Improved heavy metal immobilization of compacted clay by cement treatment

Evaluating the Potential of Multi-Walled Carbon Nanotube-Modified Clay as a Landfill Liner Material

In this paper, the feasibility of multi-walled carbon nanotube (MWCNT)-modified clay as a landfill liner material is investigated. Experiments were conducted on the modified clay with 0.5%, 1%, and 2% MWCNTs. The effects of the MWCNTs on the compaction characteristics, permeability coefficient, stress-strain curve, peak deviation stress, shear strength parameters (internal friction angle and cohesion), microstructures, and adsorption performance of the clay were analyzed. The results showed that the optimum moisture content (OMC) increased from 16.15% to 18.89%, and the maximum dry density (MDD) decreased from 1.79 g/cm3 to 1.72 g/cm3 with the increase in MWCNTs. The permeability coefficients firstly fell and then gradually rose as the MWCNTs increased; the minimum permeability coefficient was 8.62 × 10-9 cm/s. The MWCNTs can also effectively increase the peak deviation stress of the clay, and at the maximum level, the peak deviation stress was increased by 286%. SEM images were processed using the Pore and Crack Analysis System (PCAS), and the results showed that the appropriate amount of MWCNTs could fill the pores and strengthen the clay structure. The effect of the MWCNT-modified clay on the adsorption performance of common heavy metal ions Cd2+, Mn2+ and Cu2+ in landfill leachate was analyzed by batch adsorption tests. The maximum adsorption capacities (Qmax) of Cu2+, Cd2+ and Mn2+ in the 2% MWCNT-modified clay were, respectively, 41.67 mg/g, 18.69 mg/g, and 4.97 mg/g. Compared with the clay samples without MWCNTs, the adsorption properties of Cu2+, Cd2+, and Mn2+ were increased by 228%, 124%, and 202%, respectively. Overall, the results suggest that MWCNT-modified clays have the potential to be suitable barrier materials for the construction of landfills.

Efficient HCl leaching of platinum group metals from waste three-way catalysts: A study on kinetics and mechanisms

Waste three-way catalysts (TWCs) have attracted much attention due to the presence of platinum group metals (PGMs) and hazardous substances such as heavy metals and organic matter. The extraction of PGMs from waste TWCs using hydrochloric acid (HCl) has been extensively researched. However, the addition of oxidizing agents like H2O2 and aqua regia is necessary to facilitate PGMs dissolution, which poses significant environmental and operational hazards. Hence, developing a green PGMs recovery process without oxidants is imperative. Previously, we investigated the process of Li2CO3 calcination pretreatment to enhance the leaching of PGMs from waste TWCs by HCl, focusing on the process and mechanism of Li2CO3 calcination pretreatment. In this study, we focused on the leaching process of HCl after pretreatment. Our investigation includes a detailed examination of leaching kinetics and mechanisms. The optimal leaching conditions were: leaching temperature of 150 °C, leaching time of 2 h, HCl concentration of 12 M, and liquid-solid ratio of 10 mL/g. The experiments resulted in maximum leaching rates of about 96%, 97%, and 97% for Pt, Pd, and Rh, respectively. However, given the presence of heavy metals, attention needs to be paid to the harmless treatment of waste acids and leaching residues. The Pt and Pd leaching process is controlled by a mixture of interfacial chemical reactions and internal diffusion, and dominated by internal diffusion, while the leaching process of Rh is controlled by interfacial chemical reactions. Li+ in Li2PtO3, Li2PdO2, and Li2RhO3 preferentially leached and underwent ion-exchange reactions with H+, promoting the dissolution of Pt, Pd, and Rh in HCl.

Diatom microalgae as smart nanocontainers for biosensing wastewater pollutants: recent trends and innovations

Microalgae have been recognized as one of the most efficient microorganisms to remediate industrial effluents. Among microalgae diatoms are silica shelled unicellular eukaryotes, found in all types of water bodies and flourish very well even in wastewater. They have their silica cell wall made up of nano arrayed pores arranged in a uniform fashion. Therefore, they act as smart nanocontainers to adsorb various trace metals, dyes, polymers, and drugs which are hazardous to human as well to aquatic life. The beautiful nanoarchitecture in diatoms allows them to easily bind to ligands of choice to form a nanocomposite structure with the pollutants which can be a chemical or biological component. Such naturally available diatom nanomaterials are economical and highly sensitive compared to manmade artificial silica nanomaterials to help in facile removal of the toxic pollutants from wastewater. This review is thus focused on employing diatoms to remediate various pollutants such as heavy metals, dyes, hydrocarbons detected in the wastewater. It also includes different microalgae as biosensors for determination of pollutants in effluents and the perspectives for nanotechnological applications in the field of remediating pollutants through microalgae. The review also discusses in length the hurdles and perspectives of employing microalgae in wastewater remediation.