Advanced oxidation processes for water and wastewater treatment - Guidance for systematic future research

Predicting the Fate of Bisphenol A During Electrochemical Oxidation: A Simple Semiempirical Method Based on the Concentration Profile of Hydroxyl Radicals

The efficiency of electrochemical advanced oxidation processes (EAOPs) is fundamentally governed by hydroxyl-radical (•OH) generation. While direct experimental measurements of these transient species remain complex and impractical, robust computational methods for predicting their temporal profiles are notably scarce. This work presents a semi-empirical methodology based on H2O2 measuring experiments that enables indirect •OH quantification. We employed a recently developed carbon-based electrode and the priority pollutant bisphenol A (BPA) as the model system. The system achieved 92.3% BPA degradation with 84% mineralization efficiency during 5-h electrooxidation at 15 mA/cm2. Gas chromatography/mass spectrometry (GC/MS) was used for tracking BPA and detection of intermediates. On this basis, we developed a computational model that successfully predicts temporal concentration profiles of all reactive species interacting with •OH, along with degradation kinetics across current densities (10-20 mA/cm2). By incorporating predictions from the Toxicity Estimation Software Tool (T.E.S.T.), the developed model accurately simulates time-dependent evolution of relative toxicity throughout the treatment process. The presented approach has a general character and requires rather simple experimental input to predict and optimize degradation outcome in terms of input concentration, degradation time, current density, and final toxicity. Further modifications of the model would enable widening to other EAOPs systems.

Mitigation of atmospheric and elevated methane by photochemical oxidation at ambient conditions

Methane (CH4) is a potent greenhouse gas and increased mitigation of anthropogenic sources will have immediate effects on global climate. Methane is an inherently inert gas and there is a need for methods capable of mitigating methane from point and non-point sources. Here we introduce a UV based methane oxidation system for mitigation of methane at atmospheric levels and above. Catalyst-free photochemical methane oxidation was achieved at ambient temperature and pressure using air and water vapor as sole reactants. Products included H2, H2O, CH2O and CO2 that have lower radiative forcing potential than methane. The oxidation process rapidly removed ambient methane (2 ppm) to well below atmospheric levels within seconds. >90 % methane removal was obtained for both atmospheric and elevated methane (1-100,000 ppm). Rate coefficients increased with decreasing methane concentrations with half-life of <1 min to 10 min for concentrations ≤10,000 ppm. The environmental applicability of the process for mitigation of anthropogenic methane was demonstrated with thermogenic methane from a gas distribution hub and biogenic methane from a pig stable. The study introduces the fundamentals of a methane scrubber based on rainwater and UV irradiation that may contribute to future removal of methane from point and non-point sources.

Insights into the transformations, antimicrobial activity, and degradation efficiency of a representative carbapenem antibiotic by high-frequency ultrasound hybridized with the (photo)Fenton process

Carbapenems are potent antibiotics that reach sewage systems and then the environment, causing negative impacts. Thus, research on degrading processes to limit the carbapenem discharge in sewage systems is needed. Herein, fundamental aspects of high-frequency ultrasound alone and hybridized with the (photo)Fenton process to deal with a representative carbapenem antibiotic (meropenem, MERO) in water were considered. Initially, the action of ultrasound alone (at 578 kHz) on MERO in distilled water was tested for degradation, resulting in a partial removal (∼53 % after 120 min) and a moderate pseudo-first-order-kinetics (k: 6.3 × 10-3 min-1). Then, to enhance the MERO elimination ferrous ions were added to the ultrasound system, forming the sono-Fenton process. The increase in the ferrous ions concentration from 0 to 5 mg L-1 augmented the rate of MERO degradation (k changed from 6.3 to 15.7 × 10-3 min-1) and diminished the electric energy consumption from 1.22 to 0.49 kWh L-1. Afterward, the MERO treatment by the hybridized sono-photo-Fenton process (i.e., ultrasound combined with Fe2+ and UVA light) was evaluated, showing that the degradation efficiency was higher than by the sono-Fenton or photolysis (indeed, a synergistic index of 1.11 was obtained). Moreover, the sono-photo-Fenton process decreased the antimicrobial activity (against Staphylococcus aureus) after 30 min of treatment, indicating that the by-products did not have antimicrobial activity. The structures of primary by-products, at 50 % of MERO degradation, were elucidated through Fukui indices and LC-MS, finding that the pyrroline ring, β-lactam core, and thioether group on MERO were susceptible to the attacks of generated hydroxyl radicals (HO) and the primary transformations occurred on such moieties of the antibiotic. Finally, the treatment of MERO in synthetic hospital wastewater by the action of the sono-photo-Fenton process was assessed, degrading 36 % of MERO at 60 min of treatment. The results from this research indicated that the hybridized processes could be an alternative to be used in niche applications for treating carbapenem antibiotics even in complex matrices, transforming them into less problematic compounds.

Carbon-based metal oxide nanocomposites for water treatment by photocatalytic processes

The increasing contamination of water by emerging contaminants and the need for more efficient and sustainable treatment methods have prompted the exploration of advanced materials and technologies, with a particular focus on photocatalysis. Carbon-based metal oxide nanocomposites are a promising solution for the treatment of polluted water. This paper aims to review the current state of research on the application of these nanocomposites as photocatalysts for complete water treatment, describing breakthroughs in contaminant removal from 2019 through 2024 and milestones in water disinfection from 2016 through 2024. It includes discussion on the utilization of nanocomposites of Metal Oxides (MOs) with carbon materials to improve photocatalytic efficiency and addresses the advantages and drawbacks of these materials, including electron-hole recombination and agglomeration. The review focuses on the photocatalytic mechanisms of these nanocomposites and highlights the importance of heterostructures formed between metal oxides and carbon materials (e.g., graphene, carbon nanotubes, and carbon quantum dots), which enhance light absorption and hydroxyl radical generation, thereby increasing the efficiency of pollutant degradation and water disinfection. The review describes the properties of different MOs (n-type and p-type), exploring synergies between MOs and carbon materials and discussing the benefits and challenges of their application in wastewater treatment and pathogen inactivation. The review ends with a scientometric analysis of research trends in this field.

Advances in graphene-based nanomaterials for heavy metal removal from water: Mini review

The environment and public health are seriously at risk from the increasing levels of heavy metal (HM) pollution in water bodies, hence efficient remediation techniques must be developed. Unique physicochemical properties of graphene (Gn) such as its enormous surface area, chemical stability, and extraordinary adsorption capabilities have made it a promising candidate for application in various adsorption processes. Recent studies indicate the heavy metal removal capabilities of Gn-based materials such as Gn oxide (GO) and reduced GO (rGO) reach 99% efficiency rates for lead (Pb2+), cadmium (Cd2+), and mercury (Hg2+) through strong electrostatic bonds and metal coordination along with π-π stacking interactions. In addition, the selective nature of Gn-based adsorbents grows better through functionalization because it incorporates thiol, amine, and sulfonic acid groups. The integration of Gn-based materials with metal-organic frameworks (MOFs) combined with magnetic nanoparticles along with bio-based polymers enhances adsorption efficiency and increases stability while offering recyclability features. The conclusion of this study discusses the current obstacles such as cost, scalability, environmental impact, and selectivity and potential future developments for the widespread use of Gn-based adsorbents in water treatment, highlighting the significance of continued research to improve these substances for useful environmental applications. PRACTITIONER POINTS: Graphene-based materials exhibit high capacity for adsorbing various heavy metals, enhancing water purification. Functionalization of graphene improves its ability to selectively target and remove specific heavy metals like mercury and lead. Graphene derivatives can achieve heavy metal removal within minutes, making them efficient for water treatment. Despite high synthesis costs, graphene's superior performance may lower long-term operational costs in wastewater treatment.

Study of methylene blue removal and photocatalytic degradation on zirconia thin films modified with Mn-Anderson polyoxometalates

Recalcitrant pollutants are challenging to degrade during water treatment processes. Methylene blue (MB), a cationic dye, is particularly resistant to degradation and is environmentally persistent. Heterogeneous photocatalysis has emerged as a suitable strategy for removing such pollutants from water. In this work, ZrO2 thin films were modified with Anderson-type Mn-polyoxometalate (MnPOM) ((NH4)3[MnMo6O24H6]), and the efficiency of MB removal from water was studied. ZrO2 was synthesized by a sol-gel method, with thin films deposited using the doctor blade method, and ZrO2 thin films were modified using chemisorption method. The synthesized materials were characterized using SEM, EDX, UV-Vis diffuse reflectance spectroscopy and FTIR. The adsorption kinetics and isotherms for MB were studied for both bare ZrO2 and ZrO2/MnPOM composites. Optical characterization showed a band gap energy of 4.02 eV for bare ZrO2, while the ZrO2/MnPOM composite exhibited a band gap of 3.7 eV. Furthermore, ZrO2 showed lower MB removal capacity (∼8%) than ZrO2/MnPOM thin films (∼29%). The isothermal adsorption studies indicated that MB adsorption onto both bare ZrO2 and ZrO2/MnPOM followed the Langmuir adsorption model (qm = 20.6 mg g-1 for ZrO2 and qm = 62.9 mg g-1 for ZrO2/MnPOM). Furthermore, the adsorption kinetics of MB were well described by a pseudo-second-order model. Photocatalytic testing under UV irradiation showed an apparent rate constant (kap) of 2 × 10-3 min-1 for bare ZrO2 and a value of kap 5.4 × 10-3 min-1 for ZrO2/MnPOM after 100 minutes. TD-DFT calculations revealed an LMCT interaction between the ZrO2 nanoparticle and the MnPOM, which likely contributes to the enhanced photocatalytic activity of the ZrO2/MnPOM composite.

Catalytic degradation of organic pollutants in aqueous systems: A comprehensive review of peroxyacetic acid-based advanced oxidation processes

Peroxyacetic acid (PAA)-based advanced oxidation processes (AOPs) have emerged as a promising treatment method to decontaminate organic pollutants. This review thoroughly evaluated the use of PAA-based AOPs, including their synthesis techniques, physicochemical features, and reaction pathways with pollutants. It also illustrated two primary channels: free radical pathways and non-radical pathways during the PAA activation processes and introduced various methods for activating PAA, including energy radiation, transition metal catalysis, and carbon catalysis. Additionally, this review comprehensively presented the advancements in research on PAA-based AOPs for wastewater treatment. Furthermore, the influences of key parameters on system performance, such as pH, catalyst loading, PAA dosage, and interfering species, were summarized. By critically evaluating mechanisms, performance, and prospects, this review served as a valuable resource for researchers and practitioners involved in the development and implementation of PAA-based AOPs for sustainable water remediation.

Bioaerogels from biomass waste: An alternative sustainable approach for wastewater treatment

The generation of municipal solid waste is projected to increase from 2.1 billion tonnes in 2023 to 3.8 billion tonnes by 2050. In 2020, the direct global cost of managing this waste was approximately USD 252 billion. When considering additional hidden costs-such as those arising from pollution, adverse health effects, and climate change due to inadequate waste disposal-the total cost escalates to USD 361 billion. Without significant improvements in waste management practices, this figure could nearly double by 2050, reaching an estimated USD 640.3 billion annually. Among municipal solid waste, biowaste accounts for roughly 44 % of the global municipal solid waste, translating to about 840 million tonnes annually. They are widely accessible and economical, offering a cost-effective alternative to traditional treatment materials. Transforming biomass waste into carbon-based materials (e.g., bioaerogels) is a sustainable practice that reduces waste and repurposes it for environmental remediation. This approach not only decreases the volume of waste directed to landfills and mitigates harmful greenhouse gas emissions from decomposition but also aligns with the principles of a circular economy. Furthermore, it supports sustainable development goals by addressing issues such as water scarcity and pollution while promoting waste valorization and resource efficiency. The unique properties of bioaerogels-including their porosity, multi-layered structure, and chemical adaptability-make them highly effective for the remediation of different water pollutants from aquatic bodies. This review article comprehensively delves into multifaceted wastewater remediation strategies -based bioaerogels such as coagulation and flocculation, advanced oxidation processes, membrane filtration, catalytic processes, water disinfection, Oil-water separation, biodegradation, and adsorption. Additionally, it examines different mechanisms of interaction such as surface adsorption, electrostatic interaction, van der Waals forces, ion exchange, surface precipitation, complexation, pore-filling, hydrophobic interactions, and π-π stacking. Moreover, it conducts an integrated techno-economic evaluation to assess their feasibility in wastewater treatment. By valorizing biomass waste, a closed-loop system can be established, where waste is transformed into valuable bioaerogels. This approach not only addresses challenges related to effluent pollution but also generates economic, environmental, and social benefits. Ultimately, the review underscores the transformative potential of bioaerogels in wastewater treatment, emphasizing their crucial role in supporting long-term environmental goals and advancing the principles of resource circularity.

Pre-treatment of composite industrial wastewater by Fenton and electro-Fenton oxidation processes

The present study aims to characterize three industrial wastewater samples collected from petrochemical, food and beet sugar industries to determine the pollution potential and select the appropriate pre-treatment approach. According to the biodegradability profile of the multi-sourced mixed (composite) sample, the advanced oxidation process (AOPs) namely, Fenton (F) and Electro-Fenton (EF) were adopted as pre-treatment techniques and the operating parameters such as time, type of electrodes, pH, voltage, iron and H2O2 concentrations were critically examined. Analysis of Variance (ANOVA) was conducted to compare the performance efficiency of F& EF AOPs for treating the composite samples and the total operating costs for both approaches were assessed. The results revealed that, the initial values of the composite sample were 7.11, 19.2, 32.6, 19.3, 937, 1512, 860, 3.9, 2110 and 2.34 for pH, Total Dissolved Solids (TDS), Electrical Conductivity (EC), Salinity, BOD, COD, Oil and grease (O&G), Total Phosphorous (TP), Total Suspended Solids (TSS) and Total Kjeldahl Nitrogen (TKN), respectively. In addition, EF process achieved more removal efficiency for COD, O&G, BOD, TSS, and TKN (84.3%, 69%, 85%, 72% and 71.27%) compared to Fenton which displayed 78.43%, 66%, 69%, 70.1%, and 61%, respectively. Moreover, there are statistically significant differences (p < 0.05) between the initial and final (pretreated) values of the composite industrial wastewater for the addressed parameters and EF was significantly (p < 0.05) more effective than F process. The total operating costs were 3.117 and 2.063$ for F and EF, respectively, which confirmed that EF is more efficient and cost effective than F process. It was concluded that electro-Fenton process is favorable, eco-friendly and cost-effective option for pretreating real complicated multi-sourced industrial wastewater. The present study demonstrated a new avenue for achieving efficient management of industrial wastewater generated from similar industries.

Persulfate activation by biochar and iron: Effect of chloride on formation of reactive species and transformation of N,N-diethyl-m-toluamide (DEET)

Fenton-like processes using persulfate for oxidative water treatment and contaminant removal can be enhanced by the addition of redox-active biochar, which accelerates the reduction of Fe(III) to Fe(II) and increases the yield of reactive species that react with organic contaminants. However, available data on the formation of non-radical or radical species in the biochar/Fe(III)/persulfate system are inconsistent, which limits the evaluation of treatment efficiency and applicability in different water matrices. Based on competition kinetics calculations, we employed different scavengers and probe compounds to systematically evaluate the effect of chloride in presence of organic matter on the formation of major reactive species in the biochar/Fe(III)/persulfate system for the transformation of the model compound N,N‑diethyl-m-toluamide (DEET) at pH 2.5. We show that the transformation of methyl phenyl sulfoxide (PMSO) to methyl phenyl sulfone (PMSO2) cannot serve as a reliable indicator for Fe(IV), as previously suggested, because sulfate radicals also induce PMSO2 formation. Although the formation of Fe(IV) cannot be completely excluded, sulfate radicals were identified as the major reactive species in the biochar/Fe(III)/persulfate system in pure water. In the presence of dissolved organic matter, low chloride concentrations (0.1 mM) shifted the major reactive species likely to hydroxyl radicals. Higher chloride concentrations (1 mM), as present in a mining-impacted acidic surface water, resulted in the formation of another reactive species, possibly Cl2•-, and efficient DEET degradation. To tailor the application of this oxidation process, the water matrix must be considered as a decisive factor for reactive species formation and contaminant removal.

MnCe-based catalysts for removal of organic pollutants in urban wastewater by advanced oxidation processes - A critical review

With Advanced oxidation processes (AOPs) widely promoted, MnCe-based catalysts have received extensive attention under the advantages of high efficiency, stability and economy for refractory organic pollutants present in urban wastewater. Driven by multiple factors such as environmental pollution, technological development, and policy promotion, a systematic review of MnCe-based catalysts is urgently needed in the current research situation. This research provides a critical review of MnCe-based catalysts for removal of organic pollutants in urban wastewater by AOPs. It is found that co-precipitation and sol-gel methods are more appropriate methods for catalyst preparation. Among a host of influence factors, catalyst composition and pH are crucial in the catalytic oxidation processes. The synergistic effect of the free radical pathway and surface catalysis results in better pollutants degradation. It is more valuable to utilize multiple systems for oxidation (e.g., photo-Fenton technology) to improve the catalytic efficiency. This review provides theoretical guidance for MnCe-based catalysts and offers a reference direction for future research in the AOPs of organic pollutants removal from urban wastewater.

Unveiling the photocatalytic potential of graphitic carbon nitride (g-C3N4): a state-of-the-art review

Graphitic carbon nitride (g-C3N4)-based materials have emerged as promising photocatalysts due to their unique band structure, excellent stability, and environmental friendliness. This review provides a comprehensive and in-depth analysis of the current state of research on g-C3N4-based photocatalysts. The review summarizes several strategies to improve the photocatalytic performance of pristine g-C3N4, e.g., by creating heterojunctions, doping with non-metallic and metallic materials, co-catalyst loading, tuning catalyst morphology, metal deposition, and nitrogen-defect engineering. The review also highlights the various characterization techniques employed to elucidate the structural and physicochemical features of g-C3N4-based catalysts, as well as their applications of in photocatalytic degradation and hydrogen production, emphasizing their remarkable performance in pollutants' removal and clean energy generation. Furthermore, this review article investigates the effect of operational parameters on the catalytic activity and efficiency of g-C3N4-based catalysts, shedding light on the key factors that influence their performance. The review also provides insights into the photocatalytic pathways and reaction mechanisms involving g-C3N4 based photocatalysts. The review also identifies the research gaps and challenges in the field and presents prospects for the development and utilization of g-C3N4-based photocatalysts. Overall, this comprehensive review provides valuable insights into the synthesis, characterization, applications, and prospects of g-C3N4-based photocatalysts, offering guidance for future research and technological advancements in this rapidly growing field.