Spray-drying encapsulation of microwave-assisted extracted polyphenols from Moringa oleifera: Influence of tragacanth, locust bean, and carboxymethyl-cellulose formulations

Composition and distribution of phenolic compounds of optimized bilberry microcapsules using wood hemicelluloses as protecting materials

Bilberry anthocyanins, known for their antioxidant and functional properties, are highly sensitive to processing conditions, which limits their applications in the food and nutraceutical industries. In this study, we systematically optimized the encapsulation efficiency (EE) of spray-dried bilberry anthocyanins using wood-derived hemicelluloses-galactoglucomannans (GGM) and glucuronoxylans (GX)-as protective materials. We evaluated the effects of spray-drying parameters, including inlet/outlet air temperatures and hemicellulose concentrations, to understand their impact on anthocyanin retention. The results showed that increasing the inlet temperature (140-170 °C) improved EE by approximately 20 %, with GGM achieving a higher EE (86 %) compared to GX (81 %) under optimal conditions. Chromatographic analysis confirmed a 100 % recovery of individual anthocyanins, while confocal laser scanning microscopy demonstrated their homogeneous distribution within the microcapsules, ensuring product quality. Additionally, the microcapsules exhibited a spherical morphology with minimal surface anthocyanin distribution, enhancing their stability against environmental stressors. Raman spectroscopy provided further evidence of anthocyanin-hemicellulose interactions, assumingly non-covalent binding mechanisms such as hydrogen bonding and hydrophobic interactions. These findings advance knowledge on process optimization for anthocyanin microencapsulation using hemicelluloses as protective materials and highlight advanced characterization techniques for food microcapsules.

The effect of different wall materials on the physicochemical properties and antioxidant activity of pomegranate peel polyphenols (PPP) microcapsules

Pomegranate peel polyphenols (PPP) are natural compounds known for their various biological activities; however, they are easily degraded by environmental conditions, leading to a reduction in their biological activity and health benefits. Therefore, improving the stability of PPP is a critical question that needs to be addressed. This study aimed to evaluate the efficacy of five common microcapsule wall materials-carboxymethyl cellulose sodium (CMCNa), sodium alginate (SA), gum Arabic (GA), beta-cyclodextrin (β-CD), and hydroxypropyl starch (HPS)-in encapsulating PPP to enhance its stability and antioxidant activity. Remarkable results indicated that β-CD-PPP exhibited the lowest moisture content (3.68 %), the highest thermal decomposition temperature (306.03 °C), and the strongest antioxidant activity (IC50 = 0.26 mg/mL for DPPH, 96.57 % for ABTS). In contrast, CMC-Na-PPP demonstrated the highest encapsulation efficiency (97.94 %) and the largest particle size (9895.63 nm). Moreover, the molecular docking results revealed that all wall materials formed intermolecular interactions with PPP components, with notable differences in binding energies; CMC-Na-PPP had the highest binding energy at -4.38 kcal/mol. These variations are attributed to factors such as molecular weight, free active groups, and spatial conformation of the wall materials. Therefore, in order to fully utilize the biological activity of PPP in food processing, microcapsules formed with β-CD as the wall material are more valuable compared to those formed with other wall materials.

Development of Cyclodextrin-Based Mono and Dual Encapsulated Powders by Spray Drying for Successful Preservation of Everlasting Flower Extract

The study aimed to develop encapsulation systems to maintain the preservation of everlasting (Helichrysum plicatum) flower extract polyphenols. Spray-dried encapsulates were formulated using β-cyclodextrin (BCD) and 2-hydroxypropyl-β-cyclodextrin (HPBCD) as supramolecular hosts, and their macromolecule mixtures with the conventional carriers, maltodextrin (MD) and whey protein (WP). The obtained microparticles were comparatively assessed regarding technological, physicochemical, and phytochemical properties. The highest yields were achieved by combining cyclodextrins with whey protein (73.96% for WP+BCD and 75.50% for WP+HPBCD compared to 62.48% of pure extract). The extract-carrier interactions and thermal stability were evaluated by FTIR and DSC analysis, suggesting successful entrapment within the carriers. Carriers reduced the particle diameter (3.99 to 4.86 μm compared to 6.49 μm of pure extract), classifying all encapsulates as microsystems. Carrier blends made the particle size distribution uniform, while SEM analysis revealed the production of more spherical and less aggregated particles. The HPBCD provided the highest encapsulation efficiency, with the highest content of detected aglycones and slightly lower values of their glycosylated forms. An analysis of the dual macromolecule encapsulation systems revealed the highest bioactive preservation potential for SHE+MD+BCD and SHE+WP+HPBCD. Overall, macromolecule combinations of cyclodextrins and conventional biopolymers in the spray-drying process can enhance the functional properties of H. plicatum extract.

In Vitro and In Silico Anti-Glioblastoma Activity of Hydroalcoholic Extracts of Artemisia annua L. and Artemisia vulgaris L

Glioblastoma, the most aggressive and challenging brain tumor, is a key focus in neuro-oncology due to its rapid growth and poor prognosis. The C6 glioma cell line is often used as a glioblastoma model due to its close simulation of human glioma characteristics, including rapid expansion and invasiveness. Alongside, herbal medicine, particularly Artemisia spp., is gaining attention for its anticancer potential, offering mechanisms like apoptosis induction, cell cycle arrest, and the inhibition of angiogenesis. In this study, we optimized extraction conditions of polyphenols from Artemisia annua L. and Artemisia vulgaris L. herbs and investigated their anticancer effects in silico and in vitro. Molecular docking of the main phenolic compounds of A. annua and A. vulgaris and potential target proteins, including programmed cell death (apoptosis) pathway proteins proapoptotic Bax (PDB ID 6EB6), anti-apoptotic Bcl-2 (PDB ID G5M), and the necroptosis pathway protein (PDB ID 7MON), mixed lineage kinase domain-like protein (MLKL), in complex with receptor-interacting serine/threonine-protein kinase 3 (RIPK3), revealed the high probability of their interactions, highlighting the possible influence of chlorogenic acid in modulating necroptosis processes. The cell viability of rat C6 glioma cell line was assessed using a nuclear fluorescent double-staining assay with Hoechst 33342 and propidium iodide. The extracts from A. annua and A. vulgaris have demonstrated anticancer activity in the glioblastoma model, with the synergistic effects of their combined compounds surpassing the efficacy of any single compound. Our results suggest the potential of these extracts as a basis for developing more effective glioblastoma treatments, emphasizing the importance of further research into their mechanisms of action and therapeutic applications.

UV blocking edible films based on corn starch/moringa gum incorporated with pine cone extract for sustainable food packaging

Corn starch (CS) is a good alternative to synthetic polymers due to its sustainability; nevertheless, because of its weak tensile strength, the matrix requires another polymer. Therefore, 0.5 % (w/v) moringa gum (MG) was added. The purpose of this study was to assess how pine cone extract (PCE) affected the physiochemical and mechanical properties of corn starch and moringa gum (CS/MG) films and their use as UV-blocking composites. The findings suggest that the PCE improved the elongation at break from 3.27 % to 35.2 % while greatly reducing the tensile strength. The hydrogen bonding between CS/MG and PCE was visible in the FTIR spectra. The XRD graph indicated that the films were amorphous. In comparison to CS/MG films, PCE-incorporated edible films demonstrated significant UV-blocking ability indicating their potential as sustainable packaging material for light-sensitive food products.

A Novel Approach to Serving Plant-Based Confectionery-The Employment of Spray Drying in the Production of Carboxymethyl Cellulose-Based Delivery Systems Enriched with Teucrium montanum L. Extract

In this study, spray drying was used as a technological solution for the valorization of Teucrium montanum extract into carboxymethyl cellulose-based delivery systems (CMC), individually or in combination with collagen, guar gum, gum arabic, and kappa-carrageenan. The results showed that the process yield and morphological properties were positively influenced by the introduction of CMC binary blends. The employment of CMC resulted in a high encapsulation efficiency (77-96%) for all phenylethanoid glycosides (PGs) analyzed. Due to the low wettability of the microparticles, a relatively gradual in vitro release of the PGs was achieved. Infusion of the filling with hydrophilic T. montanum extract encapsulated in microparticles with high hydrophobic surface area proved to be a practical route for significant confectionery fortification (5-9 mg PGs per dw serving), ensuring prolonged interaction between the food matrix used and the extract under simulated gastrointestinal conditions. Based on sensory evaluation, the introduction of kudzu starch into the jelly matrix has shown a texture-modifying potential.

Multifunctional Pomegranate Peel Microparticles with Health-Promoting Effects for the Sustainable Development of Novel Nutraceuticals and Pharmaceuticals

Recovering the bioactive components from pomegranate peel (PP) in the fruit-processing industry has attracted great attention in terms of minimizing the waste burden, as well as providing a new source of a multitude of functional compounds. The present study aimed to develop a feasible microencapsulation process of PP extract by using pectin and a pectin/2-hydroxypropyl-β-cyclodextrin (HP-β-CD) blend as coating materials. Microsized powders obtained by a spray drying technique were examined in terms of technological characteristics, exhibiting high powder yield and desirable moisture content, flowability, and cohesive properties. Assuming that the interactions with the used biopolymers occur on the surface hydrophobic domain, their presence significantly improved the thermal stability of the microencapsulated powders up to 200 °C. The health-promoting effects of PP have been associated with its high content in ellagitannins, particularly punicalagin. The obtained PP powders exhibited strong antioxidant and hypoglycemic potential, while an antimicrobial assay revealed their potent activity against Gram-positive bacteria. Additionally, an in vitro release study suggested that the used biopolymers can modify the release of target bioactive compounds, thus establishing a basis for developing an oral-controlled release system. Altogether, biowaste valorization from PP by the production of effective multifunctional microsized powders represents a sustainable way to obtain novel nutraceuticals and/or pharmaceuticals.

Development of basil seed mucilage (a heteropolysaccharide) - Polyvinyl alcohol biopolymers incorporating zinc oxide nanoparticles

The effect of zinc oxide nanoparticles (ZnONPs) on various properties of basil seed mucilage (a heteropolysaccharide)-polyvinyl alcohol (BSM-PVA) films was investigated. Increasing concentration of ZnONPs in BSM-PVA films reduced moisture content (from 24.73 to 17.09 %), water solubility (from 36.36 to 27.65 %), water vapor permeability (from 4.66 × 10-7 to 2.55 × 10-7 g·m/m2·Pa·h), oxygen permeability (from 2.96 to 2.13 cm3 μm/m2 d kPa), and elongation at break (from 40.34 to 29.44 %), and increased ultimate tensile strength (from 16.81 to 21.48 MPa). Color and light transmission were affected by ZnONPs concentrations. The lack of formation of new peaks, along with the displacement of peaks, indicated the formation of hydrogen bonds between ZnONPs and the film matrix. Dynamic mechanical-thermal analysis showed that storage modulus and glass transition temperature increased with the concentration of ZnONPs. Scanning electron microscopy images illustrated that the addition of ZnONPs improved film integrity. X-ray diffraction pattern showed that the crystal shape of nanoparticles was preserved in the film matrix. Films containing ZnONPs showed good antibacterial activity against Staphylococcus aureus (reductions ≥ 3 log CFU/cm2) and Escherichia coli (reductions ≥ 4 log CFU/cm2). Films containing ZnONPs also showed a suitable antifungal activity during the storage of wheat bread.

Construction, characterization and application of locust bean gum/Phyllanthus reticulatus anthocyanin - based plasmonic silver nanocomposite for sensitive detection of ferrous ions

Iron is a transition metal of tremendous eco-physiological significance. This work aimed at constructing a simple plasmonic Ag-nanocomposite (LBG/PRAg-NC) based on locust bean gum and Phyllanthus reticulatus anthocyanin in a sustainable manner for the optical detection of ferrous ions (Fe²⁺) in aqueous solution. LBG/PRAg-NC was prepared via a green chemistry route and thoroughly characterized for its physico-chemical and plasmonic attributes. Successful synthesis of LBG/PRAg-NC under room temperature with Phyllanthus reticulatus anthocyanin as reductant and locust bean gum as stabilizer was accomplished within 15 min. LBG/PRAg-NC exhibited small size (∼8.04 nm), spherically shaped nanosilver, with good colloidal dispersion, stability and prominent SPR absorption peak at 420 nm. XPS analysis revealed the existence of both Ag⁰ and Ag ⁺ species embedded in the biopolymer support. Furthermore, LBG/PRAg-NC was highly selective for Fe²⁺ as opposed to other interferents including Fe³⁺. The presence of Fe²⁺ engendered a redox oxidation of the analyte by the Ag⁺ species, prompting a rapid, concentration dependent increase in color and SPR absorption band intensity of LBG/PRAg-NC colloidal solution. In aqueous solution, the probe displayed a good linear range for Fe²⁺ (0.1-100 μM), and a low detection limit (LOD of 0.38 μM). The obtained detection limit is much lower than the guideline limit of Fe²⁺ content in drinking water, ∼5 μM. Additionally, the probe was successfully applied in determination of Fe²⁺ in aqueous solutions of apple juice, iron supplement tablet, and tap water, with commendable analytical performances. Therefore, our research findings demonstrate a facile, efficacious, cost-effective, and eco-friendly approach for the sustainable synthesis of plasmonic Ag-nanocomposites based solely on locust bean gum and Phyllanthus reticulatus anthocyanin. Importantly, these results validate the capacity of plasmonic Ag-nanocomposite constructed via green chemistry route as a simple, rapid, and selective probe for effective monitoring of trace amounts of Fe²⁺ in aqueous environment.

Microencapsulation of Propolis and Honey Using Mixtures of Maltodextrin/Tara Gum and Modified Native Potato Starch/Tara Gum

Ethanolic extracts of propolis and bee honey contain substances beneficial to human health. Mixtures of wall materials were compared in spray-drying microencapsulation of ethanolic extracts of propolis and bee honey rich in bioactive compounds. Maltodextrin and tara gum were used to obtain microencapsulates A, and modified native potato starch and tara gum were used for microencapsulates B. High values of phenolic compounds, flavonoids, and antioxidant capacity were obtained in microcapsules A and B, and the results obtained in terms of encapsulation efficiency, yield, hygroscopicity, solubility, moisture, Aw, bulk density, and color were typical of the spray-drying process. On the other hand, spherical and elliptical microparticles of sizes between 7.83 and 53.7 µm with light and medium stability were observed. Thermogravimetric properties were similar in both microencapsulates; total organic carbon, SEM-EDS, and FTIR analyses corroborated the encapsulation. X-ray diffractogram exhibited amorphous structures, and the release kinetics of phenolic compounds presented high values from 8.13 to 12.58 mg GAE/g between 7 and 13 h. Finally, modified potato starch is a better encapsulant than maltodextrin because it has better core protection and controlled release of the encapsulated bioactive compounds.

Microencapsulates of Blue Maize Polyphenolics as a Promising Ingredient in the Food and Pharmaceutical Industry: Characterization, Antioxidant Properties, and In Vitro-Simulated Digestion

An anthocyanin-rich blue maize waste product was used for anthocyanin extraction. To preserve bioactive phenolic compounds, a spray-drying technique was employed using conventional wall material maltodextrin (MD), with novel one, hydroxypropyl-β-cyclodextrin (HPBCD). The obtained spray-dried maize extract (SME) and microencapsulates were analyzed based on physicochemical powder properties, chemical analysis, antioxidant activity, and digestibility. The examined microencapsulates demonstrated good powder properties, exhibited a high powder yield (up to 83%), and had a low moisture content (less than 5%). HPBCD and MD + HPBCD combinations demonstrated superior powder properties in the terms of decreasing the time necessary for rehydration (133.25 and 153.8 s, respectively). The mean average particle diameter ranged from 4.72 to 21.33 µm. DSC analyses signified high powder thermal stability, around 200 °C, related to the increasing preservation with biopolymer addition. The total phenolic and anthocyanin compounds ranged from 30,622 to 32,211 mg CE/kg (CE-catechin equivalents) and from 9642 to 12,182 mg CGE/kg (CGE-cyanidin 3-glucoside equivalents), respectively, associated with good bioactive compound protection. Microencapsulates with both carriers (15% MD and 15% HPBCD) had the highest digestibility (73.63%). Our results indicated that the microencapsulates created with the active ingredient and the wall materials (MD and HPBCD) could protect phenolic compounds/anthocyanins against ABTS radicals (63.53 and 62.47 mmol Trolox Eq/kg, respectively).

Reducing disulfide bonds as a robust strategy to facilitate the self-assembly of cod protein fabricating potential active ingredients-nanocarrier

In this study, a novel method was developed to encapsulate hydrophobic compounds by self-assembly of cod protein (CP) triggered by breaking disulfide bonds. Curcumin (Cur), a representative lipid-soluble polyphenol, was selected as a model to evaluate the potential of CP nanoparticles as novel and accessible nanocarriers. Results showed that the protein structure gradually unfolded with increasing dithiothreitol (DTT) concentration, indicating that S-S cleavage was conducive to forming a looser structure. The resultant unfolded CP exposed more hydrophobic sites, facilitating its interaction with hydrophobic compounds. The encapsulation efficiency (EE) of formed CP-Cur nanoparticles was relatively high, reaching 99.09%, 98.8%, and 89.77% when the mass ratios of CP to Cur were 20:1, 10:1, and 5:1 (w/v), respectively. The hydrophobic interaction, weak van der Waals, and hydrogen bond were the forces contributing to the formation of CP-Cur nanoparticles, whereas the hydrophobic interaction played a crucial role. The CP-Cur complex exhibited increased stability and a homogeneous-stable structural phase. Thus, this research not only proposed a novel and simple encapsulation method of hydrophobic bioactive compounds but also provided a theoretical reference for the application of reductants in food or pharmacy system.

Wood Hemicelluloses as Innovative Wall Materials for Spray-Dried Microencapsulation of Berry Juice: Part 1—Effect of Homogenization Techniques on their Feed Solution Properties

The use of wood hemicelluloses, including galactoglucomannans (GGM) and glucuronoxylans (GX), in spray-dried microencapsulation of bioactive compounds has not been reported. Our study aims to investigate the benefits of spray-dried GGM and GX powders (sGGM and sGX) along with the effects of homogenization techniques (magnetic stirring, ultrasonication, and a combination of UltraTurrax homogenization and microfluidization) on the physicochemical properties of feed solutions (10–20%, w/w). Feed solutions of bilberry juice with sGGM, sGX, and mixtures of either sGGM or sGX with methylcellulose (MC) or carboxymethylcellulose (CMC) were examined to produce highly stable feed solutions for spray-dried microencapsulation. The effects of ultrasonication amplitudes (30–80%) on the viscosity and particle size distribution of sGGM feed solutions were more profound than observed in their sGX counterparts. Unlike sGX feed solutions, sGGM feed solutions homogenized by ultrasonication and microfluidization formed a gel-like structure. Microfluidization also caused a loss of total anthocyanin content (TAC) of the feed solutions. Magnetic stirring resulted in no gel formation and in the lowest viscosity of the feed solutions; hence, it is an effective method for preparing hemicellulose feed solutions. sGGM and sGX powders have high heat stability with melting temperatures of 170–180 °C. The sGGM + CMC combination was more stable over 1 week of storage than the sGGM and sGX feed solutions. Storing the feed solutions reduced TAC and increased sGGM viscosity. Our results indicated that GGM and GX have high potential for use as wall materials in the spray-dried microencapsulation of bioactive compounds.

A Comprehensive Review of Moringa oleifera Bioactive Compounds-Cytotoxicity Evaluation and Their Encapsulation

Moringa oleifera Lam. has gained a lot of attention due to its potential use as a functional food not only for human health but also for animal health. Its bioactive molecules include carbohydrates, phenolic compounds, carotenoids, fatty acids, essential amino acids, and functional peptides. Despite significant efforts to isolate and characterize bioactive metabolites with health functions, few effective metabolites are accessible. The current review aims to describe the main processes for extracting and encapsulating bioactive compounds from Moringa oleifera for potential impact on food science and public health. Researchers have shown that different extraction techniques significantly impact the Moringa polysaccharides' molecular structure and biological activity. Encapsulation has been proposed to reduce oxidative stability and entrap active agents within a carrier material to deliver bioactive molecules into foods. Currently, polysaccharides and proteins, followed by lipids, are used for material encapsulation. Recent techniques include spray drying, cross-linking gelation, freeze-drying, nanoencapsulation, electrospinning, and electrospraying. Moreover, these encapsulations can overlap concerns regarding the Moringa oleifera compounds' cytotoxicity. Future studies should prioritize the effect of new encapsulation materials on Moringa extract and develop new techniques that consider both encapsulation cost and efficiency.

Obtaining and Characterizing Andean Multi-Floral Propolis Nanoencapsulates in Polymeric Matrices

Propolis is a substance with significant anti-inflammatory, anticancer, and antiviral activity, which could be used more efficiently at the nano level as an additive in the food industry. The aim was to obtain and characterize nanoencapsulated multi-floral propolis from the agro-ecological region of Apurimac, Peru. For nanoencapsulation, 5% ethanolic extracts propolis with 0.3% gum arabic and 30% maltodextrin were prepared. Then, the mixtures were dried by nano spraying at 120 °C using the smallest nebulizer. The flavonoid content was between 1.81 and 6.66 mg quercetin/g, the phenolic compounds were between 1.76 and 6.13 mg GAE/g, and a high antioxidant capacity was observed. The results of moisture, water activity, bulk density, color, hygroscopicity, solubility, yield, and encapsulation efficiency were typical of the nano spray drying process. The total organic carbon content was around 24%, heterogeneous spherical particles were observed at nanometer level (between 11.1 and 562.6 nm), with different behaviors in colloidal solution, the thermal gravimetric properties were similar in all the encapsulates, the FTIR and EDS analysis confirmed the encapsulation and the X-ray diffraction showed amorphous characteristics in the obtained material; stability and phenolic compound release studies indicated high values of 8.25–12.50 mg GAE/g between 8 and 12 h, the principal component analysis confirmed that the flora, altitude, and climate of the propolis location influenced the content of bioactive compounds, antioxidant capacity, and other properties studied. The nanoencapsulate from the district of Huancaray was the one with the best results, allowing its future use as a natural ingredient in functional foods. Nevertheless, technological, sensory, and economic studies should still be carried out.

Microencapsulation of Erythrocytes Extracted from Cavia porcellus Blood in Matrices of Tara Gum and Native Potato Starch

Ferropenic anemy is the leading iron deficiency disease in the world. The aim was to encapsulate erythrocytes extracted from the blood of Cavia porcellus, in matrices of tara gum and native potato starch. For microencapsulation, solutions were prepared with 20% erythrocytes; and encapsulants at 5, 10, and 20%. The mixtures were spray-dried at 120 and 140 °C. The iron content in the erythrocytes was 3.30 mg/g and between 2.32 and 2.05 mg/g for the encapsulates (p < 0.05). The yield of the treatments varied between 47.84 and 58.73%. The moisture, water activity, and bulk density were influenced by the temperature and proportion of encapsulants. The total organic carbon in the atomized samples was around 14%. The particles had diverse reddish tonalities, which were heterogeneous in their form and size; openings on their surface were also observed by SEM. The particle size was at the nanometer level, and the zeta potential (ζ) indicated a tendency to agglomerate and precipitation the solutions. The presence of iron was observed on the surface of the atomized by SEM-EDX, and FTIR confirmed the encapsulation due to the presence of the chemical groups OH, C-O, C-H, and N-H in the atomized. On the other hand, high percentages of iron release in vitro were obtained between 88.45 and 94.71%. The treatment with the lowest proportion of encapsulants performed at 140 °C obtained the best results and could potentially be used to fortify different functional foods.

Covalent modification of zein with polyphenols: A feasible strategy to improve antioxidant activity and solubility

Covalent modification of protein with polyphenols is an attractive research topic, since it is an effective way to improve the properties and broaden the applications of protein. However, the majority of prolamin-polyphenol reactions were carried out in alcohol aqueous solution, and this study aimed to investigate the covalent interaction of zein and polyphenols in water. Chlorogenic acid (CGA), gallic acid (GA), and caffeic acid (CA) were used as polyphenol models. The grafting ratio revealed that zein interacted more strongly with CGA and CA than with GA, which was probably due to the larger molecular weight of CGA and the hydroxycinnamic acid structure of CA. Afterward, the differences in structural and functional properties between control zein and zein-polyphenol complexes were compared. Covalent interaction with polyphenols induced great changes in the morphology and secondary structure of zein. Compared with control zein and non-covalent complexes, covalent zein-polyphenol complexes exhibited better solubility, antioxidant activity, and thermal stability. PRACTICAL APPLICATION: Covalent modification of zein with polyphenols in water is a simple and efficient method, which can ameliorate the antioxidant activity as well as the hydrophilicity of zein and improve its application value. The findings of this research carry important implications for using zein-polyphenol complexes as novel food additives, or to design more efficient delivery systems.

Polysaccharides as wall materials in spray-dried microencapsulation of bioactive compounds: Physicochemical properties and characterization

Natural bioactive compounds (BCs) are types of chemicals found in plants and certain foods that promote good health, however they are sensitive to processing and environmental conditions. Microencapsulation by spray drying is a widely used and cost-effective approach to create a coating layer to surround and protect BCs and control their release, enabling the production of high functional products/ingredients with extended shelf life. In this process, wall materials determine protection efficiency, and physical properties, bioavailability, and storage stability of microencapsulated products. Therefore, an understanding of physicochemical properties of wall materials is essential for the successful and effective spray-dried microencapsulation process. Typically, polysaccharide-based wall materials are generated from more sustainable sources and have a wider range of physicochemical properties and applications compared to their protein-based counterparts. In this review, we highlight the essential physicochemical properties of polysaccharide-based wall materials for spray-dried microencapsulation of BCs including solubility, thermal stability, and emulsifying properties, rheological and film forming properties. We provide further insight into possibilities for the chemical structure modification of native wall materials and their controlled release behaviors. Finally, we summarize the most recent studies involving polysaccharide biopolymers as wall materials and/or emulsifiers in spray-dried microencapsulation of BCs.

Effects of Malic Acid and Sucrose on the Fermentation Parameters, CNCPS Nitrogen Fractions, and Bacterial Community of Moringa oleifera Leaves Silage

The present study investigated the effects of malic acid, sucrose, and their mixture on the fermentation parameters, Cornell Net Carbohydrate and Protein System (CNCPS) nitrogen fractions, and bacterial community of Moringa oleifera leaves (MOL) silages. The trial was divided into four treatments and labeled as CON (control group) and MLA, SUC, and MIX (respectively denoting the addition of 1% malic acid, 1% sucrose, and 1% malic acid + 1% sucrose to the fresh weight basis). The silage packages were opened on the 2nd, 5th, 10th, 20th, and 40th days of ensiling for subsequent determination. Malic acid and sucrose increased the lactic acid content (p < 0.05) and pH value, and the acetic acid contents of MLA and MIX were lower than those in CON (p < 0.05). Compared with sucrose, malic acid had a better capacity to preserve nutrients and inhibit proteolysis, and thus exerted better effects on the CNCPS nitrogen fractions. The results of 16S rRNA showed that the dominant phyla were Firmicutes and Proteobacteria and that the dominant genera were Lactobacillus and Weissella. With the application of silage additives and the processing of fermentation, there was a remarkable change in the composition and function of the bacterial community. The variation of the fermentation parameters and CNCPS nitrogen fractions in the MOL silages caused by malic acid and sucrose might be attributed to the dynamic and dramatic changes of the bacterial community.