Thermal and non-thermal processing effect on açai juice composition

Effects of different sterilisation methods on the quality and flavor of non from concentrate (NFC) Actinidia arguta juice

Sterilisation is one of the most important means to extend the shelf life of fruit juices. In this paper, the effects of four sterilisation methods, ultraviolet (UV), ultrasonic (US), ultrahigh pressure (UHP) and low temperature long time (LTLT), on Actinidia arguta juice were investigated. The results showed that all four methods were able to reduce the microbial population below the safety limit, had no significant effect on pH, but increased the total soluble solids content and reduced the total acid content. UV, US and UHP were more effective in retaining nutrients, while LTLT significantly reduced chlorophyll, total sugars, total flavonoids, total phenols and ascorbic acid content (p < 0.05). UHP improved the colour better, while UV better preserved the original flavor. This study will provide an alternative strategy for thermal pasteurization of traditional NFC fruit juices.

Enhancing bioactive compounds in plant-based foods: Influencing factors and technological advances

Plant-based foods are natural sources of phytochemicals, which exhibit free radical scavenging capacity. However, the bioaccessibility of phytochemicals in foods are limited due to their poor stability and solubility within food matrix. Moreover, chemical degradation induced by processing further diminish the levels of these bioactive compounds. This review explores the impacts of thermal and non-thermal processing on fruits and vegetables, emphasizing the application of emerging technologies to enhance food quality. Innovative non-thermal technologies, which align with sustainable and environmentally friendly principles of green development, are particularly promising. Supercritical CO2 and cold plasma can be applied in extraction of phytochemicals, and these extracts also can be used as natural preservatives in food products, as well as improve the texture and sensory properties of food products, offering significant potential to advance the field of food science and technology while adhering to eco-friendly practices.

Room temperature storage of myrtle (Eugenia gracillima Kiaersk.) tropical juice: Effects of physical and chemical preservation methods

Tropical fruit juices produced from native fruits have been widely marketed by small agribusinesses in the Brazilian semiarid region, necessitating a deeper understanding of the impact of preservation methods on quality parameters. This study aimed to prepare myrtle (Eugenia gracillima Kiaersk.) tropical juice and investigate the effects of physical preservation (90 °C for 60 s) and chemical preservation (potassium sorbate and sodium benzoate) methods. Tropical juice formulations were evaluated after preparation and every 15 days during 60 days of storage in high-density polyethylene bottles at room temperature (25 ± 2 °C). Microbiological parameters, optical microscopy, physicochemical and bioactive parameters, antioxidant capacity, and color parameters were determined. Heat-treated tropical juice showed low counts of all microbiological parameters, but optical microscopy revealed the presence of filamentous fungi after 60 days of storage. Combined use of potassium sorbate and sodium benzoate effectively prevented the development of total yeasts and molds up to 28 days of storage. Bioactive compounds in myrtle pulp contribute to storage stability, mainly total phenolics, estimated at 855.86 mg gallic acid equivalents 100 g-1. The results suggest that it is possible to harness the economic and agroindustrial potential of E. gracillima Kiaersk. fruits for the production of tropical juices, but it is recommended that other technologies be explored, such as aseptic processing or the combined use of physical and chemical methods.

Anti-Platelet Activity of Sea Buckthorn Seeds and Its Relationship with Thermal Processing

Sea buckthorn (Hippophae rhamnoides L.) is a tree or shrub with small, orange berries. Sea buckthorn seeds have shown many properties beneficial to human health, including antioxidant, anti-hypertensive, anti-hyperlipidemic, and retinoprotective activities. Seeds, as a component of food, are often exposed to high temperatures, which can increase or decrease their biological activity. In our previous study, we showed that both raw and roasted sea buckthorn seeds had significant antioxidant activity, which was measured in human plasma in vitro. In this paper, we evaluated the effect of extracts from raw and roasted sea buckthorn seeds on several parameters of hemostasis in vitro, including thrombus formation in full blood (measured by the Total Thrombus formation Analysis System-T-TAS), blood platelet activation (based on the exposition of P-selectin, the active form of GPIIb/IIIa on their surface and platelet-derived microparticles formation), aggregation (measured with impedance aggregometry), adhesion to fibrinogen and collagen, arachidonic acid metabolism in washed platelets stimulated by thrombin, and COX-1 activity. We also measured the levels of free 8-isoprostane in plasma and the total non-enzymatic antioxidant status of plasma. The extract from roasted seeds (50 µg/mL) significantly prolonged the time of occlusion measured by T-TAS-the AUC10 (area under the curve) value was decreased by approximately 18%. Both extracts decreased the exposition of the active form of GPIIb/IIIa on the surface of platelets activated with 10 μM ADP (by 38.4-62.2%) and 20 μM ADP (by 39.7-51.3%). Moreover, the extract from raw seeds decreased the exposition of P-selectin on the surface of platelets stimulated with 20 μM ADP (by 31.2-34.9%). The adhesion of thrombin-stimulated platelets to fibrinogen and collagen was inhibited only by the extract from roasted sea buckthorn seeds (by 20-30%). Moreover, the extract from raw seeds inhibited the level of TBARS (thiobarbituric acid-reactive substances, an indicator of enzymatic peroxidation of arachidonic acid) in washed platelets stimulated with thrombin; the activity of COX-1 was inhibited by both extracts, although the effect of the extract from raw seeds was stronger. These results indicate that sea buckthorn seeds have anti-platelet activity that is not decreased by thermal processing, but more research is needed to determine which exact chemical compounds and mechanisms are responsible for this phenomenon.

Effects of the spray-drying process using maltodextrin on bioactive compounds and antioxidant activity of the pulp of the tropical fruit açai (Euterpe oleracea Mart.)

Aҫai fruit is characterized by the properties of its bioactive compounds; however, this fruit is highly perishable and its compounds are sensitive when exposed to non-optimal environmental factors. Therefore, the objective of this study was to encapsulate the fruit pulp by spray drying to improve the nutritional value and extend the shelf life of the products derived from acai fruit. Maltodextrin was used as a wall material and the process was optimized to obtain the desirable values of the response variables. For this, a central compound design (CCD) was developed to determine the influence of temperature (110-170 °C) and the wall material proportion (5-15 %) on dependent variables: the retention of ascorbic acid, moisture percentage, hygroscopicity, solubility, water activity, and yield. Furthermore, the effects of spray drying on bioactive compounds (AA, TPC, TFC, TA, TCC, GA, CT, and QC) and antioxidant activity (ABTS, DPPH, and ORAC) were evaluated. The maximum design temperature (170 °C) and wall material proportion (15 %) significantly influenced the response variables where encapsulation was applied, with high ascorbic acid retention (96.886 %), low moisture (0.303 %), low hygroscopicity (7.279 g/100 g), low level of water activity (0.255), a water solubility index of 23.206 %, and a high yield of 70.285 %. The bioactive compounds analyzed and the antioxidant capacity presented significant retention values for AA (96.86 %), TPC (65.13 %), TFC (82.09 %), TA (62.46 %), TCC (7.28 %), GA (35.02 %), CT (49.03 %), QC (37.57 %), ABTS (81.24 %), DPPH (75.11 %), and ORAC (15.68 %). Therefore, it is concluded that the powder obtained under these conditions has desirable physical properties, and the drying process preserved a notable retention of bioactive compounds and their antioxidant activities.

Effects of Pulsed Electric Field and High-Pressure Processing Treatments on the Juice Yield and Quality of Sea Buckthorn

Sea buckthorn juice has high nutritional value and a rich flavor that consumers enjoy. Traditional sea buckthorn thermal processing (TP) technology has problems such as low juice yield, poor quality, and poor flavor. Sea buckthorn berries are processed using a technique combining pulsed electric field (PEF) and high-pressure processing (HPP) to increase juice yield and study its impact on the quality and volatile aroma of sea buckthorn juice. Results have show that, compared with TP, under the condition of PEF-HPP, the juice yield of sea buckthorn significantly increased by 11.37% (p > 0.05); TP and PEF-HPP treatments could effectively kill microorganisms in sea buckthorn juice, but the quality of sea buckthorn juice decreased significantly after TP treatment (p > 0.05), whereas PEF-HPP coupling technology could maximally retain the nutrients of sea buckthorn juice while inhibiting enzymatic browning to improve color, viscosity, and particle size. The flavor of sea buckthorn juice is analyzed using electronic nose (E-nose) and gas chromatography-ion mobility spectrometer (GC-IMS) techniques, and it has been shown that PEF-HPP retains more characteristic volatile organic compounds (VOCs) of sea buckthorn while avoiding the acrid and pungent flavors produced by TP, such as benzaldehyde, (E)-2-heptenal, and pentanoic acid, among others, which improves the sensory quality of sea buckthorn juice. PEF-HPP technology is environmentally friendly and efficient, with significant economic benefits. Research data provide information and a theoretical basis for the sea buckthorn juice processing industry.

Continuous-Flow High-Pressure Homogenization of Blueberry Juice Enhances Anthocyanin and Ascorbic Acid Stability during Cold Storage

Blueberries (Vaccinium section Cyanococcus) have a wealth of bioactive compounds, including anthocyanins and other antioxidants, that offer significant health benefits. Preserving these compounds and maintaining the sensory and nutritional qualities of blueberry products such as juice during cold market storage is critical to meet consumer expectations for nutritious, safe, and minimally processed food. In this study, we compared the effects of two preservation processing techniques, high-temperature short-time (HTST) and continuous flow high-pressure homogenization (CFHPH), on blueberry juice quality during storage at 4 °C. Our findings revealed that inlet temperature (Tin) of CFHPH processing at 4 °C favored anthocyanin retention, whereas Tin at 22 °C favored ascorbic acid retention. After 45 days of storage, CFHPH (300 MPa, 1.5 L/min, 4 °C) juice retained up to 54% more anthocyanins compared to control at 0 day. In contrast, HTST treatment (95 °C, 15 s) initially increased anthocyanin concentrations but led to their subsequent degradation over time, while also significantly degrading ascorbic acid. Furthermore, CFHPH (300 MPa, 4 °C) juice had significantly lower polyphenol oxidase activity (>80% less than control), contributing to the overall quality of the juice. This innovative processing technique has the potential to improve commercial blueberry juice, and help meet the rising demand for healthy and appealing food choices.

Effects of ultra-high pressure, thermal pasteurization, and ultra-high temperature sterilization on color and nutritional components of freshly-squeezed lettuce juice

The aim of this study was to evaluate the effects of ultra-high pressure (UHP, 600 MPa/2 min), thermal pasteurization (TP, 95 °C/1 min) and ultra-high temperature (UHT, 115 °C/5 s) sterilization on the color, sensory evaluation, microorganisms, physicochemical characteristics and nutritional components of freshly-squeezed lettuce juice (FLJ). Results showed that three sterilization methods demonstrated desirable inactivation effects on total aerobic bacteria, yeast and mold, and there were no significant changes in the main nutritional components, including ash, protein, carbohydrate and total dietary fiber. However, UHT and TP significantly affected the color of FLJ from bright green to light brown and made chlorophyll, β-carotene and vitamins (VE, VC, VK1, VB6, VB12, and folic acid) contents markedly decreased. By contrast, UHP maintained the original color, fresh-like sensory qualities, vitamins, and carotene of FLJ to the greatest extent. Our results provide a promising application of UHP in the large-scale processing of FLJ.

Non-thermal treatments of strawberry pulp: The relationship between quality attributes and microstructure

The relationship between quality attributes and microstructure in strawberry pulp after pasteurization (PS), ultrasound (US), electron beam irradiation (EB), and high pressure (HP) treatments was investigated. The results showed that US treatment decreased the viscosity to the lowest by 80.15% and increased the a* value, cloudy stability, and contents of titratable acid, total soluble solid, organic acids, total phenols, total flavonoids, and total anthocyanins (TAC), as well as its antioxidant capacity, due to the decrease in particle size, the destruction of microstructure, and the release of intracellular compounds. US and EB treatments could maintain the volatile compounds. The greatest deterioration in TAC and volatile compound content was found in the pulp treated with PS and HP treatments. HP treatment was beneficial to the enhancement of apparent viscosity, organic acids, and soluble sugar. These results provided insights into the enhancement of quality attributes in strawberry pulp due to the microstructure change.

Effect of High-Pressure and Thermal Pasteurization on Microbial and Physico-Chemical Properties of Opuntia ficus-indica Juices

Opuntia fruits are recognized for their richness in nutrients and in bioactive compounds, being also highly appreciated by consumers as a juice. Nevertheless, without further processing, prickly pear juices have a short shelf-life, hampering their commercial use. In this work, thermal (TP) and high-pressure (HPP) pasteurization were applied to juices from Opuntia ficus-indica cultivars ‘Rossa’, ‘Gialla’, and ‘Bianca’ to understand the impact of those methods on the microbial safety, physico-chemical properties, and the nutritional content of the samples, over storage at 4 °C. In general, thermal pasteurization at 71.1 °C for 30 s increased the shelf-life by 22 days, and high-pressure pasteurization at 500 MPa for 10 min increased the shelf-life by 52 days with regard to microbial growth as well as maintenance of physical-chemical characteristics. The application of these two pasteurization methods delayed changes in the physico-chemical characteristics of the juices, with a more pronounced effect on the titratable acidity, °Brix and browning. For the same periods of time, the application of pasteurization methods decreased the variation in these quality parameters by around 75%. Similarly, these methods were shown to have the same effect on the polyphenolic concentration as well as the antioxidant activity of the juices. In particular, HPP was more efficient in preventing a decrease in °Brix and increase in titratable acidity, which normally negatively affect the flavor of the juices.

Protective Effect of Ultrasound-Processed Amazonian Sapota-do-Solimões (Quararibea cordata) Juice on Artemia salina Nauplii

Juice processing by non-thermal technology has been extensively studied, aiming at microbial inactivation and quality improvement. However, the knowledge about the possible toxic effects that those technologies can produce in foodstuffs due to the production of reactive oxygen species is still unknown. In this study, sapota-do-Solimões juice processed by ultrasound (2, 6, and 10 min) was evaluated by a toxicity test and protective effect through stress biomarkers (catalase, superoxide dismutase, and lipid peroxidation) using Artemia salina nauplii. The non-thermal processed juice was nontoxic to A. salina. However, the juice fibers imparted some damage to the animal’s body. The ultrasound-processed juice (2 and 6 min) decreased the A. salina mortality to 30% compared to the control assay with H2O2 where mortality was 80% after 48 h of exposure. However, after 72 h of exposure, the A. salina was entirely degraded by H2O2-induced toxicity. Furthermore, the catalase and superoxide dismutase presented the highest activity after A. salina was exposed to the unprocessed juice. Thus, sapota-do-Solimões juice processed by the ultrasound could promote a protective effect on A. salina, revealing this technology’s potential to enhance juice features without toxicity.

Athermal Concentration of Blueberry Juice by Forward Osmosis: Food Additives as Draw Solution

This study is to evaluate the athermal forward osmosis (FO) concentration process of blueberry juice using food additives as a draw solution (DS). The effects of food additives, including citric acid, sodium benzoate, and potassium sorbate, on the concentration processes are studied, and their effects on the products and membranes are compared. Results show that all these three food additives can be alternative DSs in concentration, among which citric acid shows the best performance. The total anthocyanin content (TAC) of blueberry juice concentrated by citric acid, sodium benzoate, and potassium sorbate were 752.56 ± 29.04, 716.10 ± 30.80, and 735.31 ± 24.92 mg·L^-1, respectively, increased by 25.5%, 17.8%, and 19.9%. Meanwhile, the total phenolic content (TPC) increased by 21.0%, 10.6%, and 16.6%, respectively. Citric acid, sodium benzoate, and potassium sorbate all might reverse into the concentrated juice in amounts of 3.083 ± 0.477, 1.497 ± 0.008, and 0.869 ± 0.003 g/kg, respectively. These reversed food additives can make the TPC and TAC in juice steadier during its concentration and storage. Accordingly, food additives can be an excellent choice for DSs in the FO concentration process of juices, not only improving the concentration efficiency but also increasing the stability of blueberry juice.

A Comparative Study of Yeasts for Rosa roxburghii Wine Fermentation

Wine produced by fermentation of Chestnut rose (Rosa roxburghii) hips, known as cili (Chinese-Mandarin), in Guizhou province, and other places in China is becoming popular but there is limited knowledge of suitable yeast strains for its production. In this study, we first investigated the oenological properties of six commercial S. cerevisiae yeast strains (X16, F33, SH12, GV107, S102, RMS2), one commercial Saccharomyces cerevisiae var. bayanus (S103), one commercial, non-Saccharomyces yeast strain, Torulaspora delbrueckii Prelude, and one indigenous S. cerevisiae strain, CZ, for cili wine fermentation. We measured the key traits of each of the yeast strains, viz., sulfite resistance, flocculation, hydrogen sulfide production capacity, fermentation rate, and yeast growth curves. Subsequently, we measured the resultant wine characteristics, viz., pH, alcohol content, residual sugar, titratable acidity, volatile acidity, ascorbic acid content and headspace volatile compounds. The overall suitability of each yeast type was evaluated using a multi-factor, unweighted, scorecard. On that basis, RMS2 was the most suitable, and closely followed by CZ and X16. This study is the first comparative evaluation of yeasts for cili wine production and provides a preliminary guide for their selection.

Chemical and Sensory Characteristics of Fruit Juice and Fruit Fermented Beverages and Their Consumer Acceptance

Recent social, economic, and technological evolutions have impacted consumption habits. The new consumer is more rational, more connected and demanding with products, more concerned with the management of the family budget, with the health, origin, and sustainability of food. The food industry over the last few years has shown remarkable technological and scientific evolution, with an impact on the development and innovation of new products using non-thermal processing. Non-thermal processing technologies involve methods by which fruit juices receive microbiological inactivation and enzymatic denaturation with or without the direct application of low heat, thereby lessening the adverse effects on the nutritional, bioactive, and flavor compounds of the treated fruit juices, extending their shelf-life. The recognition of the nutritional and protective values of fruit juices and fermented fruit beverages is evident and is attributed to the presence of different bioactive compounds, protecting against chronic and metabolic diseases. Fermentation maintains the fruit's safety, nutrition, and shelf life and the development of new products. This review aims to summarize the chemical and sensory characteristics of fruit juices and fermented fruit drinks, the fermentation process, its benefits, and its effects.

Effects of ultrasonic treatment on color, carotenoid content, enzyme activity, rheological properties, and microstructure of pumpkin juice during storage

Freshly squeezed pumpkin juice (Cucurbita moschata D.) was sonicated at various power levels at a constant frequency of 25 kHz and a treatment time of 10 min. Samples were stored in the dark for 0, 4, 8, and 12 days at 4 °C and were subsequently analyzed. The combined effects of power level and storage period on color parameters, carotenoid content, particle size distribution, cloud value, rheological characteristics, and microstructure were investigated. The results showed ultrasonic-treated samples had little effect on carotenoid content, cloud value, particle size distribution, and polydispersity during storage compared to those of the untreated samples. The L^⁎, a^⁎, b^⁎, and C* values decreased significantly during 8-12 days of storage, resulting in a significant increase in ΔE, especially 400 W/10 min-treated samples. Meanwhile, the enzyme activity and rheological properties increased significantly on storage days 8-12. However, the microstructure of all samples did not change significantly during storage. Based on these results, during the storage period, the physical and chemical properties of 400 W/10 min-ultrasonic treated pumpkin juice were retained more than those in the untreated pumpkin juice. Therefore, ultrasonic treatment has broad application prospects in preserving bioactive substances and physicochemical properties and improving the storage life of fresh pumpkin juice.

Ultrasound and Ozone Processing of Cashew Apple Juice: Effects of Single and Combined Processing on the Juice Quality and Microbial Stability

Standalone and sequential ultrasound (US) and ozone (OZ) processes were applied to cashew apple juice. An unsupervised method, by principal component analysis (PCA), was used to understand the effect of the non-thermal treatments on the cashew apple composition. The US processing (373 W/cm2; 10 min; 40 °C) promoted the highest peroxidase inactivation and increased the flavonoid content and antioxidant activity (DPPH ABTS and FRAP methods). The ozone processing (0.24 mg O3/mL) increased total phenolic compounds (TPC). Sequential processing was carried out by applying both of the processes, using the best processing conditions for US and OZ. Sequential processing resulted in the higher retention of yellow flavonoids than in the control and single processing. However, the effect of sequential US and OZ processing can be deleterious to vitamin C and TPC after 30 days of cold storage while maintaining the flavonoids of the cashew apple juice. Furthermore, the synergy between US and OZ reduced native microbiota counts, suggesting a microbiologically safe juice. Further studies on the mechanism of bioactive compound degradation might be helpful for product quality modulation.

Cold Plasma Processing on Fruits and Fruit Juices: A Review on the Effects of Plasma on Nutritional Quality

This review aims to present the effects of cold plasma technology on the nutritional quality of fruits and fruit juices. This review focuses on the chemical changes induced by plasma on several bioactive compounds, such as sugars, starch, lipids, vitamins, phenolic compounds, carotenoids, and anthocyanins. The main plasma-reacting species that reacts with fruit compounds are presented and discussed. The review presents the mechanisms that lead to the improvement and degradation of the main compounds, showing both the advantages and disadvantages of cold plasma technology.

Atmospheric cold plasma frequency imparts changes on cashew apple juice composition and improves vitamin C bioaccessibility

This study evaluated the atmospheric cold plasma (ACP) effect on cashew apple juice composition at different frequencies (200 and 700 Hz). The impact of this non-thermal technology on the organic juice compounds after the processing and along with the in vitro digestion carried out in a simulated digestion system at 37 °C/6 h was evaluated. The changes in the juice composition were determined by NMR spectroscopy and chemometric analyses. Vitamin C and total phenolic compounds were also quantified in processed and non-processed (control) juices and after each digestion phase. The results showed decreased glucose and fructose in samples treated by ACP and an increment in malic acid concentration for ACP700. ACP increased the amount of vitamin C in the juices and did not affect the total phenolic content. The gastric digestion highlighted the pronounced effect of plasma on the juice composition, increasing all of the components detected by NMR. Cashew apple juice processed by ACP700 presented a higher concentration of malic acid and phenylalanine. An increased bioaccessibility of vitamin C was also found for ACP700. Although ACP processing has decreased some compounds' concentration, this technology improved the bioaccessibility of vitamin C - the main bioactive compound of cashew apple juice.

Nopal cladode as a novel reinforcing and antioxidant agent for starch-based films: A comparison with lignin and propolis extract

The potential use of nopal cladode flour (NC) as reinforcing/bioactive agent in cassava starch-based films was evaluated and compared with the use of propolis extract or lignin, which are commonly used for these purposes. Cassava starch-based films containing untreated NC (S-NC), NC treated at pH 12 (S-NC12), aqueous propolis extract at two different concentrations (SP1 or SP2), or lignin (S-L) were produced by the casting technique; glycerol was used as plasticizer. NC12 and NC affected the mechanical properties of the cassava starch-based film similarly as compared to propolis extract and lignin. Moreover, NC and NC12 had different performance as reinforcing and antioxidant agent in cassava starch-based film. Thus, S-NC12 film was more elongable (28.5 ± 6.5%), more hydrophobic (contact angle: 70.8° ± 0.1), less permeable to water vapor (0.8 ± 0.0 × 10^-10 g·m^-1·s^-1·Pa^-1) and had better antioxidant activity by ABTS^•+ (44.70 ± 0.3 μM Trolox·g^-1 of film) than the S-NC film. SEM and TGA analysis of films showed that NC12 was better incorporated into the cassava starch matrix than NC, lignin and propolis extract. Overall, nopal cladode flour has potential use in the production of active biodegradable packaging for the food preservation with high oxidation rate.

Extraction Optimization of Astragaloside IV by Response Surface Methodology and Evaluation of Its Stability during Sterilization and Storage

Radix Astragali is referred to as a variety of food-medicine herb, and it is commonly applied as Traditional Chinese Medicine (TCM). However, it is extremely difficult to extract its bio-active compounds (astragaloside IV) and apply it in food processing efficiently, which restricts its practical applications. In this study, the conditions required for the extraction of astragaloside IV were optimized by following the response surface methodology. More specifically, ammonia with a concentration of 24% was used as an extracting solvent, the solid-liquid ratio was 1:10 (w:v); the Radix Astragali was soaked at 25 °C for 120 min in advance and then stirred at 25 °C for 52 min (150 rpm) to extract astragaloside IV. This method promoted the transformation of other astragalosides into astragaloside IV and replaced the traditional approach for extraction, the solvent reflux extraction method. The yield of astragaloside IV reached the range of 2.621 ± 0.019 mg/g. In addition, the stability of astragaloside IV was evaluated by detecting its retention rate during sterilization and 60-day storage. As suggested by the results, the astragaloside IV in acidic, low-acidic, and neutral solutions was maintained above 90% after sterilization (95 °C and 60 min) but below 60% in an alkaline solution. High temperature and short-term sterilization approach is more appropriate for astragaloside IV in an alkaline solution. It was also found out that the astragaloside IV obtained using our method was maintained over 90% when stored at room temperature (25 °C), and there was no significant difference observed to low temperature (4 °C) in solutions regardless of acidity.