Fabrication and evaluation of celecoxib microparticle surface modified by hydrophilic cellulose and surfactant

Celecoxib Crystallized from Hydrophilic Polymeric Solutions Showed Modified Crystalline Behavior with an Improved Dissolution Profile

The crystallization technique has been established as a cost-effective and simple approach to improve the dissolution rate and oral bioavailability of poorly soluble drugs. This study was carried out to study the effect of some selected hydrophilic polymers such as methyl cellulose, hydroxypropyl methylcellulose (HPMC), polyvinyl alcohol, and carboxymethyl cellulose on the crystal behavior and dissolution properties of celecoxib (CLX), a common nonsteroidal anti-inflammatory drug. Structural and spectral characteristics of crystallized CLX have been studied by Fourier transform infrared (FTIR) spectroscopy, diffraction scanning calorimetry (DSC), and X-ray diffraction (XRD) analysis. From FTIR and DSC analysis, no significant shifting of peaks or appearance of any new peaks (for polymers) were observed, which indicated the absence of any major interaction between drug and polymers as well as the absence of polymers in the final crystallized product of CLX. The XRD analysis showed a change in crystalline morphology to some extent. The dissolution rate of crystallized CLX in the presence of polymers (particularly with HPMC) was significantly improved compared with plain CLX. The improved dissolution profile of the experimental CLX crystal products could be an indication of improved bioavailability of CLX for better clinical outcome.

Self-Emulsifying Drug Delivery System of Celecoxib for Avoiding Delayed Oral Absorption in Rats with Impaired Gastric Motility

This study aimed to develop a self-emulsifying drug delivery system (SEDDS) of celecoxib (CEL) for suppressed delay in oral absorption under impaired gastric motility. A pseudo-ternary phase diagram was constructed for the determination of the optimal component ratio in SEDDS of CEL (SEDDS/CEL), and the SEDDS/CEL was physicochemically characterized. A pharmacokinetic study on orally dosed CEL samples (5-mg CEL/kg) was carried out in normal and propantheline (PPT)-treated rats to mimic impaired gastric motility. SEDDS/CEL rapidly formed a fine emulsion with a mean size of 147 nm in distilled water and significantly improved the dissolution behavior of CEL under pH 1.2 condition with a 20-fold higher dissolved amount than crystalline CEL. In normal rats, orally dosed SEDDS/CEL provided a 4.6-fold higher systemic exposure than that of crystalline CEL, due to the improved dissolution properties of CEL. Crystalline CEL showed delayed and decreased oral absorption of CEL in PPT-treated rats as evidenced by a 6.9-h-delayed mean absorption time and only 12% of the systemic exposure of CEL compared with those in normal rats. In contrast, SEDDS/CEL enhanced the oral absorption of CEL with a 14.6-fold higher systemic exposure with significant suppression of delay in absorption than crystalline CEL even in PPT-treated rats. SEDDS/CEL could be an efficacious option for suppressing delay in CEL absorption even under impairment of gastric motility, possibly leading to rapid and reproducible management of severe acute pain.

Development and Evaluation of Poorly Water-Soluble Celecoxib as Solid Dispersions Containing Nonionic Surfactants Using Fluidized-Bed Granulation

The purpose of this study is to develop a solid dispersion system with improved dissolution, absorption, and patient compliance of poorly water-soluble celecoxib (CXB). Instead of sodium lauryl sulfate (SLS), an anionic surfactant used in the marketed product (Celebrex^®), solubilization was performed using non-ionic surfactants with low toxicity. Cremophor RH40 (Cre-RH) was selected as the optimal solubilizer. Granules and tablets containing CXB and Cre-RH were prepared via fluid-bed and tableting processes, respectively. The morphology, crystallinity, flowability, dissolution, and pharmacokinetics for CXB-solid dispersion granules (SDGs) and the hardness and friability for CXB-solid dispersion tablets (SDTs) were evaluated. The solubility of CXB was found to be increased by about 717-fold when using Cre-RH. The dissolution of granules containing Cre-RH was found to be increased greatly compared with CXB API and Celebrex^® (66.9% versus 2.3% and 37.2% at 120 min). The improvement of the dissolution was confirmed to be the same as that of granules in tablets. The CXB formulation resulted in 4.6- and 4.9-fold higher AUC_inf and C_max of CXB compared with those of an oral dose of CXB powder in rats. In short, these data suggest that the solid dispersion based on Cre-RH—a non-toxic solubilizer, non-ionic surfactant— may be an effective formulation for CXB to enhance its oral bioavailability and safety.

A Novel Method to Mask the Bitter Taste of Berberine Hydrochloride: Powder Surface Modification

Background:

Berberine hydrochloride (BH) is widely used as a nonprescription drug to treat diarrhea without drug resistance and side effects worldwide. However, its drastic bitterness affects patient compliance severely. Hence, it is essential to mask the bitter taste of BH.

Objective:

Powder surface modification technology is attempted to mask the bitterness of BH through changing the surface properties in vibromill. The purpose of this study was to apply this technology to mask the bitterness of BH and improve the patient compliance.

Materials and Methods:

Initially, to prepare the modifier-BH composites, some parameters were optimized, including type of modifiers, ratio between BH and modifiers, and composite time. Then, the contact angles, scanning electron microscopy, and infrared (IR) spectroscopy were utilized to evaluate the microstructure of composites. Moreover, electronic tongue measurement, animal performance test, and bitterness evaluation methods were applied to evaluate the masking effect.

Results:

Based on the results of bitter taste evaluations, mannitol was chosen as the best modifier, and the optimal ratio of BH and mannitol was 6:4 with grinding together for 2 min in vibromill. For the composites prepared by this process, the IR spectroscopy and surface properties were similar with that of mannitol, and the microstructure was also demonstrated that small particles of mannitol successfully coated on the surface of BH. Special structure of the composites decreased the contact area between BH and external media and finally inhibited the bitterness. This effect was confirmed by three different kinds of methods.

Conclusion:

Our study provides a novel method to mask the bitter taste of drugs. It will be of great interest to pharmaceutical experts and pharmacists.

SUMMARY

Powder surface modification, a novel and different from previous technology, is used to prepare modifier-berberine hydrochloride composites to mask the bitter taste of BH

Electronic tongue measurement, animal performance test, human sensory test, and chemical evaluation method were simultaneously applied to evaluate the masking effect

A novel method to mask the bitter taste of drugs was provided.

Abbreviations used: BH:Berberine hydrochloride; CDI: Clostridium difficile infection; ODT: Orally disintegrating tablets; HPLC: High-performance liquid chromatography; CAs: Contact angles; SEM: Scanning electron microscopy; IR: Infrared spectrogram.

Improving dissolution and oral bioavailability of pranlukast hemihydrate by particle surface modification with surfactants and homogenization

The present study was carried out to develop an oral formulation of pranlukast hemihydrate with improved dissolution and oral bioavailability using a surface-modified microparticle. Based on solubility measurements, surface-modified pranlukast hemihydrate microparticles were manufactured using the spray-drying method with hydroxypropylmethyl cellulose, sucrose laurate, and water and without the use of an organic solvent. The hydrophilicity of the surface-modified pranlukast hemihydrate microparticle increased, leading to enhanced dissolution and oral bioavailability of pranlukast hemihydrate without a change in crystallinity. The surface-modified microparticles with an hydroxypropylmethyl cellulose/sucrose laurate ratio of 1:2 showed rapid dissolution of up to 85% within 30 minutes in dissolution medium (pH 6.8) and oral bioavailability higher than that of the commercial product, with approximately 2.5-fold and 3.9-fold increases in area under the curve (AUC_{0→12 h}) and peak plasma concentration, respectively. Therefore, the surface-modified microparticle is an effective oral drug delivery system for the poorly water-soluble therapeutic pranlukast hemihydrate.

Formulation, characterization, and in vivo evaluation of celecoxib-PVP solid dispersion nanoparticles using supercritical antisolvent process

The aim of this study was to develop celecoxib-polyvinylpyrrolidone (PVP) solid dispersion nanoparticles with and without surfactant using the supercritical antisolvent (SAS) process. The effect of different surfactants such as gelucire 44/14, poloxamer 188, poloxamer 407, Ryoto sugar ester L1695, and d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) on nanoparticle formation and dissolution as well as oral absorption of celecoxib-PVP K30 solid dispersion nanoparticles was investigated. Spherical celecoxib solid dispersion nanoparticles less than 300 nm in size were successfully developed using the SAS process. Analysis by differential scanning calorimetry and powder X-ray diffraction showed that celecoxib existed in the amorphous form within the solid dispersion nanoparticles fabricated using the SAS process. The celecoxib-PVP-TPGS solid dispersion nanoparticles significantly enhanced in vitro dissolution and oral absorption of celecoxib relative to that of the unprocessed form. The area under the concentration-time curve (AUC0→24 h) and peak plasma concentration (Cmax) increased 4.6 and 5.7 times, respectively, with the celecoxib-PVP-TPGS formulation. In addition, in vitro dissolution efficiency was well correlated with in vivo pharmacokinetic parameters. The present study demonstrated that formulation of celecoxib-PVP-TPGS solid dispersion nanoparticles using the SAS process is a highly effective strategy for enhancing the bioavailability of poorly water-soluble celecoxib.