Thermally induced gluten modification observed with rheology and spectroscopies

Evaluating the effects of insoluble date fruit (Phoenix dactylifera L.) fibers on meat analogue patties composed of pea and wheat protein isolates

This study aimed to evaluate the effects of date pomace fibers (DF) on the physicochemical properties of plant-based ground patty analogues. Previously optimized pea and wheat protein isolates were incorporated with varying concentrations of DF, i.e., 0 %, 2.5 %, 5 %, 7.5 %, and 10 % w/w. The addition of DF increased water retention in the patties, leading to subsequent changes in the patty structure. Frequency sweep results confirmed that the presence of DF contributed to structural stability, where patties exhibited more solid-like characteristics and stronger internal bonds, which also increased hardness from ∼65 g to 160-175 g. This could positively correlate with the brittleness of the patties, where large deformation results showed that high DF formulations were more brittle, which reduced springiness, as evident in DF7.5 (from ∼2 mm in DF0 to 1.89 mm in DF7.5). The microstructure revealed that high DF content increased patty fibrousness and led to a uniform structure. Therefore, high DF concentrations seemed to positively impact the analogue structure. DF also contributed to patty analogue color by imparting brown-red tones which may result in a closer appearance to conventional beef patties. This study establishes a foundation for further studies to be conducted on determining the optimum DF concentration that yields patty analogues with desirable structure as well as appearance.

Impact of processing and storage on citrus fiber functionality: Insights from spectroscopic techniques

To deliver their functionality when used in applications, citrus fibers need to be rehydrated. Factors such as chemical composition, structural organization as well as chemical surface composition are known to influence this functionality. Processing and storage conditions can affect these parameters, making it challenging to maintain stable functionality. This study used Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) to evaluate the effects of preparation and storage on citrus fibers. Samples dried at different scales and stored for 360 days under room and accelerated conditions were assessed for water holding capacity (WHC), water swelling capacity (WSC), and gel rigidity (G'). The results showed a decline in WHC, WSC, and G' over time, confirming that aging negatively impacts moisture retention, particularly under higher water content or temperature. Drying scale had no effect on chemical composition or structure, but changes in the elemental surface composition of carbon and oxygen were noted. While prolonged storage altered the polysaccharides' chemical composition and structure, leading to functionality loss, XPS analysis revealed no changes in surface composition. Loss of functionality cannot be explained by chemical surface composition modifications.

Effect of ultrasound treatment on porcine myofibrillar protein binding furan flavor compounds at different salt concentrations

The effects of ultrasound (500 W) on the interaction of porcine myofibrillar protein (MP) with furan flavor compounds at different salt concentrations (0.6 %, 1.2 % and 2.4 %) were investigated. With the increase of salt concentration, the particle size of MP decreased, and the surface hydrophobicity and active sulfhydryl content increased due to the unfolding and depolymerization of MP. At the same time, ultrasound promoted the exposure of hydrophobic binding sites and hydrogen bonding sites of MP in different salt concentration systems, thus improving the binding ability of MP with furan compounds by 2 % to 22 %, among which MP had the strongest binding capacity of 2-pentylfuran. In conclusion, ultrasound could effectively promote the unfolding of the secondary structure of MP, which was beneficial to the combination of MP and furan flavor compounds under different salt concentrations.

Thermomechanical Stress Analysis of Hydrated Vital Gluten with Large Amplitude Oscillatory Shear Rheology

Vital gluten is increasingly researched as a non-food product for biodegradable materials. During processing, the protein network is confronted with increased thermal and mechanical stress, altering the network characteristics. With the prospect of using the protein for materials beyond food, it is important to understand the mechanical properties at various processing temperatures. To achieve this, the study investigates hydrated vital gluten under thermomechanical stress based on large amplitude oscillatory shear (LAOS) rheology. LAOS rheology was conducted at increasing shear strains (0.01-100%), various frequencies (5-20 rad/s) and temperatures of 25, 45, 55, 65, 70 and 85 °C. With elevating temperatures up to 55 °C, the linear viscoelastic moduli decrease, indicating material softening. Then, protein polymerization and the formation of new cross-links due to thermal denaturation cause more network connectivity, resulting in significantly higher elastic moduli. Beyond the linear viscoelastic regime, the strain-stiffening ratio rises disproportionately. This effect becomes even more evident at higher temperatures. Lacking a viscous contribution, the highly elastic but also stiff network shows less mechanical resilience. Additionally, at these elevated temperatures, structural changes during the protein's denaturation and network shrinkage due to water evaporation could be visualized with confocal laser scanning microscopy (CLSM).

Soy Protein Amyloid Fibril Scaffold for Cultivated Meat Application

It is important to have sustainable and edible scaffolds to produce cultivated meat. In this research, three-dimensional (3D) porous scaffolds were developed by soy protein amyloid fibrils for cultivated meat applications. Food-safe biological and physical cross-linking methods using microbial transglutaminase and temperature-controlled water vapor annealing technique were employed to crosslink soy protein amyloid fibrils, resulting in the production of 3D scaffolds. The generated 3D scaffolds had pores with sizes ranging from 50 to 250 μm, porosities of 72-83%, and compressive moduli of 3.8-4.2 kPa, depending on the type of soy protein used in the process (β-conglycinin (7S), glycinin (11S) and soy protein isolate (SPI)). When present with pepsin, these scaffolds can degrade within an hour but remain stable in phosphate-buffered saline for at least 30 days. The soy protein amyloid fibril scaffolds enabled C2C12 mouse skeletal myoblasts proliferate and differentiate without adding cell adhesive proteins or other coatings. The results demonstrate the potential of abundant and inexpensive soy protein amyloid fibrils to be utilized as scaffold materials for cultivated meat in the food industry.

Study of Physico-Chemical Properties of Dough and Wood Oven-Baked Pizza Base: The Effect of Leavening Time

The research objective was to investigate the morpho-rheological, chemical, and structural changes of dough and Neapolitan pizza TSG as the leavening time varies and to evaluate their effects on the digestibility of starch and on the formation of acrylamide during baking. Pizza dough leavening was monitored for 48 h at 22 °C/80% RH, and the analyses were conducted at selected leavening times (0, 4, 8, 16, 24, and 48 h). It was observed that in 30 h the volume tripled and the viscoelastic dough relaxed in the first 4 h, as evidenced by the lower value of the relaxation percentage “a” and the higher rate of decay “b”, associated with a high value of the compression work, indicating the presence of a very strong gluten mesh. In the following hours, the dough lost elasticity, and in fact, the G’ modulus decreased due to the weakening of the weak interactions between the gluten proteins and the starch. This suggests that a long leavening improved the extensibility of the pizza disc, facilitating the action of the pizza maker. Thermal (TGA and DSC) and morphological (SEM) analyses evidenced the highest water removal rate from the dough, a wider starch gelatinization temperature range, a ∆H of 0.975 ± 0.013 J/g, and a more open and weak gluten structure in dough balls leavened for 16 h. As the leavening time increased, both dough and pizza base samples showed an increase in reducing sugars and free amino groups, while the rapidly digestible starch decreased in the dough following the metabolism of the yeasts and increased in the pizza base due to the starch gelatinization that occurs during baking, which makes it much more susceptible to α-amylase. Finally, the levels of acrylamide remained at the same values despite the higher availability of reducing sugars and its precursors during leavening.

A dynamic micro-scale dough foaming and baking analysis - Comparison of dough inflation based on different leavening agents

Leavening agents play a pivotal role in the production of baked goods. Through gas production the inner structure of the product gets its typical foam structure and textural appearance. Baking trials are thereby a common way to determine the achievable loaf volume, crumb structure and other product specific properties. The required material input for these classic baking trials is high, as well as specific baking skills are required to obtain comparable and reliable results. To minimize the previously mentioned challenges, an in-line kneading, proofing, and baking process in a conventional rheometer was used and a microscale method was developed to determine both flour-specific baking performance and leavening-dependent volume increase without sample transfer. The results show a direct comparability of standard baking tests and the microscale method with yeast. In a second step the influence of the commercial used acidifying agent in baking powder D-(+)-Glucono-1,5-lactone (GDL) was compared to l-galactono-1,4-lactone (GGL), an alternative that has the potential to be biotechnologically produced from pectin-rich plant biomass residues. The results showed that GGL produced carbon dioxide slower then GDL and could therefore be interesting for frozen or slow rising products especially for protein rich flours.

Investigation of the Thermal Stability of Proteinase K for the Melt Processing of Poly(l-lactide)

The enzymatic degradation of aliphatic polyesters offers unique opportunities for various use cases in materials science. Although evidently desirable, the implementation of enzymes in technical applications of polyesters is generally challenging due to the thermal lability of enzymes. To prospectively overcome this intrinsic limitation, we here explored the thermal stability of proteinase K at conditions applicable for polymer melt processing, given that this hydrolytic enzyme is well established for its ability to degrade poly(l-lactide) (PLLA). Using assorted spectroscopic methods and enzymatic assays, we investigated the effects of high temperatures on the structure and specific activity of proteinase K. Whereas in solution, irreversible unfolding occurred at temperatures above 75-80 °C, in the dry, bulk state, proteinase K withstood prolonged incubation at elevated temperatures. Unexpectedly little activity loss occurred during incubation at up to 130 °C, and intermediate levels of catalytic activity were preserved at up to 150 °C. The resistance of bulk proteinase K to thermal treatment was slightly enhanced by absorption into polyacrylamide (PAM) particles. Under these conditions, after 5 min at a temperature of 200 °C, which is required for the melt processing of PLLA, proteinase K was not completely denatured but retained around 2% enzymatic activity. Our findings reveal that the thermal processing of proteinase K in the dry state is principally feasible, but equally, they also identify needs and prospects for improvement. The experimental pipeline we establish for proteinase K analysis stands to benefit efforts directed to this end. More broadly, our work sheds light on enzymatically degradable polymers and the thermal processing of enzymes, which are of increasing economical and societal relevance.

Controllably crosslinked dual enzymes enabled by genetic-encoded non-standard amino acid for efficiently enantioselective hydrogenation

In traditional method for preparing crosslinked enzymes aggregates using glutaraldehyde, random linkage is inevitable, which often destroys the enzyme active sites and severely decreases the activity. To address this issue, using genetic encode expanding, nonstandard amino acids (NSAAs) were inserted into enzyme proteins at the preselected sites for crosslinking. When aldehyde ketone reductase (AKR), alcohol dehydrogenase (ADH) and glucose dehydrogenase (GDH) were utilized as model enzymes, their mutants containing p-azido-L-phenylalanine were bio-orthogonally crosslinked with diyne to form crosslinked dual enzymes (CLDEs) acting as a cascade biological oxidation and reduction system. Then, the resultant self-purified CLDEs were characterized using matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS), scanning electron microscopy (SEM), and confocal laser scanning microscopy (CLSM), etc. In the asymmetric synthesis of (S)-1-(2,6-dichloro-3-fluorophenyl) ethanol using CLDEs, high product yield (76.08%), ee value (99.99%) and reuse stability were achieved. The yield and ee value were 12.05 times and 1.39 times higher than those using traditional crosslinked enzyme aggregates, respectively. Thus, controllable insertion NSAAs in number and location can engender reasonable linkage and metal-free self-purification for target enzyme proteins. This facile and sustainable method could be further expanded to other dual and multienzyme systems for cascade biocatalysis.

Wheat gluten proteins phosphorylated with sodium tripolyphosphate: Changes in structure to improve functional properties for expanding applications

Poor solubility of wheat gluten proteins (WG) has negative impact on functional attributes such as gelation and emulsification, which limits it use in the food industry. In this study, WG underwent different degrees of phosphorylation using sodium tripolyphosphate (STP). Phosphoric acid groups were successfully incorporated in the WG via covalent bonding (C–N–P and C–O–P) involving hydroxyl and primary amino groups from WG. The introduction of phosphoric acid groups increased the negative charge of phosphorylation-WG, which caused the enhancement of electrostatic repulsion between proteins and reduced the droplet size in emulsions, thereby allowing proteins to be more efficiently dispersed in the solution system. The change of structure induced with phosphorylation improved hydration of protein, making the WG with higher solubility, thereby resulting in the improvement of its emulsification, foaming, thermal stability, and rheological properties. Therefore, WG can be modified by phosphorylation which caused an overall improvement of functional properties, thus facilitating the expansion of WG applications.

•

Functional properties of WG were enhanced with phosphorylation (PP).

•

The P2p at 133.1 eV and the bonds of C–O–P and C–N–P were found in PP-WG.

•

Greater ζ-potential, solubility, viscosity, foaming in PP- WG.

•

Phosphorylation increased WG thermal stability and gel properties.