Effectiveness of early versus delayed motion in patients with distal radius fracture treated with volar locking plate: A systematic review and meta-analysis

Integrated Compression Screw Versus Unicortical Locking Screw for Fixing the Dorsal Critical Corner in Distal Radius Fractures: A Biomechanical Study

PURPOSE

Although studies have demonstrated that locked screws with a length of 75% of the radius width are sufficient for the treatment of extra-articular fractures of the distal radius, the application of this principle to intra-articular fractures is less well-understood. This study aimed to evaluate the biomechanical properties of different types of volar plate fixation constructs for the treatment of distal radius fractures in the presence of a dorsal critical corner fragment.

METHODS

A dorsal critical corner fracture was created in 18 synthetic distal radius models. The fragment was stabilized with one of three constructs: a posteroanterior integrated compression screw (group 1) or volar locking screws with a length of 90% or 75% of the volar/dorsal width of the radius (groups 2 and 3, respectively). For the biomechanical evaluation, a load was applied to the lunate facet. Fixation stiffness and loads to produce clinical and catastrophic failures were compared among the groups.

RESULTS

The stiffness (N/mm) was 67.8 (SD, 14.7), 64.9 (SD, 8.63), and 65.8 (SD, 36.02) for groups 1, 2, and 3, respectively. The load required to generate a catastrophic displacement was 532.9 (SD, 142.32), 307.4 (SD, 101.51), and 230.8 N (SD, 77.68) for groups 1, 2, and 3, respectively. The load required to produce a 2-mm translation of the fixed fragment was 127.9 N (SD, 28.8) for group 1, 119.7 (SD, 11.78) for group 2, and 127.6 N (SD, 46.2) for group 3.

CONCLUSIONS

Significantly greater load is required for catastrophic failure after fixation of a dorsal critical corner fracture with an integrated compression screw; however, it provides similar stiffness and load to failure for 2 mm of translation.

CLINICAL RELEVANCE

For the treatment of intra-articular distal radius fractures with dorsal critical corner fragments, an integrated compression screw may be considered for rigid fixation of the fragment to support early return to daily activities.

Early Daily Activity: Development and description of an occupation-based intervention for surgically repaired distal radius Fractures

OBJECTIVE

To describe the theoretical development and structure of an occupation-based intervention for people with a surgically repaired distal radius fracture.

INTERVENTION DEVELOPMENT AND RATIONALE

The Early Daily Activity (EDA) intervention uses the performance of strategically selected daily activities as the primary rehabilitative strategy. Occupation-based interventions are recommended for hand injury rehabilitation but are often poorly described and lack explicit theoretical underpinnings. The EDA-intervention was developed from exploratory research that informed the theory and structure. The theoretical principles are that daily activity performance is (i) safe within defined parameters (ii) appropriately self-determined (iii) produces high ranges and amounts of therapeutic movement, and (iv) builds psychosocial competencies.

INTERVENTION DESCRIPTION

The EDA-intervention is designed to be commenced within 2 weeks of surgery. There are three key components. The first is activity-specific education to emphasise the safety, benefits, and therapeutic actions of activity performance. A set of parameters for defining safe activities is described to support education. The second component is patient-therapist collaboration to select a range of daily activities that provide a 'just-right' challenge. Collaboration occurs at regular intervals throughout the rehabilitation period to incrementally increase the challenge of activities. The third component is performance of activities at-home targeted at improving range of movement and function.

NEXT STEPS

The EDA-intervention can be used by hand therapists, but it has not yet undergone effectiveness evaluation. A planned study will explore clinician readiness to adopt the EDA-intervention, inform iterative changes to the protocol and the design of feasibility and effectiveness studies.

[Treatment reality of distal radius fractures in a center]

Distal radius fractures are the third most common type of fracture in Germany after fractures of the femoral neck and peritrochanteric femoral fractures. In 2019 a total of 72,087 cases were registered with an incidence of 106 cases per 100,000 inhabitants (81,570 fractures of the femoral neck, 73,785 peritrochanteric fractures). Many of these fractures are surgically treated also in this hospital but with controversial views on the optimal treatment. Against the background of the coronavirus disease 2019 (COVID-19) pandemic, disappearing personnel resources and the political pressure to form centers and a switch to outpatient treatment, the authors ask the question what the treatment reality in this hospital looks like and whether the general changes in the framework conditions also have an affect in this context. This is not a strictly scientific study but a stocktaking without any claims of completeness and the retrospective evaluation of a larger data pool with all its weaknesses. On the contrary, the data provide interesting aspects that are explained in detail in the individual sections.

An evaluation of wrist and forearm movement during purposeful activities and range of movement exercises after surgical repair of a distal radius fracture: A randomized crossover study

PURPOSE

Following surgical repair of distal radius fractures, range of movement (ROM) exercises are the primary approach for restoring movement during early rehabilitation. Specified purposeful activities can also be used, but the movement produced by activities is not well-understood. The study aimed to evaluate and compare movement during purposeful activity and ROM exercises METHODS: Thirty-five adults with a surgically repaired distal radius facture undertook two 10-minutes interventions: purposeful activity (PA) and active ROM exercises (AE), separated by a 60 minute washout, in random order. Data collection occurred during a single session on the same day. Electrogoniometry was used to measure time-accumulated position (TAP), a global metric of movement range and amount, maximum active end range, movement repetitions, excursions >75% of available ROM, and active time. Data were analyzed using linear mixed and generalized linear mixed regression models.

RESULTS

Purposeful activities selected were predominantly household or food preparation. TAP was significantly higher during AE than PA: -1878 [-2388, -1367], p ≤.001, for wrist extension/flexion. PA produced significantly greater movement repetitions for wrist extension/flexion and deviation, excursions beyond 75% of available ROM, and active time, than AE. During PA the wrist was extending/flexing a mean of 97% [92, 101], of the time, compared with 43% [40, 47], during AE. There were no significant differences in maximum end range for wrist extension between PA, 33.7° [29.8, 37.5] and AE, 34.5° [30.7, 38.4], or for ulnar deviation.

CONCLUSIONS

ROM exercises produced higher volumes of sustained joint position than purposeful activity but activities, selected for importance and challenge, produced significantly higher volumes of continuous, repetitious motion in equivalent ranges of movement as exercise repetitions. The study challenges therapists to consider the rehabilitative potential of movement produced by activity for restoring movement and function in the early postoperative weeks.

Factors influencing functioning after volar locking plate fixation of distal radius fractures: a scoping review of 148 studies

BACKGROUND AND PURPOSE

A better understanding of factors that influence functioning may improve the identification of patients with distal radius fractures (DRFs) who need hand therapy. The purpose of this scoping review was to provide a comprehensive overview of factors that have been evaluated for their influence on hand functioning following volar plate fixation of DRFs.

MATERIAL AND METHODS

6 databases were searched from 2005 to 2021 for publications regarding surgical treatment for a DRF with a volar locking plate. Included studies evaluated demographic, perioperative, and postoperative factors within the 6 weeks post-surgery for their influence on functioning at least 3 months post-surgery. Functioning was assessed with patient-reported outcome measures. The factors were categorized into themes and mapped to the International Classification of Functioning, Disability and Health (ICF).

RESULTS

148 studies were included. 708 factors were categorized into 39 themes (e.g. pain) and mapped to the ICF components. The themes were primarily mapped to "body functions and structures" (n = 26) and rarely to "activities and participation" (n = 5). Fracture type (n = 40), age (n = 38), and sex (n = 22) were the most frequently evaluated factors.

CONCLUSION

This scoping review identified an extensive number of factors evaluated within 6 weeks after surgery for their influence on functioning at least 3 months after volar plate fixation of a DRF and the existing research has primarily evaluated factors related to "body functions and structures," with limited focus on factors related to "activities and participation."

A Volar Locking Plate With Fossa Specific Fixation Provides Comparable Stability Between Articular and Nonarticular Cadaveric Models of Distal Radius Fracture

BACKGROUND

Distal radius fractures often present with a 3-part articular fragmentation pattern, with separation of the dorsal and volar lunate fossa. The column concept of distal radius fixation addresses the importance of stabilizing both the scaphoid fossa lateral column and the lunate fossa intermediate column. Recent evidence strengthens the value of immediate postoperative mobilization. Satisfactory outcomes following these protocols are predicated on volar locking plates (VLPs) providing adequate stability to the fracture repair. We hypothesize that a VLP which individually supports both lateral and intermediate distal radius columns may provide comparable stability between articular and non-articular cadaveric fracture models under parameters meant to simulate postoperative loading.

METHODS

Eleven cadaveric matched pair specimens were randomized to receive a simulated AO Type A2 non-articular distal radius fracture on one side with an AO Type C3 articular fracture on the contralateral side. Stiffness during cyclic loading was compared between fracture groups. A matched-paired Student t-test was used to determine statistical significance (P = .05).

RESULTS

There were no significant differences (P = .35) in stiffness between the articular models (mean 370.0 N/mm, +/-93.5) and the non-articular models (360.4 N/mm, +/-60.0) of distal radius fracture.

CONCLUSION

A VLP that individually supports the scaphoid and lunate fossa with fixed angle subchondral support may provide comparable fixation strength with resistance to displacement between articular and non-articular fracture patterns. The current results suggest that fossa-specific VLP fixation in articular fractures can maintain construct stability during postoperative loading.

Appropriately Matched Fixed-Angle Locking Plates Improve Stability in Volar Distal Radius Fixation

Purpose

Size options for volar locking plates may provide value for distal radius fixation. We compared excessively narrow plates with plates that were appropriately matched in width for fixation of an multifragmented distal radius fracture model.

Methods

Eighteen matched pairs (right and left wrists) of large, cadaveric male distal radii specimens, prepared with a simulated Arbeitsgemeinschaft für Osteosynthesefragen type C-3 distal radius fractures, were tested. One specimen from each matched pair was randomized to receive a plate that was appropriately matched in width to the distal radius. The contralateral limb received a narrow plate, which in all cases was undersized in width. Fixation stability was tested and compared to the contralateral matched specimen. Specimens were preloaded at 50 N for 30 seconds before cyclic loading from 50–250 N at 1 Hz for 5000 cycles then loaded to failure.

Results

Loss of fixation under cyclic loading was significantly greater in the specimens fixed with excessively narrow plates compared with plates of appropriate width. When loaded to failure, the plates of appropriate width were stiffer, with higher force at failure and compressive strength than narrow plates. The primary mode of failure was displacement of the distal lunate facet fragment.

Conclusions

These findings suggest that optimally matching the volar locking plate width to the radius may provide advantages for stability of the fixation construct and fragment capture. This may be due to reduced stress concentration from the distribution of forces across a larger surface area.

Clinical relevance

Optimizing the plate width to the radial width may improve fracture stability and may carry additional importance in comminuted fractures, where narrow plates may not completely capture small bone fragments.

The predictive value of disability at 2 weeks after plating of distal radial fractures: a prospective study of 101 patients

Assuming that some patients may benefit from early supervised rehabilitation after distal radial fractures, we investigated to what extent self-reported measures of disability, pain and performance of daily activities 2 weeks after anterior locking plating of distal radial fractures could predict long-lasting disability. We included 101 patients in a prediction study and recorded the scores of the Disability of the Arm, Shoulder and Hand questionnaire, visual analogue scales for pain and the Canadian Occupational Performance Measure. We found that the Disability of the Arm, Shoulder and Hand scores with a cut-off score of 50 were the best at predicting disability at 6 months in patients who did not receive early supervised therapy. The positive predictive value was 65% and the negative predictive value was 71%. We conclude that these scores could be used as a single measure to predict patient disability, although the predictive value was rather weak.Level of evidence: II.

Grip Strength Measurement for Outcome Assessment in Common Hand Surgeries

Grip strength has been used to evaluate the upper extremity functional status and clinical outcomes following upper extremity trauma or surgery. Understanding general recovery patterns of grip strengthening can be helpful in assessing the patients’ recovery status and in assisting in preoperative consultations regarding expectations for recovery. We summarize related studies on grip strength measurement and recovery patterns in common hand conditions, including carpal tunnel syndrome, cubital tunnel syndrome, triangular fibrocartilage complex injury, and distal radius fractures.

A post-surgical rehabilitation program for women over 60 years old who underwent surgery in trauma and orthopedic hospital after distal radius fracture

INTRODUCTION

Distal radius fractures (DRFs) are associated with a high economic burden and an impact on quality of life on these patients. Its high prevalence demonstrates the importance of registering functional results, with emphasis on vulnerable population such as elderly females.

METHODS

Thirty-six patients were admitted to a multimodal rehabilitation program. Exercise progressions combined with manual therapy and electrophysical agents were provided, taking into account bone and soft tissues healing stages, protection of surgical intervention and symptoms of each patient. The primary outcome was the Patient Rated Wrist Evaluation (PRWE) questionnaire. The secondary outcomes were wrist and forearm range of motion (ROM), grip strength and lateral and tripod pinch strength. The paired t-test was used to compare mean PRWE, ROM, and strength between 6 and 12 weeks.

RESULTS

An improvement of functionality was observed with a decreased of -20.9 (CI 95%: 25.9 to -15.9) points in the PRWE questionnaire (p < 0.001) between 6 and 12 weeks after DRF surgery. In addition, an increase in the ROM of the wrist (p < 0.001), grip strength (p < 0.001), lateral pinch (p < 0.001) and tripod pinch (p < 0.001) were observed between 6 and 12 weeks after surgery.

CONCLUSIONS

These findings showed a clinically and statistically significant improvement in function, ROM, and strength assessed at weeks 6 and 12 after surgery. However, this study design cannot establish a cause-and-effect relationship. Future randomized controlled clinical trials should investigate the effectivity of similar rehabilitation programs.