Effect of chia mucilage addition on oxidation and release kinetics of lemon essential oil microencapsulated using mesquite gum – Chia mucilage mixtures

Microwave-assisted extraction of mucilage from juá: Characterization and antioxidant activity

Microwave-assisted extraction of mucilage from juá was investigated using response surface methodology. The optimal conditions for extraction were a power of 300 W, an extraction time of 240 s, a pH of 8.0, and a water/sample ratio of 1/6, which achieved a 26.43% yield. The monosaccharide composition and antioxidant activity of the mucilage from juá fruits from different regions of Caatinga were investigated. The fruits from Agreste Paraibano showed the highest mucilage extraction yield (18.64%) compared to that of fruits from Mata Paraibana (MP) (12.37%), Borborema (BB) (11.47%), and Sertão Paraibano (8.31%) (p < 0.05). Glucose (32.8%-50.8%) and arabinose (19.3%-32.9%) were the main monosaccharides found in juá mucilage. The mucilage from fruits in the MP presented the highest antioxidant activity in the 2,2-diphenyl-1-picrylhydrazyl and oxygen radical absorbance capacity assays. Our results demonstrated the potential for the future exploration and application of juá mucilage in the food industry. PRACTICAL APPLICATION: Juá (Ziziphus joazeiro Mart.) mucilage contains phenolic compounds and antioxidant activity, and its extraction by MAE is efficient, as it contributed to a higher yield.

Fabrication of double nano-emulsions loaded with hyssop (Hyssopus officinalis L.) extract stabilized with soy protein isolate alone and combined with chia seed gum in controlling the oxidative stability of canola oil

The aim of this study was to encapsulate hyssop (Hyssopus officinalis L.) extract obtained through ultrasound-assisted cold plasma pretreatment extraction within a double emulsion stabilized by soy protein isolate alone (SPI) and combined with chia seed gum (CSG) in the external aqueous phase on the stabilization of canola oil. FTIR analysis verified that there were electrostatic interactions between CSG and SPI. The SPI/CSG-stabilized emulsion demonstrated lower viscosity, smaller droplets, higher ζ-potential, and encapsulation efficiency compared to the SPI-stabilized emulsion. Non-Newtonian, pseudoplastic behaviors were shown by emulsions. Also, according to the dynamic rheological parameters (G' and G''), the SPI/CSG-stabilized emulsion had elastic behavior with weak gel properties. The antioxidant activity of the encapsulated extract at 1500 ppm during the storage in canola oil was investigated and compared to unencapsulated extract and TBHQ. The results showed that oil containing encapsulated extract had lower oxidative alterations than the unencapsulated form.

Microencapsulation of Betaxanthin Pigments from Pitahaya (Hylocereus megalanthus) By-Products: Characterization, Food Application, Stability, and In Vitro Gastrointestinal Digestion

The yellow pitahaya peels generated as by-products during the consumption and processing of the fresh fruit are a rich and underutilized source of betaxanthins (natural yellow-orange pigment with antioxidant activity) and mucilage (structuring material used in the spray-drying process), molecules of high interest for the food industry. In this work, the betaxanthin-rich extract (BRE) obtained from this by-product was microencapsulated by spray drying (SD) using pitahaya peel mucilage (MPP) and maltodextrin (MD) as wall materials. Both types of microencapsulates (i.e., SD-MPP and SD-MD) retained high betaxanthin content (as measured by UV-vis) and antioxidant activity (ORAC). These microencapsulates were characterized structurally (FTIR and zeta potential), morphologically (SEM and particle size/polydispersity index), and thermally (DSC/TGA). The powdered microencapsulates were incorporated into the formulation of candy gummies as a food model, which were subjected to an in vitro gastrointestinal digestion process. The characterization study (FTIR and antioxidant activity) of the microcapsules showed that the fruit peel mucilage favors the retention of betaxanthins, while the SEM analysis revealed a particle size of multimodal distribution and heterogeneous morphology. The addition of SD-MPP microcapsules in the candy gummy formulation favored the total dietary fiber content as well as the gumminess and chewiness of the food matrix; however, the inhibition of AAPH^• (%) was affected. The stability of the yellow color in the gummies after 30 days of storage indicates its suitability for storage. Consequently, the microencapsulation of betaxanthins with pitahaya peel mucilage can be used as a food additive colorant in the food industry, replacing synthetic colorants, to develop products with beneficial qualities for health that can satisfy the growing demand of consumers.

Characterization, Thermal Stability and Antimicrobial Evaluation of the Inclusion Complex of Litsea cubeba Essential Oil in Large-Ring Cyclodextrins (CD9-CD22)

Food safety issues are becoming increasingly important as a result of contamination with foodborne pathogenic bacteria. Plant essential oil is a safe and non-toxic natural antibacterial agent that can be used to develop antimicrobial active packaging materials. However, most essential oils are volatile and require protection. In the present study, LCEO and LRCD were microencapsulated through coprecipitation. The complex was investigated using GC-MS, TGA, and FT-IR spectroscopy. According to the experimental results, it was found that LCEO entered the inner cavity of the LRCD molecule and formed a complex with LRCD. LCEO had a significant and broad-spectrum antimicrobial effect against all five microorganisms tested. At 50 °C, the microbial diameter of the essential oil and its microcapsules showed the least change, indicating that this essential oil has high antimicrobial activity. In research on microcapsule release, LRCD has proven to be a perfect wall material for controlling the delayed release of essential oil and extending the duration of antimicrobial activity. LRCD effectively extends antimicrobial duration by encasing LCEO, thus improving its heat stability and antimicrobial activity. The results presented here indicate that LCEO/LRCD microcapsules can be further utilized in the food packaging industry.

Chia Oil and Mucilage Nanoemulsion: Potential Strategy to Protect a Functional Ingredient

Nanoencapsulation can increase the stability of bioactive compounds, ensuring protection against physical, chemical, or biological degradations, and allows to control of the release of these biocompounds. Chia oil is rich in polyunsaturated fatty acids-8% corresponds to omega 3 and 19% to omega 6-resulting in high susceptibility to oxidation. Encapsulation techniques allow the addition of chia oil to food to maintain its functionality. In this sense, one strategy is to use the nanoemulsion technique to protect chia oil from degradation. Therefore, this review aims to present the state-of-the-art use of nanoemulsion as a new encapsulation approach to chia oil. Furthermore, the chia mucilage-another chia seed product-is an excellent material for encapsulation due to its good emulsification properties (capacity and stability), solubility, and water and oil retention capacities. Currently, most studies of chia oil focus on microencapsulation, with few studies involving nanoencapsulation. Chia oil nanoemulsion using chia mucilage presents itself as a strategy for adding chia oil to foods, guaranteeing the functionality and oxidative stability of this oil.

Seed mucilage-based advanced carrier systems for food and nutraceuticals: fabrication, formulation efficiency, recent advancement, challenges, and perspectives

Seed mucilages are potential sources of natural polysaccharides. They are biodegradable, biocompatible, sustainable, renewable, and safe for human consumption. Due to the desirable physicochemical and functional properties (e.g. gelling, thickening, stabilizing, and emulsifying), seed mucilages have attracted extensive attention from researchers for utilization as a promising material for the development of advanced carrier systems. Seed mucilages have been utilized as natural polymers to improve the properties of various carrier systems (e.g. complex coacervates, beads, nanofibers, and gels) and for the delivery of diverse hydrophilic and lipophilic compounds (e.g. vitamins, essential oils, antioxidants, probiotics, and antimicrobial agents) to achieve enhanced stability, bioavailability, bioactivity of the encapsulated molecules, and improved quality attributes of food products. This review highlights the recent progress in seed mucilage-based carrier systems for food and nutraceutical applications. The main contents include (1) sources, extraction methods, and physicochemical and functional characteristics of seed mucilages, (2) application of seed mucilages for the development of advanced carrier systems, (3) major issues associated with carrier fabrication, and (4) mechanisms of carrier development, latest improvements in carrier formulation, carrier efficiency in the delivery of bioactive agents, and application in food and nutraceuticals. Furthermore, major challenges and future perspectives of seed mucilage-based carriers for a commercial application are discussed.

Influence of Dehydration Temperature on Obtaining Chia and Okra Powder Mucilage

Gum and mucilage from seeds and fruits are objects of study because they have characteristics of high viscosity at low concentrations and gelling properties, which are useful characteristics for modifying the texture and stabilizing products in the food industry. Chia and okra have high concentrations of polysaccharide gums in their composition, which makes them an interesting target for use in the composition of foods that require the use of texture enhancers and stabilizers. The present study investigated the influence of dehydration temperature on the characteristics of chia and okra powder mucilage obtained at different temperatures. The mucilages were extracted using an aqueous process and dehydrated in an air circulation oven at 50, 60, and 70 °C until hydroscopic equilibrium. Then, the powdered chia mucilage (CM) and okra mucilage (OM) were analyzed for chemical and physicochemical characteristics, bioactive compounds, antioxidant activity, and physical properties. It was found that powdered mucilage had low water content and water activity, with CM standing out in terms of ash, pectin, and starch content and OM, along with higher averages of proteins, sugars, total phenolic compounds, anthocyanins, flavonoids, and antioxidant activity. As for the physical parameters, CM stood out in relation to greater solubility and lower hygroscopicity, whereas OM presented higher wettability rates. Both powdered mucilages were classified as having good fluidity and cohesiveness from low to intermediate. In relation to the dehydration temperature, the best mucilage properties were verified at 70 °C. The study revealed that mucilages have good functional properties offering great potential as raw material for industry.

Seed gum-based delivery systems and their application in encapsulation of bioactive molecules

Now-a-days, the food/pharma realm faces with great challenges for the application of bioactive molecules when applying them in free form due to their instability in vitro/in vivo. For promoting the biological and functional properties of bioactive molecules, efficient delivery systems have played a pivotal role offering a controlled delivery and improved bioavailability/solubility of bioactives. Among different carbohydrate-based delivery systems, seed gum-based vehicles (SGVs) have shown great promise, facilitating the delivery of a high concentration of bioactive at the site of action, a controlled payload release, and less bioactive loss. SGVs are potent structures to promote the bioavailability, beneficial properties, and in vitro/in vivo stability of bioactive components. Here, we offer a comprehensive overview of seed gum-based nano- and microdevices as delivery systems for bioactive molecules. We have a focus on structural/functional attributes and health-promoting benefits of seed gums, but also strategies involving modification of these biopolymers are included. Diverse SGVs (nano/microparticles, functional films, hydrogels/nanogels, particles for Pickering nanoemulsions, multilayer carriers, emulsions, and complexes/conjugates) are reviewed and important parameters for bioactive delivery are highlighted (e.g. bioactive-loading capacity, control of bioactive release, (bio)stability, and so on). Future challenges for these biopolymer-based carriers have also been discussed. HighlightsSeed gum-based polymers are promising materials to design different bioactive delivery systems.Seed gum-based delivery systems are particles, fibers, complexes, conjugates, hydrogels, etc.Seed gum-based vehicles are potent structures to promote the bioavailability, beneficial properties, and in vitro/in vivo stability of bioactive components.

Spray-Drying Microencapsulation of Pink Guava (Psidium guajava) Carotenoids Using Mucilage from Opuntia ficus-indica Cladodes and Aloe Vera Leaves as Encapsulating Materials

In this work, the capacity of the mucilage extracted from the cladodes of Opuntia ficus-indica (OFI) and aloe vera (AV) leaves as wall material in the microencapsulation of pink guava carotenoids using spray-drying was studied. The stability of the encapsulated carotenoids was quantified using UV-vis and HPLC/MS techniques. Likewise, the antioxidant activity (TEAC), color (CIELab), structural (FTIR) and microstructural (SEM and particle size) properties, as well as the total dietary content, of both types of mucilage microcapsules were determined. Our results show that the use of AV mucilage, compared to OFI mucilage, increased both the retention of β-carotene and the antioxidant capacity of the carotenoid microcapsules by around 14%, as well as the total carotenoid content (TCC) by around 26%, and also favors the formation of spherical-type particles (Ø ≅ 26 µm) without the apparent damage of a more uniform size and with an attractive red-yellow hue. This type of microcapsules is proposed as a convenient alternative means to incorporate guava carotenoids, a natural colorant with a high antioxidant capacity, and dietary fiber content in the manufacture of functional products, which is a topic of interest for the food, pharmaceutical, and cosmetic industries.

Mucilages: sources, extraction methods, and characteristics for their use as encapsulation agents

The increasing interest in the use of natural ingredients has driven keen research and commercial interest in the use of mucilages for a range of applications. Typically, mucilages are polysaccharide hydrocolloids with distinct physicochemical and structural diversity, possessing characteristic functional and health benefits. Apart from their role as binding, thickening, stabilizing, and humidifying agents, they are valued for their antimicrobial, antihypertensive, antioxidant, antiasthmatic, hypoglycemic, and hypolipidemic activities. The focus of this review is to present the range of mucilages that have been explored as encapsulating agents. Encapsulation of food ingredients, nutraceutical, and pharmaceutical ingredients is an attractive technique to enhance the stability of targeted compounds, apart from providing benefits on delivery characteristics. The most widely adopted conventional and emerging extraction and purification methods are explained and supplemented with information on the key criteria involved in characterizing the physicochemical and functional properties of mucilages. The unique traits and benefits of using mucilages as encapsulation agents are detailed with the different methods used by researchers to encapsulate different food and bioactive compounds.

Encapsulation Effect on the In Vitro Bioaccessibility of Sacha Inchi Oil (Plukenetia volubilis L.) by Soft Capsules Composed of Gelatin and Cactus Mucilage Biopolymers

Sacha inchi (Plukenetia volubilis L.) seed oil is a rich source of polyunsaturated fatty acids (PUFAs) that are beneficial for human health, whose nutritional efficacy is limited because of its low water solubility and labile bioaccessibility (compositional integrity). In this work, the encapsulation effect, using blended softgels of gelatin (G) and cactus mucilage (CM) biopolymers, on the PUFAs’ bioaccessibility of P. volubilis seed oil was evaluated during in vitro simulated digestive processes (mouth, gastric, and intestinal). Gas chromatography–mass spectrometry (GC–MS) and gas chromatography with a flame ionization detector (GC–FID) were used for determining the chemical composition of P. volubilis seed oil both before and after in vitro digestion. The most abundant compounds in the undigested samples were α-linolenic, linoleic, and oleic acids with 59.23, 33.46, and 0.57 (g/100 g), respectively. The bioaccessibility of α-linolenic, linoleic, and oleic acid was found to be 1.70%, 1.46%, and 35.8%, respectively, along with the presence of some oxidation products. G/CM soft capsules are capable of limiting the in vitro bioaccessibility of PUFAs because of the low mucilage ratio in their matrix, which influences the enzymatic hydrolysis of gelatin, thus increasing the release of the polyunsaturated content during the simulated digestion.

Pectin-Based Films Loaded with Hydroponic Nopal Mucilages: Development and Physicochemical Characterization

Nopal is a potential source of mucilage that can be used in different food applications. One of its potential use is the development of films and coatings where it can act as a packaging material but also as a source of bioactive compounds. Therefore, this work aimed to develop and characterize pectin-based films loaded with mucilage extracted from two species of nopal, Copena F1 (Cop) and Villanueva (Vi). The obtained mucilages were denominated as materials without fibre (Copwtf and Viwtf) and with fibre (Copwf and Viwf), according to the fibre’s size. Films were produced with pectin (2% w/v), mucilage (2.5% w/v) and glycerol (0.5% w/v) by the casting method. The addition of mucilages was shown to influence the visual appearance, optical properties and morphology of the films. The presence of mucilage also changed the moisture content, water contact angle and water vapour permeability of the films. The pectin-based films without mucilage presented the best mechanical properties. Fourier-transform infrared (FTIR) spectroscopy showed similar signals in terms of frequency and intensity, for all the films, not showing any chemical modification. Results show that the mucilage obtained from different nopal fractions can be used in pectin-based films foreseeing their use as films or coatings in food applications.

Glyceridic and Unsaponifiable Components of Microencapsulated Sacha Inchi (Plukenetia huayllabambana L. and Plukenetia volubilis L.) Edible Oils

Sacha inchi (Plukenetia huayllabambana L. and Plukenetia volubilis L.) edible oils were microencapsulated and the lipid fraction of the microparticles was characterized. Hi-cap^®, Capsule^®, Arabic gum, and the binary combination of Arabic gum + maltodextrin and the ternary combination of Arabic gum + maltodextrin + whey protein isolate, were used as coating materials for the encapsulation process using spray-drying. The surface and the total oils obtained from the microparticles were evaluated in terms of fatty acid composition, minor glyceride polar compounds, polymers, oxidized triglycerides, diglycerides, monoglycerides, and free fatty acids, along with their unsaponifiable components, sterols, and tocopherols. Differences between the original oils and the microencapsulated ones were determined. The most remarkable results included the presence of polymers when there were none in the original oils, the slight loss in ω3-fatty acids, up to 6%, the loss in tocopherols, in some of the cases around 30%, the maintaining of the phytosterol in their initial levels and the presence of cholesterol in the oils encapsulated with whey protein isolate.

Relation between the particle size and release characteristics of aromatic melamine microcapsules in functional textile applications

The relation between the particle size and release characteristics of aromatic microcapsules with a melamine resin shell in functional textile applications have been investigated. Firstly, the microcapsules are characterized based on their Fourier transform infrared spectra, encapsulation efficiencies, particle size distributions, optical images, and scanning electron microscopy images. The impregnation performances of the microcapsules have been initially evaluated using image analysis. Subsequently, the impregnation efficiency and broken release characteristics are semi-quantitatively analyzed using solid-phase microextraction-gas chromatography-mass spectrometry. The analysis results show that the highest impregnation efficiency and broken release intensity could be observed when the microcapsule size was similar to the fiber diameter (25–30 μm). Eventually, the sustained release of the microcapsules over a period of 2400 h was evaluated using the weighing calculation method, and the trends were studied using the Peppas model. It was found that the microcapsule release rate slowly and continuously decreased with time, and the release rates significantly increased with the decrease in microcapsule particle size. Thus, it could be concluded that the large microcapsules exhibited better leak tightness than the small microcapsules, whereas the small microcapsules exhibited faster sustained release rates.

The relation between the particle size and release characteristics of aromatic microcapsules with a melamine resin shell in functional textile applications have been investigated.

Microcapsules based on octenyl succinic anhydride (OSA)-modified starch and maltodextrins changing the composition and release property of rose essential oil

Octenyl succinic anhydride (OSA)-modified starch and maltodextrins (MDs) are important carbohydrate polymers as wall materials. However, few studies have shown whether these two wall materials affect the composition of core materials. In this work, we investigated the effects of OSA-modified starch and MD on the release property of essential oils. Results showed that among the seven characteristic aroma components (CACs) of rose essential oil (REO), the esters released the fastest, followed by the alcohols, while the release of the phenols was the slowest. Environmental factors such as temperature and relative humidities (RHs) had significant influences on the release kinetics of CACs in REO. This work provides new insights into the use of OSA-modified starch and MDs as wall materials for encapsulating complex and bioactive components.