A dual-response fluorescent probe for Al3+ and Zn2+ in aqueous medium based on benzothiazole and its application in living cells

Turn-on detection of Al3+ and Zn2+ ions by a NSN donor probe: reversibility, logic gates and DFT calculations

An efficient dual functional naphthalene-derived Schiff base NpSb probe has been synthesised and evaluated for its fluorescence and chromogenic response towards metal ions. The NpSb probe was capable of selectively recognising Al3+ and Zn2+ ions when they were excited at the same wavelength in an aqueous organic solvent system. Almost non-fluorescent NpSb displayed a 'turn-on' fluorescence response when treated with Zn2+ (λem = 416 nm) and Al3+ (λem = 469 nm) ions due to the chelation-enhanced fluorescence (CHEF) effect. The limit of detection (LoD) values for Al3+ and Zn2+ have been determined to be 38.0 nM and 43.0 nM, respectively. The binding constants for Al3+ and Zn2+ were found to be 1.18 × 106 M-1 and 3.5 × 105 M-1, respectively. The NpSb also acted as a colorimetric sensor for Al3+ as the colour of the probe's solution turned to pale green from colourless upon Al3+ addition. The binding mechanism between NpSb and Zn2+/Al3+ was supported by the ESI-MS, Job's plot, NMR, and DFT studies. The reversibility experiments were carried out with an F- ion and EDTA with the development of corresponding logic gates. Moreover, NpSb could be applied to detect Al3+ ions in real samples such as tap water, distilled water and soil samples.

A novel dual-function probe for fluorescent turn-on recognition and differentiation of Al3+ and Ga3+ and its application

In this study, a novel dual-function probe BMP based on benzothiazole was easily synthesized and characterized through common optical technique. In the system consisting of DMF/H₂O (v/v, 2/3), probe BMP showed azure and blue-green to Al³⁺ and Ga³⁺, respectively. Besides, the binding ratios of BMP to Al³⁺ and Ga³⁺ were determined as 1:1, which confirmed by Job's plot. Furthermore, for Al³⁺ and Ga³⁺, the limit of detection (LOD) was determined to be 1.51 × 10^-6 M and 4.28 × 10^-6 M, respectively. Moreover, it was worth noting that BMP showed good performances in paper colorimetry, cell phone colorimetric identification and cell imaging.

A "Turn-On" fluorescent probe for detection and removal of Zn2+ in aqueous and its application in living cells

Using 3-hydroxy-2-naphthoic acid hydrazine and 4-(diethylamino) salicylaldehyde. as raw materials, compound L with an acylhydrazones structure was synthesized. The structure of compound L was characterized by nuclear magnetic resonance spectroscopy, X-ray single crystal diffraction, Fourier transform infrared spectroscopy, and mass spectrometry. The results show that Compound L can quickly and selectively recognize zinc ions in the H₂O/DMSO (V:V = 3:7) solvent system. After that, the spectral performance of probe L was studied by fluorescence spectroscopy and UV-vis spectroscopy. The results show that the combination with Zn²⁺ can significantly enhance the fluorescence intensity of probe L while being almost unaffected by other coexisting ions. After that, Job's curve method, nuclear magnetic titration analysis, and mass spectrometry were used to study the binding mechanism of probe L and Zn²⁺. The results showed that probe L coordinated with Zn²⁺ is 1:1. The linear equations of different concentrations of Zn²⁺ and fluorescence intensity were obtained by fitting, and the detection limit of probe L for Zn²⁺ was determined to be 6.75 × 10^-9 mol/L. The experimental study of standard addition and recovery showed that probe L could be used for the quantitative detection of Zn²⁺ in natural water samples. After that, we prepared L-doped sodium alginate hydrogel (SAL). The research results show that SAL has obvious adsorption capacity for Zn²⁺ in solution, and the color change before and after adsorption can be easily distinguished by the naked eye under ultraviolet light. SEM-EDS study showed that the microscopic morphology and composition of SAL changed significantly before and after adsorption. This fluorescent probe can be used for detection and removal of Zn²⁺ in aqueous solution. Also, probe L is effective for sensing for zinc (II) in living tumor cells. Overall, this work allows us to obtain a great potential to be applied to detect and remove Zn²⁺.

Synthetic Approaches to Biologically Active C-2-Substituted Benzothiazoles

Numerous benzothiazole derivatives are used in organic synthesis, in various industrial and consumer products, and in drugs, with a wide spectrum of biological activity. As the properties of the benzothiazole moiety are strongly affected by the nature and position of substitutions, in this review, covering the literature from 2016, we focus on C-2-substituted benzothiazoles, including the methods of their synthesis, structural modification, reaction mechanisms, and possible pharmacological activity. The synthetic approaches to these heterocycles include both traditional multistep reactions and one-pot atom economy processes using green chemistry principles and easily available reagents. Special attention is paid to the methods of the thiazole ring closure and chemical modification by the introduction of pharmacophore groups.

Novel Benzothiazole-Based Highly Selective Ratiometric Fluorescent Turn-On Sensors for Zn2+ and Colorimetric Chemosensors for Zn2+, Cu2+, and Ni2+ Ions

Metal ions play a very important role in environmental as well as biological fields. The detection of specific metal ions at a minute level caught much attention, and hence, several probes are available in the literature. Even though benzothiazole-based molecules have a special place in the medicinal field, only very few chemosensors are reported based on this moiety. The current work describes the design and synthesis of the benzothiazole-based chemosensor for a highly selective and sensitive detection of biologically important metal ions such as Zn²⁺, Cu²⁺, and Ni²⁺. The sensing studies of compound-1 showed a ratiometric as well as colorimetric response toward Zn²⁺, Cu²⁺, and Ni²⁺ ions and color changes from colorless to yellow and is found to be insensitive toward various metal ions (Cd²⁺, Cr³⁺, Mn²⁺, Pb²⁺, Ba²⁺, Al³⁺, Ca²⁺, Fe²⁺, Fe³⁺, Mg²⁺, K⁺, and Na⁺). Further, compound-1 exhibited ratiometric as well as turn-on-enhanced fluorescence response toward Zn²⁺ ions and turn off response for Cu²⁺ and Ni²⁺ ions. The Job plots revealed that the binding stoichiometry of compound-1 and metal ions is 2:1. The detection limits were found to be 0.25 ppm for Zn²⁺, while it was 0.30 ppm and 0.34 ppm for Ni²⁺ and Cu²⁺, respectively. In addition, density functional theory results strongly support the colorimetric response of metals, and the reversibility studies suggested that compound-1 can be used as a powerful chemosensor for the detection of Zn²⁺, Cu²⁺, and Ni²⁺ ions. The bioimaging data illustrated that compound-1 is a very effective ratiometric sensor for Zn²⁺ ions in live cells.

Discriminatory behavior of a rhodamine 6G decorated mesoporous silica based multiple cation sensor towards Cu2+ and Hg2+vis-à-vis Al3+, Cr3+ and Fe3+: selective removal of Cu2+ and Hg2+ from aqueous media

Selective identification of metal ions as well as their removal is possible when a sensing unit is anchored to a solid support. In this paper, functionalized mesoporous silica with a pendant rhodamine 6G moiety (R6FMS) has been obtained by successive grafting of an aldehyde derivative of bisphenol A followed by rhodamine 6G over a 3-aminopropyl anchored mesoporous silica framework. The materials have been characterized by powder X-ray diffraction, nitrogen sorption and electron microscopy studies, FT-IR and solid state MAS NMR spectral studies, and thermal analysis. In ethanol, the colorless silica material gives pink coloration in the presence of Al3+, Cr3+, Fe3+ and Cu2+ which is also clearly evident from the generation of an absorption peak at 525 nm. Upon excitation at 500 nm, the fluorescence intensity of the probe increases by 36-, 17-, 40- and 89-fold in the presence of Al3+, Cr3+, Fe3+ and Cu2+ ions, respectively. This suggests that R6FMS is a colorimetric and fluorescent chemosensor for these cations in ethanol. However, when the solvent is changed from ethanol to water, it becomes a selective chemosensor only for Cu2+ and Hg2+, by the generation of a pink color and strong fluorescence at ca. 550 nm, thereby discriminating the trivalent cations. Cations induce the opening of the spirolactam ring resulting in pink coloration and strong fluorescence. The quantum yield and lifetime of the probe have been increased considerably in the presence of these cations in ethanol as well as in aqueous media. The detection limit values for these cations range from 10-6 to 10-8 M. R6FMS has been used to remove Hg2+ and Cu2+ from their aqueous solution with a maximum adsorption capacity of 35 mg g-1 and 148 mg g-1 for Cu2+ and Hg2+, respectively.

A 2-Hydroxy-1-naphthaldehyde Schiff Base for Turn-on Fluorescence Detection of Zn2+ Based on PET Mechanism

Zinc ion is closely related to human health. Its content in human body is small, while the effect is large. However, it is not the more the better, must be in a scientific balance. Therefore, it is significant to the rapid detection of Zn²⁺ in the environment and organism. Herein, a fluorescent probe based on 2-hydroxy-1-naphthalene formaldehyde and furan-2-carbohydrazide was conveniently synthesized via Schiff base reaction. And this probe has been successfully applied to the accurate and quantitative detection of Zn²⁺ in real samples, showing turn on fluorescence, good selectivity, very low detection limit, real time response and reusability. In addition, this probe has the potential application to trace Zn²⁺ in living cells with low cytotoxicity.