Enzymatic degradation and bioactivity evaluation of C-6 oxidized chitosan

Carbon flow, energy metabolic intensity and metagenomic characteristics of a Fe (III)-enhanced anerobic digestion system during treating swine wastewater

Deep treatment and bioenergy recovery of swine wastewater (SW) are beneficial for constructing a low-carbon footprint and resource-recycling society. In this study, Fe (III) addition from 0 to 600 mg/L significantly increased the methane (CH4) content of the recovered biogas from 61.4 ± 2.0 to 89.3 ± 2.0 % during SW treatment in an anaerobic membrane digestion system. The specific methane yields (SMY) also increased significantly from 0.20 ± 0.05 to 0.29 ± 0.02 L/g COD. Fe (III) and its bio-transformed products which participated in establishing direct interspecific electron transfer (DIET), upregulated the abundance of e-pili and Nicotinamide adenine dinucleotide (NADH), enriched electroactive bacteria. The increase in cellular adenosine triphosphate (cATP) from 6583 to 14,518 ng/gVSS and electron transport system (ETS) from 1468 to 1968 mg/(g·h) promoted the intensity of energy flow and electron flow during anaerobic digestion of SW. Moreover, Fe (III) promoted the hydrolysis and acidification of organic matters, and strengthened the acetoacetic methanogenesis pathway. This study established an approach for harvesting high quality bioenergy from SW and revealed the effects and mechanisms from the view of carbon flow, energy metabolic intensity and metagenomics.

Preparation and characterization of curcumin/chitosan conjugate as an efficient photodynamic antibacterial agent

Curcumin (Cur) is a natural pigment with excellent biological activity. The poor stability and insolubility of Cur in water severely limit its application. Therefore, to overcome these dilemmas which are big hindrances in their application, a novel derivative (COCS-Cur) was prepared by the esterification reaction of carboxylated chitosan (COCS) and Cur. The structure and properties of conjugate were determined through a series of characterizations. The derivatives had excellent solubility as well as stability. In addition, antioxidant and photodynamic antibacterial experiments proved that COCS-Cur had the excellent free radical scavenging ability and photodynamic antibacterial activity. The derivatives presented a better antibacterial effect on Staphylococcus aureus (S. aureus) than Escherichia coli (E. coli). Noteworthy, the COCS-Cur derivatives showed no obvious toxicity which makes them a stronger contender and potential antimicrobial agent or functional nutrient for application in the food industry.

Mechanism and Application of Chitosan and Its Derivatives in Promoting Permeation in Transdermal Drug Delivery Systems: A Review

The mechanisms and applications of chitosan and its derivatives in transdermal drug delivery to promote drug permeation were reviewed in this paper. Specifically, we summarized the permeation-promoting mechanisms of chitosan and several of its derivatives, including changing the structure of stratum corneum proteins, acting on the tight junction of granular layers, affecting intercellular lipids, and increasing the water content of stratum corneum. These mechanisms are the reason why chitosan and its derivatives can increase the transdermal permeation of drugs. In addition, various transdermal preparations containing chitosan and its derivatives were summarized, and their respective advantages were expounded, including nanoparticles, emulsions, transdermal microneedles, nanocapsules, transdermal patches, transdermal membranes, hydrogels, liposomes, and nano-stents. The purpose of this review is to provide a theoretical basis for the further and wider application of chitosan in transdermal drug delivery systems. In the future, research results of chitosan and its derivatives in transdermal drug delivery need more support from in vivo experiments, as well as good correlation between in vitro and in vivo experiments. In conclusion, the excellent permeability-promoting property, good biocompatibility, and biodegradability of chitosan and its derivatives make them ideal materials for local transdermal drug delivery.

Preparation and properties of chitosan-based bacteriostatic agents and their application in strawberry bacteriostatic preservation

The purpose of this study is to develop a green and safe chitosan-based preservative which can be applied in strawberry preservation. Chitosan (CS) was treated by 2,2,6,6-tetramethylpiperidine oxygen radical/laccase oxidation system (TEMPO/laccase oxidation system), which was mainly used to prepare TEMPO/laccase chitosan (TLCS). Furthermore, on this basis, the structure and performance of TLCS were also studied. The results showed that compared with CS, the solubility of TLCS improved, and the kinetic viscosity reduced significantly. Next, a cinnamaldehyde-TEMPO/laccase chitosan (CIN-TLCS) antibacterial agent was prepared by covalently combining the aldehyde group in cinnamaldehyde (CIN) and the amino group in CS. It was found that CIN combined with TLCS through covalent bonds, which changed the structure and crystallinity of TLCS. In addition, the total antioxidant capacity of CIN-TLCS also improved, which was necessary for the application of CIN-TLCS in extending shelf life. Cytotoxicity experiments showed that CIN-TLCS had no cytotoxicity. Furthermore, strawberries were used to explore the actual bacteriostatic and fresh-keeping effects of CIN-TLCS. The experiment found that CIN-TLCS could maintain the freshness of strawberries at room temperature (23 ± 1°C) for 5 days and had positive effects on strawberry color, loss-weight rate, hardness and pH. These results showed that CIN-TLCS could be used as a potential preserving agent for fruit storage. PRACTICAL APPLICATION: To obtain a green, safe and effective food preservative, chitosan (CS) was modified by a 2,2,6,6-tetramethylpiperidine oxygen radical/laccase oxidation system (TEMPO/laccase oxidation system) to get TEMPO/laccase chitosan (TLCS) and cinnamic aldehyde-TEMPO/laccase chitosan (CIN-TLCS). At the same time, the structure and antibacterial properties of TLCS and CIN-TLCS were analyzed, and their possibility as a new green and safe strawberry preservative was studied. Compared with oxazolidine, imidazole and triazole commercial drugs, CIN-TLCS has the advantages of low price, no pollution, no cytotoxicity and no drug resistance.

Efficacy of a Chitin-Based Water-Soluble Derivative in Inducing Purpureocillium lilacinum against Nematode Disease (Meloidogyne incognita)

Plant-parasitic nematodes cause severe economic losses annually which has been a persistent problem worldwide. As current nematicides are highly toxic, prone to drug resistance, and have poor stability, there is an urgent need to develop safe, efficient, and green strategies. Natural active polysaccharides such as chitin and chitosan with good biocompatibility and biodegradability and inducing plant disease resistance have attracted much attention, but their application is limited due to their poor solubility. Here, we prepared 6-oxychitin with good water solubility by introducing carboxylic acid groups based on retaining the original skeleton of chitin and evaluated its potential for nematode control. The results showed that 6-oxychitin is a better promoter of the nematicidal potential of Purpureocillium lilacinum than other water-soluble chitin derivatives. After treatment, the movement of J2s and egg hatching were obviously inhibited. Further plant experiments found that it can destroy the accumulation and invasion of nematodes, and has a growth-promoting effect. Therefore, 6-oxychitin has great application potential in the nematode control area.

Synthesis and effects of the selective oxidation of chitosan in induced disease resistance against Botrytis cinerea

Plant fungal diseases can lead to yield reduction and quality degradation in crops, which usually cause serious economic losses. Additionally, chemical fungicides used in the prevention and control of plant diseases are increasingly restricted due to resistance development and high toxicity. Therefore, biogenic fungicides such as chitosan with low toxicity and good biocompatibility are receiving increasing attention. This study found that the acid swelling chitosan pretreatment method can accelerate the rate of the specific oxidation of chitosan catalyzed by the TEMPO-NaBr-NaOCl system. This study proved that OCTS induces plant disease resistance, and the control efficiencies achieved in protection and treatment experiments against Botrytis cinerea were 80.6 % and 83.4 %, respectively, at 400 μg/mL OCTS. In addition, OCTS can promote plant growth and enhance plant defense enzyme activities. This research has realized a forward-looking exploration of the application of OCTS in the agricultural field.

Conversion Mechanisms of Nitroxyl Radical (TEMPO), Oxoammonium Cation, and Hydroxylamine in Aqueous Solutions: Two-Dimensional Correlation Ultraviolet-Visible Spectroscopy

Oxidation reactions of alcohols have been of interest due to their broad applications in different fields. Oxoammonium cation (TEMPO⁺) of 2,2,6,6-tetramethyl piperidine-1-oxyl (TEMPO) is a high-potential oxidant for the selective oxidation of primary alcohols, with hydroxylamine (TEMPOH) as a side product. TEMPO or TEMPO⁺ has been widely applied for various reactions. However, the conversion mechanisms among TEMPO, TEMPO⁺, and TEMPOH are not well understood and remain controversial, due to complications in the direct observation of the reactions. In this work, two-dimensional correlation (2D-COS) UV-visible (UV-Vis) spectroscopy is applied to examine the correlations between the characteristic bands of each species, to obtain insights into the complete reaction mechanisms. Series of dynamic UV-Vis spectra of solutions under different external perturbations (as a function of reaction time) were recorded and used in the generation of 2D-COS synchronous and asynchronous maps. The key UV-Vis band assignments are as follows: 250 nm and 400 nm for TEMPO, 290 nm and 480 nm for TEMPO⁺, and 200 nm and 315 nm for TEMPOH. The results indicate that the conversion between TEMPO and TEMPOH in acidic solution is a reversible process, which reaches an equilibrium state after two hours. However, the reaction becomes irreversible after three hours, due to a higher degree of irreversible protonation of TEMPOH to form TEMPOH-H⁺. Fast conversion from TEMPO to TEMPO⁺ is observed when sodium hypochlorite co-oxidant is added. The synproportionation-disproportionation also reaches an equilibrium. However, there is no evidence of the conversion from TEMPOH to TEMPO⁺ under the reaction conditions. At high reaction temperature, the formation of TEMPOH occurs first from TEMPO⁺ decomposition, followed by TEMPO decomposition. These detailed mechanisms are beneficial in designing the optimum process conditions for the oxidation of specific alcohols.

Chitosan Contribution to Therapeutic and Vaccinal Approaches for the Control of Leishmaniasis

The control of leishmaniases, a complex parasitic disease caused by the protozoan parasite Leishmania, requires continuous innovation at the therapeutic and vaccination levels. Chitosan is a biocompatible polymer administrable via different routes and possessing numerous qualities to be used in the antileishmanial strategies. This review presents recent progress in chitosan research for antileishmanial applications. First data on the mechanism of action of chitosan revealed an optimal in vitro intrinsic activity at acidic pH, high-molecular-weight chitosan being the most efficient form, with an uptake by pinocytosis and an accumulation in the parasitophorous vacuole of Leishmania-infected macrophages. In addition, the immunomodulatory effect of chitosan is an added value both for the treatment of leishmaniasis and the development of innovative vaccines. The advances in chitosan chemistry allows pharmacomodulation on amine groups opening various opportunities for new polymers of different size, and physico-chemical properties adapted to the chosen routes of administration. Different formulations have been studied in experimental leishmaniasis models to cure visceral and cutaneous leishmaniasis, and chitosan can act as a booster through drug combinations with classical drugs, such as amphotericin B. The various architectural possibilities given by chitosan chemistry and pharmaceutical technology pave the way for promising further developments.

Constructing a robust chrome-free leather tanned by biomass-derived polyaldehyde via crosslinking with chitosan derivatives

Tanning leather using green biomass-derived polyaldehyde (BPA) is a promising approach to eliminate the widespread Cr pollution in leather industry, but unsatisfactory thermal stability and mechanical strength of the correlated resultant leather limited its industrial application. Herein, we report a green methodology to strengthen BPA tanned leather via introducing chitosan derivatives to crosslink with free aldehyde groups on dialdehyde carboxymethylcellulose (DCMC) tanned leather. H₂O₂ was employed for purposely modifying chitosan to prepare low-molecular chitosan (LMC) with lower positive charge. The interactions between chitosan/LMC and DCMC were investigated to elucidate the strengthening mechanism. Owing to the weakened hydrogen bonding network and higher accessibility of amino groups on LMC, LMC could react much easier with aldehyde groups on DCMC. Moreover, LMC could efficiently penetrate into the internal fiber networks of leather for further interlocking, which enhanced the thermal stability and the lubricating degree of crust leather and, as a result, the tensile and tear strengths were significantly improved by 79.3% and 25.3%, respectively. Therefore, the use of LMC can promote the widespread application of BPA tanned leather, benefiting to the complete elimination of hazardous Cr pollution.

Oxidized chitosan modified electrospun scaffolds for controllable release of acyclovir

Developing a novel scaffold carrier with a sustained and controllable release profile of drug is essential to promote the effective transdermal delivery for acyclovir (ACY). In this work, electrospun polyacrylonitrile nanofibers (PAN NFs) was chemically modified with oxidized chitosan (OC). The modified fibrous scaffold was further loaded with the ACY for drug released investigation. FT-IR and NMR results revealed that the conversion of the functional group for each step has successfully occurred on the surface of the fibers. Through the in-vitro drug release and kinetic study, it demonstrated that ACY could be sustainably and controlled released from the OC modified scaffold following the Korsmeyer-Peppas model with a Fickian diffusion mechanism. The human adipose-derived stem cells and the blood combability evaluation confirmed the obtained scaffold possessed excellent cell biocompatibility and hemocompatibility. It could be concluded that the resultant OC modified scaffold based on electrospun PAN NFs opened a new potential option for the topical/transdermal drug delivery of ACY.

Modification of Chitosan for the Generation of Functional Derivatives

Today, chitosan (CS) is probably considered as a biofunctional polysaccharide with the most notable growth and potential for applications in various fields. The progress in chitin chemistry and the need to replace additives and non-natural polymers with functional natural-based polymers have opened many new opportunities for CS and its derivatives. Thanks to the specific reactive groups of CS and easy chemical modifications, a wide range of physico-chemical and biological properties can be obtained from this ubiquitous polysaccharide that is composed of β-(1,4)-2-acetamido-2-deoxy-d-glucose repeating units. This review is presented to share insights into multiple native/modified CSs and chitooligosaccharides (COS) associated with their functional properties. An overview will be given on bioadhesive applications, antimicrobial activities, adsorption, and chelation in the wine industry, as well as developments in medical fields or biodegradability.

Inhibition of oil digestion in Pickering emulsions stabilized by oxidized cellulose nanofibrils for low-calorie food design

Celluloses are renewable and biodegradable natural resources. The application of celluloses as oil-in-water Pickering emulsifiers is still quite limited. In this paper, cellulose nanofibrils (CNFs) with oxidation degrees (DOs) of 52.8% and 92.7% (DO50 and DO90) were obtained from TEMPO-mediate oxidation for microcrystalline cellulose (MC). The production of carboxyl groups of CNFs were confirmed by FT-IR and ¹³C solid-NMR. CNF-stabilized O/W Pickering emulsion showed excellent colloidal stability compared with un-oxidized cellulose by Turbiscan stability analysis. Additionally, CNF-stabilized Pickering emulsions showed stable colloidal properties in simulated intestinal fluid (SIF). Most importantly, in vitro fatty acid release kinetics under SIF showed that CNFs have strong inhibitory lipid digestion behavior. Our results suggest that the oxidation modification not only improves their emulsification activity but also promotes their application in oil digestion inhibition, providing inspiration for designing and developing low-calorie food products.

Oil digestion in CNF-stabilized Pickering emulsion was inhibited effectively.

Structural characterization and rheological behavior of a heteroxylan extracted from Plantago notata Lagasca (Plantaginaceae) seeds

Plantago notata (Plantaginaceae) is a spontaneous plant from Septentrional Algerian Sahara currently used by traditional healers to treat stomach disorders, inflammations or wound healing. A water-soluble polysaccharide, called PSPN (PolySaccharide fraction from Plantago Notata), was extracted and purified from the seeds of this semi-arid plant. The structural features of this mucilage were evaluated by colorimetric assays, Fourier transformed infrared spectroscopy (FT-IR), gas chromatography coupled to mass spectrometry (GC/MS) and ¹H/¹³C Nuclear Magnetic Resonance (NMR) spectroscopy. PSPN is a heteroxylan with a backbone composed of β-(1,3)-d-Xylp and β-(1,4)-d-Xylp highly branched, through (O)-2 and (O)-3 positions of β-(1,4)-d-Xylp by various side chains and terminal monosaccharides such as α-l-Araf-(1,3)-β-d-Xylp, β-d-Xylp-(1,2)-β-d-Xylp, terminal Xylp or terminal Araf. The physico-chemical and rheological analysis of this polysaccharide in dilute and semi diluted regimes showed that PSPN exhibites a molecular weight of 2.3×10⁶g/mol and a pseudoplastic behavior.

TEMPO-mediated oxidation of polysaccharides: An ongoing story

The oxidation of natural polysaccharides by TEMPO has become by now an "old chemical reaction" which led to numerous studies mainly conducted on cellulose. This regioselective oxidation of primary alcohol groups of neutral polysaccharides has generated a new class of polyuronides not identified before in nature, even if the discovery of enzymes promoting an analogous oxidation has been more recently reported. Around the same time, the scientific community discovered the surprising biological and techno-functional properties of these anionic macromolecules with a high potential of application in numerous industrial fields. The objective of this review is to establish the state of the art of TEMPO chemistry applied to polysaccharide oxidation, its history, the resulting products, their applications and the associated modifying enzymes.

Overexpression and Enzymatic Assessment of Antigenic Fragments of Hyaluronidase Recombinant Protein From Streptococcus pyogenes

BACKGROUND

Hyaluronidase catalyzes the hydrolysis of hyaluronan polymers to N-acetyl-D-glucosamine and D-glucuronic acid. This enzyme is a dimer of identical subunits. Hyaluronidase has different pharmaceutical and medical applications. Previously, we produced a recombinant hyaluronidase antigenic fragment of Streptococcus pyogenes.

OBJECTIVES

This study aimed to improve the protein production and purity of hyaluronidase recombinant protein from S. pyogenes. In addition, the enzymatic activity of this protein was investigated.

MATERIALS AND METHODS

The expression of hyaluronidase antigenic fragments was optimized using IPTG concentration, time of induction, temperature, culture, and absorbance of 0.6-0.8-1 at 600 nm. Afterwards, the expressed proteins were purified and the enzymatic activity was assessed by turbid metric method.

RESULTS

Data indicated that maximum protein is produced in OD = 0.8, 0.5 mM Isopropyl β-D-1-thiogalactopyranoside (IPTG), 37ºC, NB 1.5x, without glucose, incubated for overnight. The enzymatic activity of the recombinant protein was similar to the commercial form of hyaluronidase.

CONCLUSIONS

The results showed that an antigenic fragment of the recombinant hyaluronidase protein from S. pyogenes has a considerable enzymatic activity. It can be suggested to use it for medical purposes. In addition, applications of bioinformatics software would facilitate the production of a smaller protein with same antigenic properties and enzymatic activity.