Establishing the biopolymer ratio of whey protein–pectin complexes before and after thermal stabilisation

Rheological and tribological properties of skimmed milk gels: The impact of fish collagen peptides-polysaccharides complexes during acidification

Collagen peptides (CP) are widely utilized in dairy products for stabilization, gelation, and fat replacement. However, the mechanism of CP-polysaccharides complexes on the rheology and lubrication properties of skimmed yogurt remains underexplored. This study investigated effects of 0.5 % fish CP and its complexes with chitosan (CS), β-glucan (βG), and sodium hyaluronate (HA) on the structural, rheological, tribological, and sensory attributes of skimmed milk during acidification. Small-angle X-ray scattering revealed acidification at pH 4.6 caused a smoothing of high-q features, suggesting casein micelles aggregation and a more homogeneous gel structure. Microscopic analyses indicated CP addition, particularly with βG (CP-βG, 8:2 & 6:4), improved gel continuity and reduced syneresis, thereby enhancing creaminess and smoothness. Conversely, the CS addition and elevated HA concentrations disrupted the casein network, increasing syneresis due to polyelectrolyte complex formation and bridging flocculation. These findings suggested specific CP-polysaccharides combinations could potentially improve the quality of skimmed yogurt.

Advantages of UHT in retaining coconut milk aroma and insights into thermal changes of aroma compounds

Coconut milk products are susceptible to bacterial damage, necessitating sterilization methods that often compromise nutrient and aroma integrity. This study investigates the effects of different thermal sterilisation methods on coconut milk aroma using headspace gas chromatography-ion mobility spectrometry (HS-GC-IMS) and headspace solid-phase microextraction gas chromatography-mass spectrometry (HS-SPME-GC-MS). We assessed the impact of pasteurisation (PAS, 70 °C, 25 min), high-temperature sterilisation (HTS, 121.1 °C, 15 min), and ultra-high temperature sterilisation (UHT, 130 °C, 5 s) through clustered heat maps and correlation analyses. Significant differences were observed (p < 0.05), with 37 and 52 substances detected by HS-GC-IMS and HS-SPME-GC-MS, respectively, identifying 12 key aroma compounds. UHT treatment primarily reduced 8 acids, maintaining a compositional structure and sensory profile similar to raw coconut milk. PAS and HTS treatments decreased the sensory intensity of overall coconut milk aroma, creamy, and floral notes, correlating with the presence of 2-heptanol, nonanal, 4-methylvaleric acid, and 2-tridecanone. These methods increased cooked notes, associated with 5-methyl-3-heptanone, 3-butyn-1-ol, hydroxyacetone, and acetoin. Rancidity was linked to acids such as isobutyric acid, isovaleric acid, and heptanoic acid, with high temperatures effectively reducing these compounds. Prolonged temperature changes in PAS and HTS accelerated lipid oxidative degradation and the Maillard reaction, involving free fatty acids in the formation of alcohols, aldehydes, esters, and lactones. These findings provide a theoretical basis for studying coconut milk flavour deterioration.

Effect of high acyl gellan gum and pH on the structural and foaming properties of heated whey protein suspensions

Effects of association between high-acyl gellan gum and whey protein on heat-induced aggregation and foaming properties of aggregates were assessed in aqueous suspensions. Associative complexes were identified by turbidity and colloidal charge below pH 6, and a balance of charge in the complexes was achieved at pH 5 with a 5:1 protein:polysaccharide ratio. As gellan gum content increased, size of aggregates formed by heating at pH 5 decreased (>1000 nm to 200-300 nm). Microscopy showed polysaccharide chains adhered to spherical aggregates at pH 5 and 6. Gellan gum added to protein before heating did not increase foam volume yet doubled foam half-life at pH 5 when used at a 2:1 protein-to-polysaccharide ratio. Microscopy showed that protein aggregates with attached gellan gum were present in drained foams. These findings indicate that gellan gum improves foam stability of heated whey protein at pH 5 by reducing aggregate size and adhering to aggregates.

Improving the colloidal stability of pectin-phycocyanin complexes by increasing the mixing ratio

In the food industry, the phycobiliprotein phycocyanin acts as a color pigment or the functional part of the superfood "Spirulina." It is industrially extracted from Arthrospira platensis. Current scientific research is focusing on finding complex partners with the potential to stabilize phycocyanin against its sensitivity toward heating and pH changes. Less attention is paid to the factors that influence complexation. This study focuses on the mixing ratio of phycocyanin with pectin. Phycocyanin concentration was fixed, and the mixing ratios ranged from 0.67 to 2.50 (pectin:phycocyanin). All samples were analyzed for their color, size, microscopic structure, zeta potential, and sedimentation stability before and after heating at 85°C. It was found that increasing the pectin content fostered the initial interactions with the protein and chromophore, resulting in a color shift from blue to turquoise. The size of the complexes decreased from several micrometers to nanometers with increasing pectin concentration. Those smaller complexes that were formed at a mixing ratio of 2.5 showed a higher colloidal stability over a period of ∼2 days. It is suggested that at a low mixing ratio (0.67), phycocyanin cannot be completely entrapped within the complexes and attaches to the complex surface as well. This results in aggregation and precipitation of the complexes upon heating. With increasing aggregation and consequently size as well as density of the complexes, sedimentation was accelerated. PRACTICAL APPLICATION: Under acidic conditions, as found in many foods and beverages (e.g., soft drinks, hard candy), phycocyanin tends to agglomerate and lose its color. Specifically heating, triggers denaturation, causing phycocyanin to aggregate and lose vital protein-chromophore interactions necessary to maintain a blue color. To prevent precipitation of the phycocyanin-pectin complexes, increasing the amount of pectin to a ratio of at least 2.0 is effective. This illustrates how adjusting the mixing ratio improves stability. Conversely, lower mixing ratios  induce color precipitation, valuable in purification processes. Thus, practical use of biopolymer-complexes, requires determination of the optimal mixing ratio for the desired effect.

Rheological properties of dairy desserts: Effect of rice bran protein and fat content

Rice bran protein (RBP) is an alternative plant protein that can be used in a wide range of foods due to its unique functional, nutritional, and hypoallergenic properties. The interactions of RBP with other biopolymers have revealed its feasibility for application in dairy products such as whipped cream and dairy desserts. Therefore, the effects of RBP and fat content on the rheological properties of dairy desserts were investigated. The pH value was not influenced by protein, but the nonfat milk solid content was changed by fat and protein content. All the desserts showed thixotropic properties which were mainly related to the molecular disentanglement at high shear rates. By increasing fat like RBP, the apparent viscosity (η_a ) was increased. Rheological parameters such as n value, thixotropic index, storage (G'), and loss moduli (G'') were increased by RBP. Moreover, the dairy desserts containing RBP and whole milk presented generally higher G', G'', complex modulus, and complex viscosity values, and lower tan δ values. The RBP enriched samples also had a higher hardness and gumminess. Syneresis was decreased by RBP, which was related to the formation of ordered mesh-like structures which enabled the entrapment of more water. There was a positive correlation between the rheological, textural, and physical properties of the dessert with added RBP, and therefore dairy dessert attributes can be improved along with fat reduction. However, a sensory evaluation is needed to unravel the acceptability rate of RBP in fat reduction from the view point of consumers. PRACTICAL APPLICATION: Rice bran protein (RBP) has nutritional and hypoallergenic properties which enable it to apply to many products such as dairy desserts. One of the main concerns in dairy technology is the growing interest in low-fat products due to health problems. RBP showed unique properties which makes the creamy behavior. The rheological results have elucidated the creaminess associated with RBP and can assist in the proper simulation of mouthfeel.

The complex of whey protein and pectin: Interactions, functional properties and applications in food colloidal systems - A review

This review describes the mechanism of non-covalent/covalent interaction of whey protein-pectin (WPP) complexes, including electrostatic interaction, steric hindrance, cross-linking and Maillard reaction. The interaction between whey protein and pectin determines the form of the complex in the system, i.e. co-dissolution, precipitation, separation, complex coacervation and compounding. The interaction of WPP is affected by environmental conditions and its own properties, including several factors such as pH, polymer concentration and ratio, temperature, and ionic strength. In addition, the functional properties of WPP complexes are discussed through illustrative examples. The complexes with good emulsification, heat stability, gelling properties and biological activity have promising application prospects. WPP complexes have been widely studied for application in food colloidal systems, including protein beverages, delivery systems for bioactive substances, fat substitutes and food preservation films/coatings. The understanding of the interaction and functional properties of WPP complexes provides theoretical support for the improvement and design of new food colloidal systems.

Physical properties of UHT light cream: impact of the high-pressure homogenization and addition of hydrocolloids

The beneficial effects of a healthy diet on the quality of life have prompted the food industry to develop low-fat variants, but fat content directly affects the physicochemical and sensory properties of food products. The utilization of high-pressure homogenization (HP) and incorporation of hydrocolloids have been suggested as strategies to improve the physical stability and rheological properties of light cream. Thus, this study aims to analyze the associated effect of high-pressure homogenization (80 MPa) and three different hydrocolloids: microcrystalline cellulose, locust bean gum and xanthan gum, on emulsion stability and rheological properties of ultra-high-temperature (UHT) light cream (ULC) with a 15% w/w fat content. The stability of ULC was determined by the ζ potential of oil droplets and emulsion stability percentage. Rheological characterization was based on flow behavior tests and dynamic oscillatory measurements, which were carried out in a rheometer. Results showed that the high-pressure homogenization process did not influence the emulsion stability of the treatments. Moreover, the hydrocolloids added to systems present weak interactions with milk proteins since all ULC showed macroscopical phase separation. The samples presented the same rheological behavior and were classified as pseudoplastic fluids (n < 1). ULC treated at 80 MPa was significantly (P ≤ 0.05) more consistent than the treatments at 20 MPa. All ULC showed a predominant elastic behavior (G' > G″), and a remarkable increase in both G' and G″ at 80 MPa. The results presented in this study highlight the potential of HP for altering some rheological characteristics of UHT light cream, for example, to increase its consistency. These results are important for the dairy industry and ingredient suppliers, in the standardization of UHT light cream and/or to develop low-fat products.

Assessing Whey Protein Sources, Dispersion Preparation Method and Enrichment of Thermomechanically Stabilized Whey Protein Pectin Complexes for Technical Scale Production

Whey protein pectin complexes can be applied to replace fat in food products, e.g., pudding and yogurt, contributing to creaminess while adding a source of protein and fiber. Production of these complexes is usually conducted on the laboratory scale in small batches. Recently, a process using a scraped-surface heat exchanger (SSHE) has been employed; however, dispersion preparation time, feasibility of using different whey protein sources and enrichment of the complexes for subsequent drying have not been assessed. Preparing whey protein pectin dispersions by solid mixing of pectin and whey protein powders resulted in larger complexes than powders dispersed separately and subsequently mixed after a hydration time. Dispersions without hydration of the mixed dispersions before thermomechanical treatment had the largest particle sizes. The targeted particle size of d_90,3 < 10 µm, an important predictor for creaminess, was obtained for five of the six tested whey protein sources. Dispersions of complexes prepared using whey protein powders had larger particles, with less particle volume in the submicron range, than those prepared using whey protein concentrates. Efficiency of complex enrichment via acid-induced aggregation and subsequent centrifugation was assessed by yield and purity of protein in the pellet and pectin in the supernatant.

Short communication: The effect of pectin and sodium alginate on labans made from camel milk and bovine milk

Camel milk (CM) is gaining scientific attention due to its potential health and therapeutic benefits. Fermented drinkable yogurts (labans) were prepared from CM and bovine milk (BM) using mixed Streptococcus thermophilus and Lactobacillus delbrueckii ssp. bulgaricus bacteria supplemented with 1 of 2 hydrocolloids: pectin (0.1-0.3%) or sodium alginate (0.1-0.5%). The different labans were compared by studying their acidity and rheology as well as their structural and sensory properties. The CM and BM labans had titratable acidity values that ranged from 0.85 to 1.27 and 0.61 to 0.93%, respectively. Pectin at 0.2% enhanced the rheological properties of BM labans, but had no effect in CM labans. Sodium alginate at 0.3% and 0.5% increased viscosity, elastic or storage modulus (G'), and viscous or loss modulus (G″) values for both types of laban. Scanning electron microscopy indicated that the CM laban contained lower levels of "spike-like structures" than BM laban, and that the addition of hydrocolloids improved this effect. Quantitative descriptive sensory analysis showed that CM labans fortified with either 0.2% pectin or 0.3% sodium alginate were comparable to commercial BM laban in viscous mouthfeel. Fortified CM labans were more acidic and had stronger flavors than unfortified samples. Overall, this study demonstrated that the addition of sodium alginate or pectin at intermediate levels permits production of palatable CM labans of a satisfactory viscous consistency.

Exceptional colloidal stability of acidified whey protein beverages stabilized by soybean soluble polysaccharide

Protein-rich beverages have gained significant attention in recent years. It is a challenge to produce whey protein beverages with high stability, good transparency, and a smooth mouthfeel. The polysaccharide (PS)-protein complex might help the food industry overcome these obstacles. In this study, soybean soluble polysaccharide (SSPS) and high methoxylated pectin (HMP, a traditional PS) are used, at different ratios to the protein, to improve the colloidal stability of the acidified whey protein solution. Both heated and unheated complexes were studied. SSPS-whey protein complexes have shown exceptional stabilities in all ratios while HMP-whey protein complexes revealed coacervation after 72 hr of storage. The prepared complexes exhibited comparable sizes and ζ-potentials. The SSPS-whey protein complexes were less turbid than HMP-whey protein complexes at similar PS to protein ratios. Results also show that greater repulsive interactions occurred in SSPS-whey protein complexes when compared to HMP-whey protein complexes, as examined by free thiol content and intrinsic fluorescence intensity measurements. PRACTICAL APPLICATION: It is a challenge to produce whey protein isolate (WPI) beverages with high stability, good transparency, and smooth mouthfeel. The polysaccharide (PS)-protein complex might help the food industry overcome these obstacles. We have demonstrated that soybean soluble polysaccharide (SSPS), at [SSPS]:[acWPI] ratios of 1:2 to 1:30, can significantly improve the colloidal stability of the acidified whey protein beverages. This SSPS-whey protein system could be used as a stable beverage base for a variety of beverages.

Use of molecular interactions and mesoscopic scale transitions to modulate protein-polysaccharide structures

Mixed protein-polysaccharide structures have found widespread applications in various fields, such as in foods, pharmaceuticals or personal care products. A better understanding and a more precise control over the molecular interactions between the two types of macromolecules leading to an engineering of nanoscale and colloidal building blocks have fueled the design of novel structures with improved functional properties. However, these building blocks often do not constitute the final matrix. Rather, further process operations are used to transform the initially formed structural entities into bulk matrices. Systematic knowledge on the relation between molecular structure design and subsequent mesoscopic scale transitions induced by processing is scarce. This article aims at establishing a connection between these two approaches. Therefore, it reviews not only studies on the underlying molecular interaction phenomena leading to either a segregative or associative phase behavior and nanoscale or colloidal structures, but also looks at the less systematically studied approach of using macroscopic processing operations such as shearing, heating, crosslinking, and concentrating/drying to transform the initially generated structures into bulk matrices. Thereby, a more comprehensive look is taken at the relationship between different influencing factors, namely solvent conditions (i.e. pH, ionic strength), biopolymer characteristics (i.e. type, charge density, mixing ratio, biopolymer concentration), and processing parameters (i.e. temperature, mechanical stresses, pressure) to generate bulk protein-polysaccharide matrices with different morphological features. The need for a combinatorial approach is then demonstrated by reviewing in detail current mixed protein-polysaccharide applications that increasingly make use of this. In the process, open scientific questions that will need to be addressed in the future are highlighted.