The kinetics of thin-layer drying and modelling for mango slices and the influence of differing hot-air drying methods on quality

Impact of ripening stages and drying techniques on the physicochemical and sensory attributes of apple mango chips

Mangoes (Mangifera indica L.) are valued for their rich nutrients, including vitamins A, B, C, carotenoids, and phenolic compounds. However, high moisture content and seasonal availability contribute to post-harvest losses of up to 50%. To reduce these losses and extend shelf life, drying methods like solar, convective, and freeze-drying are used, each impacting dried mango quality differently. This study examines how ripening stages and drying methods affect the physicochemical and sensory qualities of apple mango chips, analyzing attributes such as moisture (7.81%-11.50%), protein (2.49%-2.89%), fat (0.78%-1.11%), pH, total soluble solids, and color parameters (L* and a* values). Results show that solar drying, especially for fully ripe mangoes, enhances color and sensory qualities, with fully ripe, solar-dried mango chips receiving the highest ratings for color, taste, flavor, and aroma. This emphasizes the importance of optimizing ripeness and drying techniques to improve dried mango quality. Although solar drying is cost-effective and preserves sensory qualities, limitations include nutrient loss and limited access to advanced drying technologies like freeze-drying, especially in developing regions. The study's focus on apple mangoes and a small, non-trained sensory panel may limit generalizability, suggesting that future research could explore additional drying methods across more mango varieties. Larger sensory panels with trained evaluators may provide broader insights. This study offers valuable strategies for enhancing dried mango production and marketability. By optimizing ripening stages and drying techniques, industry professionals and researchers can improve product quality, meet consumer preferences, and support sustainability, benefiting local farmers and global markets.

Investigation of the impact of cold plasma pretreatments, long term storage and drying on physicochemical properties, bioactive contents and microbial quality of 'Keitt' mango

There is heightened demand for dried mango fruits with desired nutritional and physicochemical qualities, microbiologically stable and chemical residue free. This has led to the exploration of innovative preservation technologies for the extension of storability prior to processing. This study investigated the impact of cold plasma (CP) treatment on physicochemical properties and microbial stability in fresh and dried 'Keitt' mango during long term storage. Freshly harvested 'Keitt' mangoes were subjected to: CP treatment (for 5 min (CP5) and 10 min, CP10), dipping in "Chronos Prochloraz" for 30 s (industry practice), and untreated group (control). All samples were stored at 11 °C for 30 days, prior to minimal processing and hot air drying at 60 °C. Results after 30 days of storage demonstrated that untreated samples (control) had the highest TSS (15.06 ± 0.32 °Brix), while CP10 pretreated samples had the lowest TSS (13.80 ± 0.06 °Brix) value (p ≤ 0.05). In comparison to the fresh samples post storage, all pretreated dried mango slices retained lower total flavanols with CP5 (13.49 ± 1.64 mg GAE 100/g), CP10 (20.12 ± 1.42 mg GAE 100/g) and SMB (23.89 ± 3.35 mg GAE 100/g), but higher than the dried untreated samples (6.68 ± 0.53 mg GAE 100/g). Yellowness (b∗) of the fresh pulp (38.53 ± 1.73) increased significantly (p ≤ 0.05) with the long-term storage (39.88-46.74) and drying (55.01-64.90). CP pre-treatment combined with drying resulted in ≥2 Log reduction in microbial count. This study shows the potential of cold plasma as a pretreatment for extending storability and maintaining the quality of 'Keitt' mangoes.

Investigating intermittent immersion during osmotic dehydration of mango (Mangifera indica L. Moench). Part B mathematical modeling of D2I and D3I kinetics in mango (Mangifera indica L. Moench) slices

This work aims to investigate the dynamics of water loss (WL) and solute gain (SG) during dehydration impregnation by immersion (D2I) and intermittent immersion (D3I). WL and SG of mango slices, 4 × 1 × 1 cm3 in size, during dehydration immersion impregnation (D2I) and dehydration impregnation by intermittent immersion (D3I) were determined at 35, 45 and 55 °C for 270 min. Mango slices were immersed in a hypertonic sucrose solution of (61.6 ± 0.2) °Brix at a ratio of 6 mL of hypertonic solution per gram of fruit. Five semi-empirical models, two of which have been modified, were used to study mass transfer during D2I and D3I, namely the Azura, Weibull, Crank, Modified Crank I, and Modified Crank II models. The equilibrium water loss (WL ∞ ), the equilibrium solute gain (SG ∞ ), the diffusion coefficient, and activation energy were determined using the Modified Crank II model which was the best of all the tested models. Equilibrium water loss during D2I decreased with increasing temperature, while during D3I it increased with temperature. TheSG ∞ during D2I and D3I increases with temperature but was higher in D2I than in D3I. The average water diffusion coefficients were (6.02 ± 2.62) × 10-8 m2 s-1 for D2I and (4.89 ± 0.55) × 10-8 m2 s-1 for D3I and the average solute diffusion coefficients were (4.45 ± 0.53) × 10-8 m2 s-1 for D2I and (8.33 ± 0.79) × 10-8 m2 s-1 for D3I. The activation energies for WL in D2I and D3I were respectively 38789 J mol-1 and 9503 J mol-1. The respective values for SG were 9037 J mol-1 and 7327 J mol-1. This work demonstrates that mass transfers in D3I are better than those in D2I, and it highlights that, unlike the D2I process, the D3I process is less sensitive to temperature variations, making it particularly advantageous for processing products with high nutritional value.

Impact of electrolyzed water as pre-treatments on drying properties and total colour difference of fresh-cut 'Tommy Atkins' mangoes

Mango fruits are a rich source of nutrients, however, due to their perishability and seasonality, minimal processing and drying offer the potential ensure a shelf stable and safe product. The use of sodium metabisulphite (SMB) as pre-treatment in the dried fruit industry has been widely adopted, but sulphite residue remains a health public concern. Therefore, this study investigated the effects of alkaline and acidic electrolyzed water (AIEW and AEW, mg/mL) as alternative pre-treatments to SMB (1% w/w) for 'Tommy Atkins' mango slices prior to hot air drying at 60 °C. Fresh-cut and untreated samples were used as a control. During the drying process the weight of the slices were monitored every 60 min for 10 h, which was used to calculate moisture ratio (MR), drying rate (DR), and the experimental data of the samples were subjected to eight thin layer models. Colour parameters (L*, a*, and b*) were measured, and use to determine colour intensity (C*), hue angle (h°), and total colour difference (TCD) before and after drying. Based on measured weight, continuous decline in MR was recorded for all dried mango slices over the drying time irrespective on treatment. Out of the eight applied thin layer models Henderson & Pabis and Logarithmic were the best appropriate models describing and predicting the drying behavior of 'Tommy Atkins' mangoes (R2 = 0.94, RMSE ≥ 0.0006). Samples treated with AEW treated samples had lowest L*, h°, and TCD values (p < 0.05). No significant different were found in h° values amongst all pre-treated and dried samples (p > 0.05), but these samples were significantly different from dried untreated (control) and fresh samples (p < 0.05). Pre-treatments maintained the visual quality of dried 'Tommy Atkins' mango slices; SMB > AIEW > AEW > untreated (control). This study provided science-based evidence for the application of acidic and alkaline electrolyzed water as an alternative pre-treatment to sodium metabisulphite for the drying of 'Tommy Atkins' mango.

Effective moisture diffusivity prediction in two Portuguese fruit cultivars (Bravo de Esmolfe apple and Madeira banana) using drying kinetics data

Air convective dehydration was performed at various temperatures (35 °C, 40 °C, 45 °C and 50 °C) using two types of fruits cultivars produced in different regions of Portugal: the Bravo de Esmolfe apple, from the Beiras province, and the Cavendish banana, from Madeira Island. The data collected were used to predict the effective moisture diffusion, which is a crucial input parameter in drying modeling and design. As expected, the values obtained in both falling drying rate periods detected for apples increased with an increase in drying temperature. The effective moisture diffusion in apples varied from 1.968 × 10^-10 m² s^-1 at 35 °C to 4.013 × 10^-10 m² s^-1 at 50 °C, for the first falling drying rate period, and from 0.9567 × 10^-10 m² s^-1 at 35 °C to 3.328 × 10^-10 m² s^-1 at 50 °C, for the second period. The dependence of effective moisture diffusion on temperature for bananas is similar, ranging from 1.572 × 10^-10 to 2.627 × 10^-10 m² s^-1 as the drying temperature changed from 35 to 50 °C.

Drying kinetics and attributes of fructus aurantii processed by hot air thin-layer drying at different temperatures

The primary objectives of this study were to evaluate the drying kinetics of Fructus Aurantii (FA), and to investigate how hot air drying at various temperatures affected the surface texture and sensory quality of the volatile fragrance components. The results were best simulated by the Overhults model, and use of scanning electron microscopy (SEM) and Heracles Neo ultra-fast gas phase electronic nose technology allowed for detection of changes in surface roughness and aromatic odors. The limonene content varied from 74.1% to 84.2% depending on the drying temperature, which ranged from 35°C to 75 °C. Furthermore, principal component analysis (PCA) revealed that the aromatic compound profile underwent considerable changes during the drying process. Overall, the present findings demonstrate that hot air thin-layer drying at 55 °C can significantly enhance the final quality of FA while preserving the taste properties and providing optimum medicinal and culinary characteristics.

Insight into the Effects of Drying Methods on Lanzhou Lily Rehydration

This study investigated the effects of drying methods (hot air drying (HAD), microwave vacuum drying (MVD), and vacuum freeze drying (VFD)) on the rehydration performance (RP) of dried Lanzhou lily scales (LLS). Rehydration rate and water migration showed that MVD had the best RP, followed by VFD, while HAD had the worst. The results of additional morphology observation using scanning electron microscopy (SEM) and micro X-ray computed tomography (CT) imaging showed that both MVD and VFD created more channels in more porous structures, which facilitated their better RP than that by HAD. The results also revealed the spatial structure diversity (including pores, channels size, and internal network) of each dried Lanzhou lily scale group. In addition, studies analyzed how drying techniques affected the physiochemical properties of lily starch, including its water solubility, pasting profiles, and starch particle morphology. The findings indicated that when MVD was in operation, partial gelatinization in lily starch was brought about by thermal effects, allowing MVDS crystals to change from B-type to V-type and causing MVDS to have better water absorption ability. Consequently, despite the fact that MVD's desiccated lilies have a lower porous structure and thinner channels than VFD's, MVD has a higher RP than VFD.

Effects of roasting on the chemical compositions, color, aroma, microstructure, and the kinetics of changes in coffee pulp

Roasting is a critical process that affects the quality attributes of coffee beans; however, how roasting conditions affect the physical, chemical, biological, and organoleptic changes of coffee pulp needs more research. In the present study, we investigated the effects of roasting temperatures and times on chemical compositions and quality attributes of coffee pulp. The results showed that the contents of total soluble sugar (TSS) and free amino acid (FAA) followed a temporal pattern of first increasing and then decreasing under the roasting temperatures between 100 and 160°C. Total phenolic content (TPC) and antioxidant activity of coffee pulp significantly (p < 0.05) increased after roasting, reaching the maximum values of 83.09 mg gallic acid equivalent (GAE) /g and 360.45 µM 6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid (Trolox) /g, respectively, when coffee pulp was roasted at 160°C for 18 min. Drying rates of coffee pulp fitted the Logarithmic kinetic model, while color (L*, a*, and b*) changes and 5-caffeoylquinic acid degradation followed the first-order kinetic model. Electronic nose analysis showed that the main aroma compounds of the coffee pulp are sulfur-containing organics that were reduced with the extended roasting time. Scanning electronic microscopy analysis presented the loosened, shrunk, and cracked microstructure on the surface of the roasted coffee pulp, which might contribute to the increased TSS, FAA, TPC, and antioxidant activity of coffee pulp roasted under specific conditions. In conclusion, our research provides valuable information for preparing high-quality coffee pulp tea. PRACTICAL APPLICATION: This article investigates the effects of roasting on the chemical composition, color, flavor, microstructure, and the kinetics of changes in the moisture, color, and 5-caffeoylquinic acid (5-CQA) of the coffee pulp. We have found that high-temperature and short-time roasting helps retain the total phenolic contents, antioxidant activity, and aroma. The drying kinetic fits the Logarithmic model, and the changes in color and 5-CQA fit the first-order kinetic model. This study provides meaningful information for preparing coffee pulp tea with high-quality attributes and antioxidant activity.

Based on quality, energy consumption selecting optimal drying methods of mango slices and kinetics modelling

Mangoes have a short shelf life because of their high-water content. This study aimed to compare the effect of three drying methods (HAD, FIRD and VFD) on mango slices to improve product quality and reduce costs. Mangoes were dried at various temperatures (50, 60, 70 °C) with different slice thicknesses (3, 5, 7, 10 mm). Results indicated that FIRD was the most cost-effective with the dried mango containing the highest sugar-acid ratio, and when the mango slices thickness was 7 mm and drying at 70 °C, the ascorbic acid content, rehydration ratio, sugar-acid ratio, and energy consumption per unit volume reached 56.84 ± 2.38 mg/100 g, 2.41 ± 0.05, 83.87 ± 2.14, and 0.53 kWh/L. Among three mathematical models, the Page model described the most satisfactory drying behaviour of mango slices in FIRD. This study provides useful information in mango processing industry and FIRD is supposed to be a promising drying method.

Drying Kinetic of Jaboticaba Berries and Natural Fermentation for Anthocyanin-Rich Fruit Vinegar

This study aimed to determine the drying kinetic of jaboticaba berries that were then used for the fermentation of natural fruit vinegar. The drying behavior was fitted well to the thin-layer kinetic model of Midilli et al. in a vacuum oven at 40 °C. Moisture diffusion was the dominant mechanism because two falling rate periods were observed. The effective moisture diffusivity was decreased (2.52 × 10−10 m2/s) after being pretreated with 70% sugar (1.84 × 10−10 m2/s) and 10% salt (6.73 × 10−11 m2/s) solutions. Fresh berry vinegar was found to have higher flavonoids, including anthocyanins, to exhibit higher antiradical and anti-pathogenic microorganism activities. However, the phenolic content in dried berries vinegar was higher, mainly from the bond breaking of tannins and lignins from fruit peel. Some extent of oxidation occurred because of the change in the color index of vinegar samples. The acidity of both vinegars was 3% acetic acid. Headspace GC-MS also detected acetic acid as the major compound (>60%) in the vapor of vinegar samples. A wide range of non-volatile compounds composed of alkaloids, terpenoids, flavonoids, organic acids, and sugar derivatives was detected by UHPLC-TWIMS-QTOFMS. The peak intensity of anthocyanins was reduced by 28−77% in dried berry vinegar. Therefore, it is better to prepare natural fruit vinegar using fresh berries, preserving anthocyanins for high antioxidant capacity.

Effects of Hot Air Drying on Drying Kinetics and Anthocyanin Degradation of Blood-Flesh Peach

The purpose of this study was to explore the drying kinetics, effective moisture diffusivity, activation energy, color variation, and the thermal degradation properties of anthocyanins of blood-flesh peach under hot air drying for the first time. The results showed that the hot air-drying process of blood-flesh peach belongs to reduced-speed drying. The Page model could accurately predict the change of moisture ratio of blood-flesh peach. The effective moisture diffusivity during hot air drying of blood-flesh peach was in the range between 1.62 × 10⁻¹⁰ and 2.84 × 10⁻¹⁰ m²/s, and the activation energy was 25.90 kJ/mol. Fresh samples had the highest content (44.61 ± 4.76 mg/100 g) of total monomeric anthocyanins, and it decreased with the increase of drying temperature. Cyanidin-3-O-glucoside and delphinidin-3-O-galactoside were the main anthocyanins of blood-flesh peach as identified and quantified by UPLC-QqQ-MS. Interestingly, during the drying process, the content of cyanidin-3-O-glucoside increased at the beginning, and then decreased. However, the content of delphinidin-3-O-galactoside kept decreasing during the whole drying process. Considering the drying efficiency, fruit color and quality, 70 °C would be a suitable temperature for drying blood-flesh peach. This research will provide beneficial information for understanding the anthocyanin degradation of blood-flesh peach during drying, and guide the production of high-quality dried products.