Effect of the phytate and hydrogen peroxide chemical modifications on the physicochemical and functional properties of wheat starch

Structural features, physiological functions and digestive properties of phosphorylated corn starch: A comparative study of four phosphorylating agents and two preparation methods

Phosphorylation is an important modification to modulate functional and digestive properties of starches. We systematically investigated starch phosphorylation process parameters by using two different preparation methods (slurry and semi-dry conditions) and four commonly used phosphorylating agents, namely sodium tripolyphosphate (STPP), sodium trimetaphosphate (STMP), STMP/STPP (99: 1), and sodium phytate (SP). The effects of phosphorylation on physicochemical characteristics, techno-functionalities, digestive properties and structural features of corn starch were analyzed. Phosphorylation with the semi-dry method resulted in higher phosphorus content, degree of double helix, and degree of starch aggregation and lower amylose content and relative crystallinity than with the slurry method. Phosphorylation using semi-dry conditions, irrespective of the used phosphorylating agent, furthermore decreased the gelatinization temperature, enthalpy, the temperature corresponding to the maximum starch mass loss rate and estimated glycemic index of corn starch, and increased solubility, swelling power, peak viscosity, transmittance, and resistant starch content. Of the phosphorylating agents, independent of the used preparation method, STMP and STMP/STPP resulted in the highest degrees of starch phosphorylation and therefore modulated the physiochemical, functional and digestive properties of corn starch more than STPP and SP. The findings of this systematic comparison provide important information to tailor phosphorylated corn starches to meet specific food requirements.

Effect of ultrasonic pretreatment on physicochemical, thermal, and rheological properties of chemically modified corn starch

This study investigated the effects of ultrasonic and three chemical individual and dual modification treatments on corn starch's physicochemical, thermal, and rheological properties. Ultrasonication and the three chemical treatments disrupted the starch granules with a decrease in particle size and a significant increase in the ζ-potential. The hydrophilicity of ultrasonic-oxidized dual-modified starch (U-O-CS) was the highest, at 0.854 g/g. The lipophilicity of ultrasonic-esterified dual-modified starch (U-E-CS) was the highest, at 1.485 g/g. The gelatinization temperature of ultrasonic, oxidation, and cross-linking modified starches increased significantly, with cross-linking starches being the largest. Oxidative treatment significantly decreased the starch's G' and G" and weakened the textural properties. The rheological properties of U-O-CS were further weakened. The G' of the starch decreased after the esterification treatment, while the G" increased, and the textural properties were cut. The maximum rheological and textural properties were obtained for crosslinked modification, with a hardness value of 284.70 g.

The combined application of organic and inorganic fertilizers improved the quality of colored wheat by physicochemical properties and rheological characteristics of starch

Excessive use of nitrogen fertilizer can degrade the quality of wheat grain, while appropriate use of organic fertilizer can enhance starch quality. To clarify the effects of chemical fertilizer and organic fertilizer on wheat quality. We measured indicators such as amylose content, starch granules, starch structure, gelatinization characteristics, and rheological properties of wheat under different proportions of combined application of organic fertilizer and chemical fertilizer, revealing the effects of combined application of organic fertilizer and chemical fertilizer on the physicochemical properties and structure of starch. The results showed that compared with single application of chemical fertilizer (T1), organic fertilizer instead of 30 % fertilizer (T2) significantly increased amylose content (10.13 %), starch solubility (35.54 %, 90 °C), swelling power (7.40 %, 90 °C) and wheat yield (18.78 %), but decreased relative crystallinity (37.40 %) and order degree of starch, resulted in a decrease in gelatinization temperature (3.27 %). Meanwhile, rheological analysis also proved that the starch under T2 showed strong elasticity and hardness. This research highlights the importance of organic fertilizer for grain quality and propose that replacing 30 % of chemical fertilizer with organic fertilizer could significantly enhance the starch structure of colored wheat, providing theoretical support for the improvement of wheat quality.

High water resistance starch based intelligent label for the freshness monitoring of beverages

The traditional starch-based intelligent freshness labels struggle to maintain long-term structural stability when exposed to moisture. To solve this problem, we prepared composite crosslinked labels using phytic acid for double crosslinking of corn starch and soybean isolate proteins, with anthocyanin serving as the chromogenic dye. The mechanical properties, hydrophobic characteristics, and pH responsivity of these crosslinked labels were assessed in this study. The prepared double-crosslinked labels showed reduced moisture content (15.96%), diminished swelling (147.21%), decreased solubility (28.55%), and minimized water permeability, which suggested that they have enhanced hydrophobicity and densification. The crosslinked labels demonstrated the ability to maintain morphological stability when immersed in water for 12 h. Additionally, the mechanical properties of the crosslinked labels were enhanced without compromising their pH-sensing capabilities, demonstrated a color response visible to the naked eye for milk and coconut water freshness monitoring, suggesting great potential for application in beverages freshness monitoring.

Effects of ultrasonic and chemical dual modification treatments on the structural, and properties of cornstarch

This study aimed to explore the changes in the structural and functional properties of cornstarch modified by oxidation, esterification, and cross-linking under ultrasonic pretreatment. FT-IR and XRD characteristic peaks revealed successful access to chemical functional groups. Both ultrasonic and the three chemical treatments eroded the surface of starch granules, reducing their particle size and increasing their RC. Meanwhile, the destruction of the granules was further enhanced by the dual modification treatments. The ultrasonic pretreatment synergized and improved the swelling power, solubility, and translucency of all three chemical treatments. Further, it improved the poorer freeze-thaw stability of cross-linked starch, resulting in a lower water precipitation rate. In addition, both ultrasonic and chemical treatments significantly decreased RDS and SDS, and increased RS content. The ultrasonic-chemical dual modification had a synergistic effect on in vitro digestibility, resulting in a further increase in RS. In conclusion, this study provided ideas for developing new starch modification technology and deep processing of cornstarch, expanding its application areas and thus meeting the different needs of starch-based products.

Optimization of 4,6-α and 4,3-α-Glucanotransferase Production in Lactococcus lactis and Determination of Their Effects on Some Quality Characteristics of Bakery Products

In this study, the production of 4,6-α (4,6-α-GTase) and 4,3-α-glucanotransferase (4,3-α-GTase), expressed previously in Lactococcus lactis, was optimized and these enzymes were used to investigate glycemic index reduction and staling delay in bakery products. HP-SEC analysis showed that the relevant enzymes were able to produce oligosaccharides from potato starch or malto-oligosaccharides. Response Surface Methodology (RSM) was used to optimize enzyme synthesis and the highest enzyme activities of 15.63 ± 1.65 and 19.01 ± 1.75 U/mL were obtained at 1% glucose, pH 6, and 30 °C for 4,6-α-GTase and 4,3-α-GTase enzymes, respectively. SEM analysis showed that both enzymes reduced the size of the starch granules. These enzymes were purified by ultrafiltration and used to produce bread and bun at an enzyme activity of 4 U/g, resulting in a decrease in the specific volume of the bread. It was found that the estimated glycemic index (eGI) of bread formulated with 4,6-α-GTase decreased by 18.01%, and the eGI of bread prepared with 4,3-α-GTase decreased by 13.61%, indicating a potential delay in staling. No significant differences were observed in the sensory properties of the bakery products. This is the first study showing that 4,6-α-GTase and 4,3-α-GTase enzymes have potential in increasing health benefits and improving technological aspects regarding bakery products.

Multiscale structure-property relationships of oxidized wheat starch prepared assisted with electron beam irradiation

In this study, two promising eco-friendly modification techniques, electron beam (EB) irradiation and hydrogen peroxide (H₂O₂) oxidation, were used to prepare oxidized wheat starch. Neither irradiation nor oxidation changed starch granule morphology, crystalline pattern, and Fourier transform infrared spectra pattern. Nevertheless, EB irradiation decreased the crystallinity and the absorbance ratios of 1047/1022 cm^-1 (R_1047/1022), but oxidized starch exhibited the opposite results. Both irradiation and oxidation treatments reduced the amylopectin molecular weight (Mw), pasting viscosities, and gelatinization temperatures, while increasing the amylose Mw, solubility and paste clarity. Notably, EB irradiation pretreatment dramatically elevated the carboxyl content of oxidized starch. In addition, irradiated-oxidized starches displayed higher solubility, paste clarity, and lower pasting viscosities than single oxidized starches. The main reason was that EB irradiation preferentially attacks the starch granules, degrades the starch molecules, and depolymerizes the starch chains. Therefore, this green method of irradiation-assisted oxidation of starch is promising and may promote the appropriate application of modified wheat starch.

Phosphorylation and citration of normal corn starch by dry heating with phytic acid and citric acid

Normal corn starch was subjected to dry heating in the presence of phytic acid (PA, 2 %, starch basis) and citric acid (CA, 5 % and 10 %) for modification. Dual treatment with PA and CA induced structural and physicochemical changes in normal corn starch. Phosphorus concentration, degree of substitution, FTIR, and ³¹P NMR analyses confirmed esterification of starch by dry heating with PA and CA. Both phosphorylation and citration by esterification with PA and CA were observed in PA + 5CA starch, but high CA concentration inhibited covalent interaction between PA and starch in PA + 10CA starch. The degree of phosphorylation and citration resulted in different physicochemical properties in starch treated with PA and CA. The treatment with only PA did not change the crystalline regions of PA starch, but CA treatment induced the disruption of the crystalline structure of PA + 5CA and PA + 10CA starch. PA starch showed high solubility (46.41 %) and transmittance (90.51 %), but dual treatment of PA and CA induced significant decrease in solubility (3.23 %) and transmittance (2.18 %) of PA + 10CA starch. CA treatment increased the fraction of resistant starch in non-cooked (72.44 %) and cooked PA + 10CA starch (42.76 %). Therefore, dual treatment with PA and CA had potential to control physicochemical and functional properties of starch by phosphorylation and citration of starch.

Effects of Enzymatic Modification and Cross-Linking with Sodium Phytate on the Structure and Physicochemical Properties of Cyperus esculentus Starch

In this study, C. esculentus porous starch (PS) and C. esculentus cross-linked porous starch (CPS) were prepared by enzymatic modification and sodium phytate cross-linking, and their physicochemical and structural properties were determined. The results showed that the adsorption and emulsification capacities of PS were 1.3606 g/g and 22.6 mL/g, respectively, which were significantly higher than 0.5419 g/g and 4.2 mL/g of C. esculentus starch (NS). The retrogradation curves of starch paste showed that the stability of PS was inferior to that of NS. In addition, the results of texture analysis showed that the gel strength of PS was also significantly reduced relative to NS. The PS exhibited a rough surface with pores and low molecular order and crystallinity according to scanning electron microscope (SEM), fourier infrared spectroscopy (FTIR), and X ray diffractometer (XRD) analyses. As compared to PS, CPS still presented a high adsorption capacity of 1.2744 g/g and the steadiness of starch paste was significantly better. XPS demonstrated the occurrence of the cross-linking reaction. Our results show that enzyme modification and dual modification by combining enzymatic treatment with sodium phytate cross-linking can impart different structures and functions to starch, creating reference material for the application of modified starch from C. esculentus.

Impact of microwave irradiation on chemically modified talipot starches: A characterization study on heterogeneous dual modifications

In this study, the effect of chemical modifications such as oxidation, esterification and crosslinking was investigated alone and in combination with microwave irradiation on a non-conventional starch with 76% starch yield acquired from the trunk of matured talipot palm. The single- and dual-modifications imparted significant changes in the morphological, crystalline, pasting and rheological properties and digestibility of talipot starch. Characteristic peaks were observed in single- and dual-oxidized, esterified and crosslinked starches indicating their respective functional groups. All modifications significantly decreased (p ≤ 0.05) the relative crystallinity (RC) of talipot starches except for crosslinking, and the least RC (11.33%) was observed in microwave irradiated esterified starch. Microwave irradiation prior to chemical modifications showed a significant impact in the swelling and solubility of talipot starches. The decreased setback viscosity and increased light transmittance in single- and dual-microwave irradiated talipot starches showed their lowered retrogradation tendency, suitable for frozen foods. The resistant starch (RS) content was majorly improved in all heterogeneously dual modified talipot starches by incorporating more functional groups owed to structural and crystalline destruction in starch granules upon microwave irradiation. The highest RS content (45.02%) was observed in microwave irradiated esterified uncooked talipot starch.

Characterization and properties of singly and dually modified hydrogen peroxide oxidized and glutaraldehyde crosslinked biodegradable starch films

Poor properties of native cassava starch film such as low mechanical properties and high water uptake are the limitations of biodegradable starch films. Dual modification is an alternative way to improve the properties. Characteristics and properties of oxidized, crosslinked and dually modified starch films by hydrogen peroxide oxidation and glutaraldehyde crosslinking were examined. Sequence of the dual modification was also studied. All starch films were prepared by casting technique using glycerol plasticizer. The oxidation and crosslinking of modified starch were confirmed by carbonyl and carboxyl contents as well as degree of crosslinking. The lowest and highest molecular weights of the modified starch were observed for the oxidized starch and crosslinked starch, respectively. Moreover, swelling power and moisture absorption of dually modified starch films was clearly lower than those of singly modified films. Additionally, both good stiffness and extensibility was also obtained from the dually modified films especially for the crosslinked-oxidized film. Moreover, thermal property and biodegradability were also determined.

Flame Retardant Functionalization of Microcrystalline Cellulose by Phosphorylation Reaction with Phytic Acid

The functionalization of microcrystalline cellulose (MCC) is an important strategy for broadening its application fields. In the present work, MCC was functionalized by phosphorylation reaction with phytic acid (PA) for enhanced flame retardancy. The conditions of phosphorylation reaction including PA concentration, MCC/PA weight ratio and temperature were discussed, and the thermal degradation, heat release and char-forming properties of the resulting PA modified MCC were studied by thermogravimetric analysis and pyrolysis combustion flow calorimetry. The PA modified MCC, which was prepared at 90 °C, 50%PA and 1:3 weight ratio of MCC to PA, exhibited early thermal dehydration with rapid char formation as well as low heat release capability. This work suggests a novel strategy for the phosphorylation of cellulose using PA and reveals that the PA phosphorylated MCC can act as a promising flame retardant material.

Dual modification of various starches: Synthesis, properties and applications

The problems associated with native starches (NSs) and single modified starches were stated in order to justify dual modification of various starches. Broadly, there are two types of dual modification, i.e., homogeneous dual modification and heterogeneous dual modification. The combination of two physical modifications, e.g., (extrusion/annealing); two chemical modifications, e.g., (succinylation/cross-linking) and two enzymes modification (α-amylase/pullulanase) falls under the former classification and the latter classification is the combination of two of each of the differently stated modifications, e.g., acetylation/annealing, extrusion/succinylation, and microwave-assisted phosphorylation, etc. The classification, synthesis, properties and applications of dually modified starches were discussed. There is an attempt to elucidate the problems of each of the single modification in order to justify dual modifications. In dual modifications, the order of reactions, the reaction conditions, the medium of reaction, and the botanical sources of the various starches are very important parameters.

Effect of dual modification on properties of biodegradable crosslinked-oxidized starch and oxidized-crosslinked starch films

Due to poor properties of biodegradable native starch (NS) film; in this work, dual-modified starch films i.e. crosslinked-oxidized starch (C-OS) and oxidized-crosslinked starch (O-CS) films were prepared and compared to single-modified starch i.e. crosslinked starch (CS) and oxidized starch (OS) films. All modified starch films were oxidized and crosslinked using hydrogen peroxide and boric acid by casting technique. Degree of crystallinity and swelling behavior of both dual-modified starch films were found to decrease. Moreover, O-CS film showed smoother fractured morphology than C-OS and NS films. Both C-OS and O-CS films presented not only high stress at maximum load and Young's modulus but also high strain at maximum load, as compared to single-modified film. Furthermore, water vapor permeability, thermal property and biodegradability of all modified films were also studied.