The effect of brewery sludge biochar on immobilization of bio-available cadmium and growth of Brassica carinata

Cadmium removal from aqueous solution by blended bamboo sawdust/rice-husk biochar; optimization of influencing parameters

This study attempted to investigate the adsorptive potential of blended bamboo (Oxytenanthera abyssinica) sawdust/rice husk (BSD/RH) at a ratio of 1:1 carbonized at 400 °C for the sorption of cadmium ions from synthetic solutions in batch mode. The Box-Behnken Design in response surface methodology (RSM) was used to achieve the best removal efficiency and adsorption capacity of the biochar. With a p-value of 0.0001, the initial Cd2+ concentration and adsorbent dose were discovered to be the most significant parameters controlling the adsorption capacity and removal efficiency of Cd2+ from the solution. At a pH of 8.95, ionic strength of 0.020 mol/L KNO3, a contact time of 15 min, an initial concentration of 200 mg/L, and an adsorbent dose of 0.5 g, the optimum Cd2+ removal and adsorption capacity of 99.97% and 358.65 mg/g, respectively, were obtained. The optimized conditions were later used to determine the removal efficiency and adsorption capacity of pristine biochars of rice husk and bamboo sawdust, which were found to be 79.8% and 83.7%, respectively. This finding indicates the potential for using biosorbent derived from blended feedstock materials to remove heavy metals such as cadmium.

Experimental and simulation analysis of biogas production from beverage wastewater sludge for electricity generation

This study assessed the biogas and methane production potential of wastewater sludge generated from the beverage industry. The optimization of the biogas production potential of a single fed-batch anaerobic digester was operated at different temperatures (25, 35, and 45 ℃), pH (5.5, 6.5, 7.5, 8.5, and 9.5), and organic feeding ratio (1:3, 1:4, 1:5, and 1:6) with a hydraulic retention time of 30 days. The methane and biogas productivity of beverage wastewater sludge in terms of volatile solid (VS) and volume was determined. The maximum production of biogas (15.4 m³/g VS, 9.3 m³) and methane content (6.3 m³/g VS, 3.8 m³) were obtained in terms of VS and volume at 8.5, 35 ℃, 1:3 of optimal pH, temperature, and organic loading ratio, respectively. Furthermore, the maximum methane content (7.4 m³/g VS, 4.4 m³) and biogas production potential (17.9 m³/g VS, 10.8 m³) were achieved per day at room temperature. The total biogas and methane at 35 ℃ (30 days) are 44.3 and 10.8 m³/g VS, respectively, while at 25 ℃ (48 days) increased to 67.3 and 16.1 m³/g VS, respectively. Furthermore, the electricity-generating potential of biogas produced at room temperature (22.1 kWh at 24 days) and optimum temperature (18.9 kWh) at 40 days was estimated. The model simulated optimal HRT (25 days) in terms of biogas and methane production at optimum temperature was in good agreement with the experimental results. Thus, we can conclude that the beverage industrial wastewater sludge has a huge potential for biogas production and electrification.