New approach for the dimensionless analysis of a unidirectional flow solar reactor based on Damköhler's number profiles

Dose Distribution Scaling and Validation of Ultraviolet Photoreactors Using Dimensional Analysis

Ultraviolet (UV) disinfection is commonly applied in the treatment of drinking water and wastewater. The performance of UV disinfection systems is governed by the UV dose distribution delivered to the fluid, which is an intrinsic characteristic of the reactor under a given operating condition. Current design and validation approaches are based on empirical methods that are expensive to apply and provide limited information about the UV photoreactor behavior. To address this issue, a dose distribution scaling method was developed based on dimensional analysis (i.e., application of the Buckingham-π theorem). Three dimensionless groups representing UV dose, reactor geometry, and UV absorption behavior were defined. Using these groups, the approach was applied for the analysis of 15 operating conditions, defined by process variables of volumetric flow rate, UV transmittance, and lamp power. The approach was demonstrated to allow scaling of the dose distribution with these critical, dimensionless variables and yielded close agreement between predictions of disinfection efficacy against MS2 and E. coli based on the scaling approach with conventional CFD-E' modeling results. The approach thus provides a low-cost, rapid method for predicting the performance of UV disinfection systems across a wide range of operating conditions and against essentially any microbial challenge agent.

Engineering and modeling perspectives on photocatalytic reactors for water treatment

The debate on whether photocatalysis can reach full maturity at commercial level as an effective and economical process for treatment and purification of water and wastewater has recently intensified. Despite a bloom of scientific investigations in the last 30 years, particularly with regards to innovative photocatalytic materials, photocatalysis has so far seen a few industrial applications. Regardless of the points of view, it has been realized that research on reactor design and modeling are now equally urgent to match the extensive research carried out on innovative photocatalytic materials. In reality, the development of photocatalytic reactors has advanced steadily in terms of modeling and reactor design over the last two decades, though this topic has captured a smaller specialized audience. In this critical review, we introduce the latest developments on photocatalytic reactors for water treatment from an engineering perspective. The focus is on the modeling and design of photocatalytic reactors for water treatment at pilot- or at greater scale. Photocatalytic reactors utilizing both natural sunlight and UV irradiation sources are comprehensively discussed. The most promising photoreactor designs and models are examined giving key design guidelines. Other engineering considerations, such as operation, cost analysis, patents, and several industrial applications of photocatalytic reactors for water treatment are also presented. The dissemination of key photocatalytic reactor design principles among the scientific community and the water industry is currently one of the greatest obstacles in translating PWT research into widespread real-world application.