Steady/dynamic rheological characterization and FTIR study on wheat starch-sage seed gum blends

A comparative study on the gel and structural characteristics of starch from three rice varieties when combined with Mesona chinensis polysaccharides

Mesona chinensis polysaccharide (MCP) has excellent gel-forming characteristic, previous studies showed that MCP could affect the gelling and structural properties of rice starch, but the effect of MCP on rice starch from different types is not clarified. In this study, the effects of MCP on the pasting, rheological, and structural characteristics of glutinous rice starch (GRS), japonica rice starch (JRS), and indica rice starch (IRS) were investigated. The results showed that GRS-MCP has the best viscosity, its peak and final viscosities are higher than JRS-MCP and IRS-MCP. The gel network structure was enhanced by MCP in the order of IRS > JRS > GRS, which was reflected by greater elasticity, higher gel strength and hardness, and less free water in JRS-MCP and IRS-MCP. MCP also enhanced the ordered structure and thermal stability of the three starch gels, which is conducive to their application in the market. These findings provide new theoretical insights to produce rice starch-based foods.

V-type granular starches prepared by maize starches with different amylose contents: An investigation in structure, physicochemical properties and digestibility

V-type granular starches (VGSs) were prepared via an ethanol-alkaline (EA) method using maize starch with different amylose contents, specifically, high amylose (HAM), normal maize starch (MS), and waxy maize starch (WS). The X-ray diffraction pattern of the native starch was completely transformed into a V-type pattern after the EA treatment, indicating a structural change in the starch granules. The VGSs prepared by HAM had highest relative crystallinity (31.8°), while the VGSs prepared by WS showed amorphous diffraction pattern. Excessive NaOH, however, would disrupt the formation of V-type structures and cause granular shape rupture. The quantity of double-helical structures, particularly those formed by amylopectin at the starch granules' periphery, significantly decreased. Conversely, single-helical structures formed by amylose increased. A notable rise in the relative crystallinity of V crystals. Four VGS samples, characterized by granular integrity, were chosen for the next investigation of physicochemical and digestive properties. VGS prepared from HAM exhibited higher granular integrity, lower cold-water swelling extent (59.0 and 161.0 cP), improved thermal stability (the value of breakdown as lower as 57.67 and 186.67 cP), and higher resistance to digestion (RS content was up to 10.38 % and 9.00 % higher than 5.86 % and 5.66 % of VGS prepared from WS and MS). The results confirmed that amylose content has a substantial impact on the microstructural and physicochemical properties of VGSs.

3D printed arrowroot starch-gellan scaffolds for wound healing applications

Skin, the largest organ in the body, blocks the entry of environmental pollutants into the system. Any injury to this organ allows infections and other harmful substances into the body. 3D bioprinting, a state-of-the-art technique, is suitable for fabricating cell culture scaffolds to heal chronic wounds rapidly. This study uses starch extracted from Maranta arundinacea (Arrowroot plant) (AS) and gellan gum (GG) to develop a bioink for 3D printing a scaffold capable of hosting animal cells. Field emission scanning electron microscopy (FE-SEM) and X-ray diffraction analysis (XRD) prove that the isolated AS is analogous to commercial starch. The cell culture scaffolds developed are superior to the existing monolayer culture. Infrared microscopy shows the AS-GG interaction and elucidates the mechanism of hydrogel formation. The physicochemical properties of the 3D-printed scaffold are analyzed to check the cell adhesion and growth; SEM images have confirmed that the AS-GG printed scaffold can support cell growth and proliferation, and the MTT assay shows good cell viability. Cell behavioral and migration studies reveal that cells are healthy. Since the scaffold is biocompatible, it can be 3D printed to any shape and structure and will biodegrade in the requisite time.

Development of carboxymethyl cellulose-based nanocomposite incorporated with ZnO nanoparticles synthesized by cress seed mucilage as green surfactant

This study aimed to enhance carboxymethyl cellulose (CMC)-based films by incorporating zinc oxide nanoparticles (ZnO NPs) and cress seed mucilage (CSM), with a view to augmenting the physical, mechanical, and permeability properties of the resulting nanocomposite films. For the first time, CSM was exploited as a green surfactant to synthetize ZnO NPs using hydrothermal method. Seven distinct film samples were meticulously produced and subjected to a comprehensive array of analyses. The findings revealed that the incorporation of CSM/ZnO-5 % improved the physical properties of the films, demonstrating a significant reduction in moisture content and water vapor permeability (WVP). Increasing the concentration of NPs in conjunction with CSM markedly decreased the solubility of the nanocomposites by up to 56 %. The films containing CSM/ZnO showed higher tensile strength and elongation at the break values. The UV absorption of the films exhibited a substantial rise with the addition of ZnO NPs, particularly with an increased content in the presence of CSM. The thermal stability of nanocomposites containing a high concentration of CSM/ZnO exhibited an improvement compared to the control sample. In light of these results, the CMC/CSM/ZnO-5 % film emerges as a promising candidate for a biocompatible packaging material, exhibiting favorable physical characteristics.

Synergistic effect of enzymatic pre-treatment and amylose-lipid complex construction on the physicochemical properties of maize starch

In this study, the effects of maltogenic amylase (MAA) pre-treatment and starch-fatty acid complex construction on the physicochemical properties of maize starch (MAS) were investigated. The average chain length of MAA-modified MAS was found to decrease from 18.15 to 14.92. Moreover, MAA pre-treatment of starch induced the formation of a V-type complex. This behaviour was demonstrated by the higher diffraction intensity, enzymatic resistance and short-range ordering of the samples pre-treated with MAA compared with unmodified samples. X-ray diffraction and rheological analysis revealed that the re-crystallisation peak intensities and storage modulus of MAA-MAS-lauric acid (LA)/stearic acid (SA) complexes were lower than those of MAA-starches, MAS-LA/SA complexes and control. The rate of starch re-crystallisation was effectively decreased by the combination of MAA pre-treatment and V-type complex construction. The anti-retrogradation (long-term) characteristics of the tested samples were in the following order: MAA-MAS-LA/SA complexes > MAA-starches > MAS-LA/SA complexes > control.

Starch biocomposites preparation by incorporating organosolv lignins from potato crop residues

Plastic wastes accumulated due to food packaging pose environmental threats. This study proposes biopolymeric films containing lignins extracted from potato crop residues (PCR) through organosolv treatment as a green alternative to non-degradable food packaging. The isolation process yielded 43.9 wt% lignins with a recovery rate of 73.5 wt% achieved under optimum conditions at 180 °C with 50 % v/v ethanol. The extracted lignins were then incorporated into a starch matrix to create biocomposite films. ATR-FTIR analysis confirmed interactions between the starch matrix and extracted lignins, and XRD analysis showed the amorphous structure of lignins, reducing film crystallinity. The addition of 1 wt% of extracted lignins resulted in a 87 % reduction in oxygen permeability, a 25 % increase in the thermal stability of the film, and a 78 % enhancement in antioxidant. Furthermore, introducing 3 wt% lignins led to the lowest water vapor transmission rate, measuring 9.3 × 10-7 kg/s·m2. Morphological studies of the films demonstrated a homogeneous and continuous structure on both the surface and cross-sectional areas when the lignins content was below 7 wt%. These findings highlight the potential of using organosolv lignins derived from potato crop residues as a promising additive for developing eco-friendly films designed for sustainable food packaging.

Effect of apple polyphenols on physicochemical properties of pea starch/pulp cellulose nanofiber composite biodegradable films

A pea starch (PS) and pulp cellulose nanofibers (CNF-P) hybrid matrix biodegradable film was prepared using apple polyphenol (AP) as the active substance. SEM and thermogravimetric analyses showed that apple polyphenols could be uniformly distributed and form hydrogen bonds with the matrix, and the increase in crystallinity improved the thermal stability of the films (the final residue of the films increased from 22.66 % to 31.82 %). The TS and EAB of the films reached their maximum values of 11.14 ± 1.73 MPa and 71.55 ± 8.8 %, respectively, at an AP content of 1.5 %. It should be noted that the antioxidant properties of the films were significantly positively correlated with the AP content, and the DPPH radical scavenging rate of the films reached 73.77 % at an AP content of 4.5 %, which was about 49 times higher than that of the control film. The same trend was observed in the UV-vis spectra. In addition, the total color difference and water solubility of the membranes increased from 4.29 ± 0.29 to 31.86 ± 1.90 and from 20.01 ± 0.97 % to 21.70 ± 1.99 %, respectively, and the biodegradability also showed an upward trend. These findings provide a theoretical basis and data support for the development of multifunctional biodegradable food packaging materials.

Incorporation of Lepidium perfoliatum seed gum into wheat starch affects its physicochemical, viscoelastic, pasting and freeze-thaw syneresis properties

This study aimed to investigate the influence of incorporating Lepidium perfoliatum seed gum (LPSG) into wheat starch (WS) at various mixing ratios on its FTIR, DSC, steady and dynamic rheological properties, pasting attributes, syneresis, and particle size distributions characteristics. The interaction between WS and LPSG was purely based on hydrogen-bonding. It was found that the onset (To) and peak (Tp) temperatures of the LPSG-rich mixtures increased by 10 % and 8 %, respectively, while the enthalpy (ΔH) decreased by 70 % compared to WS. A higher LPSG ratio led to a decrease in the frequency dependence of storage modulus (G'), as well as an increase in the pseudoplasticity of the mixtures. The in-shear structural recovery test showed that the rate of recovery (R, %) increased with an increasing LPSG ratio. The pasting results demonstrated that the 9/1 ratio had the highest final viscosity and the lowest relative breakdown. Applying 1 to 5 freeze-thaw cycles resulted in a 50 % to 70 % decrease in syneresis for the 9/1 mixing ratio in comparison to WS, respectively. The incorporation of LPSG into WS resulted in higher static and dynamic magnitudes of yield stress, as well as an increase in particle size when compared to WS.

Effects of three different polysaccharides on the sol gel-behavior, rheological, and structural properties of tapioca starch

The sol-gel behavior of tapioca starch (TS) plays a crucial role in the processing and quality control of flour-based products. However, natural tapioca starch has low gel strength and poor viscosity, which tremendously limits its application. To solve this problem, this study investigated the effects of κ-carrageenan (KC), konjac gum (KGM), and Mesona chinensis Benth polysaccharide (MCP) on the pasting behavior, rheological, and structural properties of tapioca starch. KC, KGM, and MCP significantly increased the viscosity of TS. With the exception of high-concentration KGM (0.5 %), all other blending systems showed decrease in setback. This may be attributed to the stronger effect of the high-concentration KC (0.5 %) and MCP (0.5 %) functional groups interacting with starch. KC, KGM, and MCP effectively improved the dynamic modulus (G' and G") of TS gel and were effective in increasing the gel strength and hardness of TS. The FT-IR analysis indicated that the short-range order of TS was mainly influenced by polysaccharides through non-covalent bonding interactions. Furthermore, it was confirmed that three polysaccharides could form dense structures by hydrogen bonding with TS. Similarly, more stable structure and pore size were observed in the microstructure diagram.

Fabrication and rheological properties of a novel interpenetrating network hydrogel based on sage seed hydrocolloid and globulin from the hydrocolloid extraction by-product

In this study, interpenetrating polymer network hydrogels were developed based on sage seed gum (SSG) and globulin protein (Glo) extracted from the mucilage-free seeds. By combining Glo hydrogel with the SSG network the inherent weak gelation of the single SSG system was compensated. As the fraction of Glo increased, various properties of the interpenetrating polymer network (IPN) hydrogels improved substantially. Electrophoretic analysis under reducing conditions showed that Glo dissociated into subunits of approximately 30 kDa and 20 kDa, suggesting it comprises 11S globulin. FTIR spectrum revealed new peaks at 1645 cm-1 and 1537 cm-1 in the amide I and II regions, respectively, for the IPN hydrogels, indicating interactions between two hydrogel networks. Based on the weight loss measurements, the IPN hydrogels exhibited lower mass loss, particularly at higher Glo fractions up to 6 %. The IPN hydrogels also displayed enhanced elasticity, pseudoelasticity, thixotropy, and creep resistance compared to SSG hydrogel, indicating suitability for food, pharmaceutical, and biomedical applications. More broadly, this research provides a sustainable strategy toward innovative material development while advancing bio-based hydrogels.

Mung Bean Starch and Mung Bean Starch Sheet Jelly: NaCl-Based Characteristics Variation

Empirical evidence indicates that NaCl can improve the quality of mung bean starch sheet jelly (MBSS) when properly incorporated. In this study, by comparison with a sample without NaCl, the influences of NaCl (1.5-8%, w/w) on the physicochemical and structural properties of mung bean starch (MBS) and the quality of MBSS were investigated. MBS with added NaCl had greater gelatinization temperature and pasting parameters but lower gelatinization enthalpy than native MBS. With the addition of NaCl, the drying rate of MBSS first accelerated and then declined in the oven-drying process. The addition of NaCl improved the cooking properties of MBSS but decreased the hardness of cooked MBSS. Rheological results implied that the linear viscoelastic region of cooked MBSS decreased with the NaCl addition, and the storage modulus and tan δ were more frequency-dependent than the loss modulus of cooked MBSS. The addition of NaCl gradually increased the toughness of dried MBSS and the overall acceptability of cooked MBSS. Furthermore, NaCl decreased the structure order degree of starch in MBSS. Correlation analysis demonstrated that the quality of MBSS had a significant correlation with the molecular and lamellar order of starch. Overall, NaCl could improve the quality of MBSS by regulating the thermal, gelatinizing, and structural properties of MBS.

Comparison of quinoa and highland barley derived dietary fibers influence on the physicochemical properties and digestion of rice starch

This study investigated the potential of highland barley and quinoa dietary fibers, rich in β-glucan and pectin respectively, as cost-effective and nutritionally valuable physical modifiers for rice starch (RS). HPAEC revealed differences between the monosaccharide composition of soluble and insoluble dietary fibers sourced from highland barley and quinoa (HSDF, HIDF, QSDF and QIDF). Results from both RVA and DSC analysis revealed that the addition of low amounts of dietary fiber significantly modified the pasting properties of RS. Notably, the addition of quinoa soluble dietary fiber (QSDF) significantly inhibits the formation of a stable gel network in rice starch, even at low concentrations (0.1 %), as confirmed by rheological measurements. Furthermore, the incorporation of QSDF effectively reduces the content of rapidly digestible starch in rice starch by 15.6 % and increases the content of slowly digestible starch, from 23.36 % ± 3.02 % to 31.07 % ± 3.98 %. By leveraging the compositional richness of these fibers, this research opens up novel opportunities for developing functional food products with improved nutritional profiles, as well as for improving texture and reducing glycemic index (GI) in starch-based foods.

Heat-Induced Actuator Fibers: Starch-Containing Biopolyamide Composites for Functional Textiles

This study introduces the development of a thermally responsive shape-morphing fabric using low-melting-point polyamide shape memory actuators. To facilitate the blending of biomaterials, we report the synthesis and characterization of a biopolyamide with a relatively low melting point. Additionally, we present a straightforward and solvent-free method for the compatibilization of starch particles with the synthesized biopolyamide, aiming to enhance the sustainability of polyamide and customize the actuation temperature. Subsequently, homogeneous dispersion of up to 70 wt % compatibilized starch particles into the matrix is achieved. The resulting composites exhibit excellent mechanical properties comparable to those reported for soft and tough materials, making them well suited for textile integration. Furthermore, cyclic thermomechanical tests were conducted to evaluate the shape memory and shape recovery of both plain polyamide and composites. The results confirmed their remarkable shape recovery properties. To demonstrate the potential application of biocomposites in textiles, a heat-responsive fabric was created using thermoresponsive shape memory polymer actuators composed of a biocomposite containing 50 wt % compatibilized starch. This fabric demonstrates the ability to repeatedly undergo significant heat-induced deformations by opening and closing pores, thereby exposing hidden functionalities through heat stimulation. This innovative approach provides a convenient pathway for designing heat-responsive textiles, adding value to state-of-the-art smart textiles.

Investigating the Water Relations in Aqueous Extract Powders of Mango (Mangifera indica) Peel and Seed Waste for Their Use in Food Matrices as a Value-Added By-Product

This study investigated the potential uses of discarded mango peel and seed parts by analyzing their water sorption behavior, hydration kinetics, and stability when converted into extract powders at pH 3 and 10. The results revealed that peel extracts had a higher water adsorption capacity compared with seed extracts due to differences in their composition. Peel extracts were primarily composed of carbohydrates (approximately 75%) with a low protein content, while seed extracts contained fewer carbohydrates (less than 30%) but higher levels of proteins (more than 30%) and lipids. The critical water content for maintaining the glassy state of peel extract powders during storage was found to be 0.025 and 0.032 g of water/g for extracts obtained at pH 3 and 10, respectively. In contrast, the Tg values of seed extracts remained relatively unchanged across different water content levels, suggesting that proteins and lipids inhibited the water's plasticizing effect in the solid matrix. These findings indicate that both mango waste fractions exhibit distinct hygroscopic behaviors, necessitating different approaches to processing and utilization. These extracts hold potential applications for various food products such as beverages, gels, sauces, or emulsions, contributing to the reduction in waste and the creation of value-added products from mango residues.

Gelling and rheological properties of a polysaccharide extracted from Ocimum album L. seed

In this study, a new polysaccharide was isolated from Ocimum album L. seed (OA), and its physicochemical and rheological properties were investigated. Ocimum album polysaccharide (OAP) was an acidic heteropolysaccharide with a molecular weight of 1935 kDa, and it was composed of five types of sugars: mannose (32.95 %), glucose (27.57 %), galactose (19.29 %), rhamnose, (15.96 %) and galacturonic acid (4.23 %). According to the results obtained from Huggins and Kraemer equations, the intrinsic viscosity was 6.9 dL/g in distilled water. The OAP solutions at a concentration between 0.1 and 1.5 %, showed shear-thinning behavior, and the Herschel-Bulkley and Cross models exhibited a high ability to describe the flow behavior of OAP solutions. The apparent viscosity of 1 % OAP solution was decreased in the presence of different concentrations of NaCl (0.1, 0.3, and 0.5 M), at different pHs (3-11), and in temperatures between 5 and 100 °C. Also, the pseudoplastic behavior was observed in all samples. In OAP solutions (0.1-1.5 %), the up and down curves in the shear stress-shear rate diagram did not coincide, which indicated time-dependent (thixotropic) behavior. Although, the thixotropic properties of 1 % OAP solution were weakened with adding NaCl (0.1-0.5 M) and at different pH (3-11). The results obtained from the dynamic oscillatory test showed that the OAP solutions at concentrations higher than 0.1 % had a gel-like behavior, and the viscoelastic moduli (G' and G″) were weakened in the presence of salt and with a change in pH. Also, in the temperature sweep test, the 1 % solution showed the behavior of thermally irreversible gels.

Starch digestion retarded by wheat protein hydrolysates with different degrees of hydrolysis

Wheat protein hydrolysates (WPH) were prepared by pepsin hydrolysis for 30, 60, and 120 min (WPH₃₀, WPH₆₀, and WPH₁₂₀). The mixed system of rice starch and WPH was hydrothermally treated to explore the effect of WPH with different degrees of hydrolysis on starch digestion. WPH reduced the first-order rate coefficient (k) of starch digestion. Especially, WPH₃₀ reduced the k value the most and formed the highest slowly digestible starch content due to the entanglement of starch chains and long-chain peptides. WPH₆₀ and WPH₁₂₀ with more hydrophobic peptides and polar amino acids than WPH₃₀ tended to form hydrogen bonds with starch molecules due to less steric hindrance. Particularly, the complexation of WPH₆₀ promoted the formation of dense aggregate structure and hindered the enzymatic hydrolysis of starch to a certain extent, thereby increasing the resistant starch content. These findings provide significant guidance for the preparation of hypoglycemic reformed food.

Analysis of Starch Structure and Pasting Characteristics of Millet Thick Wine during Fermentation

Starch is the main substrate in millet thick wine (MTW). In order to control the fermentation process of MTW, it is critical to monitor changes in the starch structure and physicochemical characteristics during the fermentation of MTW. In the present study, the structural characteristics of MTW starch were analyzed by scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and rapid viscosity analysis (RVA). The results of SEM and CLSM showed that large starch granules in MTW swelled, developed cavities, and ruptured or even vanished with the prolongation of the fermentation time, whereas the size and shape of small starch granules barely changed, only falling off the pomegranate-seed-like aggregates. With the increase in fermentation time, the relative crystallinity of starch in MTW gradually increased. In addition, the short-range ordered structures underwent complex changes. Changes in the starch morphology and ordered structure led to an increase in the peak viscosity time and the initial gelatinization temperature. The present results reveal the beneficial effect of fermentation on MTW processing and suggest its potential applications in other millet-based fermented products.

Effect of modification by maltogenic amylase and branching enzyme on the structural and physicochemical properties of sweet potato starch

Sweet potato starch (SPSt) was treated sequentially with the combination of maltogenic amylase (MA) and branching enzyme (BE) (MA → BE) or BE and MA (BE→MA) to modify its structural and physicochemical properties. Following the MA → BE and BE→MA modifications, the degree of branching was increased from 12.02 % to 44.06 %; whereas, the average chain length decreased from 18.02 to 12.32. Fourier-transform infrared spectroscopy and digestive performance analysis indicated that the modifications reduced hydrogen bonds and increased resistant starch in SPSt. Rheological analysis revealed that the storage and loss moduli of the modified samples were lower than those of the control samples, except for starch treated with MA alone. X-ray diffraction measurements suggested that the re-crystallisation peak intensities of the enzyme-modified starches were lower than those of the untreated sample. The retrogradation resistance ability of the analysed samples followed the order: BE→MA-starches > MA → BE-starches > untreated starch. The relationship between the crystallisation rate constant and short branched chains (DP_6-9) was well described by linear regression. This study provides a theoretical foundation for retarding the retrogradation of starch, which can improve food quality and extend the shelf-life of enzymatically modified starchy foods.

Structure, thermal stability, and in vitro digestibility of rice starch-protein hydrolysate complexes prepared using different hydrothermal treatments

In this study, rice starch-protein hydrolysate (WPH-S) complexes with high resistant starch (RS) content were prepared by heat-moisture treatment (HMT) and annealing (ANN). The effects of different hydrothermal treatments on the structure and thermal stability of the WPH-S complexes and their relationship with starch digestibility were further discussed. The results showed that RS contents of ANN-WPH-S complexes (35.09-40.26 g/100 g) were higher than that of HMT-WPH-S complexes (24.15-38.74 g/100 g). Under hydrothermal treatments, WPH decreased the hydrolysis kinetic constant (k) of starch form 4.07 × 10^-2-4.63 × 10^-2 min^-1 to 3.29 × 10^-2-3.67 × 10^-2 min^-1. HMT and ANN promoted hydrogen bonding between WPH and starch molecules, thus increasing the molecular size of starch. In addition, the shear stability of WPH-S mixture was improved with the hysteresis loop area decreased after HMT/ANN treatments, resulting in a more stable structure. Most importantly, the hydrothermal treatment made the scatterers of WPH-S complexes denser and the surface smoother. Especially after ANN treatment, the WPH₆₀-S complex formed a denser aggregate structure, which hindered the in vitro digestion of starch to a certain extent. These results enrich our understanding of the regulation of starch digestion by protein hydrolysates under different hydrothermal treatments and have guiding significance for the development of foods with a low glycemic index.

Developing Self-Assembled Starch Nanoparticles in Starch Nanocomposite Films

Starch nanoparticles (SNPs) are synthesized by different precipitation techniques using corn starch, and SNP films are prepared by the evaporation casting method. The morphological study is investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The distribution and sizes of precipitated SNPs after synthesizing are discovered by these methods as well. The crystallinity of the SNPs is studied by the X-ray diffractometry (XRD) method that demonstrates reduction compared to neat starch granules, and it is changed from A-style to V_H-style after precipitation. The chemical bonding of different SNPs after the nanoprecipitation is analyzed by Fourier transform infrared spectroscopy (FT-IR). Thermogravimetric analysis (TGA) demonstrates the decomposition of starch nanoparticles and the starch matrix that is related to the depolymerization of carbon chains in the range of 260 to 350 °C. The mechanical properties of the SNP films versus the temperature changing are discovered by dynamic mechanical analysis (DMA). The water contact angles of SNP films are measured using a goniometer, and the results showed the hydrophobic surfaces of the prepared films. Our study indicates that SNPs have a promising impact on the properties of corn starch films, which would be useful in biodegradable packaging material.

Impact of Konjac Glucomannan with Different Molecular Weight on Retrogradation Properties of Pea Starch

The impact of konjac glucomannan (KGM) with different molecular weight (Mw) on the retrogradation properties of pea starch, such as color, viscoelasticity, gel strength, water holding capacity (WHC), moisture distribution and crystallinity, was investigated. At the same time as the Mw of KGM decreased, the lightness, elastic modulus, gel strength, water freedom and crystallinity of pea starch showed an increasing trend, whereas the viscosity modulus and WHC showed a decreasing trend. At one day of storage, compared with single pea starch, KGM with low Mw made gel strength increase from 40 g to 45 g, WHC decrease from 82% to 65% and crystallinity increase from 21.3% to 24.0%. Therefore, KGM with low Mw could promote retrogradation of pea starch in the short-term. At 7 days or even 14 days of storage, KGM with medium-high Mw had smaller indices than those of pure pea starch, including the lightness, storage modulus, gel strength, water freedom and crystallinity. This indicated that KGM with medium-high Mw could inhibit the long-term retrogradation of starch. The larger the Mw of KGM, the more noticeable the inhibition effect.

Improving bioaccessibility and physicochemical property of blue-grained wholemeal flour by steam explosion

Whole grain contains many health-promoting ingredients, but due to its poor bioaccessibility and processibility, it is not widely accepted by consumers. The steam explosion was exploited to modify the nutritional bioaccessibility and the physicochemical properties of wholemeal flour in this study. In vitro starch digestibility, in vitro protein digestibility of wholemeal flour, total flavonoids content, and total phenolics content of digestive juice were used to evaluate the bioaccessibility, and a significant variation (p < 0.05) was noted. Results showed that steam explosion enhanced the gastric protein digestibility ranged from 5.67 to 6.92% and the intestinal protein digestibility ranged from 16.77 to 49.12%. Steam-exploded wholemeal flour (0.5 MPa, 5 min) had the highest protein digestibility and rapidly digestible starch content. Compared with native flour, steam explosion (0.5 MPa, 5 min) contributed to a 0.72-fold and 0.33-fold increment of total flavonoids content and total phenolics content in digestible juice. Chemical changes of wholemeal flour, induced by steam explosion, caused the changes in the solvent retention capacity, rheological property of wholemeal flour, and altered the falling number (and liquefaction number). An increasing tendency to solid-like behavior and the gel strength of wholemeal flour was significantly enhanced by the steam explosion at 0.5 MPa for 5 min, while the gluten was not weakened. This study indicated that steam-exploded wholemeal flour (0.5 MPa, 5 min) could serve as a potential ingredient with the noticeable bioaccessibility and physicochemical properties in cereal products.

Evidence from Thermal Aging Indicating That the Synergistic Effect of Glyoxal and Sodium Sulfite Improved the Thermal Stability of Conformational Modified Xanthan Gum

Xanthan gum is prone to thermal oxidative degradation, which limits its applications. However, conformational changes in xanthan gum and appropriate stabilizers may improve its thermal stability. Therefore, in this study, we aimed to establish a strategy to maintain the viscosity of xanthan gum during long-term storage at high temperatures. We modified the original strain used for xanthan gum production by genetic engineering and added stabilizers during the production process. The structure and thermal stability of the resulting xanthan gum samples were then determined. Pyruvyl deficiency, combined with the addition of sodium sulfite and glyoxal during the production process, was found to significantly improve the maintenance of viscosity. The apparent viscosity of the new xanthan gum solution remained above 100 mPa·s after being stored at 90 °C for 48 days. Fourier-transform infrared spectra and scanning electron microscopy images showed that pyruvate-free xanthan gum with added stabilizers had more extensive cross-linking than natural xanthan gum. In conclusion, these findings may contribute to the use of xanthan gum in applications that require high temperatures for a long period of time.

Mesona chinensis polysaccharide accelerates the short-term retrogradation of debranched waxy corn starch

The effect of non-starch polysaccharides on the structural and functional properties of native starch have been extensively studied. However, the effect of non-starch polysaccharides on the structural characteristics of debranched starch, a kind of enzymatic modified starch, remains unclear. The aim of this study is to investigate the effects of Mesona chinensis polysaccharide (MP) on starch retrogradation and structural properties of debranched waxy corn starch (DWS). The results showed that only appropriate addition of MP (0.5 or 1%) can effectively promote the short-term retrogradation of DWS, while excessive MP (3 or 5%) had a negative effect. Gel hardness results revealed that the short-term retrogradation (24 h) of DWS could be divided into two phases. The retrogradation of DWS-MP gels mainly occurred at first stage (0–4 h), which was demonstrated by the rapid increase of gel hardness and relative crystallinity in this stage. In the second stage (4–24 h), DWS-MP gels were more likely to undergo the aggregation of starch granules as proved by SEM and particle size results. The degree of short-range ordered decreased during the total retrogradation stage. Overall, this work aims to provide an insight into the effect of non-starch polysaccharides on the short-term retrogradation of DWS.

•

Only the appropriate addition of MP could accelerate the retrogradation of DWS.

•

The short-term retrogradation of DWS could be divided into two stages.

•

Gel hardness and relative crystallinity increased significantly in the first stage.

•

The degree of short-range ordered reduced monotonically with retrogradation time.

•

Starch particles mainly underwent aggregation in the second stage.

Preparation and characterization of hyacinth bean starch film incorporated with TiO2 nanoparticles and Mesona chinensis Benth polysaccharide

Hyacinth bean starch (HBS) was used to prepare nanocomposite films with the reinforcement agent of nanotitanium oxide (TiO₂-N) and Mesona chinensis Benth polysaccharide (MCP). The effects of TiO₂-N and MCP on the moisture combination, rheological properties of film-forming solutions (FFS) and physiochemical properties of films were investigated. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) revealed that HBS, TiO₂-N and MCP had good compatibility, while no novel absorption peak in FTIR spectra, and characteristic peaks of TiO₂-N were found in XRD patterns of composite films. Contact angle of HBS/TiO₂-N/M3 film increased from 65.6° to 90.9°, which illustrated that TiO₂-N and MCP effectively enhanced hydrophobicity of films. TiO₂-N and MCP positively affected anti-UV light ability of HBS films by resisting most of invisible light. Furthermore, stable and compact network structures were formed by the synergistic effect of TiO₂-N and MCP, thereby elongation to break was increased from 17.123% to 28.603% significantly, and heat resistance was enhanced clearly. This study prepared a nanocomposite HBS-based films based TiO₂-N and MCP, which had guiding significance for development of functional films and combination of polysaccharides and metallic oxide.