A new colorimetric and fluorescent chemosensor based on Schiff base-phenyl-crown ether for selective detection of Al3+ and Fe3+

Fluorophore-quencher complexes (Cu2+/Al3+) of coumarin Schiff bases as chemosensors for the detection of L-glutamic acid and L-arginine: in vitro and in vivo studies

This study reports the development of new probes RR1 ((1E)-1-(1-(6-bromo-2-oxo-2H-chromen-3-yl)ethylidene)ethyl thiosemicarbazone) and RR2 ((1E)-1-(1-(6-bromo-2-oxo-2H-chromen-3-yl)ethylidene)phenyl thiosemicarbazone), which selectively showed fluorescence turn 'OFF' response towards Cu2+ and Al3+. Further, complexes of RR1-Cu2+ and RR2-Al3+ acted as chemosensors for the detection of L-amino acids. RR1-Cu2+ selectively detected L-arginine (fluorescence turn 'ON'), and RR2-Al3+ selectively detected L-glutamic acid (fluorescence turn 'ON'). The existence of the fluorophore-quencher complexes RR1-Cu2+ and RR2-Al3+ was confirmed by theoretical studies. Further, the chemosensors RR1-Cu2+ and RR2-Al3+ have three possible structural isomers (RR1-Cu2+-L-arginine - A, B and C) and (R2-Al3+-L-glutamic acid - D, E and F), as confirmed by theoretical studies. In vitro bio-imaging of the probes (RR1 and RR2), complexes (RR1-Cu2+ and RR2-Al3+) and complexes associated with L-arginine (RR1-Cu2+-L-arginine) and L-glutamic acid (R2-Al3+-L-glutamic acid) was performed in the MDA-MB-231 cell line using their IC50 concentrations. In addition, in vivo live cell imaging studies were conducted using C. elegans as the model organism.

Oxadiazole Schiff Base as Fe3+ Ion Chemosensor: "Turn-off" Fluorescent, Biological and Computational Studies

Compound, (E)-5-(4-((thiophen-2-ylmethylene)amino)phenyl)-1,3,4-oxadiazole-2-thiol (3) was synthesized via condensation reaction of 5-(4-aminophenyl)-1,3,4-oxadiazole-2-thiol with thiophene-2-carbaldehyde in ethanol. For the synthesis and structural confirmation the FT-IR, ¹H, ¹³C-NMR, UV-visible spectroscopy, and mass spectrometry were carried out. The long-term stability of the probe (3) was validated by the experimental as well as theoretical studies. The sensing behaviour of the compound 3 was monitored with various metal ions (Ca²⁺, Cr³⁺, Fe³⁺, Co²⁺, Mg²⁺, Na⁺, Ni²⁺, K⁺) using UV- Vis. and fluorescence spectroscopy techniques by various methods (effect of pH and density functional theory) which showing the most potent sensing behaviour with iron. Job's plot analysis confirmed the binding stoichiometry ratio 1:1 of Fe³⁺ ion and compound 3. The limit of detection (LOD), the limit of quantification (LOQ), and association constant (K_a) were calculated as 0.113 µM, 0.375 µM, and 5.226 × 10⁵ respectively. The sensing behavior was further confirmed through spectroscopic techniques (FT-IR and ¹H-NMR) and DFT calculations. The intercalative mode of binding of oxadiazole derivative 3 with Ct-DNA was supported through UV-Vis spectroscopy, fluorescence spectroscopy, viscosity, cyclic voltammetry, and circular dichroism measurements. The binding constant, Gibb's free energy, and stern-volmer constant were find out as 1.24 × 10⁵, -29.057 kJ/mol, and 1.82 × 10⁵ respectively. The cleavage activity of pBR322 plasmid DNA was also observed at 3 × 10^-5 M concentration of compound 3. The computational binding score through molecular docking study was obtained as -7.4 kcal/mol. Additionally, the antifungal activity for compound 3 was also screened using broth dilution and disc diffusion method against C. albicans strain. The synthesized compound 3 showed good potential scavenging antioxidant activity against DPPH and H₂O₂ free radicals.

Schiff Bases: A Versatile Fluorescence Probe in Sensing Cations

Metal cations such as Zn²⁺, Al³⁺, Hg²⁺, Cd²⁺, Sn²⁺, Fe²⁺, Fe³⁺ and Cu²⁺ play important roles in biology, medicine, and the environment. However, when these are not maintained in proper concentration, they can be lethal to life. Therefore, selective sensing of metal cations is of great importance in understanding various metabolic processes, disease diagnosis, checking the purity of environmental samples, and detecting toxic analytes. Schiff base probes have been largely used in designing fluorescent sensors for sensing metal ions because of their easy processing, availability, fast response time, and low detection limit. Herein, an in-depth report on metal ions recognition by some Schiff base fluorescent sensors, their sensing mechanism, their practical applicability in cell imaging, building logic gates, and analysis of real-life samples has been presented. The metal ions having biological, industrial, and environmental significance are targeted. The compiled information is expected to prove beneficial in designing and synthesis of the related Schiff base fluorescent sensors.

Statistical optimization of silver nanoparticle synthesis by green tea extract and its efficacy on colorimetric detection of mercury from industrial waste water

For the optimization of silver nanoparticle production, a central composite design was used with three parameters: AgNO₃ concentration, green tea extract concentration, and temperature at three different levels. The size of the synthesized silver nanoparticle, its UV absorbance, zeta potential, and polydispersity index were set as the response parameters. Silver nanoparticles obtained in the optimization process were characterized and its efficacy on colorimetric detection of mercury was evaluated. The response variables were significant for the factors analyzed, and each variable had a significant model (P < 0.05). The ideal conditions were: 1 mM AgNO₃, 0.5% green tea extract, and 80 °C temperature. To analyze the produced AgNPs under certain ideal conditions, Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD) were used. The UV-visible spectra of AgNPs revealed an absorption maxima at 424 nm. The XRD pattern reveals a significant diffraction peak at 38.25°, 44.26°, 64.43°, and 77.49°, which corresponds to the (111), (200), (220), and (311) planes of polycrystalline face-centered cubic (fcc) silver, respectively. The TEM and SEM analyses confirmed that the particles were spherical, and dynamic light scattering study determined the average diameter of AgNPs to be 77.4 nm. The AgNPs have a zeta potential of -62.6 mV, as determined by the zeta sizer analysis. The AgNPs detects mercury at a micromolar concentration. Furthermore, the environmentally friendly generated AgNPs were used to detect mercury in a colorimetric method that was effectively employed for analytical detection of Hg²⁺ ions in an aqueous environment for the purpose of practical application.

A naphthalene-based azo armed molecular framework for selective sensing of Al3+

A naphthalene-based azo armed molecular derivative was synthesized for sensing of Al3+ and cell imaging studies. The fluorescence enhancement is caused by restricted CN isomerization, CHEF on, and PET-off processes.

Monitoring of Fe (II) ions in living cells using a novel quinoline-derived fluorescent probe

Physiologically, Fe(III) and Fe(II) is the most important redox pairs in a variety of biological and environmental procedures with its capability of transition. The detection of physiological iron, especially Fe(II), has become the recent research focus of investigations on revealing the mechanism of iron-related metabolism. In this work, we exploited a novel quinoline-derived fluorescent probe, YTP, for the detection of Fe(II). It could monitor the level of Fe(II) with a linear range of 0-2.0 equivalent and the detection limit of 0.16 µM. High selectivity from other analytes including Fe(III) and steadiness for over 24 h confirmed the practicability of YTP. YTP was further applied in real buffer systems and in cellular imaging. The probe could achieve the semi-quantitative monitoring of Fe(II) in living cells. This work provided a potential implement for the detection of Fe(II), and raised important information for further researches on the redox pairs of iron, in mechanism and in practice.

Response of a Zn(II)-based metal-organic coordination polymer towards trivalent metal ions (Al3+, Fe3+ and Cr3+) probed by spectroscopic methods

A new zinc-based two-dimensional coordination polymer, [Zn(5-AIP)(Ald-4)]·H2O (5-AIP = 5-amino isophthalate, Ald-4 = aldrithiol-4), 1, has been synthesized at room temperature by the layer diffusion technique. Single-crystal X-ray diffraction analysis of 1 showed a two-dimensional bilayer structure. An aqueous suspension of 1 upon excitation at 300 nm displayed an intense blue emission at 403 nm. The luminescence spectra were interestingly responsive and selective to Al3+, Cr3+ and Fe3+ ions even in the presence of other interfering ions. The calculated detection limits for Al3+, Cr3+ and Fe3+ were 0.35 μM ([triple bond, length as m-dash]8.43 ppb), 0.46 μM ([triple bond, length as m-dash]22.6 ppb) and 0.30 μM ([triple bond, length as m-dash]15.85 ppb), respectively. Notably, with the cumulative addition of Al3+ ions, the luminescence intensity at 403 nm decreased steadily with a gradual red shift up to 427 nm. Afterward, this red shifted peak showed a turn-on effect upon further addition of Al3+ ions. On the other hand, for Cr3+ and Fe3+ ions, there was only drastic luminescence quenching and a large red shift up to 434 nm. This indicated the formation of a complex between 1 and these metal ions, which was also supported by the UV-Visible absorption spectra of 1 that showed the appearance of a new band at 280 nm in the presence of these three metal ions. The FTIR spectra revealed that these ions interacted with the carboxylate oxygen atom of 5-AIP and the nitrogen atom of the Ald-4 ligand in the structure. The luminescence lifetime decay analysis manifested that a charge-transfer type complex was formed between 1 and Cr3+ and Fe3+ ions that resulted in huge luminescence quenching due to the efficient charge transfer involving the vacant d-orbitals, whereas for Al3+ ions having no vacant d-orbital, turn-on of luminescence occurred because of the increased rigidity of 1 upon complexation.

Novel luminescent Schiff's base derivative with an azo moiety for ultraselective and sensitive chemosensor of Fe3+ ions

Chemosensors with ultrasensing capabilities for detection of metal ions have received particular attention when using luminescent organic compounds. Even though hundreds of chemosensor agents have been reported for Fe³⁺ ion sensing, the designs of those molecules have been complicated and time consuming, in addition to having limited application for aquatic samples due to their poor hydrophilicity. Here, we synthesized a novel azo-imine derivative (L2) that showed ultrasensitive and selective sensing for Fe³⁺ ions. L2 exhibited ultraselective detection of Fe³⁺ ions with a turn-off of its emission intensity at 341 nm in H₂ O:MeOH (4:1 v/v) aqueous medium. This quenching phenomenon was in good agreement with its colour change from orange-yellowish to colourless. Its capability was shown due to its very low limit of detection and limit of quantification values of 0.31 and 1.04 μM, respectively. The interference study showed that L2 is ultraselective for the detection of Fe³⁺ ions without a significant reduction in its sensing capability even in competitive metal mixtures. Furthermore, direct Fe³⁺ quantification of tap and drinking water showed that L2 gave good recovery percentages. These findings demonstrated that the Schiff's base with an azo fluorophore derivative is a potential chemosensor agent for Fe³⁺ ions sensing applications in aqueous media.

"Turn-on" benzophenone based fluorescence and colorimetric sensor for the selective detection of Fe2+ in aqueous media: Validation of sensing mechanism by spectroscopic and computational studies

A diaminobenzophenone Schiff base derived probe 1, was synthesized and structure elucidation was carried out by spectroscopic studies viz., FT-IR, UV-vis, ¹H, and ¹³C NMR and mass spectrometry. The sensing phenomenon with different metal ions (Cr³⁺, Mn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺) was investigated by employing absorption and fluorescence titrations, which demonstrated that probe 1 exhibited selective fluorescent sensing behavior towards Fe²⁺ ion among various other metal ions. The porobes selceteclivity towards Fe²⁺ was also examined by colorimetric assay which revealed a change in the color from light yellow to brown upon addition of Fe²⁺ ion. A remarkable increase in the fluorescence intensity of probe 1 was observed towards Fe²⁺ ion, which was found to be associated with the inhibition of photoinduced electron-transfer (PET) and CN isomerization processes, respectively. The chemosensor exhibited an association constant value of 6.173 × 10⁷ M^-2 as determined by using non-linear least square fit data. Job's plot calculated the binding stoichiometry, and the sensing phenomenon of Fe²⁺ towards the probe was further supported by Density Functional Theory (DFT) calculations and ¹H NMR studies. The detection limit of probe 1 was found to be 0.0363 µM, which is below the permissible limits according to the WHO guideline (5 μM) for Fe²⁺ ions in the drinking water. Furthermore, the practical application of probe 1 was studied by analyzing the content of Fe²⁺ in different water samples.

Rationally assembled nonanuclear lanthanide clusters: Dy9 displays slow relaxation of magnetization and Tb9 serves as luminescent sensor for Fe3+, CrO42− and Cr2O72−

The utilization of a Schiff base ligand 2-((2-hydroxy-4-methoxy-benzylideneamino)methyl)phenol (H₂L) afforded five nonanuclear lanthanide(iii) clusters. Dy₉ displays slow relaxation of magnetization and Tb₉ serves as luminescent sensor for Fe³⁺, CrO₄²⁻ and Cr₂O₇²⁻.