texture properties of raw sausages

This study puts a focus on the influence of microbial in situ heteropolysaccharide (HePS) formation on the quality of raw fermented sausages (salami). Since exopolysaccharide-production is often triggered by sub-optimal growth conditions, the influence of different fermentation temperatures was also investigated. For this reason, the sausage batter was inoculated with (Lactobacillus plantarum TMW 1.1478) or without (L. sakei TMW 1.2037; control) a HePS-producing starter culture (inoculation concentration ~108 CFU/g), and the sausages fermented at either 10, 16, or 24°C (7 days), followed by a drying period at 14°C until the final weight loss of 31% was reached. Microbial growth, pH, and weight loss development were monitored and the products further characterized using texture profile analysis and a sensory test. HePS in the salami matrix were determined using confocal laser scanning microscopy and a semi-quantitative data interpretation approach. Sausages containing L. plantarum were found to be significantly (p < .05) softer compared with control samples, which was also confirmed in the sensory analysis. The different fermentation temperatures had an influence on the drying speed. Here, sausages produced with L. plantarum needed more time to reach the final weight loss of 31% as compared to control samples, which could be attributed to the presence of exopolysaccharides in the matrix (p < .05). Using HePS-forming starter cultures in raw fermented sausage manufacturing can lead to products with a softer texture (undesired in Europe) depending on the strain and processing conditions used, highlighting the importance of a suitable starter culture selection in food processing.

Influence of microbial in-situ heteropolysaccharide production on textural properties of raw fermented sausages (salami)

The purpose of the study was to investigate the influence of a heteropolysacchride (HePS)-forming lactic acid bacteria (LAB) on the quality attributes of raw fermented sausages. Therefore, salamis with the HePS-producing strain Lactobacillus plantarum TMW 1.1478 or the non-EPS-producing strain Lactobacillus sakei TMW 1.2037 (control) were manufactured using two different inoculation concentrations: more precisely, 10⁷ CFU/g (typical starter culture concentration) or 10⁹ CFU/g. Growth behavior, a_w and pH development were recorded until a weight loss of 31% was reached and in-situ-formed EPS detected using confocal laser scanning microscopy. Moreover, the influence of the HePS formed on texture (texture profile analysis; TPA) and sensory attributes (26 panelists, ranking test) was investigated. The final products containing L. plantarum TMW 1.1478 were found to be significantly softer (p < 0.05) than the respective control samples, an effect that was even more pronounced at the higher inoculation level of 10⁹ CFU/g. The semi-quantitative data interpretation of the CLSM pictures revealed that the EPS were predominantly formed during the first 72 h of fermentation at 24 °C until the final pH of 4.95 ± 0.05 was reached (stationary phase). The sensory evaluation (consistency) was in accordance with the TPA results and taste was not negatively influenced by the HePS-forming strain. Results clearly indicate that EPS-producing LAB can have a negative influence on the quality of raw fermented sausages. However, these strains (in the present case L. plantarum TMW 1.1478) might be interesting for application in the field of spreadable raw sausage manufacturing.

Analysis of Structural and Functional Differences of Glucans Produced by the Natively Released Dextransucrase of Liquorilactobacillus hordei TMW 1.1822

The properties of the glucopolymer dextran are versatile and linked to its molecular size, structure, branching, and secondary structure. However, suited strategies to control and exploit the variable structures of dextrans are scarce. The aim of this study was to delineate structural and functional differences of dextrans, which were produced in buffers at different conditions using the native dextransucrase released by Liquorilactobacillus (L.) hordei TMW 1.1822. Rheological measurements revealed that dextran produced at pH 4.0 (MW = 1.1 * 108 Da) exhibited the properties of a viscoelastic fluid up to concentrations of 10% (w/v). By contrast, dextran produced at pH 5.5 (MW = 1.86 * 108 Da) was gel-forming already at 7.5% (w/v). As both dextrans exhibited comparable molecular structures, the molecular weight primarily influenced their rheological properties. The addition of maltose to the production assays caused the formation of the trisaccharide panose instead of dextran. Moreover, pre-cultures of L. hordei TMW 1.1822 grown without sucrose were substantial for recovery of higher dextran yields, since the cells stored the constitutively expressed dextransucrase intracellularly, until sucrose became available. These findings can be exploited for the controlled recovery of functionally diverse dextrans and oligosaccharides by the use of one dextransucrase type.

Usage of in situ exopolysaccharide-forming lactic acid bacteria in food production: Meat products-A new field of application?

In the meat industry, hydrocolloids and phosphates are used to improve the quality attributes of meat products. However, latest research results revealed that the usage of exopolysaccharide (EPS)-forming lactic acid bacteria (LAB), which are able to produce EPS in situ during processing could be an interesting alternative. The current review aims to give a better understanding of bacterial EPS production in food matrices with a special focus on meat products. This includes an introduction to microbial EPS production (homopolysaccharides as well as heteropolysaccharides) and an overview of parameters affecting EPS formation and yield depending on LAB used. This is followed by a summary of methods to detect and characterize EPS to facilitate a rational selection of starter cultures and fermentation conditions based on desired structure-function relationships in different food matrices. The mechanism of action of in situ generated EPS is then highlighted with an emphasis on different meat products. In the process, this review also highlights food additives currently used in meat production that could in the future be replaced by in situ EPS-forming LAB.

Insights into extracellular dextran formation by Liquorilactobacillus nagelii TMW 1.1827 using secretomes obtained in the presence or absence of sucrose

Dextrans are α-(1,6)-linked glucose polymers, which are exclusively produced by lactic acid bacteria from sucrose via extracellular dextransucrases. Previous studies suggested that the environmental pH and the presence of sucrose can impact the release and activity of these enzymes. To get deeper insight into this phenomenon, the dextransucrase expressed by water kefir borne Liquorilactobacillus (L.) nagelii TMW 1.1827 (formerly Lactobacillus nagelii) was recovered in supernatants of buffered cell suspensions that had been incubated with or without sucrose and at different pH. The obtained secretomes were used to time-dependently produce and recover dextrans, whose molecular and macromolecular structures were determined by methylation analysis and AF4-MALS-UV measurements, respectively. The initial pH of the buffered cell suspensions had solely a minor influence on the released dextransucrase activity. When sucrose was present during incubation, the secretomes contained significantly higher dextransucrase activities, although the amounts of totally released proteins obtained with or without sucrose were comparable. However, the dextransucrase appeared to be released in lower amounts into the environment if sucrose was not present. The amount of isolable dextran increased up to 24 h of production, although the total sucrose was consumed within the first 10 min of incubation. Furthermore, the sucrose isomer leucrose had been formed after 10 min, while its concentrations decreased over time and the portions of longer isomaltooligosaccharides (IMOs) increased. This indicated that leucrose can be used by L. nagelii TMW 1.1827 to produce more elongated and branched dextran molecules from presynthesized IMOs, while disproportionation reactions on short IMOs may appear additionally. This leads to increasing amounts of high molecular weight dextran in a state of sucrose depletion. These findings reveal new insights into the pH- and sucrose-dependent kinetics of extracellular dextran formation and may be useful for optimization of fermentative and enzymatic dextran production processes.

Living the Sweet Life: How Liquorilactobacillus hordei TMW 1.1822 Changes Its Behavior in the Presence of Sucrose in Comparison to Glucose

Liquorilactobacillus (L.) hordei (formerly Lactobacillus hordei) is one of the dominating lactic acid bacteria within the water kefir consortium, being highly adapted to survive in this environment, while producing high molecular weight dextrans from sucrose. In this work, we extensively studied the physiological response of L. hordei TMW 1.1822 to sucrose compared to glucose, applying label-free, quantitative proteomics of cell lysates and exoproteomes. This revealed the differential expression of 53 proteins within cellular proteomes, mostly associated with carbohydrate uptake and metabolism. Supported by growth experiments, this suggests that L. hordei TMW 1.1822 favors fructose over other sugars. The dextransucrase was expressed irrespectively of the present carbon source, while it was significantly more released in the presence of sucrose (log₂FC = 3.09), being among the most abundant proteins within exoproteomes of sucrose-treated cells. Still, L. hordei TMW 1.1822 expressed other sucrose active enzymes, predictively competing with the dextransucrase reaction. While osmolysis appeared to be unlikely, sucrose led to increased release of a multitude of cytoplasmic proteins, suggesting that biofilm formation in L. hordei is not only composed of a polysaccharide matrix but is also of proteinaceous nature. Therefore, our study highlights the intrinsic adaptation of water kefir-borne L. hordei to sucrose-rich habitats and provides fundamental knowledge for its use as a starter culture in plant-based food fermentations with in situ dextran formation.

Structural characterization of mixed-linkage α-glucans produced by mutants of Lactobacillus reuteri TMW 1.106 dextransucrase

Dextrans and other bacterial α-glucans are versatile and structurally diverse polysaccharides which can be enzymatically synthesized by using glucansucrases. By substituting certain amino acids in the active site of these enzymes, the structure of the synthesized polysaccharides can be modified. In this study, such amino acid substitutions were applied (single and combined) to the dextransucrase from Lactobacillus reuteri TMW 1.106 and the structures of the synthesized polysaccharides were subsequently characterized in detail. Besides methylation analysis, α-glucans were hydrolyzed by several glycoside hydrolases and the liberated oligosaccharides were identified by comparison to standard compounds or by isolation and NMR spectroscopic characterization. Furthermore, two-dimensional NMR spectroscopy was used to analyze the untreated polysaccharides. The results demonstrated that structurally different α-glucans were formed, for example different highly O4-branched dextrans or several reuteran-like polymers with varying fine structures. Consequently, mutant Lactobacillus reuteri TMW 1.106 dextransucrases can be used to form structurally unique polysaccharides.

Influence of homopolysaccharide-producing lactic acid bacteria on the spreadability of raw fermented sausages (onion mettwurst)

The purpose of the study was to investigate the effect of a reduced pH value (5.1 instead of 5.5 to 5.6) on the properties of highly perishable, spreadable raw fermented sausages (onion mettwurst) with or without the addition of homopolysaccharide (HoPS)-producing lactic acid bacteria (LAB). Hence, sausages with HoPS-producing LAB and a pH value of 5.1 were produced and compared to sausages (pH 5.1) produced with a non-exopolysaccharide (EPS)-forming strain (Lactobacillus sakei TMW 1.2037). Microbial growth and pH values were monitored during processing (24 °C for 48 hr, 10 °C for 24 hr) and storage (14 days at 0 to 2 °C). Furthermore, fat (Weibull-Stoldt) and EPS contents were determined in the final products. Sausages were characterized using texture profile and sensory analysis. The fat contents ranged from 16% to 19% and the determined EPS concentrations ranged from 0.17 to 0.59 g/kg for L. sakei TMW 1.411 and Lactobacillus curvatus TMW 1.1928 and from 0.67 to 1.58 g/kg for L. curvatus TMW 1.51. The strains L. sakei TMW 1.411 and L. curvatus TMW 1.51 reduced the hardness of the samples significantly (P < 0.05) compared to the control samples. Regarding spreadability and mouthfeel, sausages containing an EPS-forming culture were rated slightly better than the control samples and the taste was not negatively influenced. PRACTICAL APPLICATION: This study clearly demonstrated that it is promising to apply HoPS-producing LAB to maintain the spreadability of pH-reduced (pH 5.1) spreadable raw fermented onion mettwurst, which may prospectively give the opportunity to increase the safety of this highly perishable product.

Sucrose enhances colour formation in dry sausages by up-regulating gene expression of nitric oxide synthase in Staphylococcus vitulinus

The effects of glucose and sucrose on the gene expression of nitric oxide synthase (NOS) in Staphylococcus vitulinus and colour formation in dry sausages were investigated. The results showed that sucrose addition promoted nitric oxide (NO) production in media when compared with glucose. In addition, sucrose could up-regulate nos (encoding NOS) and katA (encoding catalase KatA) gene expression by enhancing oxidative stress levels. In the sausages inoculated with S. vitulinus, a*-values (indicating redness) of the sausages with added sucrose were higher than those of samples with added glucose (P < 0.05) but did not differ from those in the nitrite treatment group (P > 0.05). The UV-vis spectra results showed that nitrosylmyoglobin (NO-Mb) was formed in the sausages with either S. vitulinus or nitrite added. In the S. vitulinus-inoculated sausages, sucrose addition led to a higher NO-Mb content than that after glucose addition, which was attributed to up-regulation of the nos gene. This study provides a potential method to enhance NO yield in S. vitulinus and colour formation in dry sausages without nitrite addition.

A systematic approach to study the pH-dependent release, productivity and product specificity of dextransucrases

Background

Dextransucrases are extracellular enzymes, which catalyze the formation of α-1→6-linked glucose polymers from sucrose. These enzymes are exclusively expressed by lactic acid bacteria, which commonly acidify the extracellular environment due to their physiology. Dextransucrases are thus confronted with steadily changing reaction conditions in regards to the environmental pH, which can further affect the amount of released dextransucrases. In this work, we studied the effect of the environmental pH on the release, the productivity and the product specificity of the dextransucrase expressed by Lactobacillus (L.) hordei TMW 1.1822. Dextransucrases were recovered as crude extracts at pH 3.5–pH 6.5 and then again used to produce dextrans at these pH values. The respectively produced dextran amounts and sizes were determined and the obtained results finally systematically correlated.

Results

Maximum dextran amounts were produced at pH 4.0 and pH 4.5, while the productivity of the dextransucrases significantly decreased at pH 3.5 and pH 6.5. The distribution of dextran amounts produced at different pH most likely reflects the pH dependent activity of the dextransucrases released by L. hordei, since different transglycosylation rates were determined at different pH using the same dextransucrase amounts. Moreover, similar hydrolysis activities were detected at all tested conditions despite significant losses of transglycosylation activities indicating initial hydrolysis prior to transglycosylation reactions. The molar masses and rms radii of dextrans increased up to pH 5.5 independently of the stability of the enzyme. The gelling properties of dextrans produced at pH 4.0 and pH 5.5 were different.

Conclusions

The presented methodological approach allows the controlled production of dextrans with varying properties and could be transferred and adapted to other microbes for systematic studies on the release and functionality of native sucrases or other extracellular enzymes.

In situ production and characterization of cloud forming dextrans in fruit-juices

Turbidity in beverages is typically achieved by addition of emulsion based cloud systems. Their intrinsic instability necessitates the widespread use of technological measures and use of food additives to prevent emulsion decay. In this work, we explored the possibility to establish a new generation of natural, stable clouding systems based on bacterial dextrans. Lactobacillus hordei TMW 1.1907 originating from water kefir was used to produce dextrans in sucrose supplemented apple or grape juices. By varying the fermentation conditions, two distinct types of dextran molecules could be produced at yields ranging from 2.5 to 8.5 g/L. The dextran-containing fermentates showed an unchanged turbidity after pasteurization at acidic pH and subsequent storage for three months. No sedimentation of particles occurred upon storage. Neutralization of the acidic fruit juices to pH 7 prior to fermentation significantly increased the dextran yields. The molecular weight, rms radii and turbidity of dextrans produced at 20 °C were higher than those produced at 30 °C. Characterization of the isolated dextrans by asymmetric flow field-flow fractionation coupled to multi-angle laser light scattering revealed a random-coil like structure and rms radii ranging from 66.0 to 87.4 nm. The averaged molar masses of the cloud forming dextrans were in the approximate range of 103.1 to 141.6 MDa. In conclusion, our results demonstrate the possibility to ferment fruit juices for in situ production of dextrans exhibiting novel techno-functional properties beyond gelling and thickening.

Different Modes of Regulation of the Expression of Dextransucrase in Leuconostoc lactis AV1n and Lactobacillus sakei MN1

Leuconostoc lactis AV1 strain isolated from a Tunisian avocado was characterized as a dextran producer. The promoter P dsrLL and the dsrLL gene encoding the DsrLL dextransucrase responsible for the dextran synthesis were transcriptionally fused to the mCherry coding gene generating the pRCR20 plasmid. Upon plasmid transfer, both AV1n and the dextran non-producing Leuconostoc mesenteroides CM70 became red due to expression of the mCherry from the P dsrLL-dsr-mrfp transcriptional fusion. Characterization of the polymers present in cultures supernatants revealed that the DsrLL encoded from pRCR20 in the recombinant bacteria was able to synthesize dextran. The production of dextran by the DsrLL in AV1n increased in response to low temperature, reaching 10-fold higher levels at 20°C than at 37°C (4.15 g/L versus 0.41 g/L). To analyze if this stress response includes activation at the transcriptional level and if it was only restricted to Leuconostoc, AV1n was transformed with plasmids carrying either the P dsrLL -mrfp fusion or the P dsrLS of Lactobacillus sakei MN1 fused to the mrfp gene, and the influence of temperature and carbon source on expression from the Dsr promoters was monitored by measurement of the mCherry levels. The overall expression analysis confirmed an induction of expression from P dsrLL upon growth at low temperature (20°C versus 30°C and 37°C) in the presence of sugars tested (sucrose, glucose, maltose, and fructose). In addition, the presence of sucrose, the substrate of Dsr, also resulted in activation of expression from P dsrLL . A different behavior was detected, when expression from P dsrLS was evaluated. Similar levels of fluorescence were observed irrespectively of the carbon source or temperature, besides a sequential decrease at 30°C and 20°C, when sucrose was present in the growth medium. In conclusion, the two types of regulation of expression of Dsr presented here revealed two different mechanisms for environmental adaptation of Leuconostoc and Lactobacillus that could be exploited for industrial applications.

Sucrose-Induced Proteomic Response and Carbohydrate Utilization of Lactobacillus sakei TMW 1.411 During Dextran Formation

Lactobacillus (L.) sakei belongs to the dominating lactic acid bacteria in indigenous meat fermentations, while diverse strains of this species have also been isolated from plant fermentations. We could recently show, that L. sakei TMW 1.411 produces a high molecular weight dextran from sucrose, indicating its potential use as a dextran forming starter culture. However, the general physiological response of L. sakei to sucrose as carbohydrate source has not been investigated yet, especially upon simultaneous dextran formation. To address this lack of knowledge, we sequenced the genome of L. sakei TMW 1.411 and performed a label-free, quantitative proteomics approach to investigate the sucrose-induced changes in the proteomic profile of this strain in comparison to its proteomic response to glucose. In total, 21 proteins were found to be differentially expressed at the applied significance criteria (FDR ≤ 0.01). Among these, 14 were associated with the carbohydrate metabolism including several enzymes, which enable sucrose and fructose uptake, as well as, their subsequent intracellular metabolization, respectively. The plasmid-encoded, extracellular dextransucrase of L. sakei TMW 1.411 was expressed at high levels irrespective of the present carbohydrate and was predominantly responsible for sucrose consumption in growth experiments using sucrose as sole carbohydrate source, while the released fructose from the dextransucrase reaction was more preferably taken up and intracellularly metabolized than sucrose. Genomic comparisons revealed, that operons coding for uptake and intracellular metabolism of sucrose and fructose are chromosomally conserved among L. sakei, while plasmid-located dextransucrase genes are present only in few strains. In accordance with these findings, all 59 different L. sakei strains of our strain collection were able to grow on sucrose as sole carbohydrate source, while eight of them exhibited a mucous phenotype on agar plates indicating dextran formation from sucrose. Our study therefore highlights the intrinsic adaption of L. sakei to plant environments, where sucrose is abundant, and provides fundamental knowledge regarding the use of L. sakei as starter culture for sucrose-based food fermentation processes with in-situ dextran formation.

Structural characterization of the surface-associated heteropolysaccharide of Lactobacillus plantarum TMW 1.1478 and genetic analysis of its putative biosynthesis cluster

Microbial exopolysaccharides (EPS) like xanthan are widely exploited as natural biopolymers in diverse industrial sectors. In foods, in-situ EPS formation by starter cultures allows the manufacturing of "clean labeled" products with improved textural and nutritional properties. We performed structural analyses of the cell surface-associated EPS produced by Lactobacillus plantarum TMW 1.1478, which is a promising starter culture for fermented foods. Chromatographic analyses and NMR experiments suggested an acetylated heptameric repeating unit comprised of glucose, rhamnose and galactose as major components, whereas analysis of the macromolecular HePS structure suggested an apparent molecular mass of M_r ∼2 × 10⁶ and a root mean square (RMS) radius of ca. 60 nm. Genetic analyses enabled the identification of the respective EPS biosynthesis cluster, and its modular organization supports the chemically identified, novel EPS structure. The obtained results broaden the understanding of complex EPS formation from activated sugar nucleotides by Lactobacillus plantarum.