Calcined magnesite as an adsorbent for cationic and anionic dyes: characterization, adsorption parameters, isotherms and kinetics study

Highly Efficient Biosorption of Cationic Dyes via Biopolymeric Adsorbent-Material-Based Pectin Extract Polysaccharide and Carrageenan Grafted to Cellulosic Nonwoven Textile

Water scarcity and contamination have emerged as critical global challenges, requiring the development of effective and sustainable solutions for the treatment of contaminated water. Recently, functionalized polymer biomaterials have garnered significant interest because of their potential for a wide range of water treatment applications. Accordingly, this paper highlights the design of a new adsorbent material based on a cellulosic nonwoven textile grafted with two extracted biopolymers. The layer-by-layer grafting technique was used for the polyelectrolyte multi-layer (PEM) biosorbent production. Firstly, we extracted a Suaeda fruticosa polysaccharide (SFP) and confirmed its pectin-like polysaccharide structure via SEC, NMR spectroscopy, and chemical composition analyses. Afterward, the grafting was designed via an alternating multi-deposition of layers of SFP polymer and carrageenan crosslinked with 1,2,3,4-butanetetracarboxylic acid (BTCA). FT-IR and SEM were used to characterize the chemical and morphological characteristics of the designed material. Chemical grafting via polyesterification reactions of the PEM biosorbent was confirmed through FT-IR analysis. SEM revealed the total filling of material microspaces with layers of grafted biopolymers and a rougher surface morphology. The assessment of the swelling behavior revealed a significant increase in the hydrophilicity of the produced adsorbent system, a required property for efficient sorption potential. The evaluation of the adsorption capabilities using the methylene blue (MB) as cationic dye was conducted in various experimental settings, changing factors such as the pH, time, temperature, and initial concentration of dye. For the untreated and grafted materials, the greatest adsorbed amounts of MB were 130.6 mg/g and 802.6 mg/g, respectively (pH = 4, T = 22 C, duration = 120 min, and dye concentration = 600 mg/L). The high adsorption performance, compared to other reported materials, was due to the presence of a large number of hydroxyl, sulfonate, and carboxylic functional groups in the biosorbent polymeric system. The adsorption process fitted well with the pseudo-first-order kinetic model and Langmuir/Temkin adsorption isotherms. This newly developed multi-layered biosorbent shows promise as an excellent adsorption resultant and cheap-cost/easy preparation alternative for treating industrial wastewater.

A review on existing and emerging approaches for textile wastewater treatments: challenges and future perspectives

This comprehensive review explores the complex environment of textile wastewater treatment technologies, highlighting both well-established and emerging techniques. Textile wastewater poses a significant environmental challenge, containing diverse contaminants and chemicals. The review presents a detailed examination of conventional treatments such as coagulation, flocculation, and biological processes, highlighting their effectiveness and limitations. In textile industry, various textile operations such as sizing, de-sizing, dyeing, bleaching, and mercerization consume large quantities of water generating effluent high in color, chemical oxygen demand, and solids. The dyes, mordants, and variety of other chemicals used in textile processing lead to effluent variable in characteristics. Furthermore, it explores innovative and emerging techniques, including advanced oxidation processes, membrane filtration, and nanotechnology-based solutions. Future perspectives in textile wastewater treatment are discussed in-depth, emphasizing the importance of interdisciplinary research, technological advancements, and the integration of circular economy principles. Numerous dyes used in the textile industry have been shown to have mutagenic, cytotoxic, and ecotoxic potential in studies. Therefore, it is necessary to assess the methods used to remediate textile waste water. Major topics including the chemical composition of textile waste water, the chemistry of the dye molecules, the selection of a treatment technique, the benefits and drawbacks of the various treatment options, and the cost of operation are also addressed. Overall, this review offers a valuable resource for researchers and industry professionals working in the textile industry, pointing towards a more sustainable and environmentally responsible future.

Preparation of alkali lignin extracted from ligno-cellulosic populus tremula fibers: Application to copper oxide nanoparticles synthesis, characterization, and methylene blue biosorption study

The green synthesis of nanoparticles using biogenic approaches constitutes a challenge for effective applications. The massive aliphatic hydroxyl groups of lignin exhibited excellent reduction properties allowing the production of metallic nanoparticles. In this work, alkali lignin was extracted from virgin populus tremula and used for the preparation of copper oxide nanoparticles. The analysis of the prepared nanoparticles was assessed using Fourier Transform Infra-red (FT-IR), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray spectroscopy (EDX), and Transmission Electron Microscopy (TEM). FT-IR results displayed that different phytochemicals constituents of lignin extract were responsible for the production of CuO nanoparticles. XRD information demonstrated monoclinic CuO nanoparticles with a mean size of 12.4 nm. SEM images showed that some nanoparticles were quite separated from each other and some of them were agglomerated due to the oxidation of metal nanoparticles. TEM photos indicated that the overlap of the nanoparticles resulted in rectangular patterns due to the presence of lignin on the surface of CuO nanoparticles. Finally, the prepared CuO nanoparticles were applied for the removal of methylene blue from water. The results showed that the maximum adsorption capacity reached 85 mg/g at the following conditions: T = 20 °C, pH = 6, and time = 60 min.

Synthesis of copper oxide nanoparticles using Pergularia tomentosa leaves and decolorization studies

In this investigation, Pergularia tomentosa leaves were used as a promising source of bioproducts for the reduction of copper sulfate into copper oxide nanoparticles. The prepared nanoparticles were characterized using Fourier-transform infrared spectroscopy (FT-IR), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission electron microscopy (TEM), and Thermogravimetric analysis (TGA). FI-IR showed the presence of hydroxyl, ester, and aromatic groups, which are characteristics of phenolics and other bioproducts. SEM features exhibited spherical and agglomerated particles. In EDX data, the peak at 1 Kev, is an index of metallic nanoparticles of copper. The signals related to C and O peaks indicated the presence of phytochemicals in the studied extract. The synthesized copper oxide nanoparticles had a face-centered cubic structure. The size of the nanoparticles varied from 1.7 to 15.2 nm. The adsorption capacity of methylene blue using copper oxide nanoparticles reached 93.2 mg/g (pH = 6, T = 22 °C, adsorbent dose = 0.0125 g). Additionally, methylene blue solution was completely decolorized after 2 min of reaction (pH = 6, 0.0057 mg NaBH₄, C₀ = 10 mg/L, catalyst = 0.005 g). NOVELTY STATEMENTIn this study, Pergularia tomentosa leaves were used, for the first time, as a biomaterial rich in bioproducts for the reduction of copper sulfate into copper oxide nanoparticles. The prepared particles act as promising materials for the decolorization of contaminated water via both adsorption and degradation processes.

Leaching Performance and Zinc Ions Removal from Industrial Slag Leachate Using Natural and Biochar Walnut Shell

This study aims to investigate leaching characteristics of zinc slag according to leaching tests, including; TCLP (Toxicity Characteristic Leaching Procedure), SPLP (Synthetic Precipitation Leaching Procedure), ASTM-D3987 (American Society for Testing and Materials), and TS EN-12457-4 (Turkish Standards Institute) tests methods. The present study describes the adsorption potential of natural and biochar walnut shells for removing ions from the zinc leachate. TCLP leachate, with a value of 38.575 mg/L, has a high zinc (Zn⁺²) concentration compared to other methods. Therefore, TCLP leachate was used in the adsorption experiments. Adsorption experiments were carried out at different adsorbent dosages, pH values, and contact time conditions. In the dosage study, the highest removal efficiency was obtained as 84% and 92% in natural and biochar walnut shell adsorbents, respectively. As a result of pH study, it was observed that adsorption under alkaline conditions had a much higher removal efficiency. Moreover, adsorption studies performed against contact time were applied to four different kinetic models and both adsorbents were found to be fit with the pseudo-second-order model. This kinetic model showed that the Zn⁺² adsorption mechanism of natural and biochar walnut shells is chemical adsorption. With this study, it was shown that a very high 96% zinc removal can be achieved under optimum adsorption conditions. This may be the first study of zinc removal after leaching from industrial slag in the literature. This study has shown that high removal efficiencies can be obtained by an economical adsorbent.

Design and Evaluation of a New Natural Multi-Layered Biopolymeric Adsorbent System-Based Chitosan/Cellulosic Nonwoven Material for the Biosorption of Industrial Textile Effluents

The adsorption phenomenon using low-cost adsorbents that are abundant in nature is of great interest when the adsorbed capacity is significant. A newly designed natural polyelectrolyte multi-layered (PEM) biopolymeric system-based chitosan/modified chitosan polymer and functionalized cellulosic nonwoven material was prepared and used as an effective adsorbent for Reactive Red 198 (RR198) dye solutions. The bio-sorbent was characterized by FTIR, SEM, and thermal (TGA/DTA) analysis. The swelling behavior was also evaluated, showing the great increase of the hydrophilicity of the prepared adsorbent biopolymer. The effect of various process parameters on the performance of RR198 dye removal such as pH, contact time, temperature, and initial dye concentration was studied. The biopolymeric system has shown good efficiency of adsorption compared to other adsorbents based on chitosan polymer. The highest adsorption capacity was found to be 722.3 mgg⁻¹ at pH = 4 (ambient temperature, time = 120 min and dye concentration = 600 mg L⁻¹). The adsorption process fitted well to both pseudo-second-order kinetics and Freundlich/Temkin adsorption isotherm models. Regarding its low cost, easy preparation, and promising efficient adsorption results, this new concepted multi-layered bio-sorbent could be an effective solution for the treatment of industrial wastewater.

Terephthalaldehyde as a good crosslinking agent in crosslinked chitosan hydrogel for the selective removal of anionic dyes

This work reports the selectivity and good adsorption performance for the removal of anionic dyes using an ultrasonic-synthesized terephthalaldehyde crosslinked chitosan hydrogel.

Decolorization kinetics and mass transfer mechanisms of Remazol Brilliant Blue R dye mediated by different fungi

The release of synthetic dye into the environment causing abnormal growth of phytoplankton may lead to a decline in the photosynthetic performance of aquatic ecosystem. Scientific knowledge of Remazol Brilliant Blue R (RBBR) decolorization is essential for designing the engineered bioremediation systems of employing fungal mycelium. The biodegradation of RBBR dye mediated by an appropriate fungus was analyzed using the modified mass transfer factor models to get better understanding on the decolorization kinetics and mechanisms of external and internal mass transfer. The results showed that the limited capacities of the kinetic and isotherm models are still not able to comprehensively explain many important phenomena of RBBR decolorization mediated by the T. citrinoviride, T. koningiopsis and Pestalotiopsis sp. strains. The rate-limiting step of RBBR decolorization depends on the EMT resistance and the vegetative growth rates of T. citrinoviride, T. koningiopsis and Pestalotiopsis sp. strains can be described by second-order polynomial equation. The analysis of decolorization performance may provide a new insight on the role of fungus in the degradation of RBBR dye.

Fabrication of Zn-based magnetic zeolitic imidazolate framework bionanocomposite using basil seed mucilage for removal of azo cationic and anionic dyes from aqueous solution

The Basil seeds mucilaginous polysaccharide exhibits remarkable physical and chemical properties like high water-absorbing capacity, emulsifying, and stabilizing properties. The metal-organic frameworks are one of the most promising precursors made of metal clusters and organic connectors for the fabrication of advanced adsorbents due to their unique properties. In this study, the bionanocomposite of magnetic zeolitic imidazolate framework-8 was successfully synthesized and applied to adsorb azo cationic and anionic dyes. The synthesized magnetite nanoparticles were pretreated with mucilage extracted from basil seeds to acquire negatively charged magnetite surface, followed by nucleation through attracting zinc cation, and then the growth of metal-organic frameworks which yields high-quality ZIF-8 crystals. The samples were characterized by Field Scanning Electron Microscopy, X-ray Diffraction, Fourier Transform Infrared Spectrometry, vibrating sample magnetometer, and Brunauer-Emmett-Teller surface area analysis. In the process of adsorption, influencing factors and recycling regeneration were discussed, and the adsorption mechanisms such as kinetics, isotherm, and thermodynamics were explored. The results of the adsorption process showed that maximum adsorption capacities were 9.09 and 13.21 mg/g for Methylene blue and Eriochrome Black T, respectively. The excellent reusability combined with its magnetic separation property makes the nanocomposite a promising adsorbent for the removal of cationic and anionic dyes.

A Cellulosic Fruit Derived from Nerium oleander Biomaterial: Chemical Characterization and Its Valuable Use in the Biosorption of Methylene Blue in a Batch Mode

Cellulose substrate waste has demonstrated great potential as a biosorbent of pollutants from contaminated water. In this study, Neriumoleander fruit, an agricultural waste biomaterial, was used for the biosorption of methylene blue from synthetic solution. Fourier-transform infrared (FTIR) spectroscopy indicated the presence of the main absorption peak characteristics of cellulose, hemicellulose, and lignin compositions. X-ray diffraction (XRD) pattern exhibited peaks at 2θ = 14.9° and 2θ = 22°, which are characteristics of cellulose I. Scanning electron microscopy (SEM) showed a rough and heterogeneous surface intercepted by some cavities. Thermogravimetric analysis (TGA) showed more than a thermal decomposition point, suggesting that Nerium fruit is composed of cellulose and noncellulosic matters. The pH_pzc value of Nerium surface was experimentally determined to be 6.2. Nerium dosage, pH, contact time, dye concentration, and temperature significantly affected the adsorption capacity. The adsorption capacity reached 259 mg/g at 19 °C. The mean free energy ranged from 74.53 to 84.52 KJ mol⁻¹, suggesting a chemisorption process. Thermodynamic parameters define a chemical, exothermic, and nonspontaneous mechanism. The above data suggest that Nerium fruit can be used as an excellent biomaterial for practical purification of water without the need to impart chemical functionalization on its surface.

Synthesis and characterization of Ethiopian kaolin for the removal of basic yellow (BY 28) dye from aqueous solution as a potential adsorbent

In the present research, the kaolin adsorbents (beneficiated, raw powder, and calcined) were prepared from Ethiopian natural kaolin through mechanical, wet, and thermal processes. The geochemical and surface properties of kaolin adsorbent were characterized using FTIR, SEM/EDS, XRD, and XRF. In the batch experiment, basic operation parameters (initial dye concentrations, pH, temperature, contact time, and adsorbent dosage) were examined. Percentage removal efficiency basic yellow 28 (BY28) dye were recorded as 94.79%, 92.08%, and 87.08% onto beneficiated, raw, and calcined kaolin absorbents, respectively at an initial dye concentration of 20 mg/L, solution pH of 9, the temperature of 30 °C°C , and contact time of 60 min and adsorbent dosage of 1g/100L. The molar ratio of SiO2/Al2O3 was recorded as 2.911 Percent mass composition of Ethiopian kaolin which is higher than the expected pure kaolinite standard which allows us to classify the kaolin clay as a siliceous one. The calculated values of Δ G 0 for beneficiated adsorbent are -1.243, 1.576, and 4.396 kJ/mol at 303.15, 323.15, and 343.15 K, respectively for 20 mg/L of dye concentration and solution pH of 9, suggests that the thermodynamic behavior at lowest temperature is more feasible and spontaneous as compared with the higher temperature one. A similar fashion was calculated for raw and calcined adsorbents. The negative values of ΔHo and ΔS° suggest that the adsorption phenomenon is exothermic and the adsorbate molecules are organized on the solid phase in a more disordered fashion than the liquid phase. The pseudo-first-order and pseudo-second-order models have been used to describe the kinetics in the adsorption processes. The Pseudo-second-order model has been fitted for the BY 28 dye adsorption in the studied concentration range. The adsorption of BY 28 dye for raw and calcined adsorbents follows the Langmuir isotherm and the Freundlich isotherm fitted for the beneficiated adsorbent. The amount of BY28 dye taken up by beneficiated, raw, and calcined kaolin adsorbents was found as 1.896, 1.842, and 1.742 mg/g, respectively at a contact time of 1.0 h, the adsorbent dosage of 1.0 g, initial dye concentration = 20 mg/L and solution pH = 9 at 30 °C. The results found that these raw and prepared local kaolin adsorbents have a capacity as low-cost alternatives for the removal of dyes in industrial wastewater.

Enhanced adsorption of methylene blue from textile wastewater by using natural and artificial zeolite

This study investigated the adsorption of methylene blue with natural and artificial zeolite. The effect of pH, contact time, initial concentration and adsorbent dose on adsorption was also investigated. An artificial dye was prepared. Adsorption removal efficiency was low at pH = 2, 3 and 4 but it was quite high at pH = 7. It was determined that the contact time reaches equilibrium within 60 minutes in the adsorption of methylene blue with natural and artificial zeolite. The initial dyestuff concentration for both adsorbents was 5 mg/L. For the removal of methylene blue, a 0.5 g natural and artificial zeolite dosage was sufficient. In order to express the adsorption of natural and artificial zeolite on methylene blue, Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (D-R) isotherm models were examined. In the isotherm study, both natural and artificial zeolite adapted to the Langmuir isotherm model. Langmuir correlation coefficient was 0.998 for artificial zeolite and 0.993 for natural zeolite. Both adsorbent materials best fit into the pseudo-second kinetic model with similar correlation coefficient values of 0.999.

Synthesis and characterization of eco-friendly cellulose beads for copper (II) removal from aqueous solutions

In this study, novel cellulose-bead-based biosorbents (CBBAS) were successfully synthesized from almond shell using a simple three-step process: (i) dissolution of bleached almond shell in ionic liquid (1-butyl-3-methylimidazolium chloride), (ii) coagulation of cellulose-ionic liquid solution in water and (iii) freeze-drying. Their morphological, structural and physicochemical properties were thoroughly characterized. These biomaterials exhibited a 3D-macroporous structure with interconnected pores, which provided a high number of adsorption sites. It should be noted that CBBAS biosorbents were efficiently employed for the removal of copper (II) ions from aqueous solutions, showing high adsorption capacity: 128.24 mg g^-1. The biosorption equilibrium data obtained were successfully fitted to the Sips model and the kinetics were suitably described by the pseudo-second-order model. Besides, CBBAS biosorbents can be easily separated from the solution for their subsequent reuse, and thus, they represent a method for the removal of copper (II) from aqueous solutions that is not only eco-friendly but also economical.

Novel hollow beads of carboxymethyl cellulose/ZSM-5/ZIF-8 for dye removal from aqueous solution in batch and continuous fixed bed systems

Zeolitic imidazolate frameworks are a class of metal-organic frameworks that are topologically isomorphic with zeolites. In this study, bionanocomposites of carboxymethyl cellulose-based ZSM-5/zeolitic imidazolate framework (CMC/ZSM-5/ZIF-8) hollow beads with different compositions were synthesized and employed as an adsorbent for methylene blue removal from aqueous solution in batch and continuous fixed bed systems. FESEM, FTIR, XRD, and BET measurements have been employed for characterizing the synthetic bionanocomposites. The effect of time and concentration on adsorption processes, regeneration, and reuse investigations were performed. The equilibrium batch adsorption capacities for CMC, CMC/ZIF-8, CMC/ZSM-5, and CMC/ZSM-5/ZIF-8 adsorbents were 12.01, 13.06, 11.53, and 10.49 mg/g, respectively. The batch adsorption was investigated using pseudo-first-order, pseudo-second-order, intra-particle diffusion, and Elovich kinetic models and the results showed that all four adsorbents are consistent with all models but the pseudo-first-order model showed more consistency. The equilibrium continuous adsorption capacities for CMC, CMC/ZIF-8, CMC/ZSM-5, and CMC/ZSM-5/ZIF-8 adsorbents were 10.56, 11.87, 9.29, and 8.15 mg/g, respectively. The continuous adsorption was investigated by Thomas, Adam-Bohart, Yoon-Nelson, Wolborska, and Modified Dose Response kinetic models and the results showed that the adsorbents showed more consistency with models of Thomas, Yoon-Nelson, and Modified Dose Response. Besides, the generation process was successfully assessed in five steps.

A novel method for highly effective removal and determination of binary cationic dyes in aqueous media using a cotton–graphene oxide composite

The presence of dyes in industrial wastewater is a serious problem that hazards the surrounding environment.

Elimination performance of methylene blue, methyl violet, and Nile blue from aqueous media using AC/CoFe2O4 as a recyclable magnetic composite

The present paper describes the sono-assisted adsorption (sono-adsorption) of methylene blue (MB), methyl violet (MV), and Nile blue (NB) from aqueous solution by AC/CoFe₂O₄ magnetic composite. FT-IR, TGA-DTG, VSM, XRD, TEM, SEM, EDX, Map, and Raman analysis were used to characterize the magnetic composite. The magnetization saturation value of AC/CoFe₂O₄ magnetic composite was determined to be 53.06 emu/g. Dye sono-adsorption efficiency was increased by increasing adsorbent dose, pH value, and contact time, but not dye concentration. Pseudo-first-order, pseudo-second-order, and intra-particle diffusion models were used to study the kinetic behavior of the cationic dye sono-adsorption. The sono-adsorption kinetics was reasonably followed by pseudo-second-order model (R² > 0.998). The results showed that the Freundlich model (R² > 0.976) was more able to describe the sono-adsorption equilibrium behavior than Langmuir, D-R, and Scatchard models. The maximum sono-adsorption capacity of NB, MV, and MB was determined as 86.24, 83.90, and 87.48 mg/g, respectively. Based on the parameters derived from isotherm modeling (R_L, n, and E), the sono-adsorption process of cationic dyes is desirable and physical. An increase in NaCl concentration reduced the sono-adsorption efficiency for all dyes. Also, the adsorption-desorption of AC/CoFe₂O₄ magnetic was studied up to 10 stages, and it was confirmed that the sono-adsorption efficiency is acceptable up to the eight stage. AC/CoFe₂O₄ magnetic composite is, therefore, an affordable and recyclable adsorbent to remove the molecule of NB, MV, and MB dyes from aqueous media.