Structural characterization of pectin obtained by different purification methods

Structural analyses of apricot pectin polysaccharides

Apricot pectin polysaccharides' fine structure was performed using HPSEC, HPAEC-PAD, GC-MS, NMR and FTIR spectroscopies. Purified pectin fraction (F1AP) was composed of D-galacturonic acid, L-rhamnose, D-arabinose and D-galactose, Mw ∼ 1588 kDa. F1AP was eluted by water and with 0.2 M NaCl from DEAE Sepharose fraction resulting in two distinct fractions, F1AP1 and F1AP6, with different structures, molecular weights, and conformations, providing insights into their structural diversity. F1AP1 neutral properties were related to its association with protein. F1AP1 had a backbone of (1 → 4)-linked-D-galacturonic acid and (1 → 2)-linked-L-rhamnopyranosyl residues branched with arabinogalactan including multiple glycosidic linkages of T-α-Araf, 3-α-Araf, 5-α-Araf, T-α-Arap, 2-α-Arap, t-Galp, 2-Galp, 3-Galp, 4-Galp, 6-Galp, 2,4-Galp, 3,4-Galp, 3,6-Galp and 4,6-Galp side chains, having methyl and acetylated groups, and a high molecular weight (1945 kDa). The Mark-Houwink exponent was 0.276, indicating a compact spherical conformation. While the other F1AP6 fraction consists predominately of less methylated HG regions of pectin polysaccharides. The molar mass of this fraction was 117.5 kDa, which adopted a stiffer and random coil conformation. This knowledge allows us to evaluate how the balance of chemical structure and physical properties of the two pectin domains may manifest itself in the isolated structure of apricot pectin and its applications.

Biopolymer-Based Nanomedicine for Cancer Therapy: Opportunities and Challenges

Cancer, as the foremost challenge among human diseases, has plagued medical professionals for many years. While there have been numerous treatment approaches in clinical practice, they often cause additional harm to patients. The emergence of nanotechnology has brought new directions for cancer treatment, which can deliver anticancer drugs specifically to tumor areas. This article first introduces the application scenarios of nanotherapies and treatment strategies of nanomedicine. Then, the noteworthy characteristics exhibited by biopolymer materials were described, which make biopolymers stand out in polymeric nanomedicine delivery. Next, we focus on summarizing the state-of-art studies of five categories of proteins (Albumin, Gelatin, Silk fibroin, Zein, Ferritin), nine varieties of polysaccharides (Chitosan, Starch, Hyaluronic acid, Dextran, cellulose, Fucoidan, Carrageenan, Lignin, Pectin) and liposomes in the field of anticancer drug delivery. Finally, we also provide a summary of the advantages and limitations of these biopolymers, discuss the prevailing impediments to their application, and discuss in detail the prospective research directions. This review not only helps readers understand the current development status of nano anticancer drug delivery systems based on biopolymers, but also is helpful for readers to understand the properties of various biopolymers and find suitable solutions in this field through comparative reading.

Properties of lime peel pectin as mainly influenced by ethanol and protein-based purification methods

BACKGROUND

Lime peel, obtained from juice factory waste, is considered as a source of pectin. Lime peel pectin samples, extracted by three extraction procedures of 90 °C heating for 120 min, 90 °C heating for 90 min and then 32 min of ultrasound, and 80 °C heating for 60 min and then 22 min of ultrasound, and purified by two methods using ethanol and sodium caseinate (SC), were prepared and characterized.

RESULTS

The results showed that the purification method significantly affected the lime pectin samples properties. Pectin samples purified with SC had a transparent and film-like appearance, whereas the ethanol-purified pectin samples showed an amorphous and opaque appearance. Pectin samples purified with ethanol showed higher extraction recovery (approximately 20%), whereas the lowest pectin yield was observed for the purification with SC (approximately 10%). Although SC purification did not enhance the pectin yield, it diminished the level of 'non-pectin' components and resulted in purer pectin. The bands at 1045-1076 cm-1 , relating to neutral sugars, had higher intensities in ethanol-purified pectin samples, indicating their higher sugar contents. Also the samples purified with SC exhibited more thermal stability, probably as a result of the presence of protein in their structure.

CONCLUSION

In the present study, under the same or varying extraction conditions, the most important element distinguishing pectins in terms of appearance, physicochemical, thermal and Fourier transform infrared characteristics was the type of purification method. Purification with SC may result in pectins with more non-esterified galacturonic acids from the homogalacturonan fraction. © 2023 Society of Chemical Industry.

The effect of apple pomace powder and calcium ions on selected physicochemical properties of freeze-dried carrot-orange-ginger snacks

BACKGROUND

This study aimed to determine the effect of various amounts of dried apple pomace (AP) powder and calcium ions on selected physicochemical properties of restructured freeze-dried snacks in comparison with products obtained with low-methoxyl pectin (LMP). The material was prepared using frozen carrot, orange concentrate, ginger, water, and various concentrations of AP (1, 3, 5%) and calcium lactate (0, 0.01, 0.05%). The reference samples were without additives, and with 0.5 or 1.5% of LMP combined with 0.01% of calcium lactate.

RESULTS

The material was studied in terms of water content and activity, hygroscopic properties, structure, texture, color, and polyphenol content (TPC), and antioxidant activity. The addition of AP resulted in reducing water activity and porosity. As a consequence of the increasing density of the structure, the reduction of hygroscopic properties by up to 16% followed the increasing amount of AP. Apple pomace and calcium ions strengthened the structure. The addition of 3% and 5% of AP gave a hardening effect close to or better than 0.5% LMP. Because of the pigment dilution, LMP caused significantly greater total color change than AP. The incorporation of AP also increased TPC and enhanced antioxidant activity in comparison with the reference materials by up to 18%.

CONCLUSION

The results showed that dried AP powder can be applied successfully as an additive enhancing stability, texture and bioactive compound content, thus fortifying the physicochemical properties of restructured freeze-dried fruit and vegetable snacks. © 2023 Society of Chemical Industry.

Tailored ethylenediamine-functionalized graphene oxide membrane on kaolin hollow fibers for pectin concentration

Pectin is a valuable product that can be extracted from waste fruit peels. Here we propose the use of graphene oxide (GO)-based membranes for pectin concentration. The synthesized GO was functionalized with ethylenediamine (EDA) to molecularly design the GO framework. Kaolin hollow fibers with asymmetric pore distribution were used as a porous substrate for GO/EDA deposition. A GO/EDA layer with a thickness of 2.86 ± 0.24 μm was assembled on the substrate by the simple vacuum-assisted deposition method. After GO/EDA depositions, the water permeance of the pristine kaolin hollow fibers reduced from 8.46 ± 0.17 to 0.52 ± 0.03 L h-1·m-2·kPa-1. A pectin aqueous extract from orange peels was filtered at cross-flow mode through the prepared membranes and the steady-state fluxes through pristine and GO/EDA-coated hollow fibers were 56 ± 2 and 20 ± 3 L h-1 m-2, respectively. The GO/EDA-coated membrane presented greater pectin selectivity than the pristine hollow fiber. The GO/EDA-coated hollow fiber concentrated the galacturonic acid, phenolic, and methoxyl contents in 19.5, 17.4, and 29.2 %, respectively. Thus, filtration through the GO/EDA-based membrane is a suitable alternative for pectin concentration.

Effect of localized electrochemical pH and temperature synergistic modification on the structural and antibacterial properties of pectin/polyvinyl alcohol/zinc oxide nanorod films

Two low-methoxy pectins (LMPs) were obtained by local electrochemical pH modification using an H-type double-layer water bath sealed electrochemical cell at the voltage of 180 V for 3 h. The weight-average molecular weight (Mw) of citrus peel pectin (CPP) prepared in the anodic part at room temperature (CPP-A5/RT) and in the cathodic part at 5 °C (CPP-C5/RT) were 346 kDa and 328 kDa, respectively, and the degrees of methylation (DM) were 36.8 % and 11.9 %. Moreover, the second-order kinetic model was most appropriate for the degradation processes, as free radicals were generated in the anodic part and β-elimination occurred in the cathodic part. Subsequently, CPP-A5/RT and CPP-C5/RT were utilized to fabricate food packaging film blending with polyvinyl alcohol (PVA), bcZnO (ZnO coupled with bentonite and colophony) nanorods, and Ca2+ ions by casting method. Then the prepared films were studied for their ability to maintain the freshness of strawberries. The addition of Ca2+ ions and bcZnO nanorods increased the thickness, water contact angle (WCA), and mechanical properties of the composite films, while decreased water vapor permeability (WVP). Therefore, the CPP-based films, supplemented with bcZnO nanorods and crosslinked with Ca2+ ions by "egg-box" model, can serve as an antibacterial food packaging material for food preservation.

Modulation of the Gut Microbiota Structure and Function by Two Structurally Different Lemon Pectins

Pectins are plant polysaccharides consumed as part of a diet containing fruits and vegetables. Inside the gastrointestinal tract, pectin cannot be metabolized by the mammalian cells but is fermented by the gut microbiota in the colon with the subsequent release of end products including short-chain fatty acids (SCFA). The prebiotic effects of pectin have been previously evaluated but reports are inconsistent, most likely due to differences in the pectin chemical structure which can vary by molecular weight (MW) and degree of esterification (DE). Here, the effects of two different MW lemon pectins with varying DEs on the gut microbiota of two donors were evaluated in vitro. The results demonstrated that low MW, high DE lemon pectin (LMW-HDE) altered community structure in a donor-dependent manner, whereas high MW, low DE lemon pectin (HMW-LDE) increased taxa within Lachnospiraceae in both donors. LMW-HDE and HMW-LDE lemon pectins both increased total SCFAs (1.49- and 1.46-fold, respectively) and increased acetic acid by 1.64-fold. Additionally, LMW-HDE lemon pectin led to an average 1.41-fold increase in butanoic acid. Together, these data provide valuable information linking chemical structure of pectin to its effect on the gut microbiota structure and function, which is important to understanding its prebiotic potential.