Discrimination of pencil markings on paper using elemental analysis: An initial investigation

Fabrication of Binder-Free Pencil-Trace Electrode for Lithium-Ion Battery: Simplicity and High Performance

A binder-free and solvent-free pencil-trace electrode with intercalated clay particles (mainly SiO2) is prepared via a simple pencil-drawing process on grinded Cu substrate with rough surface and evaluated as an anode material for lithium-ion battery. The pencil-trace electrode exhibits a high reversible capacity of 672 mA h g(-1) at 100 mA g(-1) after 100 cycles, which can be attributed to the unique multilayered graphene particles with lateral size of few micrometers and the formation of LixSi alloys generated by interaction between Li(+) and an active Si produced in the electrochemical reduction of nano-SiO2 in the clay particles between the multilayered graphene particles. The multilayered graphene obtained by this process consists of 1 up to 20 and occasionally up to 50 sheets and thus can not only help accommodating the volume change and alleviating the structural strain during Li ion insertion and extraction but also allow rapid access of Li ions during charge-discharge cycling. Drawing with a pencil on grinded Cu substrate is not only very simple but also cost-effective and highly scalable, easily establishing graphitic circuitry through a solvent-free and binder-free approach.

Bayesian Integration and Classification of Composition C-4 Plastic Explosives Based on Time-of-Flight-Secondary Ion Mass Spectrometry and Laser Ablation-Inductively Coupled Plasma Mass Spectrometry

Time-of-flight-secondary ion mass spectrometry (TOF-SIMS) and laser ablation-inductively coupled plasma mass spectrometry (LA-ICPMS) were used for characterization and identification of unique signatures from a series of 18 Composition C-4 plastic explosives. The samples were obtained from various commercial and military sources around the country. Positive and negative ion TOF-SIMS data were acquired directly from the C-4 residue on Si surfaces, where the positive ion mass spectra obtained were consistent with the major composition of organic additives, and the negative ion mass spectra were more consistent with explosive content in the C-4 samples. Each series of mass spectra was subjected to partial least squares-discriminant analysis (PLS-DA), a multivariate statistical analysis approach which serves to first find the areas of maximum variance within different classes of C-4 and subsequently to classify unknown samples based on correlations between the unknown data set and the original data set (often referred to as a training data set). This method was able to successfully classify test samples of C-4, though with a limited degree of certainty. The classification accuracy of the method was further improved by integrating the positive and negative ion data using a Bayesian approach. The TOF-SIMS data was combined with a second analytical method, LA-ICPMS, which was used to analyze elemental signatures in the C-4. The integrated data were able to classify test samples with a high degree of certainty. Results indicate that this Bayesian integrated approach constitutes a robust classification method that should be employable even in dirty samples collected in the field.

Pencil drawn paper based supercapacitors

A comprehensive analysis of the performance of pencil drawn electrodes, demonstrating a new and innovative process for the characterisation of capacitive materials.

Analysis of questioned documents: a review

During the last years (2000-2014), many publications concerning the forensic analysis of questioned documents have been published, and new techniques and methodologies are nowadays employed to overcome forensic caseworks. This article reviews a comprehensive collection of the works focused on this issue, including dating studies, the analysis of inks from pens and printers, the analysis of paper, the analysis of other samples related to questioned documents and studies on intersecting lines. These sections highlight the most relevant analytical studies by a wide range of analytical techniques. Separation and spectrometric techniques are critically discussed and compared, emphasizing the advantages and disadvantages of each one. Finally, concluding remarks on the research published are included.

Pencil-on-paper: electronic devices

Paper based electronics have been rapidly growing in recent years. Drawing with a pencil on paper is perhaps the simplest and easiest way of establishing graphitic circuitry in a solvent-free manner, which in the post-graphene years, has attracted an unusual interest. Here in this focus article, we highlight the recent efforts in the literature employing pencil drawings in various ways including sensors, microfluidics, energy storage and microanalytical devices. Even active devices such as piezo and chemiresistive devices as well as field effect transistors have been realised by utilizing pencil-traces. Pencil-on-paper may offer a viable route for developing lab-on-paper applications through suitable integration of the passive and active roles of the pencil-trace.

Hair analysis as a biomonitor for toxicology, disease and health status

Hair analysis receives a large amount of academic and commercial interest for wide-ranging applications. However, in many instances, especially for elemental or 'mineral' analysis, the degree of success of analytical interpretation has been quite minimal with respect to the extent of such endeavors. In this critical review we address the questions surrounding hair analysis with specific intent of discovering what hair concentrations can actually relate to in a biogenic sense. This is done from a chemistry perspective to explain why and how elements are incorporated into hair and their meaning. This includes an overview of variables attributed to altering hair concentrations, such as age, gender, melanin content, and other less reported factors. Hair elemental concentrations are reviewed with regard to morbidity, with specific examples of disease related effects summarized. The application of hair analysis for epidemiology and etiology studies is enforced. A section is dedicated specifically to the area of population studies with regards to mercury, which highlights how endogenous and exogenous incorporation relies on species dependant metabolism and metabolic products. Many of the considerations are relevant to other areas of interest in hair analysis, such as for drug and isotopic analysis. Inclusion of a table of elemental concentrations in hair should act as a valuable reference (298 references).

Detecting the presence of denatured human serum albumin in an adsorbed protein monolayer using TOF-SIMS

We demonstrate the application of time-of-flight secondary ion mass spectrometry (TOF-SIMS) in conjunction with multivariate statistics to differentiate trace levels of denatured proteins in adsorbed monolayers; specifically, human serum albumin (HSA) on oxidized silicon substrates. Subtle differences in protein conformation due to thermal denaturation of HSA, unable to be determined by dynamic light scattering nor circular dichroism, were differentiated by TOF-SIMS. The fragmentation pattern is highly sensitive to protein conformation, allowing assessment of relative amounts of proteins in mixtures and quantifying amounts of denatured protein in a sample. Discussion is presented on ascribing orientation and conformational differences between samples based upon TOF-SIMS spectra. This has implications for detecting denatured protein in biotechnology and medical applications.

ToF-SIMS as a new method to determine the contact angle of mineral surfaces

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) has been used as a technique to correlate the surface chemistry of chalcopyrite particles with their contact angle. Three particle sizes (20-38, 75-105, and 150-210 microm) were used, covering a range of contact angles between 20 and 90 degrees. Multivariate statistical techniques were applied to the ToF-SIMS data in order to identify structure in the data and the surface species contributing the most to surface chemistry and hence the hydrophobicity variation. A method to calculate the contact angle of chalcopyrite by ToF-SIMS surface analysis has been developed using only information from three secondary ions: oxygen, sulfur, and a thiol collector fragment. This approach is capable of determining the surface chemistry contribution to the contact angle of individual mineral particles and the distribution of contact angles within a large ensemble of particles. Further measurements verified that the methodology can also be applied to flat surfaces, enabling rapid surface chemistry-hydrophobicity correlations to be made on a wide range of mineral and material systems.

Use of TOF-SIMS to study adsorption and loading behavior of methylene blue and papain in a nano-porous silicon layer

TOF-SIMS was applied to study the cross-sectional distribution of methylene blue and papain in porous silicon layers. Elemental and molecular information were used to study their distributions in the porous region and the chemistry of their adsorption. Methylene blue (MW = 284 Da) penetrated to the base to the pores. Positive ions (SiCH(3)(+)) suggest methylene blue binds to the substrate via its methyl groups. Negative fragments (SiOSH(3)(-) and SiO(2)SCH(-)) also suggested chemisorption via O bridging of the substrate Si and methylene blue S. The larger Papain molecule (23,406 Da) distributed itself in a similar manner to methylene blue demonstrating larger molecules can be effectively incorporated into such pore structures.