Structure-digestibility relationship from noodles based on organocatalytically esterified regular and waxy corn starch obtained by reactive extrusion using sodium propionate

Macromolecular, thermal, and nonthermal technologies for reduction of glycemic index in food-A review

Consumers rely on product labels to make healthy choices, especially with regard to the glycemic index (GI) and glycemic load (GL), which identify foods that stabilize blood sugar. Employing both thermal and nonthermal processing techniques can potentially reduce the GI, contributing to improved blood sugar regulation and overall metabolic health. This study concentrates on the most current advances in GI-reduction food processing technologies. Food structure combines fiber, healthy fats, and proteins to slow digestion, reducing GI. The influence of thermal approaches on the physical and chemical modification of starch led to decreased GI. The duration of heating and the availability of moisture also determine the degree of hydrolysis of starch and the glycemic effects on food. At a lower temperature, the parboiling revealed less gelatinization and increased moisture. The internal temperature of the product is raised during thermal and nonthermal treatment, speeds up retrogradation, and reduces the rate of starch breakdown.

Impact of pre-meal immersion on multi-scale structural changes and starch digestibility of cooked dried noodles

Pre-meal immersion is a common process for both the consumption of dried noodles and development of takeaway noodles, but its impact on the structure and digestibility of dried noodles is still unclear. In this study, dried noodles cooked for the optimal time were immersed at 80 °C for different time durations. Multi-scale structural changes, including texture, molecular structure, microstructure, and in vitro starch digestibility were studied using a combination of kinetic (first-order exponential decay function, the Peleg model, and LOS plots), physicochemical, and microscopic analysis. The relationship between multi-scale structural changes and starch digestibility was derived. As the immersion progressed, the hardness first rapidly decayed and then reached equilibrium. The decay rate in the initial stage depended on the gluten content. In most cases, the immersion process caused depolymerization of gluten proteins and further gelatinization of starch granules, which was observed from an increase in the free -SH content and decrease in the short-range ordered structure, although there were fluctuations over immersion time. Structural changes resulted in the corresponding changes in substance migration. However, a high gluten content (∼15% w/w) imparted a denser microstructure to the noodles, weakening the deterioration effects compared with a low gluten content (∼10% w/w). In vitro digestion experiments proved that samples with higher gluten content had higher starch digestion rates and lower starch digestion extent during immersion. Correlation analysis revealed that there was a negative correlation between k1 and the tightness of the gel. This study helps to reveal the structural mechanisms of starch digestibility in cooked noodles during immersion.

Improvement of in vitro digestibility and thermostability of debranched waxy maize starch by sequential ethanol fractionation

This study aimed to improve the in vitro digestibility and thermostability of debranched waxy maize starch (DWMS) by sequential fractionation. Waxy maize starch was debranched by pullulanase, followed by sequential precipitation through controlling the ratio of starch supernatants to ethanol at 1:0.5, 1:1, and 1:1.5 (v/v). Subsequently the structural, thermal, in vitro digestive properties of DWMS were investigated. In vitro digestion results showed that the secondary ethanol fractionation of 1:1 on the basis of the initial fractionation (1:0.5) induced a significant higher amount of slowly digestive starch (SDS, 30.0 %) and resistant starch (RS, 58.6 %) amongst all three fractions, along with the highest peak temperature (Tp, 106.4 °C) and the highest decomposition value (Td, 310.0 °C) in calorimetric (DSC) and thermogravimetry (TGA) measurements. Chain length distribution, surface morphology, and laser confocal micro-Raman spectroscopy (LCM-Raman) analyses revealed that medium (degree of polymerization, DP 13- 36) and long chains (DP ≥37) respectively constituting 72.0 % and 10.2 % of DWMS resulted in the formation of spheroidal crystallites with higher homogeneity and more ordered short-range structures. Overall, this work confirmed that ethanol fractionation is an efficient method for improving the in vitro digestibility and heat stability of waxy maize starch.

Study of unripe and inferior banana flours pre-gelatinized by four different physical methods

This study aimed to prepare the pre-gelatinized banana flours and compare the effects of four physical treatment methods (autoclaving, microwave, ultrasound, and heat-moisture) on the digestive and structural characteristics of unripe and inferior banana flours. After the four physical treatments, the resistant starch (RS) content values of unripe and inferior banana flours were decreased from 96.85% (RS2) to 28.99-48.37% (RS2 + RS3), while C∞ and k values were increased from 5.90% and 0.039 min^-1 to 56.22-74.58% and 0.040-0.059 min^-1, respectively. The gelatinization enthalpy (ΔHg) and I_1047/1022 ratio (short-range ordered crystalline structures) were decreased from 15.19 J/g and 1.0139 to 12.01-13.72 J/g, 0.9275-0.9811, respectively. The relative crystallinity decreased from 36.25% to 21.69-26.30%, and the XRD patterns of ultrasound (UT) and heat-moisture (HMT) treatment flours maintained the C-type, but those samples pre-gelatinized by autoclave (AT) and microwave (MT) treatment were changed to C + V-type, and heat-moisture (HMT) treatment was changed to A-type. The surface of pre-gelatinized samples was rough, and MT and HMT showed large amorphous holes. The above changes in structure further confirmed the results of digestibility. According to the experimental results, UT was more suitable for processing unripe and inferior banana flours as UT had a higher RS content and thermal gelatinization temperatures, a lower degree and rate of hydrolysis, and a more crystalline structure. The study can provide a theoretical basis for developing and utilizing unripe and inferior banana flours.

Potentially Health-Promoting Spaghetti-Type Pastas Based on Doubly Modified Corn Starch: Starch Oxidation via Wet Chemistry Followed by Organocatalytic Butyrylation Using Reactive Extrusion

Extruded spaghetti-type pasta systems were obtained separately either from native or oxidized starch prepared via wet chemistry with the aim of evaluating the effect of oxidation modification of starch. In addition to this, the butyrylation reaction (butyrate (Bu) esterification-short-chain fatty acid) using native or oxidized starch was analyzed under reactive extrusion (REx) conditions with and without the addition of a green food-grade organocatalyst (l(+)-tartaric acid) with the purpose of developing potentially health-promoting spaghetti-type pasta systems in terms of increasing its resistant starch (RS) values. These would be due to obtaining organocatalytic butyrylated starch or not, or the manufacture of a doubly modified starch (oxidized-butyrylated-starch oxidation followed by organocatalytic butyrylation) or not. To this end, six pasta systems were developed and characterized by solid-state ¹³C cross-polarization magic angle spinning nuclear magnetic resonance (CP MAS NMR) spectroscopy, degree of substitution (DS), attenuated total reflectance Fourier transform infrared (ATR/FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), pancreatic digestion, free Bu content analysis and in vitro starch digestibility. The results obtained here suggest that starch oxidation hydrolytically degrades starch chains, making them more susceptible to enzymatic degradation by α-amylase. However, the oxidized starch-based pasta systems, once esterified by Bu mainly on the amylose molecules (doubly modified pasta systems) increased their RS values, and this was more pronounced with the addition of the organocatalyst (maximum RS value = ~8%). Interestingly, despite the checked chemical changes that took place on the molecular structure of starch upon butyrylation or oxidation reactions in corn starch-based spaghetti-type pasta systems, and their incidence on starch digestibility, the orthorhombic crystalline structure (A-type starch) of starch remained unchanged.