Macromolecular humic acid modified nano-hydroxyapatite for simultaneous removal of Cu(II) and methylene blue from aqueous solution: Experimental design and adsorption study

Optimization by Box-Behnken design for environmental contaminants removal using magnetic nanocomposite

In this study, a CoO-Fe2O3/SiO2/TiO2 (CIST) nanocomposite was synthesized and utilized as an adsorbent to remove methylene blue (MB), malachite green (MG), and copper (Cu) from aqueous environments. The synthesized nanocomposite was characterized using field emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and X-ray diffraction (XRD). Input parameters included pH (3-10), contact time (10-30 min), adsorbent amount (0.01-0.03 g), and pollutant concentration (20-60 mg L-1). The effects of these parameters on the removal process efficiency were modeled and optimized using the response surface methodology (RSM) based on the Box-Behnken design (BBD). The RSM-BBD method demonstrated the capability to develop a second-degree polynomial model with high validity (R2 ˃ 0.99) for the removal process. The optimization results using the RSM-BBD method revealed a removal efficiency of 98.01%, 93.06%, and 88.26% for MB, MG, and Cu, respectively, under optimal conditions. These conditions were a pH of 6, contact time of 10 min, adsorbent amount of 0.025 g, and concentration of 20 mg L-1. The synthesized adsorbent was recovered through five consecutive adsorption-desorption cycles using hydrochloric acid. The results showed an approximately 12% reduction from the first to the seventh cycle. Also, MB, MG, and Cu removal from real water samples in optimal conditions was achieved in the range of 81.69-98.18%. This study demonstrates the potential use of CIST nanocomposite as an accessible and reusable option for removing MB, MG, and Cu pollutants from aquatic environments.

Synthesis of a novel porous organic polymer containing triazine and cyclohexanone rings as an efficient methyl red adsorbent from aqueous solutions

In this research, a new porous organic polymer based on triazine and cyclohexanone rings was synthesized via Schiff base condensation, and its performance as an adsorbent for the removal of Methyl Red dye from aqueous solution was investigated. The synthesized polymer was characterized by FT-IR, XRD, SEM, EDS, TEM, TGA, and BET analyses. Five important parameters of pH (4-10), contact time (10-120 min), adsorbent dose (5-10 mg), initial dye concentration (10-70 mg/L), and temperature (25-45 °C) were investigated to optimize the adsorption conditions. Solution pH of 4, contact time of 80 min, adsorbent dose of 8 mg, initial dye concentration of 50 mg/L, and temperature of 45 °C were obtained as the best conditions for the adsorption of methyl red dye. Two widely used Langmuir and Freundlich models were employed to investigate the adsorption isotherm, and the obtained data showed that the adsorption process follows the Langmuir isotherm with a correlation coefficient (R2 = 0.9784) which indicates monolayer adsorption. The achieved maximum adsorption capacity was 178.57 mg/g. Also, the results of kinetic studies indicate that the adsorption process follows the pseudo-second-order kinetic, which suggests that chemical interactions play an important role in dye removal. Furthermore, the results showed that the adsorption process of methyl red dye by polymer is endothermic.

Functional MOF-Based Materials for Environmental and Biomedical Applications: A Critical Review

Over the last ten years, there has been a growing interest in metal-organic frameworks (MOFs), which are a unique category of porous materials that combine organic and inorganic components. MOFs have garnered significant attention due to their highly favorable characteristics, such as environmentally friendly nature, enhanced surface area and pore volume, hierarchical arrangements, and adjustable properties, as well as their versatile applications in fields such as chemical engineering, materials science, and the environmental and biomedical sectors. This article centers on examining the advancements in using MOFs for environmental remediation purposes. Additionally, it discusses the latest developments in employing MOFs as potential tools for disease diagnosis and drug delivery across various ailments, including cancer, diabetes, neurological disorders, and ocular diseases. Firstly, a concise overview of MOF evolution and the synthetic techniques employed for creating MOFs are provided, presenting their advantages and limitations. Subsequently, the challenges, potential avenues, and perspectives for future advancements in the utilization of MOFs in the respective application domains are addressed. Lastly, a comprehensive comparison of the materials presently employed in these applications is conducted.

Synthesis and characterization of a novel N-rich porous organic polymer and its application as an efficient porous adsorbent for the removal of Pb(II) and Cd(II) ions from aqueous solutions

In this study, a novel N-rich triazine-based porous organic polymer (NR-POP) was synthesized via Schiff-base condensation. The structure of the synthesized porous polymer was identified using FT-IR, XRD, SEM, EDS, TEM, TGA, and BET analyses. The adsorption efficiency of this polymer was investigated for the removal of lead and cadmium ions pollutants. The adsorption processes of Pb(II) and Cd(II) metal ions by this polymer adsorbent were exothermic and matched by the Langmuir isotherm with a high correlation coefficient (R² = 0.9904, 0.9778), the maximum adsorption capacity (833.33, 178.57 mg g^-1), and the pseudo-second-order kinetic model. Furthermore, NR-POP showed an excellent adsorption selectivity for Pb(II) compared to Cd(II).

Application of humic acid and hydroxyapatite in Cd-contaminated alkaline maize cropland: A field trial

Soil quality is critical to the quality and safety of agricultural products, and remediation of heavy metal contaminated soils is an urgent task to be implemented. This study applied hydroxyapatite (HAP) and humic acid (HA) as remediation materials to Cd-contaminated alkaline cropland. Data on soil pH, electrical conductivity (EC), cation exchange capacity (CEC), soil organic matter (SOM), diethylenetriamine pentaacetic acid (DTPA) extraction, and improved BCR sequential extraction were obtained for different periods. The joint application of HAP and HA enhanced the soil's buffering capacity. During the experiment, treatment groups CK, H1, H2, H3, and H4 showed changes in pH of 0.29, 0.28, 0.21, 0.24, and 0.32, respectively, and changes in the conductivity of 341.4, 183.0, 133.1, 104.6 and 320.2 μS/cm. Soil organic matter had a positive effect on soil's effective phosphorus content. HAP and HA both reduced the BCF_grain/soil of Cd for the maize, but the impact of HA was more substantial (20.19 % reduction compared to CK). HA increased the yield of maize by 44.20 %. The combination of HA and HAP was recommended.

Removal of bisphenol A and methylene blue through persulfate activation by calcinated α-MnO2 nanorods: effect of ultrasonic assistance and toxicity assessment

This work investigates the efficacy of α-MnO₂ nanorods for persulfate-mediated degradation of bisphenol A (BPA) and methylene blue (MB), in silent and ultrasonic-assisted systems. The conversion of α-MnO₂ nanoparticle flakes to nanorods occurs upon calcination at a temperature of 400 °C for 3 h under the ramping conditions. The comparative characterization of nanomaterials pre- and post-calcination reveals better physical, chemical, and thermal properties of α-MnO₂ nanorods. The impact of various operational parameters such as pH, dosage of nanorods, persulfate dose, selected contaminant concentration, ultrasound frequency and power, scavengers, and landfill leachate medium on the degradation of pollutants is also assessed. The ultrasonic assistance yields higher removal for both BPA and MB than the silent system. This may be attributed to the generation of more radicals as ultrasound activates persulfate. This can be due to acoustic cavitation, which leads to better solute dissociation and excited state. The results obtained through scavenger tests reveal that both OH^• and SO₄^•- can contribute to degradation, but the role of SO₄^•- is found dominant. Significant removal of BPA and MB ((BPA)_silent, 87.12%; (MB)_silent, 96.54%; (BPA)_ultrasonic, 88.75%; (MB)_ultrasonic, 93.86%)) is observed in landfill leachate medium. The degradation pathway for pollutants is also proposed. The toxicity of pollutants and their degradation intermediates are evaluated using Ecological Structure Activity Relationships (ECOSAR) program. The results indicate reduced toxicity of BPA intermediates, while most MB degradation intermediates show higher toxicity. Therefore, it can be affirmed that removing pollutants does not ensure a completely non-toxic process. However, the study proposes a comprehensive toxicity evaluation and eliminating toxic intermediates for completely harmless wastewater treatment.

Nanotechnology- A ray of hope for heavy metals removal

Environmental effects of heavy metal pollution are considered as a widespread problem throughout the world, as it jeopardizes human health and also reduces the sustainability of a cleaner environment. Removal of such noxious pollutants from wastewater is pivotal because it provides a propitious solution for a cleaner environment and water scarcity. Adsorption treatment plays a significant role in water remediation due to its potent treatment and low cost of adsorbents. In the last two decades, researchers have been highly focused on the modification of adsorption treatment by functionalized and surface-modified nanomaterials which has spurred intense research. The characteristics of nano adsorbents attract global scientists as it is also economically viable. This review shines its light on the functionalized nanomaterials application for heavy metals removal from wastewater and also highlights the importance of regeneration of nanomaterials in the view of visualizing the economic aspects along with a cleaner environment. The review also focused on the proper disposal of nanomaterials with crucial issues that persist in the adsorption process and also emphasize future research modification at a large-scale application in industries.

In situ synthesis of magnesium-doped hydroxyapatite aerogel for highly efficient U(VI) separation with ultra high adsorption capacity and excellent recyclability

Mg-doped HAP aerogel (MHAPA) was firstly in situ prepared via freeze-drying-calcination technology to capture U(VI). The U(VI) removal capacity by MHAPA even arrived 2685.6 mg g^-1, which was about 2 times over purchased HAP, illustrating that the incorporation of Mg ions could greatly enhance the U(VI) removal capacity. Compared with HAP, MHAPA also showed better anti-ion interference ability and dynamic removal performances. In comparison with other HAP-based adsorbents, MHAPA possessed good recyclability and its desorption rate was up to 93.4% in the first cycle. The excellent U(VI) removal performances of MHAPA might be owing to its low crystallinity and grain size, fast ion exchange rate and partial ionization under acidic conditions, which would accelerate the process of electrostatic attraction, ion-exchange, and complexation to immobilize U(VI). To sum up, the prepared MHAPA was expected to be an environmentally friendly, recyclable and effective adsorbent to immobilize U(VI) in actual wastewater.

Valorization of sugarcane bagasse for sugar extraction and residue as an adsorbent for pollutant removal

Following juice crushing for sugar or bioethanol production from sugarcane, bagasse (SCB) is generated as the main lignocellulosic by-product. This study utilized SCB generated by a hydraulic press as feedstock to evaluate sugar extraction as well as adsorption potential. Total soluble sugar (sucrose, glucose, and fructose) of 0.4 g/g SCB was recovered with H2O extraction in this case. Insoluble sugar, that is, cellulose in SCB, was further hydrolyzed into glucose (2%–31%) with cellulase enzyme, generating a new bagasse residue (SCBE). Persulfate pretreatment of SCB slightly enhanced saccharification. Both SCB and SCBE showed great potential as adsorbents with 98% of methylene blue (MB) removed by SCB or SCBE and 75% of Cu2+ by SCBE and 80% by SCB in 60 min. The maximum adsorption amount (qm) was 85.8 mg/g (MB by SCB), 77.5 mg/g (MB by SCBE), 3.4 mg/g (Cu2+ by SCB), and 1.2 mg/g (Cu2+ by SCBE). The thermodynamics indicated that the adsorption process is spontaneous, endothermic, and more random in nature. The experimental results offer an alternative to better reutilize SCB.

Effective Immobilization of Monomeric Methylene Blue on Hydroxyapatite Nanoparticles by Controlling Inorganic-Organic Interfacial Interactions

We successfully synthesized methylene blue (MB⁺)-immobilized hydroxyapatite (HM) nanoparticles by changing the initial P/Ca molar ratio. The immobilized amount of MB⁺ increased with increasing the initial P/Ca molar ratio from 0.6 to 4.0, and the HM had an elliptical shape (long length, 21-24 nm; short length, 11-13 nm) irrespective of the initial P/Ca molar ratio. Upon increasing the initial P/Ca molar ratio, the number of carbonate ions on the HM surface decreased, which would be owing to the electrostatic repulsion by the surface phosphate ions (i.e., P-O^-), the surface P-OH mainly dissociated to form P-O^-, and the electrostatic interaction of P-O^- with MB⁺ enhanced. The bonding of MB⁺ with surface P-OH and Ca²⁺ sites of hydroxyapatite would be hydrogen-bonding and Lewis acid-base interactions, respectively. The optimum synthesis condition for MB⁺ immobilization at the monomer state was found to be the initial P/Ca molar ratio of 2.0. Here, the existence percentage of the MB⁺ monomer and the molecular occupancy of the surface carbonate ion at the initial P/Ca molar ratio of 2.0 were higher than those at 4.0 with no significant difference in the immobilized amount of MB⁺, indicating that MB⁺ at the initial P/Ca molar ratio of 4.0 is more aggregated than that at 2.0. These results suggested that a part of carbonate ions has a role as a spacer to suppress MB⁺ aggregation. Accordingly, the interfacial interactions between the MB⁺ monomer and the hydroxyapatite surface were clarified, which can effectively be controlled by the initial P/Ca molar ratio. These findings will provide fundamental and useful knowledge for the design of calcium phosphate-organic nanohybrids. We believe that these particles will be the base materials to realize diagnostic and/or therapeutic functions through the molecular state control by optimizing the synthesis conditions.

Hydroxyapatite-based adsorbents: Applications in sequestering heavy metals and dyes

Hydroxyapatite (HAp) is a calcium phosphate material that was used primarily in bone regeneration and repair as a result of its chemical similarity with bone. However, HAp has emerged as a very promising adsorbent for sequestering contaminants like heavy metals, dyes, hydrocarbons as well as other emerging pollutants from wastewater as a result of its versatility and encouraging adsorptive properties. Contaminants like heavy metals and dyes have been a major source of environmental concern. Research studies involving the use of HAp as adsorbents for the adsorptive treatment of heavy metal- and dye-contaminated wastewater have become increasingly popular due to its eco-friendliness, easy synthesis, unique adsorption properties etc. Various methods are available for the synthesis of HAp and its composites with some of these methods used in combination with other methods to obtain more efficient HAp-based adsorbents. In this work, the adsorptive removal of heavy metals and dyes by HAp and its composites was extensively reviewed as well as the parametric effects of process factors like contact time, solution pH, temperature, solute concentration etc on the adsorption process. Kinetic, thermodynamic, and isotherm models for elucidating the adsorption process were also considered. Generally, from the works reviewed, HAp-based adsorbents were found to be very effective for sequestering heavy metals and dyes from solution and thus presents a low-cost option for adsorptive wastewater treatment.

Abiotic factors and aging alter the physicochemical characteristics and toxicity of Phosphorus nanomaterials to zebrafish embryos

Nanoscale phosphorus (P)-based formulations are being investigated as potentially new fertilizers to overcome the challenges of conventional bulk P fertilizers in agriculture, including low efficacy rates and high application levels. After agricultural applications, the NMs may be released into aquatic environments and transform over time (by aging) or in the presence of abiotic factors such as natural organic matter or sunlight exposure. It is, therefore, important to investigate the physicochemical changes of NMs in environmentally realistic conditions and assess their potential acute and sublethal toxic effects on aquatic organisms. To investigate this, two separate studies were conducted: 1. the effects of 3-months aged P-based NMs on zebrafish embryos, and 2. the influence of humic acid (HA), UV exposure, or a combination of both on P-based NM toxicity in zebrafish embryos. Four different types of nanohydroxyapatites (nHAPs) and a nanophosphorus (nP) were included in the study. These NMs differed in their physicochemical properties, most prominently their shape and size. Environmental transformations were observed for P-based NMs due to aging or interaction with abiotic factors. The aging of the NMs increased the hydrodynamic diameter (HDD) of rod- and needle-shaped NMs and decreased the size of the platelet and spherical NMs, whereas interactions with HA and UV decreased the NMs' HDD. It was observed that no LC₅₀ (survival) and IC₅₀ (hatch and heart rates) were obtained when the zebrafish embryos were exposed to the aged NMs or when NMs were added in the presence of HA and UV. Overall, these results suggest that P-based NMs cause no acute toxicity and minimal sub-lethal toxicity to zebrafish embryos in environmentally realistic experimental conditions.

Insights into the adsorption mechanism of tannic acid by a green synthesized nano-hydroxyapatite and its effect on aqueous Cu(II) removal

The polyphenolic tannic acid (TA) has been widely used in the stabilization and surface modification of nanomaterials. The interaction mechanism of TA with the biogenic nano-hydroxyapatite (nHAP) and its environmental importance, however, are poorly understood. This study explored the adsorption of TA using the green synthesized, eggshell-derived nHAP and implications of this process for the removal of aqueous Cu(II) via batch adsorption experiments, Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) investigations. TA adsorption by nHAP was a complex pH-dependent process and significantly correlated with TA molecule speciation and amphoteric properties of nHAP via multiple adsorption modes including surface complexation, electrostatic attraction, and hydrogen bond. The maximum TA adsorption amount was found to be 94.8 mg/g for less crystalline nHAP with lower calcination temperature. In the ternary Cu-TA-nHAP systems, TA promoted Cu(II) adsorption at pH < 5 and reduced Cu(II) uptake at pH > 5. Further studies of the effects of ionic strength and addition sequences, as well as Raman, FTIR, and XPS analyses revealed Cu(II) adsorption on nHAP was mainly dominated by inner-sphere surface complexation. These results can shed light on not only the utility of biogenic nHAP for TA and Cu(II) adsorption but also the evaluation of the effect of TA on the environmental behavior of heavy metals.

Effects of humic acid on sludge performance, antibiotics resistance genes propagation and functional genes expression during Cu(II)-containing wastewater treatment via metagenomics analysis

The humic acid (HA) function on the sludge performance, antibiotics resistance genes (ARGs) propagation and functional genes expression during Cu(II)-containing wastewater treatment was comprehensively investigated via metagenomics analysis. Results showed that the pollutants removal was significantly inhibited after long-term exposure of 5 mg/L Cu(II), while the inhibitory effects were moderately alleviated after addition of 10 mg/L HA. The extracellular polymeric substances (EPS) production with Cu(II) acclimation was higher than the sludge with Cu(II) and HA acclimation. The microbial community was significantly affected by the HA addition, while the relative abundance of dominant ARGs had no distinct differences with or without HA addition under Cu(II) stress. The functional genes were largely implemented for microbial metabolism, while no significant differences were found with HA addition under Cu(II) stress. Thus, the HA function for ARGs propagation and functional genes expression needed to be further research under Cu(II) stress in wastewater treatment.

Hydroxyapatite modified sludge-based biochar for the adsorption of Cu2+ and Cd2+: Adsorption behavior and mechanisms

This study prepared sewage sludge, a municipal solid waste, into a biochar modified by hydroxyapatite (HAP) as a new and efficient absorbent (HAP-SSBC) for removal of Cu²⁺ and Cd²⁺ from aqueous solution. Adsorption experiment revealed that HAP-SSBC exhibited significantly higher adsorption performance than raw sludge-based biochar (SSBC). At 298.15 K, the maximum adsorption capacity of Cu²⁺ and Cd²⁺ via Langmuir model were 89.98 and 114.68 mg/g, respectively. Adsorption kinetic experiment revealed that chemisorption was the main reaction. Analysis of X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectrum (XPS) further confirmed that the main mechanisms were ion exchange with Ca²⁺, complexion by -OH and -COOH, and forming Cu-π or Cd-π binding with aromatic CC on HAP-SSBC surface. Overall, combing HAP and SSBC to be a new adsorbent is beneficial to the resource utilization of sludge and shows a good prospect for heavy metal removal in aqueous solution.

Removal of Polycyclic Aromatic Hydrocarbons in a Heterogeneous Fenton Like Oxidation System Using Nanoscale Zero-Valent Iron as a Catalyst

Oil and gas effluents contains highly toxic and harmful organic pollutants. Therefore, it is necessary to eliminate and/or reduced the concertation of organic pollutants to a technologically acceptable levels before their discharge into water streams. This study investigates the application of nanoscale zero-valent iron (nZVI), and hydrogen peroxide (H2O2) for removal of organic pollutants from real oily produced water. Batch studies were performed and effect of different operating parameters, including concentration of nZVI and H2O2, pH and reaction time were studied. Moreover, optimization of independent variables was performed using central composite design (CCD) in response surface methodology (RSM). The experimental set up provided maximum removal efficiencies of 89.5% and 75.3% for polycyclic aromatic hydrocarbons (PAHs) and chemical oxygen demand (COD), respectively. The optimum values of independent variables such as concentrations of nZVI, and H2O2, contact time and pH were obtained as 4.35 g/L, 1.60 g/L, 199.9 min and 2.9, respectively. Predicted PAHs and COD removal efficiencies at the optimum values of independent variables were found as 89.3% and 75.7%, respectively which are in line with the experimental values. The study indicates that application of heterogeneous Fenton like oxidation system using nZVI as a catalyst is an efficient treatment method for removal of organic pollutants from real produced water.