Enzymatic degradation of Antheraea pernyi silk fibroin 3D scaffolds and fibers

A photo-thermal dual crosslinked chitosan-based hydrogel membrane for guided bone regeneration

Alveolar bone defects caused by inflammation or trauma jeopardize patients' oral functions. Guided bone regeneration (GBR) is widely used in repairing periodontal tissue, with barrier membranes play a crucial role in preserving the bone regeneration space. In this study, an injectable dual-crosslinked hydrogel was developed to improve the existing barrier membranes in flexibility and functionality. The hydrogel matrix, composed of methacrylated carboxymethyl chitosan (CMCS) reinforced with robust silk fibroin (SF), was further functionalized with bioactive glass (BG) particles to promote bone regeneration. The pre-gel solution achieved a fast-curing process under visible light and at body temperature. Further, the composite hydrogels presented good biocompatibility, biodegradability, resilience, alongside in vitro barrier effect against human gingival fibroblasts (HGFs). It significantly enhanced osteogenic differentiation and angiogenesis of bone marrow mesenchymal stem cells (BMSCs), facilitate the tube formation of human umbilical vein endothelial cells (HUVECs), and inhibit Staphylococcus aureus and Porphyromonas gingivalis. In a rat skull defect model, the osteogenic performance of hydrogels was comparable with that of collagen membranes (Bio-Gide®). Overall, this in-situ gel-forming barrier material served as a stable carrier for bioactive ions and a biomineralized scaffold for tissue ingrowth, supporting the enhancement of GBR technique.

Fabrication of biologically inspired electrospun collagen/silk fibroin/bioactive glass composited nanofibrous to accelerate the treatment efficiency of wound repair

A triple-layer matrix Collagen/Silk fibroin/Bioactive glass composited Nanofibrous was fabricated by linking electrospinning and freeze-drying systems, this typical three layered composite with a nanofibrous fragment as the key (top) layer, middle portion as inferior, and a spongy porous fragment as the third (bottom) deposit to develop the synergistic effect of composite materials resultant to physical and biological performances. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy were used to assess the final material's physicochemical properties (SEM). The triple-layer matrix had a nanofibrous and porous structure, which has qualities including high porosity, swelling, and stability, which are important in soft-tissue engineering. NIH 3 T3 fibroblast and humanoid keratinocyte (HaCaT) cell lines were also used to investigate the matrix's in vitro biological and fluorescent capabilities, which showed excellent cell adherence and proliferation across the composite layers. The synergistic arrangement of nanofibrous substantial deposition onto collagenous with silk fibroin candidates has therefore proven effective in the construction of a tri-layer matrix for skin-tissue-engineering applications.

Nonmulberry silk fibroin-based biomaterials: Impact on cell behavior regulation and tissue regeneration

Silk fibroin (SF) is a promising biomaterial due to its good biocompatibility, easy availability, and high mechanical properties. Compared with mulberry silk fibroin (MSF), nonmulberry silk fibroin (NSF) isolated from typical nonmulberry silkworm silk exhibits unique arginine-glycine-aspartic acid (RGD) sequences with favorable cell adhesion enhancing effect. This inherent property probably makes the NSF more suitable for cell culture and tissue regeneration-related applications. Accordingly, various types of NSF-based biomaterials, such as particles, films, fiber mats, and 3D scaffolds, are constructed and their application potential in different biomedical fields is extensively investigated. Based on these promising NSF biomaterials, this review firstly makes a systematical comparison between the molecular structure and properties of MSF and typical NSF and highlights the unique properties of NSF. In addition, we summarize the effective fabrication strategies from degummed nonmulberry silk fibers to regenerated NSF-based biomaterials with controllable formats and their recent application progresses in cell behavior regulation and tissue regeneration. Finally, current challenges and future perspectives for the fabrication and application of NSF-based biomaterials are discussed. Related research and perspectives may provide valuable references for designing and modifying effective NSF-based and other natural biomaterials. STATEMENT OF SIGNIFICANCE: There exist many reviews about mulberry silk fibroin (MSF) biomaterials and their biomedical applications, while that about nonmulberry silk fibroin (NSF) biomaterials is scarce. Compared with MSF, NSF exhibits unique arginine-glycine-aspartic acid sequences with promising cell adhesion enhancing effect, which makes NSF more suitable for cell culture and tissue regeneration related applications. Focusing on these advanced NSF biomaterials, this review has systematically compared the structure and properties of MSF and NSF, and emphasized the unique properties of NSF. Following that, the effective construction strategies for NSF-based biomaterials are summarized, and their recent applications in cell behavior regulations and tissue regenerations are highlighted. Furthermore, current challenges and future perspectives for the fabrication and application of NSF-based biomaterials were discussed.

Structure-Property Relationship Based on the Amino Acid Composition of Recombinant Spider Silk Proteins for Potential Biomedical Applications

Improving biomaterials by engineering application-specific and adjustable properties is of increasing interest. Most of the commonly available materials fulfill the mechanical and physical requirements of relevant biomedical applications, but they lack biological functionality, including biocompatibility and prevention of microbial infestation. Thus, research has focused on customizable, application-specific, and modifiable surface coatings to cope with the limitations of existing biomaterials. In the case of adjustable degradation and configurable interaction with body fluids and cells, these coatings enlarge the applicability of the underlying biomaterials. Silks are interesting coating materials, e.g., for implants, since they exhibit excellent biocompatibility and mechanical properties. Herein, we present putative implant coatings made of five engineered recombinant spider silk proteins derived from the European garden spider Araneus diadematus fibroins (ADF), differing in amino acid sequence and charge. We analyzed the influence of the underlying amino acid composition on wetting behavior, blood compatibility, biodegradability, serum protein adsorption, and cell adhesion. The outcome of the comparison indicates that spider silk coatings can be engineered for explicit biomedical applications.

Biological Efficacy Comparison of Natural Tussah Silk and Mulberry Silk Nanofiber Membranes for Guided Bone Regeneration

Biopolymer nanofiber membranes are attracting interest as promising biomaterial scaffolds with a remarkable range of structural and functional performances for guided bone regeneration (GBR). In this study, tussah silk nanofiber (TSn) and Bombyx mori silk nanofiber (BSn) membranes were prepared by physical shearing. The diameters of the TSn and BSn membranes were 146.09 ± 63.56 and 120.99 ± 91.32 nm, respectively. TSn showed a Young's modulus of 3.61 ± 0.64 GPa and a tensile strength of 74.27 ± 5.19 MPa, which were superior to those of BSn, with a Young's modulus of 0.16 ± 0.03 GPa and a tensile strength of 4.86 ± 0.61 MPa. The potential of TSn and BSn membranes to guide bone regeneration was explored. In vitro, the TSn membrane exhibited significantly higher cell proliferation for MC3T3-E1 cells than the BSn membrane. In a cranial bone defect in a rat model, the TSn and BSn membranes displayed superior bone regeneration compared to the control because the membrane prevented the ingrowth of soft tissue to the defective area. Compared to the BSn membrane, the TSn membrane improved damaged bone regeneration, presumably due to its superior mechanical properties, high osteoconductivity, and increased cell proliferation. The TSn membrane has a bionic structure, excellent mechanical properties, and greater biocompatibility, making it an ideal candidate for GBR.

Robust Nanofiber Mats Exfoliated From Tussah Silk for Potential Biomedical Applications

Nanofibers as elements for bioscaffolds are pushing the development of tissue engineering. In this study, tussah silk was mechanically disintegrated into nanofibers dispersed in aqueous solution which was cast to generate tussah silk fibroin (TSF) nanofiber mats. The effect of treatment time on the morphology, structure, and mechanical properties of nanofiber mats was examined. SEM indicated decreasing diameter of the nanofiber with shearing time, and the diameter of the nanofiber was 139.7 nm after 30 min treatment. These nanofiber mats exhibited excellent mechanical properties; the breaking strength increased from 26.31 to 72.68 MPa with the decrease of fiber diameter from 196.5 to 139.7 nm. The particulate debris was observed on protease XIV degraded nanofiber mats, and the weight loss was greater than 10% after 30 days in vitro degradation. The cell compatibility experiment confirmed adhesion and spreading of NIH-3T3 cells and enhanced cell proliferation on TSF nanofiber mats compared to that on Bombyx mori silk nanofiber mats. In conclusion, results indicate that TSF nanofiber mats prepared in this study are mechanically robust, slow biodegradable, and biocompatible materials, and have promising application in regenerative medicine.

Cationic Antheraea pernyi Silk Fibroin-Modified Adenovirus-Mediated ING4 and IL-24 Dual Gene Coexpression Vector Suppresses the Growth of Hepatoma Carcinoma Cells

Introduction

Cancer gene therapy requires both effective tumor suppressor genes and safe vectors that express target genes efficiently. Inhibitor of growth 4 (ING4) inhibits tumor growth via multiple pathways. Interleukin-24 (IL-24) also has tumor-suppressive activity against a broad spectrum of human cancers. Adenovirus (Ad) vectors exhibit high infection efficiency, but potential toxicity related to high doses of adenovirus has led to careful reconsideration of their use in human clinical trials. Antheraea pernyi silk fibroin (ASF) is a cytocompatible and biodegradable natural polymer, and it possesses Arg–Gly–Asp sequences exhibiting a high binding affinity and selectivity for α_vβ₃ and α_vβ₅ integrin receptors, which are overexpressed in tumor vessels and most tumor cells.

Methods

In this study, an Arg-Gly-Asp peptide-modified Ad vector coexpressing ING4 and IL-24 was constructed by homologous recombination of the dual gene coexpression transfer plasmid and RGD-modified pAdEasy-1 adenoviral backbone plasmid. The cationic ASF (CASF) was prepared by modifying ASF with low-molecular-weight PEI. The negatively charged Ad vector was modified with CASF to form a CASF/Ad complex.

Results

Human hepatoma carcinoma SMMC-7721 cells and normal hepatic L-02 cells were infected with the CASF/Ad complex, which showed significantly higher infection efficiency than the naked Ad. The CASF/Ad complex could effectively mediate the expression of the target gene ING4 in SMMC-7721 cells and the secretion of the target gene IL-24 from SMMC-7721 cells, thus inducing apoptosis of hepatoma carcinoma SMMC-7721 cells. The viability of SMMC-7721 and L-02 cells infected with the CASF/Ad complex was further assessed, and it was found that the growth of SMMC-7721 cells was significantly inhibited but that the growth and proliferation of L-02 cells were not affected.

Conclusion

The CASF/Ad complex constructed in this study, showing improved infection efficiency and enhanced suppressive effects on human hepatoma carcinoma SMMC-7721 cells, has the potential to reduce the dose of adenovirus and still maintain high infection efficiency and tumor inhibition.

Comparative analysis of proteins from Bombyx mori and Antheraea pernyi cocoons for the purpose of silk identification

Achieving efficient identification of silk protein requires highly sensitive analytical techniques and favorable extraction methods, which is of great significance to the research of ancient silk, especially for the controversial issue of the silk origin. In this paper, proteomics and western blot were proposed to analyze the silk proteins of Bombyx mori (B. mori) and Antheraea pernyi (A. pernyi) dissolved by different methods. First, the differences in secondary structure were detected via spectroscopy. LC-MS/MS was then employed to characterize the peptides of silk proteins precisely. LiBr solution exhibited outstanding dissolution effect on B. mori cocoon, with 87 proteins detected; while copper-ethylenediamine solution (CED) was more appropriate for A. pernyi cocoon, and 16 proteins were identified in A. pernyi-CED. In addition to fibroin and sericin, abundant seroins, enzymes, protease inhibitors, other functional proteins and uncharacterized proteins were detected. Based on the LC-MS/MS data, diagnostic antibodies for the two species were prepared, and fibroin was successfully identified by western blot assay because both dissolution methods were gentle and did not destroy the antigenic epitopes in the protein molecule. Owing to their good specificity and high sensitivity, these diagnostic antibodies have good application prospects in immunoassays of different silk species. SIGNIFICANCE: This study presents the comprehensive analysis on silk identification of proteins from B. mori and A. pernyi extracted by different methods via the proteomic and immunology as well as the conventional approaches. Great coverage of two cocoon proteomes was accomplished, which demonstrated the outstanding difference in components and abundance. Based on the proteomics analysis, the diagnostic antibodies against two species were prepared and identified the corresponding fibroin successfully in the completed protein mixtures. To our knowledge, the proteomic and immunology procedures with high efficiency, sensitivity and specificity are novel analysis on the silk identification and has great potential in the field of ancient silk detection.

3D printing of mesoporous bioactive glass/silk fibroin composite scaffolds for bone tissue engineering

The fabrication of bone tissue engineering scaffolds with high osteogenic ability and favorable mechanical properties is of huge interest. In this study, a silk fibroin (SF) solution of 30 wt% was extracted from cocoons and combined with mesoporous bioactive glass (MBG) to fabricate MBG/SF composite scaffolds by 3D printing. The porosity, compressive strength, degradation and apatite forming ability were evaluated. The results illustrated that MBG/SF scaffolds had superior compressive strength (ca. 20 MPa) and good biocompatibility, and stimulated bone formation ability compared to mesoporous bioactive glass/polycaprolactone (MBG/PCL) scaffolds. We subcutaneously transplanted hBMSCs-loaded MBG/SF and MBG/PCL scaffolds into the back of nude mice to evaluate heterotopic bone formation assay in vivo, and the results revealed that the gene expression levels of common osteogenic biomarkers on MBG/SF scaffolds were significantly better than MBG/PCL scaffolds. These results showed that 3D-printed MBG/SF composite scaffolds are great promising for bone tissue engineering.

Optimal biomaterials for tracheal epithelial grafts: An in vitro systematic comparative analysis

Tracheal injury, stenosis, and malignancy demand tracheal reconstruction, which often fails due to the lack of a functioning epithelium. We performed an extensive comparative analysis to determine optimal biomaterials for developing tracheal epithelial grafts with mucociliary function. We screened Hyaluronan-Poly(Ethylene Glycol), Chitosan-Collagen, Collagen Vitrigel Membrane, Fibrin Glue, Silk Fibroin, and Gelatin based on various parameters including mechanical strength, bulk degradation, cell attachment, spreading, metabolic activity, focal adhesion formation, and differentiation into ciliated and goblet cells. Silk Fibroin had significantly higher tensile strength (21.23 ± 4.42 MPa), retained 50% of its mass across 5 weeks, allowed 80-100% cell spreading and increasing metabolic activity across 10 days, focal adhesion formation within 2 h, and differentiation into 5.9 ± 2.6% goblet cells. Silk Fibroin, however, led to poor ciliation, producing 5.5 ± 3.9% ciliated cells, whereas Collagen Vitrigel Membrane promoted excellent ciliation. To capitalize on the mechanical and differentiation benefits of its respective components, we developed a composite biomaterial of Silk Fibroin and Collagen Vitrigel Membrane (SF-CVM), which demonstrated enhanced maturation into 20.6 ± 1.7% ciliated and 5.6 ± 1.0% goblet cells. Development of biomaterials-based airway epithelial grafts that provide desirable mechanics and differentiation is a major step towards treatment of airway disease. STATEMENT OF SIGNIFICANCE: Tracheal blockage, injury, and malignancy greater than 50% of the adult tracheal length cannot be safely resected. Tracheal replacement is one approach, but a major cause of transplant failure is the lack of a functioning epithelium. While tissue engineering for tracheal regeneration using biomaterials is promising, there is currently no gold standard. Therefore, we performed a systematic comparative study to characterize relevant materials for generating a biomaterials-based airway epithelial graft. We developed a composite biomaterial intended for surgical implantation providing tensile strength, slow biodegradation, and optimal support for differentiation of mature epithelia. This is a significant step augmenting current state-of-the-art methods for airway surgeries, laryngeal reconstruction, and tracheal tissue engineering.

The potential of Antheraea pernyi silk for spinal cord repair

One of the most challenging applications for tissue regeneration is spinal cord damage. There is no cure for this, partly because cavities and scar tissue formed after injury present formidable barriers that must be crossed by axons to restore function. Natural silks are considered increasingly for medical applications because they are biocompatible, biodegradable and in selected cases promote tissue growth. Filaments from wild Antheraea pernyi silkworms can support axon regeneration in peripheral nerve injury. Here we presented evidence that degummed A. pernyi filaments (DAPF) support excellent outgrowth of CNS neurons in vitro by cell attachment to the high density of arginine-glycine-aspartic acid tripeptide present in DAPF. Importantly, DAPF showed stiffness properties that are well suited to spinal cord repair by supporting cell growth mechano-biology. Furthermore, we demonstrated that DAPF induced no activation of microglia, the CNS resident immune cells, either in vitro when exposed to DAPF or in vivo when DAPF were implanted in the cord. In vitro DAPF degraded gradually with a corresponding decrease in tensile properties. We conclude that A. pernyi silk meets the major biochemical and biomaterial criteria for spinal repair, and may have potential as a key component in combinatorial strategies for spinal repair.

Optimized composition of nanocomposite scaffolds formed from silk fibroin and nano-TiO2 for bone tissue engineering

Natural silk fibroin (SF) polymer has biomedical and mechanical properties as a biomaterial for bone tissue engineering scaffolds. Freeze-dried porous nanocomposite scaffolds were prepared from silk fibroin and titanium dioxide (TiO₂) nanoparticles as a bioactive reinforcing agent by a phase separation method. In order to fabricate SF/TiO₂ scaffolds, 5, 10, 15 and 20wt% of the TiO₂ were added to the SF. The phase structure, functional groups and morphology of the scaffolds were evaluated using X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy techniques, respectively. Porosity of the scaffolds was measured by Archimedes' Principle. In addition, mechanical properties of prepared scaffolds were evaluated by measuring the compressive strength and compressive modulus. The bioactivity property of these scaffolds was examined for 7, 14, 21 and 28days immersion in simulated body fluid (SBF) at 37°C and the in vitro degradation was studied by incubation in phosphate buffered saline (PBS) at 37°C and pH7.4 for up to 30days. Moreover, the scaffolds' biocompatibility was evaluated by seeding and culture of SaOS-2 osteoblast-like cells and assessment of their proliferation with MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay. Results showed that the prepared scaffolds had directional porosity and the reduction of porosity in composite scaffolds with higher contents of TiO₂ nanoparticles resulted to an improvement of the mechanical strength. The macroporous structures with open interconnected and directional pores were successfully obtained without applying any porogen or inorganic solvent. The bioactivity of these scaffolds was confirmed by scanning electron microscopy (SEM) showing surface crystallization of the apatite layer proportional to the duration of immersion in the SBF and the degradation rate of scaffolds were increased by increasing the TiO₂ content. The osteoblast-like cells showed a high attachment and proliferation on these scaffolds and their viability was increased with increasing the SF content. Finally, an optimum composition of SF/TiO₂ nanocomposite scaffolds was selected.

Foams Made of Engineered Recombinant Spider Silk Proteins as 3D Scaffolds for Cell Growth

Materials for tissue engineering have to be biocompatible and have to support cell adhesion, proliferation and differentiation. Additionally, in case of soft tissue engineering the mechanical properties have to accommodate that of the tissue with mechanical integrity until the artificial scaffold is replaced by natural extracellular matrix. In case of artificial 3D scaffolds, it is of critical importance to be able to tune the mechanical properties, the inner free volume (i.e., pore size) and degradation behavior of the employed biomaterial. Here, the potential of recombinant spider silk proteins was evaluated concerning their processing into and application as 3D scaffolds for soft tissue engineering. Highly porous foams made of the recombinant spider silk protein eADF4(C16) and a variant containing an RGD motif were fabricated by salt leaching yielding mechanically robust scaffolds. In contrast to other salt-leached silk scaffolds, the swelling behavior of these scaffolds was low, and the mechanical properties in the range of soft tissues. The pore size and porosity of the foams could be adjusted by the salt crystal size. Fibroblasts adhered and proliferated well in foams made of the spider silk RGD variant but not in the foams of the nonmodified one.

Spermine-modified Antheraea pernyi silk fibroin as a gene delivery carrier

The development of a novel cationized polymer used as a gene delivery carrier that can conveniently and effectively transfect cells resulting in a stably expressed target gene remains a challenge. Antheraea pernyi silk fibroin (ASF) is a cytocompatible and biodegradable natural polymer, and it possesses Arg-Gly-Asp sequences but a negative charge. In order to render ASF amenable to packaging plasmid DNA (pDNA), spermine was used to modify ASF to synthesize cationized ASF (CASF), which was used as a gene delivery carrier. CASF was characterized using trinitrobenzene sulfonic acid assay, the zeta potential determination, and a Fourier transform infrared analysis, and the results of these characterizations indicated that the -NH2 in spermine effectively reacts with the -COOH in the side chains of ASF. Spermine grafted to the side chains of ASF resulted in the conversion of the negative charge of ASF to a positive charge. CASF packaged pDNA and formed CASF/pDNA complexes, which exhibited spherical morphology with average particle sizes of 215-281 nm and zeta potential of approximately +3.0 mV to +3.2 mV. The results of the MTT assay, confocal laser scanning microscopy, and flow cytometry analysis in a human endothelial cell line revealed that CASF/pDNA complexes exhibited lower cytotoxicity and higher transfection efficiency compared to the pDNA complexes of polyethyleneimine. These results indicate that our synthesized CASF, a cationized polymer, is a potential gene delivery carrier with the advantages of biodegradability and low cytotoxicity.

Biopatterning of Silk Proteins for Soft Micro-optics

Silk proteins from spiders and silkworms have been proposed as outstanding candidates for soft micro-optic and photonic applications because of their optical transparency, unique biological properties, and mechanical robustness. Here, we present a method to form microstructures of the two constituent silk proteins, fibroin and sericin for use as an optical biomaterial. Using photolithography, chemically modified silk protein photoresists are patterned in 2D arrays of periodic patterns and Fresnel zone plates. Angle-dependent iridescent colors are produced in these periodic micropatterns because of the Bragg diffraction. Silk protein photolithography can used to form patterns on different substrates including flexible sheets with features of any shape with high fidelity and resolution over large areas. Finally, we show that these mechanically stable and transparent iridescent architectures are also completely biodegradable. This versatile and scalable technique can therefore be used to develop biocompatible, soft micro-optic devices that can be degraded in a controlled manner.

Enhanced the Negative Charges of Antheraea pernyi Silk Fibroin by Methylglyoxal Modification

Antheraea pernyi silk fibroin has favorable biocompatibility, good bioactivity and controllable biodegradability, meeting the basic requirements of controlled drug release carriers. Enhancing the negative charge of silk fibroin could further increase the encapsulation and loading efficiency of positively charged drugs. In this study, Antheraea pernyi silk fibroin was chemically modified by methylglyoxal in aqueous solution. The electric charge properties of Antheraea pernyi silk fibroin were examined to characterize the modification, the results indicated that the isoelectric point of Antheraea pernyi silk fibroin decreased from 4.5 to 3.9, and the zeta potential reduced from-11.7 mV to-12.8 mV. Amino acid analysis and 1H-NMR spectra showed that arginine residue of Antheraea pernyi silk fibroin side chain was modified by methylglyoxal for enhancing negative charge of silk fibroin. These results suggested that methylglyoxal-modified Antheraea pernyi silk fibroin could be considered as a potential starting material in loading positively charged drugs.

Antheraea pernyi silk fibroin-coated PEI/DNA complexes for targeted gene delivery in HEK 293 and HCT 116 cells

Polyethylenimine (PEI) has attracted much attention as a DNA condenser, but its toxicity and non-specific targeting limit its potential. To overcome these limitations, Antheraea pernyi silk fibroin (ASF), a natural protein rich in arginyl-glycyl-aspartic acid (RGD) peptides that contains negative surface charges in a neutral aqueous solution, was used to coat PEI/DNA complexes to form ASF/PEI/DNA ternary complexes. Coating these complexes with ASF caused fewer surface charges and greater size compared with the PEI/DNA complexes alone. In vitro transfection studies revealed that incorporation of ASF led to greater transfection efficiencies in both HEK (human embryonic kidney) 293 and HCT (human colorectal carcinoma) 116 cells, albeit with less electrostatic binding affinity for the cells. Moreover, the transfection efficiency in the HCT 116 cells was higher than that in the HEK 293 cells under the same conditions, which may be due to the target bonding affinity of the RGD peptides in ASF for integrins on the HCT 116 cell surface. This result indicated that the RGD binding affinity in ASF for integrins can enhance the specific targeting affinity to compensate for the reduction in electrostatic binding between ASF-coated PEI carriers and cells. Cell viability measurements showed higher cell viability after transfection of ASF/PEI/DNA ternary complexes than after transfection of PEI/DNA binary complexes alone. Lactate dehydrogenase (LDH) release studies further confirmed the improvement in the targeting effect of ASF/PEI/DNA ternary complexes to cells. These results suggest that ASF-coated PEI is a preferred transfection reagent and useful for improving both the transfection efficiency and cell viability of PEI-based nonviral vectors.

Silk fibroin biomaterials for tissue regenerations

Regeneration of tissues using cells, scaffolds and appropriate growth factors is a key approach in the treatments of tissue or organ failure. Silk protein fibroin can be effectively used as a scaffolding material in these treatments. Silk fibers are obtained from diverse sources such as spiders, silkworms, scorpions, mites and flies. Among them, silk of silkworms is a good source for the development of biomedical device. It possesses good biocompatibility, suitable mechanical properties and is produced in bulk in the textile sector. The unique combination of elasticity and strength along with mammalian cell compatibility makes silk fibroin an attractive material for tissue engineering. The present article discusses the processing of silk fibroin into different forms of biomaterials followed by their uses in regeneration of different tissues. Applications of silk for engineering of bone, vascular, neural, skin, cartilage, ligaments, tendons, cardiac, ocular, and bladder tissues are discussed. The advantages and limitations of silk systems as scaffolding materials in the context of biocompatibility, biodegradability and tissue specific requirements are also critically reviewed.

Acylation Modification ofAntheraea pernyiSilk Fibroin Using Succinic Anhydride and Its Effects on Enzymatic Degradation Behavior

The degradation rate of tissue engineering scaffolds should match the regeneration rate of new tissues. Controlling the degradation behavior of silk fibroin is an important subject for silk-based tissue engineering scaffolds. In this study,Antheraea pernyisilk fibroin was successfully modified with succinic anhydride and then characterized by zeta potential, ninhydrin method, and FTIR.In vitro, three-dimensional scaffolds prepared with modified silk fibroin were incubated in collagenase IA solution for 18 days to evaluate the impact of acylation on the degradation behavior. The results demonstrated that the degradation rate of modified silk fibroin scaffolds was more rapid than unmodified ones. The content of theβ-sheet structure in silk fibroin obviously decreased after acylation, resulting in a high degradation rate. Above all, the degradation behavior of silk fibroin scaffolds could be regulated by acylation to match the requirements of various tissues regeneration.