Encapsulation of Bunium persicum essential oil using chitosan nanopolymer: Preparation, characterization, antifungal assessment, and thermal stability

From waste to protein: a new strategy of converting composted distilled grain wastes into animal feed

Distilled grain waste (DGW) is rich in nutrients and can be a potential resource as animal feed. However, DGW contains as much as 14% lignin, dramatically reducing the feeding value. White-rot fungi such as Pleurotus ostreatus could preferentially degrade lignin with high efficiency. However, lignin derivatives generated during alcohol distillation inhibit P. ostreatus growth. Thus, finding a new strategy to adjust the DGW properties to facilitate P. ostreatus growth is critical for animal feed preparation and DGW recycling. In this study, three dominant indigenous bacteria, including Sphingobacterium thermophilum X1, Pseudoxanthomonas byssovorax X3, and Bacillus velezensis 15F were chosen to generate single and compound microbial inoculums for DGW composting to prepare substrates for P. ostreatus growth. Compared with non-inoculated control or single microbial inoculation, all composite inoculations, especially the three-microbial compound, led to faster organic metabolism, shorter composting process, and improved physicochemical properties of DGW. P. ostreatus growth assays showed the fastest mycelial colonization (20.43 μg·g-1 ergosterol) and extension (9 mm/d), the highest ligninolytic enzyme activities (Lac, 152.68 U·g-1; Lip, 15.56 U·g-1; MnP, 0.34 U·g-1; Xylanase, 10.98 U·g-1; FPase, 0.71 U·g-1), and the highest lignin degradation ratio (30.77%) in the DGW sample after 12 h of composting with the three-microbial compound inoculation when compared to other groups. This sample was relatively abundant in bacteria playing critical roles in amino acid, carbohydrate, energy metabolism, and xenobiotic biodegradation, as suggested by metagenomic analysis. The feed value analysis revealed that P. ostreatus mycelia full colonization in composted DGW led to high fiber content retention and decreased lignin content (final ratio of 5% lignin) but elevated protein concentrations (about 130 g·kg-1 DM). An additional daily weight gain of 0.4 kg/d was shown in cattle feeding experiments by replacing 60% of regular feed with it. These findings demonstrate that compound inoculant consisting of three indigenous microorganisms is efficient to compost DGW and facilitate P. ostreatus growth. P. ostreatus decreased the lignin content of composted DGW during its mycelial growth, improving the quality of DGW for feeding cattle.

Essential oil-loaded biopolymeric particles on food industry and packaging: A review

Essential oils (EOs) are liquid extracts derived from various parts of herbal or medicinal plants. They are widely accepted in food packaging due to their bioactive components, which exhibit remarkable antioxidant and antimicrobial properties against various pathogenic and food spoilage microorganisms. However, the functional efficacy of EOs is hindered by the high volatility of their bioactive compounds, leading to rapid release. Combining biopolymers with EOs forms a complex network within the polymeric matrix, reducing the volatility of EOs, controlling their release, and enhancing thermal and mechanical stability, favoring their application in food packaging or processing industries. This study presents a comprehensive overview of techniques used to encapsulate EOs, the natural polymers employed to load EOs, and the functional properties of EOs-loaded biopolymeric particles, along with their potential antioxidant and antimicrobial benefits. Additionally, a thorough discussion is provided on the widespread application of EOs-loaded biopolymers in the food industries. However, research on their utilization in confectionery processing, such as biscuits, chocolates, and others, remains limited. Further studies can be conducted to explore and expand the applications of EOs-loaded biopolymeric particles in food processing industries.

Encapsulation of Heracleum persicum essential oil in chitosan nanoparticles and its application in yogurt

Heracleum percicum essential oil (HEO) at various levels was encapsulated in chitosan nanoparticles and its potential application in yogurt was investigated. The values obtained for encapsulation efficiency, loading capacity, mean particle size, and zeta potential of nanoparticles were 39.12-70.22%, 9.14-14.26%, 201.23-336.17 nm, and + 20.19-46.37 mV, respectively. The nanoparticles had spherical shape with some holes as a result of drying process. In vitro release studies in acidic solution and phosphate buffer solution indicated an initial burst effect followed by slow release with higher release rate in acidic medium. Results of antibacterial activity revealed that Staphylococcus aureus and Salmonella typhimurium with inhibition zones of 21.04-38.10 and 9.39-20.56 mm were the most sensitive and resistant bacteria to HEO, respectively. Incorporation of encapsulated HEO into yogurt decreased pH and increased titratable acidity due to stimulation of starters' activity. Interaction of nanoparticles with proteins decreased syneresis in yogurt. Regarding antioxidant activity, a higher value was observed in yogurt containing encapsulated HEO after 14 days of storage due to degradation and release of essential oil from nanoparticles. In conclusion, application of HEO nanoparticles in yogurt could be a promising approach for development of functional food products such as yogurt with enhanced antioxidant properties.

Synthesis, characterization, and assessment of chitosan-nanomatrix enriched with antifungal formulation against biodeterioration of active ingredients of selected herbal raw materials

Aflatoxin B₁ (AFB₁), a potent natural group 1 carcinogen produced by Aspergillus flavus is considered an unavoidable toxic contaminant of herbal raw materials, which often deteriorates their active ingredients making them less effective and hazardous during their formulation in herbal drugs. The present investigation reports the antifungal (0.5 μl/ml) and AFB₁ inhibitory (0.4 μl/ml) effects of the developed formulation CIM based on a mixture of essential oils (Carum carvi, and Illicium verum), and methyl anthranilate using mathematical modeling. The insight into the mechanism of action has also been explored using biochemical, molecular docking, and RT-PCR. Further, the nanoencapsulation of CIM (Ne-CIM) was prepared using a green facile synthesis of chitosan-based nanomatrix and characterized by Dynamic light scattering (DLS), Fourier transform-infrared, (FTIR), and X-ray diffraction analysis (XRD). The in-situ results showed that at MIC doses Ne-CIM effectively controls the A. flavus (81.25-89.57 %), AFB₁ contamination (100 %), and protects the active ingredients deterioration of Piper nigrum, P. longum, Andrographis paniculata, Silybum marianum, and Withania somnifera caused by toxigenic species of A. flavus without affecting their sensory properties. Hence, Ne-CIM could be used as a green chemical agent to protect the biodeterioration of active ingredients of herbal raw materials caused by toxigenic species of A. flavus.

Green synthesis of nano-liposomes containing Bunium persicum and Trachyspermum ammi essential oils against Trichomonasvaginalis

BACKGROUND

Trichomonas vaginalis, a parasitic flagellated protozoan, is one of the main non-viral sexually transmitted diseases worldwide. Treatment options for trichomoniasis are limited to nitroimidazole compounds. However, resistance to these drugs has been reported, which requires the development of new anti-Trichomonas agents that confer suitable efficacy and less toxicity.

METHODS

In the present work, we assessed the effectiveness of the liposomal system containing essential oils of Bunium persicum and Trachyspermum ammi against T. vaginalis in vitro. The chemical composition of B. persicum and T. ammi were analyzed using gas chromatography-mass spectrometry (GC-MS). Liposomal vesicles were prepared with phosphatidylcholine) 70%) and cholesterol)30%) using the thin-film method. The essential oils of B. persicum and T. ammi were loaded into the liposomes using the inactive loading method. Liposomal vesicles were made for two plants separately. Their physicochemical features were tested using Zeta-Sizer, AFM and SEM. The anti-Trichomonas activity was determined after 12 and 24 h of parasite cultures in TYI-S-33 medium.

RESULTS

After 12 and 24 h of administration, the IC₅₀ of the B. persicum essential oil nano-liposomes induced 14.41 μg/mL and 45.19 μg/mL, respectively. The IC₅₀ of T. ammi essential oil nano-liposomes induced 8.08 μg/mL and 25.81 μg/mL, respectively.

CONCLUSIONS

These data suggested that nano-liposomes of the essential oils of B. persicum and T. ammi may be a promising alternative to current treatments for Trichomonas infection.

Production, characterization, and antimicrobial activity of almond gum/polyvinyl alcohol/chitosan composite films containing thyme essential oil nanoemulsion for extending the shelf-life of chicken breast fillets

In this study, thyme essential oil (TEO) nanoemulsion was immobilized within composite films based on almond gum (AG), polyvinyl alcohol (PVA), and chitosan (CS). The physical, mechanical, water barrier, microstructural and antimicrobial properties of composite films were assessed. Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the intermolecular interactions in the composite film matrix. The results indicated that the incorporation of TEO into the composite films increased thickness, moisture content, and water vapor permeability, while it reduced light transmittance and transparency value. The antimicrobial activity of films against gram-negative and gram-positive bacteria was tested using a disc diffusion method. The effect of composite on the microbiological properties of chicken breast fillets was investigated during refrigerated storage for 21 days. The microbial populations of total mesophilic, psychrotrophic, and lactic acid bacteria of the samples that were coated with the composite containing TEO were lower than the permitted limit after 21 days while for blank samples they were higher than 7 log CFU/g after 7 days which is considered as the maximum acceptable total count limit. Results disclosed that AG/PVA/CS composite films containing TEO nanoemulsion can be applied as eco-friendly active food packaging to enhance the shelf-life of food products.

Critical Review on Nutritional, Bioactive, and Medicinal Potential of Spices and Herbs and Their Application in Food Fortification and Nanotechnology

Medicinal or herbal spices are grown in tropical moist evergreen forestland, surrounding most of the tropical and subtropical regions of Eastern Himalayas in India (Sikkim, Darjeeling regions), Bhutan, Nepal, Pakistan, Iran, Afghanistan, a few Central Asian countries, Middle East, USA, Europe, South East Asia, Japan, Malaysia, and Indonesia. According to the cultivation region surrounded, economic value, and vogue, these spices can be classified into major, minor, and colored tropical spices. In total, 24 tropical spices and herbs (cardamom, black jeera, fennel, poppy, coriander, fenugreek, bay leaves, clove, chili, cassia bark, black pepper, nutmeg, black mustard, turmeric, saffron, star anise, onion, dill, asafoetida, celery, allspice, kokum, greater galangal, and sweet flag) are described in this review. These spices show many pharmacological activities like anti-inflammatory, antimicrobial, anti-diabetic, anti-obesity, cardiovascular, gastrointestinal, central nervous system, and antioxidant activities. Numerous bioactive compounds are present in these selected spices, such as 1,8-cineole, monoterpene hydrocarbons, γ-terpinene, cuminaldehyde, trans-anethole, fenchone, estragole, benzylisoquinoline alkaloids, eugenol, cinnamaldehyde, piperine, linalool, malabaricone C, safrole, myristicin, elemicin, sinigrin, curcumin, bidemethoxycurcumin, dimethoxycurcumin, crocin, picrocrocin, quercetin, quercetin 4'-O-β-glucoside, apiol, carvone, limonene, α-phellandrene, galactomannan, rosmarinic acid, limonene, capsaicinoids, eugenol, garcinol, and α-asarone. Other than that, various spices are used to synthesize different types of metal-based and polymer-based nanoparticles like zinc oxide, gold, silver, selenium, silica, and chitosan nanoparticles which provide beneficial health effects such as antioxidant, anti-carcinogenic, anti-diabetic, enzyme retardation effect, and antimicrobial activity. The nanoparticles can also be used in environmental pollution management like dye decolorization and in chemical industries to enhance the rate of reaction by the use of catalytic activity of the nanoparticles. The nutritional value, phytochemical properties, health advantages, and both traditional and modern applications of these spices, along with their functions in food fortification, have been thoroughly discussed in this review.

Biotechnological Applications of Nanoencapsulated Essential Oils: A Review

Essential oils (EOs) are complex mixtures of volatile and semi-volatile organic compounds that originate from different plant tissues, including flowers, buds, leaves and bark. According to their chemical composition, EOs have a characteristic aroma and present a wide spectrum of applications, namely in the food, agricultural, environmental, cosmetic and pharmaceutical sectors. These applications are mainly due to their biological properties. However, EOs are unstable and easily degradable if not protected from external factors such as oxidation, heat and light. Therefore, there is growing interest in the encapsulation of EOs, since polymeric nanocarriers serve as a barrier between the oil and the environment. In this context, nanoencapsulation seems to be an interesting approach as it not only prevents the exposure and degradation of EOs and their bioactive constituents by creating a physical barrier, but it also facilitates their controlled release, thus resulting in greater bioavailability and efficiency. In this review, we focused on selecting recent articles whose objective concerned the nanoencapsulation of essential oils from different plant species and highlighted their chemical constituents and their potential biotechnological applications. We also present the fundamentals of the most commonly used encapsulation methods, and the biopolymer carriers that are suitable for encapsulating EOs.

Zingiber officinale essential oil-loaded chitosan-tripolyphosphate nanoparticles: Fabrication, characterization and in-vitro antioxidant and antibacterial activities

Zingiber officinale essential oil (ZEO) was encapsulated in chitosan nanoparticles at different concentrations using the emulsion-ionic gelation technique and its antioxidant and antibacterial effects were investigated. The results indicated that ZEO level had a significant effect on encapsulation efficiency (EE), loading capacity (LC), particle size and zeta potential. The value obtained for EE, LC, mean particle size and zeta potential were 49.11%-68.32%, 21.16%-27.54%, 198.13-318.26 nm and +21.31-43.57 mV, respectively. According to scanning electron micrographs, the nanoparticles had a spherical shape with some invaginations due to the drying process. The presence of essential oil within the chitosan nanoparticles was confirmed by Fourier transform infrared (FTIR) spectroscopy. In vitro release studies in simulated gastrointestinal fluid (SGF) and simulated intestinal fluid (SIF) indicated an initial burst effect followed by slow release with higher release rate in acidic medium of SGF. ZEO-loaded nanoparticles showed DPPH radical scavenging activity of 20%-61% which increased by raising the ZEO level. Moreover, results of antibacterial activity revealed that Staphylococcus aureus (with inhibition zones of 19-35.19 mm2) and Salmonella typhimurium (with inhibition zones of 9.78-17.48 mm2) were the most sensitive and resistant bacteria to ZEO, respectively. Overall, chitosan nanoparticles can be considered as suitable vehicles for ZEO and improve its stability and solubility.

Improving the thermal stability of natural bioactive ingredients via encapsulation technology

Bioactive compounds (bioactives) such as phenolic acids, coumarins, flavonoids, lignans and carotenoids have a marked improvement effect on human health by acting on body tissues or cells. Nowadays, with increasing levels of knowledge, consumers prefer foods that can provide bioactives beside the necessary nutrients (e.g., vitamins, essential fatty acids and minerals). However, an important barrier for incorporating bioactives into foods is their low thermal stability. Nevertheless, thermal processing is widely used by the food industries to achieve food safety and desired texture. The aim of this work is to give an overview of encapsulation technology to improve thermal stability of bioactives incorporated into different food products. Almost all thermal analysis and non-thermal methods in the literature suggest that incorporation of bioactives into different walls can effectively improve the thermal stability of bioactives. The level of such thermal enhancement depends on the strength of the bioactive interaction and wall molecules. Furthermore, contradictory results have been reported in relation to the effect of encapsulation technique using the same wall on thermal stability of bioactives. To date, the potential to increase the thermal resistance of various bioactives by gums, carbohydrates, and proteins have been extensively studied. However, further studies on the comparison of walls and encapsulation methods to form thermally stable carriers seem to be needed. In this regard, the same nature of bioactives and the specific protocol in the report of study results should be considered to compare the data and select the optimum conditions of encapsulation to achieve maximum thermal stability.

Nanodelivery of essential oils as efficient tools against antimicrobial resistance: a review of the type and physical-chemical properties of the delivery systems and applications

This review provides a synthesis of the last ten years of research on nanodelivery systems used for the delivery of essential oils (EOs), as well as their potential as a viable alternative to antibiotics in human and veterinary therapy. The use of essential oils alone in therapy is not always possible due to several limitations but nanodelivery systems seem to be able to overcome these issues. The choice of the essential oil, as well as the choice of the nanodelivery system influences the therapeutic efficacy obtained. While several studies on the characterization of EOs exist, this review assesses the characteristics of the nanomaterials used for the delivery of essential oils, as well as impact on the functionality of nanodelivered essential oils, and successful applications. Two classes of delivery systems stand out: polymeric nanoparticles (NPs) including chitosan, cellulose, zein, sodium alginate, and poly(lactic-co-glycolic) acid (PLGA), and lipidic NPs including nanostructured lipid carriers, solid lipid NPs, nanoemulsions, liposomes, and niosomes. While the advantages and disadvantages of these delivery systems and information on stability, release, and efficacy of the nanodelivered EOs are covered in the literature as presented in this review, essential information, such as the speed of emergence of a potential bacteria resistance to these new systems, or dosages for each type of infection and for each animal species or humans is still missing today. Therefore, more quantitative and in vivo studies should be conducted before the adoption of EOs loaded NPs as an alternative to antibiotics, where appropriate.

Arsenic removal approaches: A focus on chitosan biosorption to conserve the water sources

Globally, millions of people have no access to clean drinking water and are either striving for that or oppressed to intake polluted water. Arsenic is considered one of the most hazardous contaminants in water bodies that reaches there due to various natural and anthropogenic activities. Modified chitosan has gained much attention from researchers due to its potential for arsenic removal. This review focuses on the need and potential of chitosan-based biosorbents for arsenic removal from water systems. Chitosan is a low-cost, abundant, biodegradable biopolymer that possesses unique structural aspects and functional sites for the adsorption of contaminants like arsenic species from contaminated water. The chitosan-based biosorbents had also been modified using various techniques to enhance their arsenic removal efficiencies. This article reviews various forms of chitosan and parameters involved in chitosan modification which eventually affect the arsenic removal efficiency of the resultant sorbents. The literature revealed that the modified chitosan-based sorbents could express higher adsorption efficiency compared to those prepared from native chitosan. The sustainability of the chitosan-based sorbents has also been considered in terms of reusability. Finally, some recommendations have been underlined for further improvements in this domain.

Pesticidal efficacy, mode of action and safety limits profile of essential oils based nanoformulation against Callosobruchus chinensis and Aspergillus flavus

The study explores the pesticidal efficacy, mode of action, and safety limit profile of essential oils-based formulation using the combination of Myristica fragrans (M), Bunium persicum (B), and Zanthoxylum alatum (Z) (1:1:1 v/v/v) and their nanoformulation (Ne-MBZ) against the Callosobruchus chinensis, Aspergillus flavus and aflatoxin B₁ production. Linalool, γ-terpinene, and cuminaldehyde were identified as the major compounds of the formulation (MBZ) by Gas chromatography-mass spectrometry (GC-MS). Nanoencapsulation of developed formulation (Ne-MBZ) was prepared using chitosan and characterized by scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), and Fourier transform infrared spectroscopy (FTIR). The pesticidal efficacy of nanoformulation (Ne-MBZ) against C. chinensis IC₅₀ (0.14 μl/ml), A. flavus (0.8 μl/ml) and AFB₁ (0.8 μl/ml) was significantly higher in both in-vitro and in-situ conditions than the sum of their individual revealing a notable synergistic effect. Besides, the detailed mode of pesticidal action and safety limit profile were explored using biochemical, in-silico and ADMET (absorption, distribution, metabolism, excretion, and toxicity) approaches.

Elucidation of antifungal and aflatoxin B1 inhibitory mode of action of Eugenia caryophyllata L. essential oil loaded chitosan nanomatrix against Aspergillus flavus

The present study investigated the novel antifungal, and anti-aflatoxin B₁ mechanism of Eugenia caryophyllata L. essential oil (ECEO) loaded chitosan nanomatrix against the toxigenic strain of A. flavus (AFLV-DK-02). Phytochemical profiling of ECEO was done by GC-MS which revealed eugenol (73.6%) as the primary bioactive compound. ECEO was encapsulated inside the chitosan nanomatrix (ECEO-Np) and characterized using SEM, AFM, FTIR and XRD analysis. The ECEO-Np exhibited enhance antifungal (0.25 μL/mL) and anti-aflatoxin B₁ inhibitory activity (0.15 μL/mL) than ECEO. Antifungal and antiaflatoxin B₁ inhibitory activity was found to be related with impairment in the biological functioning of the plasma membrane (ergosterol synthesis, leakage of membrane ions, UV light (260, 280 nm) absorbing material, dead cell by propidium iodide assay, mitochondrial membrane potential (MMP), methylglyoxal and inhibition in essential carbon substrate utilization). ECEO-Np exhibited remarkable free radical scavenging activity with IC₅₀ value of 0.002 μL/mL. ECEO-Np effectively preserves the sensory characteristics of exposed maize crop seed up to six months of storage and shows considerable safety profile (non-toxic, non-mutagenic, non-hepatotoxic, non-carcinogenic, non-tumorigenic and biodegradable) using computational ADMET (absorption, distribution, metabolism, excretion, and toxicity) analysis.

Encapsulation of essential oils using cinnamic acid grafted chitosan nanogel: Preparation, characterization and antifungal activity

Chemical modifications in the chitosan structure may result in obtaining a new material with improved chemical properties, such as an ability to encapsulate lipophilic compounds. This study aimed to synthesize cinnamic acid grafted chitosan nanogel to encapsulate the essential oils of Syzygium aromaticum and Cinnamomum ssp., in order to develop a material to be applied in the control of dermatophytosis caused by the fungus Microsporum canis. The cinnamic acid graft in chitosan was verified by the Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR), Solid State Nuclear Magnetic Resonance of the ¹³C Nucleus (¹³C SSNMR) and Thermal analysis coupled to mass spectrometry (TG-MS) techniques. The nanogel obtained showed affinity for the essential oils of S. aromaticum and Cinnamomum, with encapsulation efficiencies equal to 74% and 89%, respectively. When in an aqueous medium the nanogel with the encapsulated essential oils was able to form stable nanoparticles with average sizes of 176.0 ± 54.3 nm and 263.0 ± 81.4 nm. The cinnamic acid grafted chitosan nanogel showed antifungal activity in vitro against M. canis, inhibiting up to 53.96% of its mycelial growth. Complete inhibition of mycelial growth was achieved by the nanogel with encapsulated essential oils. The results found in this work demonstrated the development of a material with potential application in the control of dermatophytosis caused by the fungus M. canis.

Eugenol loaded chitosan nanoemulsion for food protection and inhibition of Aflatoxin B1 synthesizing genes based on molecular docking

The present investigation entails the fabrication and characterization of nanometric emulsion of eugenol (Nm-eugenol) encompassed into chitosan for assessing bio-efficacy in terms of in vitro antifungal actions, antiaflatoxigenic potential, and in situ preservative efficacy against Aspergillus flavus infestation and aflatoxin B₁ (AFB₁) mediated loss of dietary minerals, lipid triglycerides and alterations in composition of important macronutrients in stored rice. Nm-eugenol characterized by SEM, XRD, and FTIR exhibited biphasic burst release of eugenol. Reduction in ergosterol and methylglyoxal (AFB₁-inducer) content after Nm-eugenol fumigation depicted biochemical mechanism of antifungal and antiaflatoxigenic activities. In silico 3D homology docking of eugenol with Ver-1 gene validated molecular mechanism of AFB₁ inhibition. Further, significant protection of rice seeds from fungi, AFB₁ contamination and preservation against loss of rice minerals, macronutrients and lipids during storage suggested deployment of chitosan as a biocompatible wall material for eugenol encapsulation and application as novel green preservative for food protection.

Antibacterial, Antifungal, Antimycotoxigenic, and Antioxidant Activities of Essential Oils: An Updated Review

The interest in using natural antimicrobials instead of chemical preservatives in food products has been increasing in recent years. In regard to this, essential oils-natural and liquid secondary plant metabolites-are gaining importance for their use in the protection of foods, since they are accepted as safe and healthy. Although research studies indicate that the antibacterial and antioxidant activities of essential oils (EOs) are more common compared to other biological activities, specific concerns have led scientists to investigate the areas that are still in need of research. To the best of our knowledge, there is no review paper in which antifungal and especially antimycotoxigenic effects are compiled. Further, the low stability of essential oils under environmental conditions such as temperature and light has forced scientists to develop and use recent approaches such as encapsulation, coating, use in edible films, etc. This review provides an overview of the current literature on essential oils mainly on antifungal and antimycotoxigenic but also their antibacterial and antioxidant activities. Additionally, the recent applications of EOs including encapsulation, edible coatings, and active packaging are outlined.

Anti-bacterial activity of chitosan loaded plant essential oil against multi drug resistant K. pneumoniae

The development of antibiotic resistant in K. pneumoniae is an emerging thread worldwide due to the poor antimicrobial drugs. To overcome this issue, researchers are focused on plant material and their essential oils to fight against multi drug resistant bacteria. In this context, the current study was concentrated in medicinal plant of guva leaves and their essential oils to combat multi drug resistant bacterial infections. The essential oils were successfully screened and confirmed by HRLC-MS analysis. The anti-bacterial ability of the compounds were loaded into the chitosan nanoparticles and proved by FT-IR analysis. In addition, the chitosan loaded essential oils morphology was compared with chitosan alone in SEM analysis and suggested that the material was loaded successfully. Further, the anti-bacterial ability of the chitosan loaded essential oils were primarily confirmed by agar well diffusion method. At the 100 µg/mL of lowest concentration of chitosan loaded essential oils, the multi-drug resistant K. pneumoniae was inhibited with 96% and confirmed by minimum inhibition concentration experiment. Hence, all the experiments were proved that the essential oils were successfully loaded into the chitosan nanoparticles, and it has more anti-bacterial activity against multi-drug resistant K. pneumoniae.