Studying a chaperone-like effect of beta-casein on pressure-induced aggregation of beta-lactoglobulin in the presence of alpha-lactalbumin

Development of a human milk protein concentrate from donor milk: Impact of the pasteurization method on static in vitro digestion in a preterm newborn model

The impact of high temperature short time (HTST, 72 °C, 15 s), Holder pasteurization- (63 °C, 30 min) and high hydrostatic pressure (HHP, 600 MPa-10 min) was evaluated on the digestibility of human milk protein concentrate (HMPC) by using a static in vitro gastrointestinal digestion system. The results showed that the processing steps used to produce the HMPC induced a decrease in readily available nitrogen (non-protein nitrogen and peptides). Overall, digestibility was similar between pasteurized and raw HMPC (degree of hydrolysis ranged from 26 to 34 %). Lactoferrin was more susceptible to gastric and intestinal digestion after thermal pasteurization. Additionally, the resistance of β-casein to digestion increased after HHP and Holder pasteurization due to aggregation and changes in protein structure. During intestinal digestion, Holder pasteurization induced a higher release of arginine, phenylalanine and tyrosine from HMPC compared to raw and HHP-treated HMPC. Overall, protein structural changes induced by human milk (HM) processing (freeze-thawing and filtration) and pasteurization treatments affected HMPC proteolysis during in vitro digestion. However, protein digestion behaviors were quite similar for raw and HHP-treated HMPC compared to the thermal-treated HMPC, with no effect on lactoferrin digestion. Consequently, pasteurization of HMPC by HHP represents an interesting non-thermal process that preserves the HM bioactive proteins during digestion.

Factors affecting the modification of bovine milk proteins in high hydrostatic pressure processing: An updated review

High hydrostatic pressure (HHP) treatment induces structural changes in bovine milk proteins depending on factors such as the temperature, pH, concentration, decompression rate, cycling, composition of the medium and pressure level and duration. An in-depth understanding of the impact of these factors is important for controlling HHP-induced modification of milk proteins and the interactions within or between them, which can be applied to prevent undesired aggregation, gelation, and precipitation during HHP processing or to obtain specific milk protein modifications to attain specific protein properties. In this regard, understanding the influences of these factors can provide insight into the modulation and optimization of HHP conditions to attain specific milk protein structures. In recent years, there has been a great research attention on HHP-induced changes in milk proteins influenced by factors such as pH, temperature, concentration, cycling, decompression condition, and medium composition. Hence, to provide insight into how these factors control milk protein structures under HHP treatment and to understand if their effects depend on HHP parameters and environmental conditions, this review discusses recent findings on how various factors (pH, temperature, cycling, decompression rate, medium composition, and concentration) affect HHP-induced bovine milk protein modification. Practical Application: The information provided in this review will be very useful to anticipate the challenges related to the formulation and development of pressure-treated milk and dairy products.

Impact of holder, high temperature short time and high hydrostatic pressure pasteurization methods on protein structure and aggregation in a human milk protein concentrate

This work evaluated the impact of high temperature short time (HTST, 72 °C, 15 s), high hydrostatic pressure (HHP, 400-600 MPa at 5 and 10 min) and Holder pasteurization (HoP, 62.5 °C, 30 min) on protein profile and aggregation in a human milk protein concentrate (HMPC). The structural changes induced in milk proteins were investigated in HMPC as well as in sedimentable and non-sedimentable fractions recovered after ultracentrifugation. The results showed that heat treatments induced more protein denaturation and aggregation than did HHP treatments. Indeed, heat-induced protein aggregates observed in HMPC and the sedimentable fraction were mainly composed of lactoferrin and α-lactalbumin. More specifically, the concentration of lactoferrin in HMPC decreased by 86% after HTST and HoP whereas no effect was observed after HHP treatment. These results show the potential of HHP processing as a pasteurization method for HMPC since it minimizes the impact on protein structure, which generally correlates to protein quality and bioactivity.

Effect of High Hydrostatic Pressure Intensity on Structural Modifications in Mealworm (Tenebrio molitor) Proteins

Processing edible insects into protein extracts may improve consumer acceptability. However, a better understanding of the effects of food processing on the proteins is needed to facilitate their incorporation into food matrices. In this study, soluble proteins from Tenebrio molitor (10% w/v) were pressurized using high hydrostatic pressure (HHP) at 70–600 MPa for 5 min and compared to a non-pressurized control (0.1 MPa). Protein structural modifications were evaluated using turbidity measurement, particle-size distribution, intrinsic fluorescence, surface hydrophobicity, gel electrophoresis coupled with mass spectrometry, and transmission electron microscopy (TEM). The observed decrease in fluorescence intensity, shift in the maximum emission wavelength, and increase in surface hydrophobicity reflected the unfolding of mealworm proteins. The formation of large protein aggregates consisting mainly of hexamerin 2 and ⍺-amylase were confirmed by protein profiles on gel electrophoresis, dynamic light scattering, and TEM analysis. The typical aggregate shape and network observed by TEM after pressurization indicated the potential involvement of myosin and actin in aggregate formation, and these were detected by mass spectrometry. For the first time, the identification of mealworm proteins involved in protein aggregation phenomena under HHP was documented. This work is the first step in understanding the mealworm protein–protein interactions necessary for the development of innovative insect-based ingredients in food formulations.

Effect of alkalinization and ultra-high-pressure homogenization on casein micelles in raw and pasteurized skim milk

Mechanical and physicochemical treatments of milk induce structural modifications of the casein (CN) micelles, affecting their techno-functional properties in dairy processing. Here, we studied the effect of alkalinization and ultra-high-pressure homogenization (UHPH) on CN micelles in raw skim milk (rSM) and pasteurized skim milk (pSM). The pH of both skim milks (approximately 6.7) was adjusted to 8.5 and 10.5 before UHPH at 100, 200, and 300 MPa. The structural changes of the CN micelles during the treatments were assessed using laser diffraction, transmission electron microscopy, and turbidity measurements. Finally, ultracentrifugation (70,000 × g for 1 h at 20°C) was carried out to evaluate the protein's distribution between the supernatant (serum phase) and the pellet (colloidal phase) by gel electrophoresis and protein concentration measurement. Alkalinization of both skim milks induced a significant reduction in turbidity, whereas an increase of the average particle size was observed, the effect being more severe in pSM than rSM. At alkaline pH, more proteins were recovered in the serum phase, which suggested that the CN underwent major rearrangements into nonsedimentable CN forms of various sizes, as confirmed by transmission electron microscopy. The amount of CN found in the serum phase at pH 8.5 also increased with the UHPH pressure. Although UHPH did not influence the average CN micelle size at pH 6.7 and 8.5, a pressure-dependent decrease was observed at pH 10.5 for both skim milks. The structural changes of the CN micelles observed in this study throughout the combination of alkalinization and UHPH could be of interest for developing new dairy ingredients with improved functionality.

A Response Surface Methodology (RSM) Approach for Optimizing the Attenuation of Human IgE-Reactivity to β-Lactoglobulin (β-Lg) by Hydrostatic High Pressure Processing

The response surface methodology (RSM) and central composite design (CCD) technique were used to optimize the three key process parameters (i.e., pressure, temperature and holding time) of the high-hydrostatic-pressure (HHP) processing either standalone or combined with moderate thermal processing to modulate molecular structures of β-lactoglobulin (β-Lg) and α-lactalbumin (α-La) with reduced human IgE-reactivity. The RSM model derived for HHP-induced molecular changes of β-Lg determined immunochemically showed that temperature (temp), pressure (p²) and the interaction between temperature and time (t) had statistically significant effects (p < 0.05). The optimal condition defined as minimum (β-Lg specific) IgG-binding derived from the model was 505 MPa at 56 °C with a holding time of 102 min (R² of 0.81 and p-value of 0.01). The validation carried at the optimal condition and its surrounding region showed that the model to be underestimating the β-Lg structure modification. The molecular change of β-Lg was directly correlated with HHP-induced dimerization in this study, which followed a quadratic equation. The β-Lg dimers also resulted in the undetectable human IgE-binding.

Effect of Soluble Solids and High Pressure Treatment on Rheological Properties of Protein Enriched Mango Puree

The effects of high pressure treatment on the rheological properties of protein enriched mango puree were evaluated. In the first part, the original soluble solids in mango puree (28° Brix) was lowered to 26, 23 and 20° Brix, and each was supplemented with 2, 5 and 8% of whey protein to assess the influence of added protein. The samples were then evaluated by dynamic rheology. Pressure treatment resulted in a progressive increase in elastic (G') and viscous modulii (G″) as well as complex viscosity (η*). Values of G' were higher than G″ demonstrating that the product behaved more like a gel. Additional tests were carried out by simultaneously varying protein and soluble solids contents, and keeping the total solids at 28%. In this case, the effects of pressure levels and holding times were similar to previous results. However, the positive effects of higher protein were negated by the negative effects of lower soluble solids, resulting in an overall decreasing effect on rheology. The developed models effectively predicted the combined influence of protein and soluble solid concentrations on rheological parameters (R2 > 0.85). Sensory evaluation of 2% and 5% protein supplemented and pressure treated (500 MPa/3 min) mango puree yielded acceptable sensory qualities, resulting in a product with enriched protein content.