CO2 supercritical fluid extraction of pulp and nut oils from Terminalia catappa fruits: Thermogravimetric behavior, spectroscopic and fatty acid profiles

Study on the Extraction of Nervonic Acid from the Oil of Xanthoceras sorbifolium Bunge Seeds

Seven fatty acids were detected by GC-MS in Xanthoceras sorbifolium Bunge seed oil extracted at different temperatures, including Palmitic acid C16:0, Stearic acid C18:0, Oleic acid C18:1, Eicosenoic acid C20:1, Docosenoic acid C22:1, Tetracosenoic acid C24:1, and Linoleic acid C18:2. The highest content of nervonic acid (NA) was found in Xanthoceras sorbifolium Bunge seed oil extracted at 70 °C. Three methods were selected to analyze the extraction rate of nervonic acid in Xanthoceras sorbifolium Bunge seed oil, including urea complexation, low-temperature solvent crystallization, and a combined treatment using these two methods. The final content of nervonic acid obtained was 14.07%, 19.66%, and 40.17%, respectively. The combined treatment method increased the purity of nervonic acid in Xanthoceras sorbifolium Bunge seed oil by 12.62 times. Meanwhile, thermogravimetric behavior analysis of samples extracted using different methods was conducted by thermogravimetric analyzer, which suggested that the thermal stability of the samples extracted by the combined treatment was enhanced. These results can provide a new process parameter and scientific basis for the extraction of NA. At the same time, FTIR and NMR were also used to characterize the combined extraction sample, and the structure of the samples was proved.

Lipids from the purple and white açaí (Euterpe oleracea Mart) varieties: nutritional, functional, and physicochemical properties

The Brazilian superfruit called Açaí or Assaí has gained interested from researcher and consumers worldwide, due to its health-related properties. In this context, this pioneering study aimed to compare the physicochemical, nutritional, and thermal properties of vegetable oils obtained from two varieties of açaí (Euterpe oleracea), purple and white. Both açaí oils from white (WAO) and purple (PAO) varieties were obtained by using the conventional solid-liquid extraction, which resulted in oil yields ranging from 52 to 61%. WAO and PAO were analyzed by their edibility quality parameters given the recommendations from Codex Alimentarius; their nutritional functionality indices and their composition of fatty acids and triglycerides content were estimated. Both oils showed low levels of acidity and peroxides, <1.8 mg KOH g-1 and < 1.7 mEq kg-1, respectively, which are good indicators of their preservation status, agreeing with the food regulations. PAO and WAO showed differences among the composition of fatty acids, mainly related to the content of monounsaturated fatty acids (MUFAs), which were 62.5 and 39.5%, respectively, mainly oleic acid. Regarding the polyunsaturated fatty acids (PUFAs), the WAO showed up to 23% of linoleic acid, whereas the PAO exhibited up to 11% of it. These differences reflect on the values of the nutritional functionality indices, atherogenic (AI), thrombogenic (IT), and hypocholesterolemic/hypercholesterolemic ratio (H/H). Both PAO and WAO showed low levels of AI and TI and superior values of H/H than other oilseeds from the literature. These results indicate the nutritional properties of açaí oils regarding a potential cardioprotective effect when included in a regular dietary intake. The thermogravimetric behavior and the evaluation of oxidation status by infrared spectroscopy (FTIR) were also studied. Both açaí oils demonstrated higher thermal stability (with an onset temperature ranging from 344 to 350 °C) and low indications of oxidation status, as no chemical groups related to it were noted in the FTIR spectrum, which agrees with the determined acidity and peroxide content. Moreover, the FTIR analysis unveiled characteristic chemical groups related to fatty acids and triglycerides, agreeing with the literature reports. These findings collectively contribute to a deeper comprehension of the nutritional and functional properties between white and purple açaí oils, offering valuable insights into their potential health, food, and industrial applications.

Chemical-functional composition of Terminalia catappa oils from different varieties

This study aimed to extract and physical-chemically characterize Terminalia catappa L. kernel oil from purple (CR) and yellow (CA) varieties. Physical-chemical parameters, composition of fatty acids, nutritional quality indices, bioactive compounds and antioxidant capacity of both oil varieties were evaluated according to the literature. Both oils presented low levels of acidity and peroxides, besides the predominance of unsaturated fatty acids, ~63% of oleic and ~26% of linoleic acids, which influenced its nutritional indices. The CR oil variety exhibited a higher content in anthocyanin (18.3 ± 1.5 mg·100 g-1), ascorbic acid (68.4 ± 2.02 mg·100 g-1) and total polyphenol contents (152.3 ± 2.4 mg GAE·g-1), and a good antioxidant activity (38.6 ± 2.2 μg TE·g-1) determined by TEAC assay, when compared to the CA oil (p < 0.05). Therefore, the results confirm the importance of T. catappa as a lipid source for human consumption to be used in the development of food products.

R. Rocha C, Teixeira JA, Pereira JAM. Green Extraction Techniques as Advanced Sample Preparation Approaches in Biological, Food, and Environmental Matrices: A Review

Green extraction techniques (GreETs) emerged in the last decade as greener and sustainable alternatives to classical sample preparation procedures aiming to improve the selectivity and sensitivity of analytical methods, simultaneously reducing the deleterious side effects of classical extraction techniques (CETs) for both the operator and the environment. The implementation of improved processes that overcome the main constraints of classical methods in terms of efficiency and ability to minimize or eliminate the use and generation of harmful substances will promote more efficient use of energy and resources in close association with the principles supporting the concept of green chemistry. The current review aims to update the state of the art of some cutting-edge GreETs developed and implemented in recent years focusing on the improvement of the main analytical features, practical aspects, and relevant applications in the biological, food, and environmental fields. Approaches to improve and accelerate the extraction efficiency and to lower solvent consumption, including sorbent-based techniques, such as solid-phase microextraction (SPME) and fabric-phase sorbent extraction (FPSE), and solvent-based techniques (μQuEChERS; micro quick, easy, cheap, effective, rugged, and safe), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE), in addition to supercritical fluid extraction (SFE) and pressurized solvent extraction (PSE), are highlighted.

Effects of Geographic Region and Cultivar on Fatty Acid Profile and Thermal Stability of Zanthoxylum bungeanum Seed Oil

Fatty acid profile and thermal stability of 7 varieties zanthoxylum bungeanum (GZF, GDJ, CJJ, SHY, SMN, SJY, GTS) seed oils (ZBO) were studied. Fatty acid profile, thermal stability were determined using gas chromatography equipped with flame ionization detector (GC-FID) and thermogravimetry analysis (TGA), respectively. Chemical properties, total phenolics and antioxidant activities of ZBO were determined as well. Palmitoleic acid and oleic acid (OA) were the dominant fatty acids, the ratio of ω-6/ω-3 polyunsaturated fatty acids (PUFA) of ZBO ranged from 0.66 ± 0.01 to 1.17 ± 0.01, seven varieties ZBO showed a higher thermal stability, with the 50% mass loss temperature ranged from 397.35 ± 4.02°C to 412.50 ± 2.35°C, GZF seed oil showed a balance fatty acid profile, the ratio of ω-6/ω-3 PUFA was 0.90 ± 0.01, GDJ seed oil showed a higher thermal stability, which the 50% mass loss temperature was 412.50 ± 2.35°C. These results suggested that fatty acid profile and thermal stability of ZBO were affected by cultivars and geographic region, and it may serve as a functional dietary oil.

Non-thermal Technologies for Food Processing

Food is subjected to various thermal treatments during processes to enhance its shelf-life. But these thermal treatments may result in deterioration of the nutritional and sensory qualities of food. With the change in the lifestyle of people around the globe, their food needs have changed as well. Today's consumer demand is for clean and safe food without compromising the nutritional and sensory qualities of food. This directed the attention of food professionals toward the development of non-thermal technologies that are green, safe, and environment-friendly. In non-thermal processing, food is processed at near room temperature, so there is no damage to food because heat-sensitive nutritious materials are intact in the food, contrary to thermal processing of food. These non-thermal technologies can be utilized for treating all kinds of food like fruits, vegetables, pulses, spices, meat, fish, etc. Non-thermal technologies have emerged largely in the last few decades in food sector.