Effect of substrate ratios on the simultaneous carbon, nitrogen, sulfur and phosphorous conversions in microbial fuel cells

Anode amendment with kaolin and activated carbon increases electricity generation in a microbial fuel cell

The bacterial anode is a key factor for microbial fuel cell (MFC) performance. This study examined the potential of kaolin (fine clay) to enhance bacteria and conductive particle attachment to the anode. The bio-electroactivity of MFCs based on a carbon-cloth anode modified by immobilization with kaolin, activated carbon, and Geobacter sulfurreducens (kaolin-AC), with only kaolin (kaolin), and a bare carbon-cloth (control) anodes were examined. When the MFCs were fed with wastewater, the MFCs based on the kaolin-AC, kaolin, and bare anodes produced a maximum voltage of 0.6 V, 0.4 V, and 0.25 V, respectively. The maximum power density obtained by the MFC based on the kaolin-AC anode was 1112 mW‧m^-2 at a current density of 3.33 A‧m^-2, 12% and 56% higher than the kaolin and the bare anodes, respectively. The highest Coulombic efficiency was obtained by the kaolin-AC anode (16%). The relative microbial diversity showed that Geobacter displayed the highest relative distribution of 64% in the biofilm of the kaolin-AC anode. This result proved the advantage of preserving the bacterial anode exoelectrogens using kaolin. To our knowledge, this is the first study evaluating kaolin as a natural adhesive for immobilizing exoelectrogenic bacteria to anode material in MFCs.

Improvement of zero waste sustainable recovery using microbial energy generation systems: A comprehensive review

Microbial energy generation systems, i.e., bioelectrochemical systems (BESs) are promising sustainable technologies that have been used in different fields of application such as biofuel production, biosensor, nutrient recovery, wastewater treatment, and heavy metals removal. However, BESs face great challenges such as large-scale application in real time, low power performance, and suitable materials for their configuration. This review paper aimed to discuss the use of BES systems such as conventional microbial fuel cells (MFCs), as well as plant microbial fuel cell (P-MFC), sediment microbial fuel cell (S-MFC), constructed wetland microbial fuel cell (CW-MFC), osmotic microbial fuel cell (OsMFC), photo-bioelectrochemical fuel cell (PBFC), and MFC-Fenton systems in the zero waste sustainable recovery process. Firstly, the configuration and electrode materials used in BESs as the main sources to improve the performance of these technologies are discussed. Additionally, zero waste recovery process from solid and wastewater feedstock, i.e., energy recovery: electricity generation (from 12 to 26,680 mW m^-2) and fuel generation, i.e., H₂ (170 ± 2.7 L^-1 L^-1 d^-1) and CH₄ (107.6 ± 3.2 mL^-1 g^-1), nutrient recovery of 100% (PO₄³-P), and 13-99% (NH₄⁺-N), heavy metal removal/recovery: water recovery, nitrate (100%), sulfate (53-99%), and sulfide recovery/removal (99%), antibiotic, dye removal, and other product recovery are critically analyzed in this review paper. Finally, the perspective and challenges, and future outlook are highlighted. There is no doubt that BES technologies are an economical option for the simultaneous zero waste elimination and energy recovery. However, more research is required to carry out the large-scale application of BES, as well as their commercialization.