Outstanding antioxidant pickering high internal phase emulsions by co-assembled polyphenol-soy β-conglycinin nanoparticles

High internal phase Pickering emulsions stabilized by tea residue protein: Application in β-carotene encapsulation

The increasing production and consumption of tea drinks has led to the generation of large amounts of discarded extracted tea residues. As a result, researchers have attempted to extract tea water-insoluble protein (TP) from discarded tea residues to produce food emulsifiers. Thus, in this study, high-internal-phase Pickering emulsions (HIPPEs) stabilized by TP were developed and characterized. First, the effects of salt ions on the emulsifying properties of TP were examined using interfacial tension and hydrophobicity. Fourier transform infrared spectroscopy was used to determine the suitable range of salt ions in the processing stage. Then, the particle size distribution, microstructure, rheological properties, and stability of the emulsions were systematically investigated by controlling the oil phase volume, particle concentration of TP, and emulsification method. The results showed that TP was effectively adsorbed on the oil-water interface and formed a stable particle layer, which means that TP-stable high-internal-phase Pickering emulsions (TPHIPPEs) has been successfully prepared. Further analysis showed that TPHIPPEs exhibited good stability and gelation properties. The pH range was 7-9, and the salt ion concentration was <0.5 M. Additionally, TPHIPPEs exhibited excellent temperature tolerance and antioxidant ability. Finally, the application development results revealed that the loading and retention rates of β-carotene in TPHIPPEs were significantly higher than those of the control group of camellia oil, and that TPHIPPEs exhibited good resistance to UV light and thermal degradation. This study provides new insights into the high-value utilization of tea residue resources.

Isolation, purification and structural characterization of wheat-derived beer protein

Wheat beer is known for its rich and long-lasting foam, which is largely attributed to the proteins derived from wheat. In this study, a wheat-derived protein was isolated and purified from pure wheat malt wort based on foam properties and structurally characterized. The molecular weight of this protein is 15 kDa and its foaming and foam stability were 64.11 ± 1.02 % and 64.18 ± 1.50 %, respectively. This protein has the highest match with the wheat α-amylase inhibitor protein, with 9 matched peptides scoring above the threshold and the protein cover was 96.8 %. The protein is a predominantly β-folded, less crystalline protein with a negatively charged surface. It is abundant in glutamic acid and proline, and the hydrophobic amino acids account for 49.26 % of the total amino acid content. Scanning electron microscopy showed that the protein has a lamellar structure with a tiny number of small spherical particles adhering to the surface and irregular textures and depressions on the surface. The study of functional proteins of wheat-derived can help to control the degree of degradation of wheat beer during the saccharification process.

Pickering emulsions stabilized by soybean protein-based nanoparticles: A review of formulation, characterization, and food-grade applications

Pickering emulsions (PEs) have attracted considerable interest as platforms for encapsulating and controlling the release of bioactive compounds. Recent studies emphasize the potential of soybean protein nanoparticles to improve PE-based carriers, enhancing the stability and bioavailability of these compounds through unique self-assembly behaviors. This review analyzes recent advancements in the use of soybean protein nanoparticle-stabilized PEs as carriers for bioactive compounds. Various fabrication techniques, including physical, chemical, and biological methods, are explored. The effectiveness of soybean protein nanoparticles, both individually and in combination with polysaccharides or polyphenols, is evaluated, highlighting their roles in stabilizing PEs and enhancing functionality. Findings indicate that soybean protein nanoparticles are effective stabilizers for a wide range of PE structures, including oil-in-water, water-in-oil, high internal phase PEs, and Pickering emulgels. Fabrication methods, properties of Pickering particles, processing parameters, and formulations significantly influence the interfacial behavior, structure, and functionality of PEs. Fabrication methods, properties of Pickering particles, processing parameters, and formulations significantly influence the interfacial behavior, structure, and functionality of PEs. Additionally, innovative applications and future developments of soybean protein-based Pickering nanoparticles are discussed, emphasizing plant-based substitutes and advanced materials. Despite extensive discussions on soybean protein-based PEs in various food forms, research into their techno-functional properties and flavor mechanisms remains limited.

Recent advances in the plant protein-polyphenol interactions for the stabilization of emulsions

Proteins from plant sources including legumes, cereals and oilseeds are gaining attention due to their suitability for sustainable production, functionality, and positive consumer perception. On the other hand, polyphenols (PPs) are receiving considerable attention as natural ingredients in the human diet due to their potent antioxidant and anti-inflammatory properties. Recent studies indicate that the emulsifying properties of plant proteins (PLPs) can be improved after modification through covalent and/or non-covalent interactions with PPs due to the changes in the conformation and/or the surface chemistry of the proteins. Complexes formed between PLPs-PPs can serve as innovative ingredients for developing novel food products with modified textural properties. Also, Pickering emulsions, multiple emulsions, multilayer emulsions, nanoemulsions, and high internal phase emulsions can be stabilized by such systems to deliver bioactive compounds. This paper reviews the most recent research on the PLP-PP interactions and their role in the stabilization of various emulsion-based systems. A special emphasis is given to modifying the structure and functionality of PLPs and PPs. The challenges and opportunities of applying PLP-PP interactions in emulsion-based systems are also highlighted.

Development of soybean protein-based bioactive substances delivery systems: A systematic overview based on recent researches

Some bioactive substances in food have problems such as poor solubility, unstable chemical properties and low bioavailability, which limit their application in functional foods. In recent years, in order to improve the above problems of bioactive substances, soybean protein-based drug delivery systems have been developed. This article reviewed the structure and properties of several major soybean protein commonly used to construct bioactive substance delivery systems. Several common carrier types based on soybean protein were then introduced. The biological functions and limitations of several common soybean protein delivery bioactive substances and the role of soybean protein-based delivery systems were discussed. At present, soybean protein is the most widely used in drug delivery systems. Soybean protein-based nano-particles are currently the most commonly used delivery carriers. Soybean protein-based hydrogels, emulsions, microcapsules and electrospinning are also widely used. Polyphenols, carotenoids, vitamins, functional oils and probiotics are bioactive substances that are frequently delivered. However, in order to promote the application of soybean protein-based delivery systems in food, soybean protein peptidyl delivery vectors and collaborative delivery are the future development trends. In addition, a number of challenges must be addressed, including the sensitization of soybean protein, intolerance to environmental conditions, and the limitations of processing technologies.

Enhanced Bioaccessibility and Antioxidant Activity of Curcumin from Transglutaminase Cross-Linked Mulberry Leaf Protein-Stabilized High-Internal-Phase Pickering Emulsion: In Vivo and In Vitro Studies

The objective of this study was to formulate Pickering emulsions stabilized by transglutaminase cross-linked mulberry leaf protein (TG-MLP) nanoparticles as a delivery system for curcumin (Cur) and to assess its bioaccessibility both in vivo and in vitro. The encapsulation efficiency of curcumin in high-internal-phase Pickering emulsions (HIPEs) prepared at pH 10 with a 20 mg/mL concentration of TG-MLP reached 93%. Compared to Oil-Cur, Cur-HIPEs exhibited superior antioxidant activity. Furthermore, Cur-HIPEs demonstrated enhanced stability against ultraviolet irradiation, storage under dark and visible light, and heating, in contrast to Oil-Cur. Among the various conditions tested, HIPEs stabilized by TG-MLP nanoparticles at an ionic strength of 1000 mM offered the most effective protection for curcumin. Moreover, TG-MLP nanoparticles at pH 8 provided better stability for the formulated HIPEs compared to those at pH 6 and 10. During simulated gastrointestinal digestion, the bioaccessibility of curcumin in Cur-HIPEs was significantly increased to 30.1% compared to Oil-Cur. In murine studies, higher levels of curcumin were detected in the stomach, small intestine, rectum, ileum, and feces following administration of Cur-HIPEs, indicating improved protection, absorption, and potential biological activity during digestion. Consequently, HIPEs offer excellent protection and delivery for curcumin during digestion.

Fabrication of soy protein-polyphenol covalent complex nanoparticles with improved wettability to stabilize high-oil-phase curcumin emulsions

BACKGROUND

Recent studies have shown that the wettability of protein-based emulsifiers is critical for emulsion stability. However, few studies have been conducted to investigate the effects of varying epigallocatechin gallate (EGCG) concentrations on the wettability of protein-based emulsifiers. Additionally, limited studies have examined the effectiveness of soy protein-EGCG covalent complex nanoparticles with improved wettability as emulsifiers for stabilizing high-oil-phase (≥ 30%) curcumin emulsions.

RESULTS

Soy protein isolate (SPI)-EGCG complex nanoparticles (SPIEn) with improved wettability were fabricated to stabilize high-oil-phase curcumin emulsions. The results showed that EGCG forms covalent bonds with SPI, which changes its secondary structure, enhances its surface charge, and improves its wettability. Moreover, SPIEn with 2.0 g L -1 EGCG (SPIEn-2.0) exhibited a better three-phase contact angle (56.8 ± 0.3o) and zeta potential (-27 mV) than SPI. SPIEn-2.0 also facilitated the development of curcumin emulsion gels at an oil volume fraction of 0.5. Specifically, the enhanced network between droplets as a result of the packing effects and SPIEn-2.0 with inherent antioxidant function was more effective at inhibiting curcumin degradation during long-term storage and ultraviolet light exposure.

CONCLUSION

The results of the present study indicate that SPIEn with 2.0 g L -1 EGCG (SPIEn-2.0) comprises the optimum conditions for fabricating emulsifiers with improved wettability. Additionally, SPIEn-0.2 can improve the physicochemical stability of high-oil-phase curcumin emulsions, suggesting a novel strategy to design and fabricate high-oil-phase emulsion for encapsulating bioactive compounds. © 2024 Society of Chemical Industry.

The Preparation of W/O/W High-Internal-Phase Emulsions as Coagulants for Tofu: The Effect of the Addition of Soy Protein Isolate in the Internal Water Phase

Tofu quality is determined by a controlled coagulation process using a W/O/W emulsion coagulant. The impact of adding soy protein isolate (SPI) to the inner water phase on the stability of W/O/W high-internal-phase emulsions (HIPEs) and its application as a coagulant for tofu was assessed. No creaming occurred during 7-day storage with SPI concentrations up to 0.3%, while the emulsion droplets aggregated with 0.5% and 0.7% SPI. Emulsions containing 0.3% SPI maintained a constant mean droplet size after 21 days of storage and exhibited the lowest TURBISCAN stability index value. HIPE stability against freeze-thaw cycles improved after heating. HIPEs with SPI concentrations above 0.3% demonstrated an elastic gel-like behavior. The increased viscosity and aggregation of the protein around droplets indicated that the interaction among emulsion droplets could enhance stability. W/O/W HIPE coagulants significantly increased tofu yield, reduced hardness, and produced a more homogenous tofu gel compared to a MgCl2 solution. The HIPE with 0.3% SPI was found to be optimal for use as a coagulant for tofu.

Gastrointestinal digestion behavior and bioavailability of greenly prepared highly loaded myofibrillar-luteolin vehicle

In this study, the highly loaded myofibrillar protein (MP)-luteolin (Lut) complexes were noncovalently constructed by using green high-pressure homogenization technology (HPH) and high-pressure micro-fluidization technology (HPM), aiming to optimize the encapsulation efficiency of flavonoids in the protein-based vehicle without relying on the organic solvent (i.e. DMSO, ethanol, etc.). The loading efficiency of Lut into MPs could reach 100 % with a concentration of 120 μmol/g protein by using HPH (103 MPa, 2 passes) without ethanol adoption. The in vitro gastrointestinal digestion behavior and antioxidant activity of the complexes were then compared with those of ethanol-assisted groups. During gastrointestinal digestion, the MP digestibility of complexes, reaching more than 70.56 % after thermal treatment, was higher than that of sole protein. The release profile of Lut encapsulated in ethanol-containing and ethanol-free samples both well fitted with the Hixson-Crowell release kinetic model (R2 = 0.92 and 0.94, respectively), and the total phenol content decreased by ≥ 40.02 % and ≥ 62.62 %, respectively. The in vitro antioxidant activity (DPPH, ABTS, and Fe2+) of the digestive products was significantly improved by 23.89 %, 159.69 %, 351.12 % (ethanol groups) and 13.43 %, 125.48 %, 213.95 % (non-ethanol groups). The 3 mg/mL freeze-dried digesta significantly alleviated lipid accumulation and oxidative stress in HepG2 cells. The triglycerides and malondialdehyde contents decreased by at least 57.62 % and 67.74 % after digesta treatment. This study provides an easily approached and environment-friendly strategy to construct a highly loaded protein-flavonoid conjugate, which showed great potential in the formulation of healthier meat products.

High-pressure microfluidization enhanced the stability of sodium caseinate-EGCG complex-stabilized fish oil emulsion

Improving the emulsion-stabilizing effect of protein by chemical or physical modification has been paid much attention recently. Here, sodium caseinate (CS) was treated by high-pressure-microfluidization (HPM) under 0-100 MPa, and was further complexed with (-)-epigallocatechin-3-gallate (EGCG) to form an excellent emulsifier that stabilized fish oil emulsions. Results showed that HPM treatment (especially 80 MPa) significantly changed the secondary structure of CS, and 80 MPa-PCS-EGCG had the best emulsifying and antioxidant activities. In addition, after HPM treatment and EGCG bonding, CS formed a thicker interface layer on the surface of oil droplets, which could better protect the fish oil from the influence by oxygen, temperature and ion concentration. Moreover, the fish oil emulsion stabilized by PCS-EGCG complex significantly delayed the release of free fatty acids subjected to in vitro digestion. Conclusively, HPM-treated CS-EGCG complex could be a potential emulsifier to improve the stability of fish oil emulsions.

Enhancing the properties of soy protein isolate and dialdehyde starch films for food packaging applications through tannic acid crosslinking

The utilization of naturally derived biodegradable polymers, including proteins, polysaccharides, and polyphenols, holds significant promise in addressing environmental concerns and reducing reliance on nonrenewable resources. This study aimed to develop films with enhanced UV resistance and antibacterial capabilities by covalently cross-linking soy protein isolate (SPI) with dialdehyde starch (DAS) through the incorporation of tannic acid (TA). The covalent crosslinking of TA with DAS and SPI was shown to establish a stable chemical cross-linking network. The tensile strength of the resulting SPI/DAS/15TA film exhibited a remarkable increase of 208.27 % compared to SPI alone and 52.99 % compared to SPI/DAS film. Notably, the UV absorption range of SPI/DAS/10TA films extended from 200 nm to 389 nm. This augmentation can be attributed to the oxidation of TA's phenolic hydroxyl groups to quinone under alkaline conditions, which then facilitated cross-linking with the SPI chain via Michael addition and Schiff base reactions. Furthermore, the film demonstrated robust antibacterial properties due to the incorporation of TA. Collectively, the observed properties highlight the significant potential of the SPI/DAS/10TA film for applications in food packaging, where its enhanced mechanical strength, UV resistance, and antibacterial characteristics can contribute to improved product preservation and safety.

Advancements in lipid-based delivery systems for functional foods: a comprehensive review of literature and patent trends

Lipid-based delivery systems (LDS) have emerged as cornerstone techniques for bolstering the bioavailability of lipophilic bioactive compounds, addressing challenges related to solubility, stability, and absorption. This critical review examined a substantial dataset of 6,907 scientific articles and 3,021 patents from 2001-2023, elucidating the multifaceted evolution of LDS, with a particular focus on its industrial and patent-driven perspective. Notably, there were pronounced surges in functional food patent applications in 2004, 2011, and 2019. The trajectory revealed a shift from foundational nanoemulsions to more complex structures, such as double/multiple emulsions, solid lipid nanoparticles, Pickering emulsions, and bigels. The review further identified the top 10 leading institutions shaping this domain. Technologies like spray-drying, microfluidics, and phase gelation had revolutionized the landscape, resulting in refined sensory experiences, innovative reduced-fat formulations, enriched beverages, tailor-made infant nutrition, and nuanced release mechanisms for flavors. The review also spotlighted current research frontiers, notably Pickering emulsions, bigels, and multiple emulsions. These emerging technologies not only exemplified the ongoing innovation in the field but also underscored their potential in reshaping the future landscape of value-added functional foods.

Lipid oxidation in emulsions: New insights from the past two decades

Lipid oxidation constitutes the main source of degradation of lipid-rich foods, including food emulsions. The complexity of the reactions at play combined with the increased demand from consumers for less processed and more natural foods result in additional challenges in controlling this phenomenon. This review provides an overview of the insights acquired over the past two decades on the understanding of lipid oxidation in oil-in-water (O/W) emulsions. After introducing the general structure of O/W emulsions and the classical mechanisms of lipid oxidation, the contribution of less studied oxidation products and the spatiotemporal resolution of these reactions will be discussed. We then highlight the impact of emulsion formulation on the mechanisms, taking into consideration the new trends in terms of emulsifiers as well as their own sensitivity to oxidation. Finally, novel antioxidant strategies that have emerged to meet the recent consumer's demand will be detailed. In an era defined by the pursuit of healthier, more natural, and sustainable food choices, a comprehensive understanding of lipid oxidation in emulsions is not only an academic quest, but also a crucial step towards meeting the evolving expectations of consumers and ensuring the quality and stability of lipid-rich food products.

Microfluidized hemp protein isolate: an effective stabilizer for high-internal-phase emulsions with improved oxidative stability

BACKGROUND

Hemp protein isolates (HPIs), which provide a well-balanced profile of essential amino acids comparable to other high-quality proteins, have recently garnered significant attention. However, the underutilized functional attributes of HPIs have constrained their potential commercial applications within the food and agriculture field. This study advocates the utilization of dynamic-high-pressure-microfluidization (DHPM) for the production of stable high-internal-phase emulsions (HIPEs), offering an efficient approach to fully exploit the potential of HPI resources.

RESULTS

The findings underscore the effectiveness of DHPM in producing HPI as a stabilizing agent for HIPEs with augmented antioxidant activity. Microfluidized HPI exhibited consistent adsorption and anchoring at the oil-water interface, resulting in the formation of a dense and compact layer. Concurrently, the compression of droplets within HIPEs gave rise to a polyhedral framework, conferring viscoelastic properties and a quasi-solid behavior to the emulsion. Remarkably, HIPEs stabilized by microfluidized HPI demonstrated superior oxidative and storage stability, attributable to the establishment of an antioxidative barrier by microfluidized HPI particles.

CONCLUSION

This study presents an appealing approach for transforming liquid oils into solid-like fats using HPI particles, all without the need for surfactants. HIPEs stabilized by microfluidized HPI particles hold promise as emerging food ingredients for the development of emulsion-based formulations with enhanced oxidative stability, thereby finding application in the food and agricultural industries. © 2023 Society of Chemical Industry.

Pickering emulsions stabilized by ternary complexes involving curcumin-modified zein and polysaccharides with different charge amounts for encapsulating β-carotene

In this research, zein was modified with curcumin to obtain covalent and non-covalent complexes. They were further covered with polysaccharides (gum arabic or gum karaya) possessing different surface charge amounts to obtain ternary nanoparticles for preparing novel antioxidant Pickering emulsions. The addition of curcumin to the zein-polysaccharide system significantly retarded the UV degradation of the encapsulated β-carotene (maximum retention ∼ 97%) and effectively inhibited the lipid oxidation of the emulsions. In vitro gastrointestinal digestion assays showed that gum karaya significantly delayed the release of free fatty acids, thereby improving the bioaccessibility of β-carotene (the highest bioavailability ∼ 38%). By comparing the performance of the complex particles, the weakly charged polysaccharides were superior to the highly charged ones, while zein-curcumin covalent binding was superior to non-covalent binding in the above experiments. This study provides innovative perspectives on the use of novel Pickering emulsions to provide ideal protection and bioavailability of lipophilic nutraceuticals.

Developing biopolymer-stabilized emulsions for improved stability and bioaccessibility of lutein

Lutein is essential for infant visual and cognitive development but has low stability and solubility. This study aimed to enhance the stability and bioaccessibility of lutein using oil-in-water emulsions stabilized with biopolymers. Commercially available octenylsuccinylated (OS) starches, including capsule TA® (CTA), HI-CAP®100 (HC), and Purity Gum® 2000 (PG), along with gum Arabic (GA) variants Ticaloid acacia Max® (TAM), TICAmulsion® 3020 (TM), and pre-hydrate gum Arabic (PHGA), were chosen as emulsifiers. By screening the effect of biopolymer concentration and oil volume fraction (Φ), emulsions stabilized with CTA, HC, or TM at 20% and 30% (w/v) concentration and 70% Φ exhibited a gel-like structure and were selected for further assessments. After a week at 25 °C, emulsions stabilized by CTA and HC showed no significant change in droplet size, while TM emulsion exhibited a 1.58-fold increase. At 45 °C, all emulsions exhibited increase in droplet size. Lutein retention is higher in CTA emulsions at both storage temperatures than free lutein. In vitro bioaccessibility of all lutein emulsions was higher than that of free lutein. These findings highlight the superior stability and bioaccessibility of the lutein emulsion stabilized by OS starch, positioning it as a promising carrier to broaden lutein applications in infant foods.

Tunable rheological properties of high internal phase emulsions stabilized by phosphorylated walnut protein/pectin complexes: The effects of pH conditions, mass ratios, and concentrations

The current study reported high internal phase emulsions (HIPEs) stabilized by phosphorylated walnut protein/pectin complexes (PWPI/Pec) and elucidated how their rheological properties were modulated by pH conditions, mass ratios, and concentrations of the complexes. At pH 3.0, the HIPEs stabilized by PWPI/Pec exhibited smaller oil droplet sizes, as well as higher storage modulus (G') and flow stress, in comparison to those stabilized by the complexes formed at pH 4.0-6.0. These observations can be directly linked to pH-dependent changes in particle size, surface hydrophobicity, and wettability of the PWPI/Pec complexes. Rheological analysis revealed that all generated HIPEs displayed weak strain overshoot behavior, irrespective of pH conditions. Notably, HIPEs stabilized by PWPI/Pec at mass ratios of 2:1 and 4:1 showed enlarged oil droplet sizes, lower G' and flow stress but higher flow strain with unaffected loss factor compared to those stabilized by PWPI/Pec 1:1. However, reducing the concentration of PWPI/Pec led to a simultaneous decrease in G', flow stress, and flow strain, along with a significant increase in the loss factor of the HIPEs. Furthermore, the HIPEs formed with 1% PWPI/Pec 1:1 at pH 3.0 demonstrated excellent stability against heat treatment and long-term storage. These results provide valuable insights into the modulation of rheological characteristics of HIPEs and offer guidance for the application of walnut protein-based stabilizers in HIPE systems.

Stabilization of oil-in-water high internal phase emulsions with octenyl succinic acid starch and beeswax oleogel

High internal phase emulsions (HIPEs) based on beeswax (BW) oleogels and octenyl succinic acid starch (OSA starch) were prepared by a facile one-step method. Effects of the oleogelation of internal phase on the formation, stability and functionality of the HIPEs were investigated. OSA starch absorbed at the interface allowed high surface charge (|ζ| > 25 mV) of the droplets, and small droplet size (d ≈ 5 m). Microstructural observation suggested that the HIPEs were of O/W type with droplets packed tightly. With the increase in BW content (0-4 %), the particle size (4-7 μm) and ζ-potential (-25 ~ -30 mV) of the HIPEs were first decreased and then increased. Stability analysis revealed that the addition of BW effectively improved emulsion stability against centrifugation, freeze-thawing, changes in pH and ionic strength, and the HIPE with 2 % BW presented the best stability. Rheological tests indicated that the HIPEs with higher content of BW exhibited higher storage modulus, solid-like properties, and shear thinning behaviors. Creep-recovery results implied that the oleogelation enhanced the structure of HIPEs and improved the deformation resistance of the systems. When subjected to light and heat, oleogel-in-water HIPEs showed advantages in protecting β-carotene from degradation, and β-carotene in the HIPEs with 2 % BW had the lowest degradation rate. These findings suggested that gelation of oil phase could improve the stability of HIPEs and the encapsulation capability, which would be meaningful for the development of novel healthy food.

Conjugation of soymilk protein and arabinoxylan induced by peroxidase to improve the gel properties of tofu

Arabinoxylan (AX) can form stable covalent bonds with protein to improve gel properties. We aimed to prepare a conjugate between soymilk protein (SMP) and AX by peroxidase, followed by the addition of transglutaminase (TG) to prepare tofu gels. The conjugate's properties and their effects on the mechanical properties, rheological properties, and microstructure of tofu gels were evaluated. Results revealed that the α-helix content decreased, the β-sheet content increased, and the surface hydrophobicity reduced from 1.60 × 105 to 1.27 × 105. The optimal amount of AX required to improve the properties of tofu gel was 1.0%. The tofu gel showed better hardness (118.44 g), water holding capacity (WHC) (86.17%), and higher storage modulus (G') and loss modulus (G″). Low-Field NMR (LF-NMR) showed that the water was evenly distributed. Scanning electron microscopy (SEM) revealed a denser and more regular three-dimensional gel network.

High internal phase emulsion stabilized by sodium caseinate:quercetin complex as antioxidant emulsifier

High internal phase emulsion (HIPE) was produced and stabilized using a novel antioxidant emulsifier formed by the complexation between sodium caseinate (SC) and quercetin (Q). Colloidal complexes, produced via an alkaline process, showed great ability to reduce the interfacial tension between oil-water phases, promoting stabilization of the HIPEs even at low concentrations (1.5% w/v in the aqueous fraction). HIPEs at 0.80 volume fraction of dispersed phase presented remarkable viscosity due to the high-packing network of oil droplets surrounded by a thin liquid layer. Moreover, the emulsions showed a gel-like behavior and kinetic stability for 45-days at 25 °C. The approach of SC:Q complexes on HIPEs development is promising to reduce lipid oxidation, translated by the formation of hydroperoxides and malondialdehyde during storage, especially for the complex formed with the highest amount of the phenolic compound. In this study, the development of HIPEs with outstanding kinetic and oxidative stability is reported as a potential alternative for the development of healthier products with reduced saturated and trans-fat content.

Glycation Improved the Interfacial Adsorption and Emulsifying Performance of β-Conglycinin to Stabilize the High Internal Phase Emulsions

This study investigated the interfacial adsorption and emulsifying performance of glycated β-conglycinin (7S) with D-galactose (Gal) at various times. Results indicated that glycation increased the particle sizes and zeta potentials of glycated 7S by inducing subunit dissociation. Glycation destroyed the tertiary structures and transformed secondary structures from an ordered one to a disordered one, leading to the more flexible structures of glycated 7S compared with untreated 7S. All these results affected the structural unfolding and rearrangement of glycated 7S at the oil/water interface. Therefore, glycated 7S improved interfacial adsorption and formed an interfacial viscoelasticity layer, increasing emulsifying performance to stabilize high internal phase emulsions (HIPE) with self-supportive structures. Furthermore, the solid gel-like network of HIPE stabilized by glycated 7S led to emulsification stability. This result provided new ideas to improve the functional properties of plant proteins by changing the interfacial structure.

High internal phase emulsions stabilized by alkaline-extracted walnut protein isolates and their application in food 3D printing

Alkaline-extracted walnut protein isolates showed relatively poor solubility and emulsifying properties in many previous studies. However, whether they can be used as potential emulsifiers to stabilize high internal phase emulsions (HIPEs) remains unknown. Herein, walnut protein isolates were prepared by alkaline extraction from walnut kernels with or without pellicles (named PAWPI and AWPI, respectively). PAWPI conjugated with pellicle polyphenols showed improved solubility and higher antioxidant capacity than AWPI. HIPEs were fabricated via a one-step method using AWPI or PAWPI as the sole protein emulsifier. HIPEs (oil fraction of 0.8, with 0.1% β-carotene) could be stabilized by PAWPI at a relatively low concentration of 0.2% (w/v), while at least 1% (w/v) AWPI was required to effectively stabilize HIPEs. HIPEs stabilized by PAWPI had smaller oil droplet sizes than those stabilized by AWPI. Rheological analysis indicated that PAWPI-stabilized HIPEs showed higher viscosity and better viscoelasticity than AWPI-stabilized HIPEs. Large-amplitude oscillation shearing analysis suggested that PAWPI-stabilized HIPEs were stiffer but more brittle than AWPI-stabilized HIPEs. Moreover, both PAWPI- and AWPI-stabilized HIPEs exhibited good storage stability and were relatively stable against heat treatment and ionic strength. PAWPI-stabilized HIPEs showed a higher protective capacity for encapsulated β-carotene than AWPI-stabilized HIPEs. In addition, PAWPI-stabilized HIPEs showed good 3D printability and could be used as a promising edible ink.

Ethanol as a switch to induce soybean lipophilic protein self-assembly and resveratrol delivery

Protein-based nanoparticles or nanocarriers of emulsion systems have piqued the interest of nutrition and health care goods. As a result, this work examines the characterisation of ethanol-induced soybean lipophilic protein (LP) self-assembly for resveratrol (Res) encapsulation, particularly the influence on emulsification. By varying the ethanol content ([E]) in the range of 0-70% (v/v), the structure, size, and morphology of LP nanoparticles may be adjusted. Similarly, the self-assembled LPs have a strong [E] dependency on the encapsulation efficiency of Res. For [E] = 40% (v/v), Res had the highest encapsulation efficiency (EE) and load capacity (LC) of 97.1% and 141.0 μg/mg nanoparticles, respectively. Most of the Res was encapsulated by the hydrophobic core of LP. Moreover, for [E] = 40% (v/v), LP-Res showed significantly improved emulsifying properties, independent of low-oil or high-oil emulsion systems. Furthermore, the ethanol-induced production of appropriate aggregates increased emulsion system stability, hence increasing Res retention during storage.

Advances in preparation and application of food-grade emulsion gels

Emulsion gel is a semi-solid or solid material with a three-dimensional net structure produced from emulsion through physical, enzymatic, chemical methods or their combination. Emulsion gels are widely used in food, pharmaceutical and cosmetic industries as carriers of bioactive substances and fat substitutes due to their unique properties. The modification of raw materials, and the application of different processing methods and associated process parameters profoundly affect the ease or difficult of gel formation, microstructure, hardness of the resulting emulsion gels. This paper reviews the important research undertaken in the last decade focusing on classification of emulsion gels, their preparation methods, the influence of processing method and associated process parameters on structure-function of emulsion gels. It also highlights current status of emulsion gels in food, pharmaceutical and medical industries and provides future outlook on research directions requiring to provide theoretical support for innovative applications of emulsion gels, particularly in food industry.

pH-Shifting combined with ultrasound treatment of emulsion-filled β-conglycinin gels as β-carotene carriers: Effect of emulsion concentration on gel properties

In this work, emulsion-filled gels were prepared from natural and pH-shifting combined with ultrasound β-conglycinin (7S) as emulsifiers. The emulsifier modification and emulsion concentrations (5, 10, 15, 20 wt%) were evaluated on the structural and β-carotene release properties of the gels. Compared to the 7S hydrogel, the emulsion-filled gels exhibited better water-holding and textural properties. The 7S modification and the increase in emulsion concentration resulted in altered water distribution and improved microstructure and rheological properties of the emulsion-filled gels. The dense and homogeneous gel network was formed at an emulsion content of 15 wt%. The gels were regulated by different release kinetics in a simulated gastrointestinal environment. M-15 showed the highest bioaccessibility and chemical stability (72.25% and 89.87%) with good slow-release properties of β-carotene. These results will guide the development of encapsulated delivery systems for gel food products.

Stability, oxidizability, and topical delivery of resveratrol encapsulated in octenyl succinic anhydride starch/chitosan complex-stabilized high internal phase Pickering emulsions

High internal phase Pickering emulsions (HIPPEs) stabilized with octenyl succinic anhydride starch/chitosan complexes were examined as a topical delivery vehicle for resveratrol. All resveratrol-loaded HIPPEs showed stable gel-like network structures, with the droplet size and microrheological properties largely dependent on the complex concentrations. HIPPEs exhibited strong stability when subjected to light, high temperature, UV radiation and freeze-thaw treatment, and resveratrol retention was greatly improved with the increasing addition of complexes and resveratrol. High amounts of resveratrol facilitated the antioxidant activity of HIPPEs, whereas sustained release of resveratrol was mainly related to the existence of complex interfacial layers. Moreover, HIPPEs overcome the stratum corneum barrier, with an approximately 3-5-fold increase in resveratrol deposition in deep skin compared to bulk oil. In conclusion, the emulsion composition (especially at the particle level) was vital for the effectiveness of HIPPEs as a carrier, which may provide new opportunities to design topical delivery systems.

Targeting Interfacial Location of Phenolic Antioxidants in Emulsions: Strategies and Benefits

It is important to have larger proportions of health-beneficial polyunsaturated lipids in foods, but these nutrients are particularly sensitive to oxidation, and dedicated strategies must be developed to prevent this deleterious reaction. In food oil-in-water emulsions, the oil-water interface is a crucial area when it comes to the initiation of lipid oxidation. Unfortunately, most available natural antioxidants, such as phenolic antioxidants, do not spontaneously position at this specific locus. Achieving such a strategic positioning has therefore been an active research area, and various routes have been proposed: lipophilizing phenolic acids to confer them with an amphiphilic character; functionalizing biopolymer emulsifiers through covalent or noncovalent interactions with phenolics; or loading Pickering particles with natural phenolic compounds to yield interfacial antioxidant reservoirs. We herein review the principles and efficiency of these approaches to counteract lipid oxidation in emulsions as well as their advantages and limitations.

Novel Colloidal Food Ingredients: Protein Complexes and Conjugates

Food proteins, polysaccharides, and polyphenols are natural ingredients with different functional attributes. For instance, many proteins are good emulsifiers and gelling agents, many polysaccharides are good thickening and stabilizing agents, and many polyphenols are good antioxidants and antimicrobials. These three kinds of ingredients can be combined into protein, polysaccharide, and/or polyphenol conjugates or complexes using covalent or noncovalent interactions to create novel multifunctional colloidal ingredients with new or improved properties. In this review, the formation, functionality, and potential applications of protein conjugates and complexes are discussed. In particular, the utilization of these colloidal ingredients to stabilize emulsions, control lipid digestion, encapsulate bioactive ingredients, modify textures, and form films is highlighted. Finally, future research needs in this area are briefly proposed. The rational design of protein complexes and conjugates may lead to the development of new functional ingredients that can be used to create more nutritious, sustainable, and healthy foods.

High internal phase emulsion gels stabilized by phosphorylated perilla protein isolate for protecting hydrophobic nutrients: Adjusting emulsion performance by incorporating chitosan-protocatechuic acid conjugate

The delivery vehicles based on protein-polysaccharide-polyphenol are promising methods to encapsulate bioactive components with the aim of improving their solubility and bioavailability. In this study, chitosan-protocatechuic acid (CSPA) conjugate interacted with phosphorylated perilla protein isolate (LZPI) to engineer a composite antioxidant interfacial architecture to delay lipid oxidation and regulate the stability and digestion profiles of β-carotene loaded in high internal phase emulsions (HIPEs). Compared to LZPI, the LZPI-CSPA complexes formed by hydrogen bond and electrostatic interaction showed improved wettability and reduced interfacial tension, which facilitated their adsorption at the interface. Furthermore, the addition of CSPA conjugate promoted the formation of interconnected network structure of LZPI-stabilized HIPEs, thereby endowing them with excellent viscoelasticity and storage stability. Moreover, the denser interfacial film based on LZPI-CSPA complexes effectively decreased the contents of lipid hydroperoxide and malondialdehyde in HIPEs, thus improving their oxidation stability. The encapsulation of β-carotene by LZPI-CSPA complex-stabilized HIPEs could further enhance its retention rate against different environmental stresses. After in vitro simulated digestion, the bioaccessibility of β-carotene also improved, reaching the highest value in HIPEs containing 1.5 % CSPA conjugate. These findings will give a reference for the fabrication of delivery vehicles to enhance the stability and bioaccessibility of bioactive components.

Stability of protein particle based Pickering emulsions in various environments: review on strategies to inhibit coalescence and oxidation

The emerging research interests in fabrication of protein particles as soft-particle emulsifiers show the prospective potential of using protein particles in novel poly-phase dispersing food systems. This review first provides a comprehensive summary and analysis on the dominant role of key physicochemical properties of protein particles including wettability, morphology, surface charge and protein concentration on their emulsifying abilities to construct Pickering emulsions. It was found that the constructed emulsions showed high sensitivity to changes in pH, ionic strength and temperature (thermal and freeze-thaw treatment). Moreover, oxidation remains as a challenge for protein particle based Pickering emulsions during prolonged storage, reducing their acceptance in food products. Current strategies for improving the stability of these emulsions to variable aqueous conditions and variable temperatures, and restricting oxidation event are summarized. In summary, an "ideal" protein particle-based Pickering emulsion system is proposed, encompassing aspects of interfacial property, emulsion network and texture, and antioxidant enrichment, thus promoting industrial translation into novel food and nutraceutical products.

Biopolymer-based pickering high internal phase emulsions: Intrinsic composition of matrix components, fundamental characteristics and perspective

Pickering HIPEs have received tremendous attention in recent years due to their superior stability and unique solid-like and rheological properties. Biopolymer-based colloidal particles derived from proteins, polysaccharides and polyphenols have been demonstrated to be safety stabilizers for the construction of Pickering HIPEs, which can meet the demands of consumers for "all-natural" products and provide "clean-label" foods. Furthermore, the functionality of these biopolymers can be further extended by forming composite, conjugated and multi-component colloidal particles, which can be used to modulate the properties of the interfacial layer, thereby adjusting the performance and stability of Pickering HIPEs. In this review, the factors affecting the interfacial behavior and adsorption characteristics of colloidal particles are discussed. The intrinsic composition of matrix components and fundamental characteristics of Pickering HIPEs are emphatically summarized, and the emerging applications of Pickering HIPEs in the food industry are reviewed. Inspired by these findings, future perspectives concerning this field are also put forward, including (1) the exploration of the interactions between biopolymers used to produce Pickering HIPEs and target food ingredients, and the influence of the added biopolymers on the flavor and mouthfeel of the products, (2) the investigation of the digestion properties of Pickering HIPEs under oral administration, and (3) the fabrication of stimulus-responsive or transparent Pickering HIPEs. This review will give a reference for exploring more natural biopolymers for Pickering HIPEs application development.

Sea bass protein-polyphenol complex stabilized high internal phase of algal oil Pickering emulsions to stabilize astaxanthin for 3D food printing

The protective effect of sea bass protein (SBP)-(-)-epigallocatechin-3-gallate (EGCG) covalent complex-stabilized high internal phase (algal oil) Pickering emulsions (HIPPEs) on astaxanthin and algal oils was demonstrated in this study. The SBP-EGCG complex with better wettability and antioxidant activity was formed by the free radical-induced reaction to stabilize HIPPEs. Our results show that the SBP-EGCG complex formed dense particle shells surrounding the oil droplets, and the shells were crosslinked with the complex in the continuous phase to produce a network structure. The rheological analysis demonstrated that the SBP-EGCG complex endowed HIPPEs with high viscoelasticity, high thixotropic recovery, and good thermal stability, which were beneficial for three-dimensional (3D) printing applications. HIPPEs stabilized by SBP-EGCG complex were applied to improve the stability and bioaccessibility of astaxanthin and to delay algal oil lipid oxidation. The HIPPEs might become a food-grade 3D printing material served as a delivery system for functional foods.

Protein-Based High Internal Phase Pickering Emulsions: A Review of Their Fabrication, Composition and Future Perspectives in the Food Industry

Protein-based high internal phase Pickering emulsions (HIPEs) are emulsions using protein particles as a stabilizer in which the volume fraction of the dispersed phase exceeds 74%. Stabilizers are irreversibly adsorbed at the interface of the oil phase and water phase to maintain the droplet structure. Protein-based HIPEs have shown great potential for a variety of fields, including foods, due to the wide range of materials, simple preparation, and good biocompatibility. This review introduces the preparation routes of protein-based HIPEs and summarizes and classifies the preparation methods of protein stabilizers according to their formation mechanism. Further outlined are the types and properties of protein stabilizers used in the present studies, the composition of the oil phase, the encapsulating substances, and the properties of the constituted protein-based HIPEs. Finally, future development of protein-based HIPEs was explored, such as the development of protein-based stabilizers, the improvement of emulsification technology, and the quality control of stabilizers and protein-based HIPEs.

Fabrication and stabilization mechanisms of Pickering emulsions based on gliadin/arabinoxylan complexes

In the present work, the Pickering emulsions with enhanced oxidation stability were fabricated using gliadin (G)/arabinoxylan nanoparticles (GANPs). The influence of different G/AX ratios on the properties of GANPs and corresponding physicochemical characteristics of Pickering emulsions were investigated. Results indicated that the droplet size and ζ-potential of Pickering emulsions declined with the decrease of G/AX ratios. Pickering emulsion with the smallest G/AX ratio (1:4) exhibited excellent oxidative and coalescence stability due to the formation of viscoelastic gel network, which was supported by confocal laser scanning microscopy (CLSM) images. Furthermore, the increase of salt ions in a lower concentration (0-0.2 M) was conducive to the flocculation of the droplets, while further increasing the NaCl concentration impaired the emulsion stability. Such elements revealed that G/AX complex is a promising stabilizer of Pickering emulsions with prominent antioxidant activity, which have favorable potential applications in protecting the functional properties of polyunsaturated fatty acids (PUFAs).

Progress in the Application of Food-Grade Emulsions

The detailed investigation of food-grade emulsions, which possess considerable structural and functional advantages, remains ongoing to enhance our understanding of these dispersion systems and to expand their application scope. This work reviews the applications of food-grade emulsions on the dispersed phase, interface structure, and macroscopic scales; further, it discusses the corresponding factors of influence, the selection and design of food dispersion systems, and the expansion of their application scope. Specifically, applications on the dispersed-phase scale mainly include delivery by soft matter carriers and auxiliary extraction/separation, while applications on the scale of the interface structure involve biphasic systems for enzymatic catalysis and systems that can influence substance digestion/absorption, washing, and disinfection. Future research on these scales should therefore focus on surface-active substances, real interface structure compositions, and the design of interface layers with antioxidant properties. By contrast, applications on the macroscopic scale mainly include the design of soft materials for structured food, in addition to various material applications and other emerging uses. In this case, future research should focus on the interactions between emulsion systems and food ingredients, the effects of food process engineering, safety, nutrition, and metabolism. Considering the ongoing research in this field, we believe that this review will be useful for researchers aiming to explore the applications of food-grade emulsions.

Ultrasonic-assisted pH shift-induced interfacial remodeling for enhancing the emulsifying and foaming properties of perilla protein isolate

In order to expand the applications of plant protein in food formulations, enhancement of its functionalities is meaningful. Herein, the effects of ultrasonic (20 KHz, 400 W, 20 min)-assisted pH shift (pH 10 and 12) treatment on the structure, interfacial behaviors, as well as the emulsifying and foaming properties of perilla protein isolate (PPI) were investigated. Results showed that the solubility of PPI treated by ultrasonic-assisted pH shift (named UPPI-10/12) exceeded 90 %, which was at least 2 and 1.4 times that of untreated PPI and ultrasound-based PPI. Meanwhile, UPPI-10/12 possessed higher foamability (increasing by at least 1.2 times) and good emulsifying stability. Ultrasonic-assisted pH shift treatment decomposed large PPI aggregates into tiny particles, evident from the dynamic light scattering (DLS) and atomic force microscopy results. Besides, this approach induced a decrease in α-helix of PPI and an increase in β-sheet, which might result in the exposure of the hydrophobic group on the structural surface of PPI, thus leading to the increase of surface hydrophobicity. The smaller size and higher hydrophobicity endowed UPPI-10/12 faster adsorption rate, tighter interfacial structure, and higher elastic modulus at the air- and oil-water interfaces, evident from the cryo-SEM and interfacial dilatational rheological results. Thus, the emulsifying and foaming properties could evidently enhance. This study demonstrated that ultrasonic-assisted pH shift technique was a simple approach to effectively improve the functional performance of PPI.

Review on the Regulation of Plant Polyphenols on the Stability of Polyunsaturated-Fatty-Acid-Enriched Emulsions: Partitioning Kinetic and Interfacial Engineering

The plant polyphenols are normally presented as natural functional antioxidants, which also possess the potential ability to improve the physicochemical stability of polyunsaturated fatty acid (PUFA)-enriched emulsions by interface engineering. This review discussed the potential effects of polyphenols on the stability of PUFA-enriched emulsions from the perspective of the molecular thermodynamic antioxidative analysis, the kinetic of interfacial partitioning, and the covalent and non-covalent interactions with emulsifiers. Recently, research studies have proven that the interfacial structure of emulsions can be concurrently optimized via promoting interfacial partitioning of polyphenols and further increasing interfacial thickness and strength. Moreover, the applied limitations of polyphenols in PUFA-enriched emulsions were summarized, and then some valuable and constructive viewpoints were put forward in this review to provide guidance for the use of polyphenols in constructing PUFA-enriched emulsions.

Fabrication of food-grade Pickering high internal phase emulsions (HIPEs) stabilized by a dihydromyricetin and lysozyme mixture

This study evaluated the feasibility of fabricating food-grade HIPEs using a dihydromyricetin and lysozyme mixture. The effects of the oil phase volume fraction (φ), composition (lysozyme:dihydromyricetin, k), and addition amount (w) of the mixture on the formation and properties of the HIPEs were analyzed. Then, the interactions of dihydromyricetin and lysozyme were investigated. The results indicated that when w was 0.4%, HIPEs with φ value of 90% could be obtained. Furthermore, the k also affected the microstructure, mechanical properties, oil oxidation, and lutein protection ability of the HIPEs. However, the presence of dihydromyricetin did not affect lysozyme activity. Both isothermal titration calorimetry and molecular simulations proved that they did not form a typical host-guest complex. But, dihydromyricetin could absorb on the lysozyme surface. Therefore, we speculated that lysozyme and dihydromyricetin particles could overlap and form a 3D network structure to stabilize the HIPEs, which was consistent with the microstructure observations.

Characterization of a Novel High Internal Phase Pickering Emulsions Stabilized by Soy Protein Self-Assembled Gel Particles

In this paper, a novel high-internal-phase Pickering emulsion (HIPPE) prepared by acid-induced self-assembly SPI gel (A/S-SPIG) was investigated. The steady-state shear test results showed that all HIPPEs were typical shear thinning emulsion, which could form stable emulsion (0.2–1.2% SPI concentration). The network structure of HIPPE stabilized by A/S-SPIG particles (0.2–1.2% SPI concentration) was continuously enhanced with increasing SPI concentration. The high concentration of SPI particles increased the crystallization temperature of the stabilized HIPPE. Meanwhile, at a concentration of 1.2%, HIPPE has the best cohesive property and stability against delamination due to weakened mobility. In conclusion, A/S-SPIG was proved excellent HIPPE stabilized particle.