Development of K-doped ZnO nanoparticles encapsulated crosslinked chitosan based new membranes to stimulate angiogenesis in tissue engineered skin grafts

A novel methodology for stabilization of silver nanoparticles on cotton, nylon and cotton/nylon fabrics using chitosan and triethyl orthoformate for enhanced and elongated antibacterial performance

In the present study, the commercially available three different fabrics cotton, nylon and cotton/nylon were modified by chitosan and silver nanoparticles using a crosslinker triethyl orthoformate (TEOF). Resulted cotton‑silver (Ag-Cs-Cot), nylon‑silver (Ag-Cs-Nyl) and cotton-nylon silver (Ag-Cs-Cot-Nyl) fabrics showed significant anti-bacterial activity even after 50 washing cycles. Silver nanoparticles were prepared by reducing silver nitrate through sodium borohydride at 0 °C. In FTIR spectra the peak at near 1650 cm-1 confirmed that TEOF mediated attachment of chitosan with fabrics (due to C=N) and the stretching of secondary amine near the 3375 cm-1 indicated the silver attachment to the amine group of the chitosan. In Scanning Electron Microscope (SEM) images smooth surfaces of fabrics without any damage by modification process were observed. The antibacterial activity was Analyzed by agar diffusion and broth dilution assays against Escherichia coli and Staphylococcus aureus bacterial strains and results showed 90% bacterial inhibition against E. coli and 89% bacterial inhibition against S. aureus. For testing the antibacterial durability, the modified fabrics were washed with non-ionic detergent (10g/l) for 15 minutes under aggressive stirring (100 rpm) at room temperature. The modified fabrics retained antibacterial activity over the 50 washing cycles. Finally, the commercial potential of cotton-silver fabric was evaluated by stitching it with the socks of football players and interestingly results showed that the modified fabric on the socks showed more than 90% bacterial inhibition as compared to the plain fabric after 70 minutes of playing activity.

Synthesis of cerium, zirconium, and copper doped zinc oxide nanoparticles as potential biomaterials for tissue engineering applications

A novel eco-friendly high throughput continuous hydrothermal flow system was used to synthesise phase pure ZnO and doped ZnO in order to explore their properties for tissue engineering applications. Cerium, zirconium, and copper were introduced as dopants during flow synthesis of ZnO nanoparticles, Zirconium doped ZnO were successfully synthesised, however secondary phases of CeO and CuO were detected in X-ray diffraction (XRD). The nanoparticles were characterised using X-ray diffraction, Brunauer-Emmett-Teller (BET), Dynamic Light scattering Measurements, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and RAMAN spectroscopy was used to evaluate physical, chemical, and structural properties. The change in BET surface area was also significant, the surface area increased from 11.35 (ZnO_2) to 26.18 (ZrZnO_5). However. In case of CeZnO_5 and CuZnO_5 was not significant 13.68 (CeZnO_5) and 12.16 (CuZnO_5) respectively. Cell metabolic activity analysis using osteoblast-like cells (MG63) and human embryonic derived mesenchymal stem cells (hES-MP) demonstrated that doped ZnO nanoparticles supported higher cell metabolic activity compared to cells grown in standard media with no nanoparticles added, or pure zinc oxide nanoparticles. The ZrZnO_5 demonstrated the highest cell metabolic activity and non-cytotoxicity over the duration of 28 days as compared to un doped or Ce or Cu incorporated nanoparticles. The current data suggests that Zirconium doping positively enhances the properties of ZnO nanoparticles by increasing the surface area and cell proliferation. Therefore, are potential additives within biomaterials or for tissue engineering applications.

Zinc oxide loaded chitosan-elastin-sodium alginate nanocomposite gel using freeze gelation for enhanced adipose stem cell proliferation and antibacterial properties

Hydrogels have been the material of choice for regenerative medicine applications due to their biocompatibility that can facilitate cellular attachment and proliferation. The present study aimed at constructing a porous hydrogel composite scaffold (chitosan, sodium alginate and elastin) for the repair of chronic skin wounds. Chitosan-based hydrogel incorporating varying concentrations of zinc oxide nanoparticles i.e. ZnO-NPs (0, 0.001, 0.01, 0.1 and 1 % w/w) as the antimicrobial agent tested against Escherichia coli (E.coli) and Staphylococcus aureus (S. aureus) exhibited good antibacterial activities. ZnO-NPs were characterized by UV visible spectroscopy, Scanning electron microscopy (SEM) analysis, Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis. Fabricated gels were characterized by SEM analysis, FTIR, XRD, swelling ratio, degradation behavior and controlled release kinetics of ZnO-NPs. In vitro cytocompatibility of the composite was investigated using human adipose stem cells (ADSCs) by MTT and lactate dehydrogenase (LDH) assay, further assessed by SEM analysis and PKH26 staining. The SEM and XRD analysis confirmed the successful loading of ZnO-NPs into these scaffolds. Fluorescence PKH26 stained images and SEM analysis of ADSCs seeded scaffolds revealed biocompatible nature. The findings suggested that the developed composite gels have potential clinically for tissue engineering and chronic wound treatment.

Aloe vera and ofloxacin incorporated chitosan hydrogels show antibacterial activity, stimulate angiogenesis and accelerate wound healing in full thickness rat model

Burns are potentially fatal and physically debilitating injuries, causing psychological and physical scars and result in chronic disabilities. A well vascularized wound bed is required to achieve complete and scar free wound closure. For many centuries, a variety of herbal plants have been used for wound healing, among these aloe vera (AV) has been found to be very effective in wound healing. Secondly, the main reason for delayed wound healing is bacterial infections. Ofloxacin (OX) has been reported as an active antibacterial drug for topical infections and it is effective against both positive and negative bacterial strains. In current research three different concentrations of OX (0.5, 2.5, and 5 mg) were loaded into chitosan (CS)/AV based hydrogels prepared by freeze gelation. The surface morphology of prepared CS/AV based OX loaded hydrogels were evaluated by scanning electron microscopy (SEM). In drug release analysis, 0.5 mg OX loaded hydrogel showed a sustained drug release behavior over 3 days period. An effective dose dependent antibacterial activity was exhibited by OX loaded hydrogels. Alamar Blue cells viability assay revealed that 0.5 mg OX hydrogel (CA 0.5 OX) showed comparatively better 3 T3 fibroblast cells proliferation as compared to CA 2.5 OX (2.5 mg OX) and CA 5 OX hydrogel (5 mg OX). Moreover, all OX loaded hydrogels showed good angiogenic activity in CAM bioassay while higher angiogenic potential was observed from CA 0.5 OX containing comparatively lower concentration of OX. These OX incorporated CS/AV based hydrogels are promising wound dressings for future clinical use.

A combination therapy for androgenic alopecia based on quercetin and zinc/copper dual-doped mesoporous silica nanocomposite microneedle patch

A nanocomposite microneedle (ZCQ/MN) patch containing copper/zinc dual-doped mesoporous silica nanoparticles loaded with quercetin (ZCQ) was developed as a combination therapy for androgenic alopecia (AGA). The degradable microneedle gradually dissolves after penetration into the skin and releases the ZCQ nanoparticles. ZCQ nanoparticles release quercetin (Qu), copper (Cu²⁺) and zinc ions (Zn²⁺) subcutaneously to synergistically promote hair follicle regeneration. The mechanism of promoting hair follicle regeneration mainly includes the regulation of the main pathophysiological phenomena of AGA such as inhibition of dihydrotestosterone, inhibition of inflammation, promotion of angiogenesis and activation of hair follicle stem cells by the combination of Cu²⁺ and Zn²⁺ ions and Qu. This study demonstrates that the systematic intervention targeting different pathophysiological links of AGA by the combination of organic drug and bioactive metal ions is an effective treatment strategy for hair loss, which provides a theoretical basis for development of biomaterial based anti-hair loss therapy.

Effective treatment of intractable diseases using nanoparticles to interfere with vascular supply and angiogenic process

Angiogenesis is a vital biological process involving blood vessels forming from pre-existing vascular systems. This process contributes to various physiological activities, including embryonic development, hair growth, ovulation, menstruation, and the repair and regeneration of damaged tissue. On the other hand, it is essential in treating a wide range of pathological diseases, such as cardiovascular and ischemic diseases, rheumatoid arthritis, malignancies, ophthalmic and retinal diseases, and other chronic conditions. These diseases and disorders are frequently treated by regulating angiogenesis by utilizing a variety of pro-angiogenic or anti-angiogenic agents or molecules by stimulating or suppressing this complicated process, respectively. Nevertheless, many traditional angiogenic therapy techniques suffer from a lack of ability to achieve the intended therapeutic impact because of various constraints. These disadvantages include limited bioavailability, drug resistance, fast elimination, increased price, nonspecificity, and adverse effects. As a result, it is an excellent time for developing various pro- and anti-angiogenic substances that might circumvent the abovementioned restrictions, followed by their efficient use in treating disorders associated with angiogenesis. In recent years, significant progress has been made in different fields of medicine and biology, including therapeutic angiogenesis. Around the world, a multitude of research groups investigated several inorganic or organic nanoparticles (NPs) that had the potential to effectively modify the angiogenesis processes by either enhancing or suppressing the process. Many studies into the processes behind NP-mediated angiogenesis are well described. In this article, we also cover the application of NPs to encourage tissue vascularization as well as their angiogenic and anti-angiogenic effects in the treatment of several disorders, including bone regeneration, peripheral vascular disease, diabetic retinopathy, ischemic stroke, rheumatoid arthritis, post-ischemic cardiovascular injury, age-related macular degeneration, diabetic retinopathy, gene delivery-based angiogenic therapy, protein delivery-based angiogenic therapy, stem cell angiogenic therapy, and diabetic retinopathy, cancer that may benefit from the behavior of the nanostructures in the vascular system throughout the body. In addition, the accompanying difficulties and potential future applications of NPs in treating angiogenesis-related diseases and antiangiogenic therapies are discussed.

Development of antibacterial and superabsorbent wound composite sponges containing carboxymethyl cellulose/gelatin/Cu-doped ZnO nanoparticles

This study aimed to develop a novel antibacterial and superabsorbent dressing by introducing the Cu-doped ZnO nanoparticles into the carboxymethyl cellulose/gelatin glutaraldehyde-crosslinked composite sponge that is fabricated by lyophilization method. Undoped and Cu-doped ZnO (Zn_1-xCu_xO, x = 0.03 and 0.05) nanoparticles were synthesized through the stabilizing agent-used precipitation process and characterized by XRD, FESEM, FTIR, and ICP-OES techniques. The XRD evaluation determined that the concentration of copper in ZnO is limited to below 5%. Additionally, The ICP-OES analysis confirmed the effect of the doping process on the ZnO crystalline structure by releasing more zinc and copper ions from Cu-doped ZnO, which resulted to improve antibacterial activity against Staphylococcus aureus and Escherichia coli bacterial strains. The effect of ZnO nanoparticles on the physical and mechanical performance of the optimized composite sponge indicated that the incorporation of 3 wt% ZnO nanoparticles produces a well-interconnected porous structure (~156 µm) with high water absorption (~3089%) and proper elongation (~49%) in a wet medium. The incorporation of Cu-doped ZnO nanoparticles enhanced antibacterial potential of the composite sponge. Meanwhile, all sponge groups are safe for viability, proliferation and adhesion of human dermal fibroblast cells. Overall, the obtained data has proved the potential of carboxymethyl cellulose/gelatin/Cu-doped ZnO dressing as a promising candidate for managing infected wounds.

Hydroxyapatite-Integrated, Heparin- and Glycerol-Functionalized Chitosan-Based Injectable Hydrogels with Improved Mechanical and Proangiogenic Performance

The investigation of natural bioactive injectable composites to induce angiogenesis during bone regeneration has been a part of recent minimally invasive regenerative medicine strategies. Our previous study involved the development of in situ-forming injectable composite hydrogels (Chitosan/Hydroxyapatite/Heparin) for bone regeneration. These hydrogels offered facile rheology, injectability, and gelation at 37 °C, as well as promising pro-angiogenic abilities. In the current study, these hydrogels were modified using glycerol as an additive and a pre-sterile production strategy to enhance their mechanical strength. These modifications allowed a further pH increment during neutralisation with maintained solution homogeneity. The synergetic effect of the pH increment and further hydrogen bonding due to the added glycerol improved the strength of the hydrogels substantially. SEM analyses showed highly cross-linked hydrogels (from high-pH solutions) with a hierarchical interlocking pore morphology. Hydrogel solutions showed more elastic flow properties and incipient gelation times decreased to just 2 to 3 min at 37 °C. Toluidine blue assay and SEM analyses showed that heparin formed a coating at the top layer of the hydrogels which contributed anionic bioactive surface features. The chick chorioallantoic membrane (CAM) assay confirmed significant enhancement of angiogenesis with chitosan-matrixed hydrogels comprising hydroxyapatite and small quantities of heparin (33 µg/mL) compared to basic chitosan hydrogels.

Nanomaterial-Based Therapy for Wound Healing

Poor wound healing affects millions of people globally, resulting in increased mortality rates and associated expenses. The three major complications associated with wounds are: (i) the lack of an appropriate environment to enable the cell migration, proliferation, and angiogenesis; (ii) the microbial infection; (iii) unstable and protracted inflammation. Unfortunately, existing therapeutic methods have not solved these primary problems completely, and, thus, they have an inadequate medical accomplishment. Over the years, the integration of the remarkable properties of nanomaterials into wound healing has produced significant results. Nanomaterials can stimulate numerous cellular and molecular processes that aid in the wound microenvironment via antimicrobial, anti-inflammatory, and angiogenic effects, possibly changing the milieu from nonhealing to healing. The present article highlights the mechanism and pathophysiology of wound healing. Further, it discusses the current findings concerning the prospects and challenges of nanomaterial usage in the management of chronic wounds.

Zinc Oxide Nanoparticles Exhibit Favorable Properties to Promote Tissue Integration of Biomaterials

Due to the demographic change, medicine faces a growing demand for tissue engineering solutions and implants. Often, satisfying tissue regeneration is difficult to achieve especially when co-morbidities hamper the healing process. As a novel strategy, we propose the incorporation of zinc oxide nanoparticles (ZnO NPs) into biomaterials to improve tissue regeneration. Due to their wide range of biocompatibility and their antibacterial properties, ZnO NPs are already discussed for different medical applications. As there are versatile possibilities of modifying their form, size, and function, they are becoming increasingly attractive for tissue engineering. In our study, in addition to antibacterial effects of ZnO NPs, we show for the first time that ZnO NPs can foster the metabolic activity of fibroblasts as well as endothelial cells, both cell types being crucial for successful implant integration. With the gelatin sponge method performed on the chicken embryo’s chorioallantoic membrane (CAM), we furthermore confirmed the high biocompatibility of ZnO NPs. In summary, we found ZnO NPs to have very favorable properties for the modification of biomaterials. Here, incorporation of ZnO NPs could help to guide the tissue reaction and promote complication-free healing.

Visible-light excitable Eu3+-induced hyaluronic acid-chitosan aggregates with heterocyclic ligands for sensitive and fast recognition of hazardous ions

Water-soluble luminescent lanthanide complexes that can be excited with visible light could enable rapid detection of toxic anions and cations in biological systems. Eu³⁺-induced hyaluronic acid-chitosan aggregates (EIHCA) can improve the stability, biocompatibility, efficiency, and light absorption of luminescent Eu³⁺ complexes. Visible-range excitation may avoid phototoxicity associated with overexposure to UV light in biological and ecological applications. In this work, we synthesized and characterized series of EIHCA complexes having three N-donor heterocyclic ligands: 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (Dphen), 2,2': 6',2″-terpyridine (Tpy) and 1,10-phenanthroline monohydrate (Phen). These complexes possessed bright red fluorescence with a visible range excitation maximum. The photophysical properties of one formulation (we denote as EDL6) include fast quenching response (20 s) of the fluorescence, multi-selectivity, low limit of detection, and high quenching (K_sv) values, enabling selective, rapid and sensitive recognition of Cr₂O₇^2- and Fe³⁺ in aqueous solution. Furthermore, EDL6 exhibits cytocompatibility with mammalian cells that make these complexes promising biocompatible candidate as a safe replacement of organic fluorophores for fluorescence sensing applications. Thus, these new EIHCA complexes were successfully employed for the selective detection of hazardous materials in biological and aqueous environment samples.

Microencapsulation of biosynthesized zinc oxide nanoparticles (ZnO-NPs) using Plumeria leaf extract and kinetic studies in the release of ZnO-NPs from microcapsules

Biosynthesis using plant extract is known as one of the potential techniques to synthesize different zinc oxide nanoparticles (ZnO-NPs) in different size ranges. ZnO-NPs were synthesized using Plumeria leaf extract with laboratory chemical reagent Zn(CH3COO)2 and followed by the micro-encapsulation of biosynthesized ZnO-NPs using chitosan and cellulose with TEOF as a cross-linker employing freeze gelation method. Both neat and encapsulated ZnO-NPs have been characterized by FT-IR, UV spectroscopy, XRD, and SEM techniques. The UV-spectroscopic analysis confirmed the characteristic band of ZnO-NPs at 356.0 nm, and FIIR showed the peaks at 544 cm−1 and 545 cm−1 corresponding to the Zn–O bond. Powder XRD pattern showed the wurtzite structure of ZnO and gave the calculated average crystallite size as of 27.23 nm. In the case of encapsulated ZnO-NPs, the UV–visible spectrum showed two strong absorption peaks at 232.5 nm, 242.5 nm, and a weak peak at 357 nm. A broad peak at 3333 cm−1 in FT-IR spectra is either due to N–H stretching in the amide group of chitosan or hydroxyl group in encapsulated ZnO-NPs. It was observed that chitosan loaded ZnO-NPs had higher entrapment efficiency (81.98%) at 15 mL of plant extract. The kinetic profile in the release of ZnO particles out from encapsulated ZnO-NPs was observed to follow four kinetic paths in 120 min at pH 1.2. The particle release followed the zero-order kinetic in the first 50 min and then followed by Hixson–Crowell kinetic in the next 50 min with two different rate constants, 2.6 × 10−3 min−1 and 13 × 10−3 min−1, before it backs to the zero-order kinetics. This study shows that ZnO nanoparticles can easily be biosynthesized and encapsulated for use in the pharmaceutical industry.

Nanocomposite scaffolds for accelerating chronic wound healing by enhancing angiogenesis

Skin is the body's first barrier against external pathogens that maintains the homeostasis of the body. Any serious damage to the skin could have an impact on human health and quality of life. Tissue engineering aims to improve the quality of damaged tissue regeneration. One of the most effective treatments for skin tissue regeneration is to improve angiogenesis during the healing period. Over the last decade, there has been an impressive growth of new potential applications for nanobiomaterials in tissue engineering. Various approaches have been developed to improve the rate and quality of the healing process using angiogenic nanomaterials. In this review, we focused on molecular mechanisms and key factors in angiogenesis, the role of nanobiomaterials in angiogenesis, and scaffold-based tissue engineering approaches for accelerated wound healing based on improved angiogenesis.

Selective Sensing of Cu2+ and Fe3+ Ions with Vis-Excitation using Fluorescent Eu3+-Induced Aggregates of Polysaccharides (EIAP) in Mammalian Cells and Aqueous Systems

Fluorescent lanthanide complexes have favorable features for fluorescence-based sensors compared to organic fluorophores and quantum dots. They exhibit very long fluorescence lifetimes, sharp emission bands, and stability with respect to photo-bleaching, without blinking. However, these complexes are usually hydrophobic, and many are excited by UV light, making them hazardous and incompatible with aqueous environments and biological samples. In this work, the strong fluorescent Eu³⁺-induced aggregates of polysaccharides (EIAP) was used to improve their aqueous solubility, and to tune the appropriate excitation wavelength in the visible range for avoiding toxicity of UV light in biological applications. The complexes exhibit bright fluorescence with an excitation maximum in the visible range, near 405 nm. EIAP 3 also exhibit rapid quenching response in the presence of transition metal ions. This enables the detection of Cu²⁺ and Fe³⁺ below 1 ppm. The reverse of quenching response of copper by the addition of a chelating agent makes it possible to recover the fluorescence property. Successfully, the EIAP exhibit cytocompatibility with mammalian cells. Thus, these new polysaccharide-based complexes have the potential for rapid, sensitive and selective metal ion sensors for the environmental systems.

Mechano-Informed Biomimetic Polymer Scaffolds by Incorporating Self-Powered Zinc Oxide Nanogenerators Enhance Motor Recovery and Neural Function

Piezoelectric materials can produce electrical power from the mechanical stimulation and thus, they may accelerate electroactive tissue healing as a promising treatment for traumatic peripheral nerve injuries. In this study, a piezoelectric zinc oxide nanogenerator scaffold is manufactured by 3D injectable multilayer biofabrication. The piezoelectric polymeric scaffold displays desirable mechanical and physical characteristics, such as aligned porosity, high elasticity, scaffold stiffness, surface energy, and excellent shear behavior. In addition, its biocompatibility supplies Schwann cells with an adhesive, proliferative, and angiogenic interface, as is reflected by higher expression of functional proteins including nerve growth factor (NGF) and vascular endothelial growth factor (VEGF). In vivo mechanical stimuli by treadmill practice contribute to the comprehensive reparative therapy. The piezoelectric conduit accelerates nerve conducting velocity, promotes axonal remyelination, and restores motor function by recovering endplate muscles. Moreover, the piezoelectric nanogenerator scaffold creates biomimetic electrically conductive microenvironment without causing noticeable toxicity to functioning organs and improves peripheral nerve restoration by the multifunctional characteristics. Therefore, the mechano-informed biomimetic piezoelectric scaffold may have enormous potential in the neuroengineering for regenerative medicine.

Nanoparticle-Based Wound Dressing: Recent Progress in the Detection and Therapy of Bacterial Infections

Bacterial infections in wounds often delay the healing process, and may seriously threaten human life. It is urgent to develop wound dressings to effectively detect and treat bacterial infections. Nanoparticles have been extensively used in wound dressings because of their specific properties. This review highlights the recent progress on nanoparticle-based wound dressings for bacterial detection and therapy. Specifically, nanoparticles have been applied as intrinsic antibacterial agents or drug delivery vehicles to treat bacteria in wounds. Moreover, nanoparticles with photothermal or photodynamic property have also been explored to endow wound dressings with significant optical properties to further enhance their bactericidal effect. More interestingly, nanoparticle-based smart dressings have been recently explored for bacteria detection and treatment, which enables an accurate assessment of bacterial infection and a more precise control of on-demand therapy.

Vascularization strategies for skin tissue engineering

Lack of proper vascularization after skin trauma causes delayed wound healing. This has sparked the development of various tissue engineering strategies to improve vascularization.

Thyroxine-loaded chitosan/carboxymethyl cellulose/hydroxyapatite hydrogels enhance angiogenesis in in-ovo experiments

Angiogenesis is one of the most important processes in repair and regeneration of many tissues and organs. Blood vessel formation also play a major role in repair of dental tissue(s) after ailments like periodontitis. Here we report the preparation of chitosan/carboxymethyl cellulose/hydroxyapatite based hydrogels, loaded with variable concentrations of thyroxin i.e., 0.1 μg/ml, 0.5 μg/ml and 1 μg/ml. Scanning electron microcopy images (SEM) showed all hydrogels were found to be porous and solution absorption study exhibited high swelling potential in aqueous media. FTIR spectra confirmed that the used materials did not change their chemical identity in synthesized hydrogels. The synthesized hydrogels demonstrated good bending, folding, rolling and stretching abilities. The hydrogels were tested in chick chorioallantoic membrane (CAM) assay to investigate their angiogenic potential. Hydrogel containing 0.1 μg/ml of thyroxine showed maximum neovascularization. For cytotoxicity analyses, preosteoblast cells (MC3T3-E1) were seeded on these hydrogels and materials were found to be non-toxic. These hydrogels with pro-angiogenic activity possess great potential to be used for periodontal regeneration.